How can I create new user in such that its entries are stored both in profile server and ldap?

Portal only creates a user profile locally within its native ldap server. Two ways you can approach this is to either write a custom auth module that creates a user in the ldap server at the same time or handle it through replication.

Similar Messages

Can't create new users after GroupWise is moved from NetWare to Linux

Hi,
I moved GroupWise (Version 6.5 SP 6, single domain and single office)
from NetWare 6.5 server to SUSE Linux Enterprise server 9. It seems the
GroupWise server is running oaky. Existing users are able to connect
their mail box and send and receive messages. But I can't create new
users on the GroupWise server.
I used ConsoleOne installed on the Linux server to create new GroupWise
users. It seemed that I was able to do it. The new users appear on the
NDS and the GroupWise File IDs were assigned for these users. And I was
able to add these new users to distribution lists. But the users DB
files (userXXX.db) were not created under /grpwise/po/ofuser on the Linux
server and they cannot connect to the server. Old users cannot find them
in Novell GroupWise Address book.
Does anyone how to fix the problem?
Thanks in advance!
Jinkang

Hi,
[email protected] wrote:
>
> Hi,
>
> I moved GroupWise (Version 6.5 SP 6, single domain and single office)
> from NetWare 6.5 server to SUSE Linux Enterprise server 9. It seems the
> GroupWise server is running oaky. Existing users are able to connect
> their mail box and send and receive messages. But I can't create new
> users on the GroupWise server.
>
> I used ConsoleOne installed on the Linux server to create new GroupWise
> users. It seemed that I was able to do it. The new users appear on the
> NDS and the GroupWise File IDs were assigned for these users. And I was
> able to add these new users to distribution lists. But the users DB
> files (userXXX.db) were not created under /grpwise/po/ofuser on the Linux
> server and they cannot connect to the server. Old users cannot find them
> in Novell GroupWise Address book.
>
> Does anyone how to fix the problem?
This clearly sounds like your domain (which is the part of groupwise
which you admin against) doesn't/can't talk to the postoffice, so the
change you made (to the domain) does never get to the PO (which is where
the addressbook of your other users come from, and is what is
responsible for creating the user DB). This seems very likely to be
caused by your move not being done properly, and old information (either
path or IP address) for the PO still being in the domain and/or domain
database.
So how's the domain linked to the PO?
CU,
Massimo Rosen
Novell Product Support Forum Sysop
No emails please!
http://www.cfc-it.de

HT2534 My friend created me an itunes store account with his credit card , his credit card is about to expire and they are asking me to re-enter the credit card and security card number .... I don't have these numbers ... How can i create new itunes accou

My friend created me an itunes store account with his credit card , his credit card is about to expire and they are asking me to re-enter the credit card and security card number .... I don't have these numbers ... How can i create new itunes account without credit card?????

Why do you need to create a new account?
Just change the payment method.
http://support.apple.com/kb/ht1918

When i bought this iMac i failed to register correctly and as i am trying to install a printer i need to do this when i am logging on. How can i create new password

When i bought this iMac i failed to register correctly and as i am trying to install a printer i need to do this when i am logging on. How can i create new password

See
http://osxdaily.com/2011/08/24/reset-mac-os-x-10-7-lion-password/ and
http://osxdaily.com/2011/09/19/change-password-mac-os-x-10-7-lion-without-knowin g-current-password/
which also apply to Mtn Lion and Macericks.

HT201240 I forget my password and hint . How can I create new password ?

I forget my password and hint in MacBook Air 11-inch mid 2012 . How can I create new password .

Reset Password
OS X 10.7 Lion /10.8 MountainLion
Follow the instructions in the first and the third boxes.
http://pondini.org/OSX/Password.html
Note
Keychain
http://support.apple.com/kb/PH10623
Best.

HT2534 how can i creat new apple id

how can i creat new apple ID for free plz helpe me out

All Apple IDs are free.
Frequently asked questions about Apple ID

I want to sort all my bookmarks alphabetically but can't. You only let me drop a bookmark into an already-existing folder. And if that is the only way, how can I create new folders?

