How can i create time charateristic queries in BEx

I don't know how iam allowed to create a time characteristic query in BEx
Iam also looking for a solution to change query settings during the runtime

hey thanks for the answer
i changed the query design into an other order and now it looks better. But i still have a problem.
I just want to select a intervall from a year.
For instance its may 2007 now so i want to show all values for may 2007 to may 2008
But i am only allowed to filtering for each info object so my filters for the year are
2007, 2008 and for month may, juni, july......may
The result is i get all values for 2007 and 2008 i need a refrence from month for each year.

Similar Messages

I am trying to update my time machine backup on time capsule, but time machine keeps trying to create an entirely new backup (evidenced by the 200GB backup size). How can I get time machine to modify my old backup rather than create a new one?

I am trying to update my time machine backup on time capsule, but time machine keeps trying to create an entirely new backup (evidenced by the 200GB backup size). How can I get time machine to modify my old backup rather than create a new one?

It must have found the old backup corrupt.. so you will more than likely have little choice. You can archive off the old backup if it is still useful.
You can also verify it. See A5 http://pondini.org/TM/Troubleshooting.html
He also has some info on this problem. eg C13.

How can I create a Face Time account. I have an Apple ID and password. When I Google how to create an account all I get is what I need for the system

I have a 13" MacPro. How can I create a Face Time account. I have an Apple ID and password. When I Google how to create an account all I get is what I need for the system

You don't need to create an account. Your use your Apple ID to log into Facetime.
If you haven't already you will need to download the Facetime App from the Mac App Store.
https://itunes.apple.com/us/app/facetime/id414307850?mt=12&ls=1
FaceTime for Mac: Troubleshooting FaceTime - Apple Support

How can I make Time Machine use the ethernet cable to Time Capsule instead of the wireless connection? Wireless is too slow; has been taking 40 hours to create an initial 142 GB backup.

How can I make Time Machine use the ethernet cable to Time Capsule instead of the wireless connection? Wireless is too slow; has been taking 40 hours to create an initial 142 GB backup.

Plug in ethernet .. in the computer.. turn off wireless.

How can I create an EntityStore for a Database? Advice on DB strategy?

Hello All,
How can I create an com.sleepycat.persist.EntityStore for a com.sleepycat.db.Database? Advice on DB strategy?
I'm looking to create an application prototype that creates a database dynamically and can delete it programatically. Is openDatabase/removeDatabase what I'd want to use for that?
So far, the Direct Persistence Layer is an amazing piece of technology and has the potential to make my team's application faster than we every though possible, so kudos to the author.
I've built a high-security application using the DPL and a single database for hundreds millions of users. I'd like to attempt to create a database for each user for security and manageability purposes. Our mission statement doesn't allow us to execute queries for sensitive data across more than one user account at a time, so I don't get any benefit from having every user's objects in a single database. I'm investigating if giving each user their own database will speed up insert times and SecondaryIndex queries. It'll certainly be more secure as each database will be encrypted with a unique password.
My design is that I have an app with dozens of com.sleepycat.persist.model.Entity beans which I persist and query on their Primary and secondary indexes. I've been accessing things through an EntityStore as illustrated in the Getting Started Guide. Can I access a database created with openDatabase through an EntityStore and com.sleepycat.persist.PrimaryIndex?
Thanks in Advance,
Steven
Harvard Childrens Hospital Informatics Program

I closed this as I found another way to solve my issue.
Thanks,
Steven

How can I create JScrollPane in my swing application with scroll bars movin

Hi,
How can we create scrollpanes moving with scrollbars.I tried many times with custom layout.but it does not work if i set custom layout.I hope that I will get my problem solved.
Thanks and Regards,
Rameh RK

This means it is not possible to create a pure unicode file without the byte order mark?
You wouldn't happen to know how a file with byte order mark should read on a Linux system?
Or if this possible or not?
Regards
Christian

How can I create a new ring tone for my iPhone 4?

