How can I create my own network in my dorm? (Using Airport Extreme + ethernet cable) (To connect AppleTV and Sonos successfully with no restrictions)
So I recently set up my Apple Airport Extreme Router in my dorm and have a BIG problem. It works and lets me do most things on my own network, but when I try doing things on my external devices connected to the network (Apple TV and Sonos Hi-Fi Sound system) the connection just doesn't go through. I'll give two examples.
After setting up my Sonos system successfully, I was prompted to update the software so I can use options that need internet access such as pandora and soundcloud. It just didn't work at all. It gave me an error that had to do with internet connection. I tried numerous times.
On Apple TV, I used AirPlay on my phone to mirror what I was seeing on my phone and then tried to play youtube, soundcloud, and other music apps and none of them worked.
My guess is that it has something to do with my school's restrictions on streaming or downloading. But none of this stuff is actually restricted so I know it must be due to the transfer of information between my network (which is connected to the school's network I am assuming, since my ethernet port is in my dorm wall) and my external devices.
Honestly I'll probably get the "Your school has these restrictions answer", but I know there is a way to fix this and I really want the answer!!
Thanks,
Andres
You don't need the AirPort Express to do this.
You can set your Mac to share it's wired connection over the wireless port and the iTouch can connect directly to the Mac.
You could also do it with the AirPort Express, but you don't need to - it's overkill for what you've described.
Similar Messages
-
I have the retail iCloud account. How can I delete it? And how can I create my own account?
Welcome to Apple Support Communities
To delete the iCloud account, open Settings > iCloud, scroll to the bottom and select Delete account. Then, log in with the Apple ID you want to use with iCloud -
How can i create my own component
hello all,
how can i create my own componet,
say for example i want to create my own JTextField.
give me links, or give me a examples
thanks
dayahttp://www.onjava.com/pub/a/onjava/2004/08/11/desktop.html
-
How can i create my own t-code
hi ,
how can i create my own t-code with a specified applications? may i know the t-code for create a t-code
Edited by: amarnath popuri on Nov 24, 2008 10:53 AMHi amarnath popuri
Use t-code SE93 to create a t-code.
Check below link.
http://help.sap.com/erp2005_ehp_02/helpdata/EN/43/2c43b427bf601fe10000000a422035/frameset.htm
Regards
Ashok -
How can I create my own toolbar like SmartBar??
I would like to know how can I create my own toolbar that works like the default smart bar.
I need to work with a smart bar, but i have to create it, and it has to work like the default one.
the smart bar should be able to navigate along my different forms/canvases.
Can someone help me??
With regards
Tiago ValadorTiagor,
you can't change the smart bar. All you can do is to create a hrizontal toolbar canvas.
Frank -
How can i create my own file from the Adobe Export PDF to Word ?
How can I create my own file from the file of the Adobe Export PDF to Wodrd?
If there is handwritten content in your PDF then ExportPDF can't convert that to word.
~Deepak -
How can I create my own border styles?
Working on a Mac in Numbers 3.2.2 how can I create 1 point line as a border? I find the default selection harsh, distracting.
Appreciated.Hi Wanapitei,
Click on the "bullseye" (top left of the table) to select the whole table.
Format Panel > Cell > Border > All Borders
Save as Template.
Regards,
Ian. -
How can i create my own apps on iPhone ?
Dear all
Plz how can i create my on apps and publish it on app store ? (From my iphone ) not from mac devise
RegardsYou don't.
All app development requires a Mac. -
How can I create my own shortcut to an app
How do I create my own shortcut to an app on my Mac Pro
Here are some more keyboard short cuts you may find useful including a different way of creating an Alias.
Use whichever you find the easiest.
http://support.apple.com/kb/PH10563 -
How do I set up a secured WI-FI account using Airport Extreme
How do I set up a secured WI-FI account using Airport Extreme
Read the user manual that came w/it!
-
How can I create a VPN network between my offices?
I want to create a conection between my two offices so that they can work better towether.
I downloaded the OSX Server v2.2 but I haven't been able to create the connection. I have read the help information in the app, but I don't understand what I'm doing wrong.
here is what I did:
I created a VPN Connection in Network preferences, then i oppened the server.app and activate the VPN service.
I fill all the fields, then in the other office i created the VPN Connecion in network preferences and filled out with the information of the other network, but it wasnt able to canect. I might not have all that is needed, here is what I have:
IMac mid 2010 with OS X server v2.2, this one will be the server host.
mac mini new, this one will be the client.
broadband Internet conection in both of my offices.
