How can I create manual Y-axis labels in a multiple system report?

A similar question was asked by Lutz1410 on 3/30/07, but it doesn't seem that this was finally resolved.  I'll try to ask the question in a different way.
I created a graph in View with 3 axis systems in the "multiple systems" mode, then transferred this to Report.  I would like to apply manual scaling and text to each of the 3 axis systems, however if I change either of these parameters they are applied to all 3 Y-axes.  In other words, I end up with 3 axes having exactly the same text labels and scaling.
1. For the axis text, is there a delimiter that can be used in the axis text field to tell Report that the first text value is for the first Y-axis, the 2nd value is for the next axis, etc?
2. For the scaling, is it possible to have separate scales for each Y-axis?
Of course, a workaround is to create 3 independent graphs in Report, but this is less convenient.
Thank you,
Craig

Hi Craig,
If you want to apply different manual scaling parameters to each of the stacked Y axes, then you need to use 3 separate Y axes.  If you want to display a curve-specific text to each of the stacked graphs, this you can do with a DIAdem expression:
@ChnName(CCN)@@         channel name of each curve
@ChnDim(CCN)@@            channel unit of each curve
@ChnComment(CCN)@@   channel description of each curve
The corresponding value for each curve will automatically display at the correct vertical spot next to its curve.
Brad Turpin
DIAdem Product Support Engineer
National Instruments

Similar Messages

  • How can I create a master PDX that pulls from multiple other PDXs?

    I process aviation maintenance manuals, with the individual manuals having their own PDX. How can I create a master PDX that pulls from the individual PDXs?
    I have access to myriad versions of Windows and Acrobat so there's that...

    I’ve got 100s of manuals each with their own PDX. I’ve been asked to create a master PDX that in effect combines all of the individual PDXs into a single (cross-manufacturer, cross-fleet, cross-manual-type) searchable PDX that can be easily updated.

  • How can I create a website on iweb if my operating system is leopard?

    I'm trying to create a website using iweb. Everytime I try to open an account with mobileMe I can't because I guess mobileMe will no longer function after June 30 I think. Can I still open the account and publish a website since it's still May?

    No.  MobileMe stopped accepting new sign ups a long time ago in preparation for it no longer being here at the end of June.  If you already have a MobileMe account, then you can continue to publish there until the end of June, but otherwise no.
    You can still publish a website though, but just use a proper host such as GoDaddy or HostExcellence or a lot of the others that are out there.

  • How can I create a new label using Pages and Avery Labels products?

    How can I create a new label using Avery LAbels and PAges on an imac?

    Contacts prints to Avery labels.
    Otherwise just open the appropriate Word template from Avery's website, in Pages.
    Peter

  • How can I create a new label?

    Please, I would like to know how can I create a new label in Bridge?

    Contacts prints to Avery labels.
    Otherwise just open the appropriate Word template from Avery's website, in Pages.
    Peter

  • How can I create DVD Label using Photoshop Elements 10?

    How can I create DVD label using Photoshop Elements 10?
    Richard

    You can create the design for a DVD label in Create>More Options. Once you have the label set up, you would copy it to a template for the labels you plan to use. (The PSE template makes one label, while most printed labels are two-up.)

  • How can I create mailing labels? I'm used to windows' label process

    How can I create mailing labels using pages?  I'm very familiar with window's way of doing this and can't find a tool for labels.  please help!

    Post in the Pages froumwhere those experts are:
    https://discussions.apple.com/community/iwork/pages

  • Using pages, how can I create a label run from contacts

    Using pages, how can I create a label run from contacts?

    You mean you want to use XML to create a flat file, right? Not that the database is using XML in some way? If so, why do you want to use XML?

  • How can I create a toolbar

    How can I create a tool bar with a functions defined by the user .? For example on the case of explorer on windows there exists a tool bar which can capable to opt tools which been pre determined .How can this be make possible in my application using Labview ?

    Well, a pop up menu is not like a tool bar, but you can find one example here.
    In general, if you want the menu to open more screens, you will need to create and call those as subVIs.
    If this still doesn't help you, I suggest you explain your problem in more detail, and maybe post a screenshot of the what you want to get (no BMPs, please).
    To learn more about LabVIEW, I suggest you try searching this site and google for LabVIEW tutorials. Here and here are a couple you can start with. You can also contact your local NI office and join one of their courses.
    In addition, I suggest you read the LabVIEW style guide and the LabVIEW user manual (Help>>Search the LabVIEW Bookshelf).
    Try to take over the world!

  • HT204053 how can i create multiple icloud accounts for my family members

    how can i create multiple icloud accounts for my family members

    Thanks...  I appreciate the reply.  Since I wrote the previous email, I actually went and changed my apple id (the main id) and the documentation I looked at said iCloud will set mail up automatically(?)...  I had it working before. 
    Also, I tried to manually set up the ID via the Mail Accounts screen(s) and I can't figure out what my server information is...  Pop or Imap?  What's the outgoing server and the incoming server?
    I typically have never had problems setting up mail accounts (in apple mail) with no problem.
    Can anyone point me in the right direction?
    Thanks in advance!

  • How can I create a Commercial Invoice or similar document in SAP ByD?