How can I create a new ring tone for my iPhone 4? I followed the Garage Band process and ended up with the ring tone I want as a AAC audio file. It got stored in my iTunes a a song rather than a ring tone. How do I make it a ring tone vs. a song? I tried dragging it t the Ring Tone category at the bottom of the ITunes list, but it won't alloow me to move it?

There's also an easy to use Applescript over at Doug's Applescripts for iTunes. It automates the whole thing. All you do is set the start and stop time on a file in iTuens and run the script. It will do everything else.
Make Ringable v1.1
http://dougscripts.com/475

How can I create multiple versions of a video within the same project?

OK...this is a probably a very basic question but I'm not sure how to word it clearly.
How can I create multiple versions of a video within the same project? What I mean is that I have a bout 50 minutes of video and I want to make two DVDs using different clips from this original 50 minutes of footage. It would be a real pain to have to re-import the video AGAIN for the second DVD. I suppose I could drop anything I don't want to burn to DVD back into the clips pane but that would wipe out all my transitions wouldn't it? I want to save each project in their “raw” form so I can burn additional DVDs later otherwise I would just do them one at a time and not care about one of them being destroyed.
Wow...that was a mess. Does anyone understand what the heck I’m asking? I hope so.

How can I create multiple versions of a video within the same project?
You can't. You make separate projects using the same or different clips, segments, transitions, titles, etc. You can even duplicate the first project and then modify/make the desired changes in the duplicated project. Each project can then be burned as a different DVD or as different titles on the same DVD if there is enough room.

How can I create a new TC backup with ethernet, so I don't have to wait two days for a new wireless backup?

How can I create a new TC backup with ethernet, so I don't have to wait two days for a new wireless backup?
Several times in the last year, I've gotten a message that Time Machine needs to completely redo my backup. Using the wireless connection, this takes almost two days. Is there a way to do the backup with ethernet and then switch back to wireless? Thanks.

May I know what is needed to make sure the MacBook is able to see Time Capsule on ethernet?
Connect an Ethernet cable from one of the LAN <-> ports on the 2Wire gateway to the WAN port (circle of dots icon) on the Time Capsule.
If AirPort Utility cannot "see" the Time Capsule now, you will need to perform a "hard reset" by holding in the reset button for 7-8 seconds or so and then reconfigure the Time Capsule. You can use the same Time Capsule name and password, etc. as before.
Configure the Time Capsule to "Create a wireless network" and select the Bridge Mode option when it appears during the setup using AirPort Utility.
Once the Time Capsule is configured, restart the entire network again. Power down everything, start the 2Wire first and then start each other device after that one at a time about a minute apart.
Now you can connect your Mac directly to one of the LAN <-> ports on the Time Capsule for the backup using another Ethernet cable. In general, about 20-25 GB per hour will transfer.
The Time Capsule will broadcast a much faster wireless network than the 2Wire can provide, so you might want to leave the setup "as is" for awhile after the first backup is complete. If you decide to use the Time Capsule as your main wireless access point, you would want to turn the wireless off on the 2Wire since two wireless networks in close proximity can create interference problems.
Or, if you want to use the wireless on the 2Wire, you could turn off the wireless on the Time Capsule. Then backups will occur over the 2Wire wireless, or over Ethernet.
I don't really recommend the "Join a wireless network" setting on the Time Capsule for most users, but you could go back to that setup as well if you want after the first backup is complete.

How can i create a new transport request?

Dear Experts,
Some colleagues have to modify a master record, but save time, failing to produce a request no., then, how can i create a new transport request?
Wilson

Hi,
Please let us know about the issue when you create the new Transport request .
In which system you are creating the request . Hope its in Development .
If so , check the entries are enabled in SCC4 > Changes without automatic recording
Changes to repository objects and cross client customizing allowed .
Protection level 0
If these entries are enabled, you must be able to create Transport requests.
Please check and update .
Regards,
Nibu

How can I create a new Numbers Document through AppleScript?