I would really apreciate if someone could point me to the right direction.
Is there a manual that explains how to do thisconnection?On the gateway to the remote network, for L2TP over IPSec you need to forward UDP ports 500, 1701, and 4500 to the endpoint.
You also need either a static external IP address or a domain name for the gateway. Internally, the enpoint needs a static address. -
How can I create a guest network on an airport extreme that connects wirelessly with a Timecapsule
I have a Timecapsule in one place of our house, that is connected to Internet. I need to extend the range of my network: 1. my private network needs to get to a remote location to make connection with speakers (Itunes). for this I need to first extend the range of my private network, because the speakers are too far away from the TC. 2. I need to set up a guest network, but at quite some distance from my TC, in an other part of the house, too far away from the TC (so a guest network on the TC won't do).
For this, upon advice from an apple store, I bought an airport extreme, which I have placed on a location where it can connect to the TC, to extend the private network. On the location of the speakers, I have an aiport express (connecting to the extreme), to play music from Itunes. The setup at this moment is: TC makes connection to internet, and broadcasts a private network. Extreme connects to this private network, and broadcasts it further to the Airport express, that captures it and plays the music. I would now like to create a guest network on the Airport Extreme, while this Extreme keeps on connecting to the private network of the TC and keeps on broadcasting it to the Express. Is this possible? How can I do this? Thanks for the help !I would now like to create a guest network on the Airport Extreme, while this Extreme keeps on connecting to the private network of the TC and keeps on broadcasting it to the Express. Is this possible?
Unfortunately, the "main" router...your TC in this case....is the only device that can create a Guest Network, assuming that the TC is connected to a simple modem.
Unfortunately again, the Guest Network cannot be extended. Your only real option here is to create a Guest Network on the TC and hope that it will have sufficient coverage for your needs. -
How can I create my own tag name while creating a partition table.
I have X4500 running Solaris 10. I have formatted a disk and created partition table as given below.
Specify disk (enter its number): 0
selecting c0t0d0
[disk formatted]
/dev/dsk/c0t0d0s0 is part of active ZFS pool zpool1. Please see zpool(1M).
FORMAT MENU:
disk - select a disk
type - select (define) a disk type
partition - select (define) a partition table
current - describe the current disk
format - format and analyze the disk
fdisk - run the fdisk program
repair - repair a defective sector
label - write label to the disk
analyze - surface analysis
defect - defect list management
backup - search for backup labels
verify - read and display labels
inquiry - show vendor, product and revision
volname - set 8-character volume name
!<cmd> - execute <cmd>, then return
quit
format> partition
PARTITION MENU:
0 - change `0' partition
1 - change `1' partition
2 - change `2' partition
3 - change `3' partition
4 - change `4' partition
5 - change `5' partition
6 - change `6' partition
select - select a predefined table
modify - modify a predefined partition table
name - name the current table
print - display the current table
label - write partition map and label to the disk
!<cmd> - execute <cmd>, then return
quit
partition> print
Current partition table (original):
Total disk sectors available: 1953508749 + 16384 (reserved sectors)
Part Tag Flag First Sector Size Last Sector
0 usr wm 34 4.00GB 8388641
1 usr wm 8388642 2.00GB 12582945
2 usr wm 12582946 200.00GB 432013345
3 usr wm 432013346 175.00GB 799014945
4 usr wm 1166180386 375.43GB 1953508748
5 usr wm 799014946 175.00GB 1166016545
6 usr wm 1166016546 80.00MB 1166180385
8 reserved wm 1953508749 8.00MB 1953525132
partition>
I am unable to specify my own tag name. How can I change the tag name to one of my interest.
I need to create 3 partitions as told below
partitions:
/earth
/mars
/work
/earth and /work should be roughly equal in size, /mars should be twice the size of the others, if that is possible. If not 3 partitions of equal size will do.
Please, help me .
Thank you.Exactly 1TB? Slightly under/slightly over?
Traditional Solaris disk labels are in VTOC format, but this format cannot describe disks larger than 1TB. So EFI labels must be used on disks larger than 1TB. Setup is slightly different.
Are these physical disks or LUNs from a SAN array? If they are array LUNS, it is often the case that they don't have a Sun label of any type. So...
