How can I create my own document type
Hello
I want to know if we can create our own document types. With
coloring methods...
Beacause I want to have a coloring methode for my templates,
whose I edit them a lot of with dreamweaver. And it will be simply
if they can have theirs colors.
Sorry for my bad english, but I'm French... ;)
Thank for all
1. in factory sales we are using T.code J1IIN. that time it fetch which type of Billing docu;ment. and how we can see that document. where it isconfigured
You cannot view the Billing type while creating the excise invoice.In SPRO,Tax on Goods Movement-->India >Business Transactions> Outgoing Excise Invoices -->Assign Billing Type to Delivery Types here you maintain the Delievry and Billing types with which you cancreate Excise Invoices.
2.Is there any copy control system between commercial Invoice to Excise invoice?
There is no copy control and the above step controls the relation between the billing and excise invoice.
3.How I can create my own Excise Invoice Document type.
You cannot create your own Excise Invoice Document type but you can create a Sub Transaction type and assign it while creating Excise Invoice to differentiate and pass the values to a different GL.
Similar Messages
-
How can I create my own refernce type?
I would like to create my own reference type. Like it has been done in the Configuration File VIs, provided by NI in the default LabVIEW Utility Config.llb.
The reference for the refnum is based on a Enum type. I would like to create something similar and have my own picture that represent my custom reference. However I am not able to create the Enum containing a picture instead of a text string.
Does anyone know how to do that?
Maybe it is something reserved to NI programmer...
Thanks,
Nitrof> I would like to create my own reference type. Like it has been done
> in the Configuration File VIs, provided by NI in the default LabVIEW
> Utility Config.llb.
The GOOP documentation probably explains how to do this, and I believe
they have tools to help you out. It is a datalog refnum containing an
enum with your object's name -- to make it unique -- and possibly a
decoration in there too covering the enum. I don't remember the details
with the picture. You might need to take the enum into the control
editor via Customize and paste the picture there. Then close, saving
and put that enum into the datalog refnum.
Greg McKaskle -
I have the retail iCloud account. How can I delete it? And how can I create my own account?
Welcome to Apple Support Communities
To delete the iCloud account, open Settings > iCloud, scroll to the bottom and select Delete account. Then, log in with the Apple ID you want to use with iCloud -
How can i create my own component
hello all,
how can i create my own componet,
say for example i want to create my own JTextField.
give me links, or give me a examples
thanks
dayahttp://www.onjava.com/pub/a/onjava/2004/08/11/desktop.html
-
How can i create my own t-code
hi ,
how can i create my own t-code with a specified applications? may i know the t-code for create a t-code
Edited by: amarnath popuri on Nov 24, 2008 10:53 AMHi amarnath popuri
Use t-code SE93 to create a t-code.
Check below link.
http://help.sap.com/erp2005_ehp_02/helpdata/EN/43/2c43b427bf601fe10000000a422035/frameset.htm
Regards
Ashok -
How can I create my own toolbar like SmartBar??
I would like to know how can I create my own toolbar that works like the default smart bar.
I need to work with a smart bar, but i have to create it, and it has to work like the default one.
the smart bar should be able to navigate along my different forms/canvases.
Can someone help me??
With regards
Tiago ValadorTiagor,
you can't change the smart bar. All you can do is to create a hrizontal toolbar canvas.
Frank -
How can i create my own file from the Adobe Export PDF to Word ?
How can I create my own file from the file of the Adobe Export PDF to Wodrd?
If there is handwritten content in your PDF then ExportPDF can't convert that to word.
~Deepak -
New to CS 6....how can I create a default "print document" letter-size artboard ?
Nothing has changed in CS6 with respect to creating Artboards. File>New and choose Print in the document type profile.
-
How can I create my own border styles?
Working on a Mac in Numbers 3.2.2 how can I create 1 point line as a border? I find the default selection harsh, distracting.
Appreciated.Hi Wanapitei,
Click on the "bullseye" (top left of the table) to select the whole table.
Format Panel > Cell > Border > All Borders
Save as Template.
Regards,
Ian. -
How can i create my own apps on iPhone ?
Dear all
Plz how can i create my on apps and publish it on app store ? (From my iphone ) not from mac devise
RegardsYou don't.
All app development requires a Mac. -
How can I create my own shortcut to an app
How do I create my own shortcut to an app on my Mac Pro
Here are some more keyboard short cuts you may find useful including a different way of creating an Alias.
Use whichever you find the easiest.
http://support.apple.com/kb/PH10563 -
How can I create my own tag name while creating a partition table.
I have X4500 running Solaris 10. I have formatted a disk and created partition table as given below.
Specify disk (enter its number): 0
selecting c0t0d0
[disk formatted]
/dev/dsk/c0t0d0s0 is part of active ZFS pool zpool1. Please see zpool(1M).