Question
I want to sort all my bookmarks alphabetically but can't. You only let me drop a bookmark into an already-existing folder. And if that is the only way, how can I create new folders so that I can try to create meaningful folders?

With the iPod connected to the computer go to the Music pane for the iPod in iTunes and check the box that says sync only checked songs. The check the songs you want synced and click on Sync. For more info see:
iTunes: Syncing media content to iOS devices and iPod

I want to give away or sell a 6500/250 running 7.6.1. How can the hard disk be erased so that the data are gone, not recoverable? thanks, LifeisRich

I want to give away or sell a 6500/250 running 7.6.1. How can the hard disk be erased so that the data are gone, not recoverable? thanks, LifeisRich

I'd recommend that you check for Mac User Group(s) in Orange County. That's where you'd likely find a diehard Mac fanatic who might want to add your 6500 to his/her collection. Even if you got nothing for it, it would be better than e-cycling it. I upgraded my 6500/275 with what was a "large" hard drive at the time (15 GBs), maxed the memory at 128 MBs, installed the 512K L2 cache card, a better ATI Rage Pro PCI graphics card, a USB PCI card, and an internal 56K modem. With it running OS 9.1, it did all of the pre-OS X stuff I needed it to do. As I previously mentioned, it's a nice-sounding MP3 player. Internet Explorer 5.1.7 (the final release from 2001) kept it useful for surfing the web up until 2005, when it became too outdated/incompatible with many web sites. Unfortunately, the demands of the internet and the need for a modern browser, as well as faster processing to digest it all, are what retired many older Macs from active duty. So my (2) 6500s and (3) 6400s (same tower design) sit in storage. There is one concern that I'll pass along: The motherboard has a 4.5-volt alkaline battery, that's a small, black plastic cube, secured in place by velcro. If your 6500 has been disconnected from electricity for a long time, the battery will undoubtedly be dead. Unlike the many Apple computers that used a small ½AA lithium battery (that I've never seen leak when completely dead), the 6500's battery can and usually does start leaking. Because the motherboard sits vertically oriented on its side edge when installed, the leaking battery will drip alkaline solution down the board, corroding any components in it path. I've seen motherboards ruined from this. If you're going to give it away or sell it, you might want to pull the motherboard (remove the two machine screws on the rear I/O panel, next to the pull tabs). Slide out the board and unplug the battery's small connector (has red & black wires), then lift up on the battery, while holding down the "toothed" velcro mount with something non-conductive, like a popsicle stick. Once it's free, dispose of the battery. If you're interested, a replacement can be purchased for about $5-$7 from battery specialty retailers - it's a Rayovac 870 or 871. Even if you don't replace it, removing one that will eventually leak is a good idea, (hopefully) before any damage is done.

How can i unlock my granddaughter's iphone that one of her friends changed the password on and locked it? the phone is saying connect to itunes.

how can i unlock my granddaughter's iphone that one of her friends changed the password on and locked it? the phone is saying connect to itunes.

If disabled because of a passcode, and you have not synced AFTER setting the passcode, you will have to force the phone into recovery mode & restore it as a new device. All data on your phone will be erased:
Turn your phone off. Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new. In your case, setup as "new" will be your ONLY option.

How can I change fullscreen background color, so that it is the same when viewing on mac and iPad? I want this to be able to use MathType in widget text.

How can I change fullscreen background color, so that it is the same when viewing on mac and iPad? I want this to be able to use MathType in widget text.
As an example, html widget has white background on iPad, and black on mac. The same goes for interactive widget.
The MathType text inserted is inserted as a image, and will have the same color when in fullscreen as when not. So I need the textcolor to be the same in both views. Anyone know how to fix this?

We're still not communicating. This is why I wanted an example .iba.
Here's a re-creation of my own, going off what you described. You said "all html widgets and all gallery widgets" have this problem. So I inserted a blank HTML widget and a blank Gallery widget, and typed into both. Inserted a MathType equation into both. I don't see any difference when I preview it on my Mac compared to the preview on the iPad. I want to help, but I can't help if I can't duplicate the issue.
I've attached the screen shots and the .iba file [link to .iba file].
Feel free to email me directly at bobm at dessci dot com. If you're uncomfortable giving some information here, tell me anything you want in email. I work for the "MathType company", Design Science.