How can I create a new Numbers Document through AppleScript?
I try this:
tell application "Numbers"
make new document with properties {template name:"blank"}
end tell
But don't work.
Where can I find documentation about it?
Thanks

If you try to invent your own syntax, you are starting on very wrong basis.
The required syntax is defined by the Numbers AppleScript's dictionary.
This one doesn't know what is a template.
This is why, in the link posted by badunit, I use an other scheme to create a new document.
I know that it's awful but it's the only one available at this time.
Yvan KOENIG (VALLAURIS, France) samedi 4 juin 2011 11:25:25
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.7
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

How can i create a new and tableless database using database configuration

How can i create a new and tableless database using database configuration

How can i create a new and tableless database using database configuration
Just don't install the sample schemas. See the installation guide
http://docs.oracle.com/cd/E11882_01/server.112/e10831/installation.htm
Using the Database Configuration Assistant
When you install Oracle Database with the Oracle Universal Installer, the sample schemas are installed by default if you select the Basic Installation option. Selecting the sample schemas option installs all five schemas (HR, OE, PM, IX, and SH) in the database. If you choose not to install the sample schemas at that time, you can add them later by following the instructions in section "Manually Installing Sample Schemas".
Choose a custom install and don't install the sample schemas.
All other schems/tables installed are REQUIRED by Oracle

How can I create a simple chat function in a mobile app for iOS and Android

I am wondering how can I create a chat function in my mobile app creating in AIR and Flex. The chat should be similar to the one in WhatsApp.
Do you know some possible solutions?
Thank you in advance!

To enable chat messages, you need a server. The kind of server depends on the application. Do you want to create a chat like application like WhatsApp, where the server pushes messages without an active connection? Or do you have some sort of online game, where chat messages can only be transferred when the client is connected already?
I have an online game where clients are connected to a Java server at all time. From there it is pretty straight forward:
2 textfields:
- 1 line textfield for input messages
- multi-line textfield for chat history. Make sure the textfields autoscrolls to the bottom when the content changes
on enter or button push, send a socket message to the server.
the server broadcasts all messages to all clients that are subscribers of the chat group.

How can I create accurate decimal dimensions when creating a new document or using the art board in Illustrator CS6? When I type in a number with a decimal, it automatically rounds the number up.

How can I create accurate decimal dimensions when creating a new document or using the art board in Illustrator CS6? When I type in a number with a decimal, it automatically rounds the number up.

For my part you are welcome, sdowers.
Unfortunately, the uncertainty arising from the rounding has been up several times here in this forum.
I just came to remember a warning that needs to be given:
The rounding of the representation of a numerical value may be harmless in itself, but if you use it for any operation that changes the value, such as multiplication or whatever, things will go wrong because the operation will be made on the basis of the rounded value instead of the true value. So, as in your first case in post #2, 39.625 rounded to 39.63 will become 79.26 instead of 79.25.

How can I create a solution with Livecycle

I work for a high school and we have about 12 pdfs that we need parents to read/scroll through, then 10 (different) pages that we want them to print, complete and return to the school. Finally, we want them to see a "Thank you, you have done all you have to do" type screen. We want to make it as user friendly as possible so I was thinking...
Reading pages, 1 at a time with next at bottom.
Click next and it takes them on. When they get to printing pages 1 print button prints all pages we need them to print. Click next, and it takes them to optional print pages.
Click next and it says, thank you.
How can I make this happen if I already have all the pdfs?
Help please.
John Dent
[email protected]

Thank you soo much. A few questions?
They weren't created in designer but could I just import all of them?
How do "build the structure" for the naviagtion?
Where/how do you add the script.
Thanks again,
John Dent
Date: Fri, 30 Jul 2010 07:01:08 -0600
From: [email protected]
To: [email protected]
Subject: How can I create a solution with Livecycle
I assume that all of these PDFs were created in Designer. If so you can add any buttons that you want to appear on every page (Next, Previous) onto the Master page then there is script you can add to the buttons to actual move the pages (xfa.host.pageDown() and xfa.host.pageUp()). The Prin button can be added to the specific page and you can pass the page numbers that you want to print as a parameter to the print command. Lastly when you get to the last page and the click Complete you can display a messageBox with your Thank you message.
Hope that helps
Paul
>

How can i create time charateristic queries in BEx

Similar Messages

Maybe you are looking for