    How can I create a Commercial Invoice or similar document in SAP ByD?
    Our company has recently implemented ByD, but we can't figure out how to create a commercial invoice for shipping/customs purposes. I know that the German version of ByD allows for "Export Declarations" which is pretty much the same as a commercial invoice, but the U.S. version doesn't have this document/function.
    Any suggestions? I would appreciate any help.
    By the way, a commercial invoice contains:
    1. The shipperu2019s complete information: Contact name, company name, complete address and tax identification number.
       2. The recipientu2019s complete information: Contact name, company name, complete address and phone number.
       3. The buyeru2019s information (the person to whom the goods are sold by the seller) if different from the recipient: Contact name, company name, complete address and phone number.
       4. The shipment tracking number, air waybill number or bar-code label number.
       5. An accurate description of the contents in your shipment that includes the following details:
    What the product is
    What material the product is made of
    What the productu2019s Schedule B or HTS code is
    What the productu2019s intended use is
    What the productu2019s country of manufacture is
    What the productu2019s parts or serial numbers are (if applicable)
    What the productu2019s quantity and unit of measure are
    What the productu2019s value is, per unit and in total
    Thanks,
    Chris

    May I suggest that you ask this question in the customer forums in the Business Center at [http://sme.sap.com|http://sme.sap.com]
    Best regards, Christian

  • How can i create a new password?

    I forgot my password, how can i create a new one?

    On Lion or Mountain Lion, you use the following technique to reset the Administrators password:
    Boot to your Recovery Partition, by holding down the Option key while starting, and then selecting the Recovery HD as the boot choice.
    Once booted, at the top of the screen is a menu ..., select Utilities / Terminal from the menu bar.
    In the Terminal window, type “resetpassword” (without the quotes) and press return. A “Reset Password” window will open. Select your boot volume (your SSD drive) if it is not already selected. Select your administrators username from the menu labeled “Select the user account” if it is not already selected. Follow the prompts to reset the password. Restart the computer from the apple menu.

  • How can i create a new and tableless database using database configuration

    How can i create a new and tableless database using database configuration

    How can i create a new and tableless database using database configuration
    Just don't install the sample schemas. See the installation guide
    http://docs.oracle.com/cd/E11882_01/server.112/e10831/installation.htm
    Using the Database Configuration Assistant
    When you install Oracle Database with the Oracle Universal Installer, the sample schemas are installed by default if you select the Basic Installation option. Selecting the sample schemas option installs all five schemas (HR, OE, PM, IX, and SH) in the database. If you choose not to install the sample schemas at that time, you can add them later by following the instructions in section "Manually Installing Sample Schemas".
    Choose a custom install and don't install the sample schemas.
    All other schems/tables installed are REQUIRED by Oracle

  • How can I create a method with throws  instruction

    Hello Everybody!
    How can I create this method inside WebDynpro.
    I enter "throws CloneNotSupportedException" manually an it removes always.
    What is wrong ?
    public java.lang.Object clone( ) throws CloneNotSupportedException{
        //@@begin clone()
         __Tdag__Is_Charactconfig that= (__Tdag__Is_Charactconfig)super.clone();
           return that;
        //@@end
    Regards
    sas

    I only checked in my 7.1 IDE and there this section exists.
    If it does not exist in your IDE, just create the method manually in the //@@begin others ... //@@end user-coding-area at the end of the controller class. This solves the issue for methods that are called from inside the controller. For public methods to be called from other controllers, this will not help.
    Armin

  • How can I create a custom feature, which will automatically take a custom master page while creating a site ?

    Hello ,
    I am new in Sharepoint development . I am trying to create a Sharepoint feature to Activate master page automatically while creating the site .Below mentioned code I am using to do this . 
    But When I am creating any site under site collection .It is not applying automatically . I have to manually Activate that feature . 
    SPSite site = properties.Feature.Parent as SPSite;
    SPWeb rootWeb = site.RootWeb;
    Uri masterUri = new Uri(rootWeb.Url + "/_catalogs/masterpage/mycustom.master");
    rootWeb.MasterUrl = masterUri.AbsolutePath;
    rootWeb.CustomMasterUrl = masterUri.AbsolutePath;
    rootWeb.Update();
    How Can I create a feature that can activate the master page at same time of site creation under Site collection ,Without any manual work .. 
    Thanks in Advance .. 

    Hi,
    You can associate master page during feature activation as follows:
    http://social.technet.microsoft.com/wiki/contents/articles/19933.sharepoint-2010-set-a-custom-master-page-during-feature-activation.aspx
    Then, you can use feature stapling to apply automatically on site creation:
    http://blogs.msdn.com/b/kunal_mukherjee/archive/2011/01/11/feature-stapling-in-sharepoint-2010.aspx
    Thanks,
    Avni Bhatt

Maybe you are looking for

  • Unable to Clear Vendor open items in F.13

    Hi All, We have few vendor codes, where all are having some normal open items as well as Spl GL open items and net balance is 0. When we do clearing with F-44, No issues at all But when we try to clear them through F.13, system is grouping normal ope

  • Cannot use Forms in Acrobat 9.3 Pro

    It was working fine, then I had someone else working on the forms for a large PDF, they were almost finished, and then said they couldn't add fields anymore. So they closed and saved it, then i started looking on my end and sure enough, we can no lon

  • If I bay time capsule, I can use ma tv with smart tv and wi fi to watch my films on capsule?

    If I bay time capsule, I can use ma tv with smart tv and wi fi to watch my films on capsule?

  • Using Ref Cursor in procedure in place of normal cursor

    Hi, I have a procedure where i have the follwoing cursors declared, CURSOR c_wip IS SELECT tdvalue FROM tabledetails WHERE tdidcode = 'PEL_DASHBOARD' AND tdkey LIKE 'WIP_QUEUES%'; CURSOR c_pending IS SELECT tdvalue FROM tabledetails WHERE tdidcode =

  • Selecting a portion of an image

    Hello I am having an image displayed in the front panel. Now i want to select a portion of the image such that when i select that particular portion in the front panel , the result is displayed. Is this possible? AT present what i have done is, i tak