How can i open a downloaded mp4 file that is zipped? Witch will not open. And, Convert that mp4 to play on my iMac with Maverick osx ? I there an app or apps i need to buy ?

how can i open a downloaded mp4 file that is zipped? Witch will not open. And, Convert that mp4 to play on my iMac with Maverick osx ? I there an app or apps i need to buy ?

You should be able to open the zipped file by double clicking on it.
http://www.videolan.org/vlc/index.html
This link is for a VLC Player it can play just about everything.
Cheers
Don

How to to create new user in Azure AD by using C# programming manually

Hi
I am using MVC 5 with Azure AD.
I want to create new user in Azure AD by using C# programming manually, I don't want to configure it.
Suppose I have an application where We have an option to create new user, so how we can write program for it.
Thanks in advance!!

Hello,
Microsoft Azure forums are over here:
https://social.msdn.microsoft.com/forums/azure/en-US/home
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Can't create new user account....

Hi- I am trying to create a new user account so that I can see if some of the issues I am having with my G4 Mac also are issues under a different account. I have (several times) created a new account and assigned a password and also tried having no password. Either logging out or using Fast User Switching, I click on the new user icon and either type in the password (I know I have it correct since it's my default password) or not type it in if I have no password set, and click on login. That's when I get the shaking window. No matter what I do, I can't login!! I am at a loss of what to do or what could be causing this. Any help will make me a happy Mac user again! Judy
PS- After I had this problem surface, I ran Monoligual and got rid of lots of language support and I also ran Font Nuke to clean out some font caches.... but these were run after I had problems setting up a new user account. I was having issues with the new upgrade for my genealogy program, Reunion (still having issues actually-they can't figure out what's causing the problem) and I removed some "things" from Login Items. Can't tell you what they were but I have some there still. I ran Disk Warrior and iDefrag also recently. Also have repaired permissions. The other issue I had (yesterday anyway-haven't used it much today yet) is that Safari was crashing when I was accessing my public library's online catalog............. I don't know if any of these are related to my inability to create a new user account or not but thought I'd throw that into the mix.

You say a dialog comes up for you to enter a password when you don't have a password while using Fast User Switching. That should not happen.
If you set up an account without setting the password, Fast User Switching won't bring up the password dialog for that account. Instead, it will instantly switch to that account when you choose it.
Make sure there is nothing in the password field when you set up the account, or change the password and don't type anything in for either the new or verify fields. It'll ask you to confirm that you don't want a password and "Cancel" will be the default button. Choose the "Ok" button instead.
That should do it. If not, then I have no idea.

Can't create new users in Administration Services Console

Hi,
I am following directions in the Essbase DBA guide for creating new users, as it says you must create a partition user to work with Samppart and Sampeast applications. It tells me to log on to Administration Services Console, go to the Administration Server, and right-click on users to create a new user. However, when I right-click, the option to Create New User is light grey and not clickable, neither is the option to refresh users. Can anyone tell me why I can't create a new user? I am logged in with the username: admin password: password that I set during configuration and that should be the Administrative account.

Hi,
What version are you using? If it is 9 then you need to create the user in shared services. I just checked and the option to create a user is greyed out for me too and I am an admin.
It sounds like you haven't externalised the users which is why the option to do a refresh is not there.
Thanks,
Nathan

How can I create new carriforwarede and Brodforwarded wage types

Hi Gurus
We had one wage as special compensation.that has been done for to update in IT0014.
Now new requirement is came that special compesation was type they would like to update in IT0008. I have all the necessary configuration. its working fine. now client wants to create Brodfowarded and Carryforwarded wage types for this wage type.
Pls let me know how can I create these.?
And where should I have to map this?
Is it scheema level job or not?
pls asap.
Regards
suresh

Hi Navya
Thanks for your replay
Can you pls some elobarate this. becasue of I have not all done schema changes till now. here we have been using IN00 schema.
Can give some brief explanatation how can I do this. I have been wiating for you valuable replay. pls
Regards
Suresh

How can I create new user in such that its entries are stored both in profile server and ldap?

Similar Messages

Maybe you are looking for