FORMAT MENU:
disk - select a disk
type - select (define) a disk type
partition - select (define) a partition table
current - describe the current disk
format - format and analyze the disk
fdisk - run the fdisk program
repair - repair a defective sector
label - write label to the disk
analyze - surface analysis
defect - defect list management
backup - search for backup labels
verify - read and display labels
inquiry - show vendor, product and revision
volname - set 8-character volume name
!<cmd> - execute <cmd>, then return
quit
format> partition
PARTITION MENU:
0 - change `0' partition
1 - change `1' partition
2 - change `2' partition
3 - change `3' partition
4 - change `4' partition
5 - change `5' partition
6 - change `6' partition
select - select a predefined table
modify - modify a predefined partition table
name - name the current table
print - display the current table
label - write partition map and label to the disk
!<cmd> - execute <cmd>, then return
quit
partition> print
Current partition table (original):
Total disk sectors available: 1953508749 + 16384 (reserved sectors)
Part Tag Flag First Sector Size Last Sector
0 usr wm 34 4.00GB 8388641
1 usr wm 8388642 2.00GB 12582945
2 usr wm 12582946 200.00GB 432013345
3 usr wm 432013346 175.00GB 799014945
4 usr wm 1166180386 375.43GB 1953508748
5 usr wm 799014946 175.00GB 1166016545
6 usr wm 1166016546 80.00MB 1166180385
8 reserved wm 1953508749 8.00MB 1953525132
partition>
I am unable to specify my own tag name. How can I change the tag name to one of my interest.
I need to create 3 partitions as told below
partitions:
/earth
/mars
/work
/earth and /work should be roughly equal in size, /mars should be twice the size of the others, if that is possible. If not 3 partitions of equal size will do.
Please, help me .
Thank you.Exactly 1TB? Slightly under/slightly over?
Traditional Solaris disk labels are in VTOC format, but this format cannot describe disks larger than 1TB. So EFI labels must be used on disks larger than 1TB. Setup is slightly different.
Are these physical disks or LUNs from a SAN array? If they are array LUNS, it is often the case that they don't have a Sun label of any type. So...
#1 Apply a Solaris label
If the LUNS don't have a label (when selected in 'format', it gives a warning that no label is present and offers to apply a label immediately). When run non-interactively, format assumes "yes" for any questions. So all you'd have to do is select every disk to have it apply labels to any unlabled disk. Run 'format' once and find the highest number (maybe it's 50 for you). Create a text file that looks like this:
disk 1
disk 2
disk 3
disk 50Then feed that to format like this:
# format -f /tmp/disklist or whatever you've named the file.
#2 Apply the partition layout to all disks you want.
You asked if you should do the same procedure, but I don't see that you've actually done anything above other than print out the existing layout. Take one of your 48 drives and partition it the way you want manually (set the slices to the sizes that you want). Then you can copy the layout of that disk to others. You only want to do this between disks/LUNs of the same size. As an example, if you've explicitly partitioned c1t0d0 and you want to apply this to c1t1d0, do this:
# prtvtoc /dev/rdsk/c1t0d0s2 | fmthard -s - /dev/rdsk/c1t1d0s2Repeat for all of your other disks.
Darren -
How can I create a new documents folder
Anyone know how I can create a new documents folder in my home folder? I accidently deleted it. Nothing was in it, so I don't need to recover it. I just want a new empty documents folder.
Actually, never mind. I solved the problem myself.
At first I created a folder in the sidebar, and it didn't have the documents icon on it. I just solved the problem by deleting that icon, then creating a new folder in the main window, naming it "documents", and then the documents icon appeared. Then I dragged it to the sidebar and it created a copy there.My mistake. I was able to create a new documents folder without any throuble.
-
UWL Help - How can i create my own task within the Enterprise Portal
Dear all,
I am currently working with UWL .
I have tried the customization and those stuffs associated with UWL , and it is working properly.
My current issue is , how can create my own task within the Portal ( not using Ad Hoc Workflow , which is present in Portal) ?.
If i can create my own task within portal by API or using another method , then How can i add that task link within the drop down box that is present in the Collaboration launch pad and Mytask Workset.?
Is there any API regarding UWL (which is useful for creation of custom tasks in Portal using Developer Studio by means of Portal Application Creation) ?
How can i add that custom task in the drop down ?.
I have tried the customization of existing UWL.
I shall be grateful to those who can help me to solve this issue with links regarding the solution of my problem's.
with regards
Kishor GopinathanHi Kishore,
I am trying to do the same thing. When i am creating Collaboration Task, it has standard templates in the dropdown like "Single Step" and "Multi-Step" etc., If i want to create my own Custom Task Template and display in that dropdown, how can i do that? Your help is really appreciated.
Thanks
Vijay -
How can I create a XML document from a DOM?
Hello,
I'm using the parser for C, version 2 in the DOM modus. How can I dump the object model to a (XML) string after changing some field?
Do I need to create my own function or is there a function in the DOM interface??You need to create your own function. The Java XML parser has such a function
and we'll probably add one in a future release as well.
Oracle XML Team
Maybe you are looking for
-
Asset Closure - Open PO.
Dear All, Does there any possibility exists in the system by which avoid to close asset unless Open quantity purchase orders exists in the system. Referred Note: 13290. System showing warning message for either open, or closed purchase orders exist a
-
How to import a dmp file in OWB process?
Hi Expert. We'd like to import a dmp file into the database using OWB before doing some data cleasing. Is it possible to call "imp" in the OWB process flow, or if there's other alternatives? Thank you! Jeff
-
Hi Experts, I am doing an Interface. This should be executing daily one time. In this I am reading file from SAP Server, and uploading data. Now I got a problem if there is more then one file how can I red. The file naming is Date & time stamp. How c
-
Classes used in BSP application 'HAP_DOCUMENT'
Hi, 'CL_BSP_HAP_DOCUMENT_UI' - this is a class used in BSP Application 'HAP_DOCUMENT'. do anyone have a document explaining the Attributes and method of this particular class ? or any website where i can go and find the use of each and every attribut
-
How to Disply all customers and all amounts .
I have customer numbers and respective amounts in my query I want to do one customer amount divide by 100 and I want to display all customer numbers and amounts including the customer number devide by 100 also how? Can any body let me know please. R