#1 Apply a Solaris label
If the LUNS don't have a label (when selected in 'format', it gives a warning that no label is present and offers to apply a label immediately). When run non-interactively, format assumes "yes" for any questions. So all you'd have to do is select every disk to have it apply labels to any unlabled disk. Run 'format' once and find the highest number (maybe it's 50 for you). Create a text file that looks like this:
disk 1
disk 2
disk 3
disk 50Then feed that to format like this:
# format -f /tmp/disklist or whatever you've named the file.
#2 Apply the partition layout to all disks you want.
You asked if you should do the same procedure, but I don't see that you've actually done anything above other than print out the existing layout. Take one of your 48 drives and partition it the way you want manually (set the slices to the sizes that you want). Then you can copy the layout of that disk to others. You only want to do this between disks/LUNs of the same size. As an example, if you've explicitly partitioned c1t0d0 and you want to apply this to c1t1d0, do this:
# prtvtoc /dev/rdsk/c1t0d0s2 | fmthard -s - /dev/rdsk/c1t1d0s2Repeat for all of your other disks.
Darren -
UWL Help - How can i create my own task within the Enterprise Portal
Dear all,
I am currently working with UWL .
I have tried the customization and those stuffs associated with UWL , and it is working properly.
My current issue is , how can create my own task within the Portal ( not using Ad Hoc Workflow , which is present in Portal) ?.
If i can create my own task within portal by API or using another method , then How can i add that task link within the drop down box that is present in the Collaboration launch pad and Mytask Workset.?
Is there any API regarding UWL (which is useful for creation of custom tasks in Portal using Developer Studio by means of Portal Application Creation) ?
How can i add that custom task in the drop down ?.
I have tried the customization of existing UWL.
I shall be grateful to those who can help me to solve this issue with links regarding the solution of my problem's.
with regards
Kishor GopinathanHi Kishore,
I am trying to do the same thing. When i am creating Collaboration Task, it has standard templates in the dropdown like "Single Step" and "Multi-Step" etc., If i want to create my own Custom Task Template and display in that dropdown, how can i do that? Your help is really appreciated.
Thanks
Vijay -
How can I create my own document type
Hello
I want to know if we can create our own document types. With
coloring methods...
Beacause I want to have a coloring methode for my templates,
whose I edit them a lot of with dreamweaver. And it will be simply
if they can have theirs colors.
Sorry for my bad english, but I'm French... ;)
Thank for all1. in factory sales we are using T.code J1IIN. that time it fetch which type of Billing docu;ment. and how we can see that document. where it isconfigured
You cannot view the Billing type while creating the excise invoice.In SPRO,Tax on Goods Movement-->India >Business Transactions> Outgoing Excise Invoices -->Assign Billing Type to Delivery Types here you maintain the Delievry and Billing types with which you cancreate Excise Invoices.
2.Is there any copy control system between commercial Invoice to Excise invoice?
There is no copy control and the above step controls the relation between the billing and excise invoice.
3.How I can create my own Excise Invoice Document type.
You cannot create your own Excise Invoice Document type but you can create a Sub Transaction type and assign it while creating Excise Invoice to differentiate and pass the values to a different GL.
Maybe you are looking for
-
Download Webdynpro ABAP application(component) on desktop
Hi All, How do I download Webdynpro ABAP application(component) on desktop(hard drive) from SAP system? I couldn't find a feature in SAP that I could use to achieve this functionality. Also after downloading the Webdynpro ABAP application(component)
-
Alias account not receiving emails question
I setup an alias account under my outlook.com account. The alias account is a btinternet.com account. I sent an email to the btinternet.com account and expected that email would appear in the outlook.com inbox. Is there a "forwarding" step missing?
-
Paycheck Inquiry Service "Show Overview"
I am amending some of the standard portal content to remove some unecessary steps etc. I was wondering whether there was a simple way to maximise the overview link in the paycheck inquiry iview by default? ie so that the user immediately sees the o
-
How do I stop those effects in the video screen?
How do I stop those effects in the video screen? cube spins, pictures popping up, etc. I've looked in all the menus and in iChat Help, but I can't locate the off button. thanks, Richard G5 dual 2 gig Mac OS X (10.4.6)
-
RUL-01014 (Root Cause: javac: invalid flag)
Hello, I am trying to create XML fact but I am getting the error bellow. Can someone help? Cannot perform operation. 'RUL-01014: Unable to add XML schema path D:\My Documents\download\Application1\Project1\event.xsd into data model. Please see the ba