How can I create variant of control query?

Dear Expert,
I am using BEx Broadcaster to bradcast query as a report.
In tab Filter Navigation, I enter the control query, but the variant always gives me "(No Selection Possible)".
How can I create variant of control query?
I try to create variant via variable entry page when I excute my query.
The variable show in table "RSRPARAMETRIZA" but not show in BEx Braodcaster.
Thank you,
Zilla

Hello,
Please run this control query on the portal and then save variant you require. If you want this variant to be available
to all users make sure that the user specific flag is unchecked while saving the variant.
Regards,
Michael

Similar Messages

  • How can i create a custom control, indicator

    This is FredFred,
    How can i create a custom control switch with 3 or more options,
    OFF
    ON
    STANDBY
    Other than rocker, slide, or toggle switch, are there other switches that we can use, hence, the question of creating a custom switch.
    Also, is there a way to create an indicator with two options. Enclosed is a jpeg with an example of what i need
    Thanks in Advance
    Attachments:
    sample switches_displays.bmp ‏720 KB

    Hello.
    Boolean controls can only have 2 possible values, true or false, and there is no way to add more values to them.
    If you need more values, then you must use a numeric control (or a string, but I tend to like numerics better, although strings could be just as useful).
    There are several types of numeric controls you could use to provide 3 or more options. Attached is a VI which shows a ring, a knob, and a slide each with 3 possible values. In your code, you would then perform different actions depending on the numeric value of your control.
    Hope this helps,
    Alejandro
    Attachments:
    NumericsWith3Options.vi ‏14 KB

  • How can i create variant name

    How can i create the variant name against table KNa1.

    Hi,
    please check out the link below it will explain you have to create a variant.
    http://help.sap.com/saphelp_webas620/helpdata/en/c0/980389e58611d194cc00a0c94260a5/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/c0/980374e58611d194cc00a0c94260a5/content.htm
    ***********please reward points if the information is helpful to you***********

  • How can i create the exceptions in query

    Hi Firends,how can i create the exceptions for key figures and charectristics and how can can i assign the colours and when we will create the variables for exceptions..
    please let me know..
    Assign Points surely..
    regards

    Hi,
    Not sure i understnad your request 100%, but exceptions for key figures are created as explained in http://help.sap.com/saphelp_nw04/helpdata/en/68/253239bd1fa74ee10000000a114084/content.htm
    and
    http://help.sap.com/saphelp_nw04/helpdata/en/1a/615f64816311d38b170000e8284689/content.htm
    Assign points if useful,
    Xibi

  • How can I create a Ring Control of Ring Controls?

    I would like to create a ring control that contains a number elements each of which when selected will drop down another selection list. Is this possible?

    > I would like to create a ring control that contains a number elements
    > each of which when selected will drop down another selection list. Is
    > this possible?
    It isn't possible in a ring control, but it is trivial on the menubar.
    Look for info on the Menu Editor.
    Greg McKaskle

  • How can I create a manual control switch?

    Using LabVIEW 6i, I am creating an interface to control a set of valves.  Sometimes the valve control is automated, but manual control is also allowed by flipping a "manual control" switch.  When the controls are in "automate" mode, they can not be switched by the user.  The way I have done this is to create two sets of controls on top of one another: one is a "control", and the other is an "indicator".   When I switch between manual and automatic, I change the visibility of the controls to show either the 'control' or the 'indicator', respectively.  It seems that there should be a better way to do this.  Any ideas?

    Use your "manual control" switch to enable or disable the set of valve switches. This you do e.g. by creating a Property Node for each of your valve controls and select the property "Disabled". You can wire the states "Enabled", "Disabled" and "Disabled and Grayed Out" to all of the property nodes. (You cannot operate on disabled controls - which is exactly what you need.)
    This also removes the need to have the two sets of controls and indicators: The set of controls will do.
    Regards, Guenter

  • To create variants for Bex query

    Hi Guys,
    where and how do we create variants for Bex query.
    Thanks,
    Your help is appreciated.

    Hi Sheo,
    There are several threads about this, check here:
    /thread/297437 [original link is broken]
    Hope this helps...

  • How can I create a query with web service data control?

    I need to create a query with web service data control, in WSDL, it's query operation, there is a parameter message with the possible query criteria and a return message contains the results. I googled, but cannot find anything on the query with web service. I cannot find a "Named Criteria" in web service data control like normal data control. In Shay's blog, I saw the topics on update with web service data control. How can I create a query with web service data control? Thanks.

    Hi,
    This might help
    *054.     Search form using ADF WS Data Control and Complex input types*
    http://www.oracle.com/technetwork/developer-tools/adf/learnmore/index-101235.html

  • How can I create a query with tables in INFOSET?

    Dear Gurus,
    How can I create a query with tables in INFOSET?
    Just tables and fields INFOSET?
    Kind Regards,

    Hello
    Check following SCN Article for your understanding/reference:
    - [Using Infoset Query ,SAP Query and Quick Viewer|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/10eab7af-0e54-2c10-28a5-87b47adbe1a5]
    Regards
    JP

  • How can I Create a exe file were a tab control on it work`s

    I have a VI with many controls and indicators,these are spread on a tab control.This tab control works with out any problems but if i create a exe file then the tab control is fixed. How can I create a exe file so that the tab control on it work´s ?"
    Attachments:
    project7.1.jpg ‏129 KB

    Make the tab control a control and not an indicator. If you want to write
    to it you need to create a local variable.
    "Carlos-R." wrote in message
    news:[email protected]..
    I have a VI with many controls and indicators,these are spread on a
    tab control.This tab control works with out any problems but if i
    create a exe file then the tab control is fixed. How can I create a
    exe file so that the tab control on it work´s ?"

  • How can I create a exe file with a tab control on it that work´s ?

    I have a VI with many controls and indicators,these are spread on a tab control.This tab control works with out any problems but if i create a exe file then the tab control is fixed. How can I create a exe file so that the tab control on it work´s ?

    I have made a new Posting with the same question but this time I added a screenshot of the VI.
    Attachments:
    project7.1.jpg ‏129 KB

  • Oracle Forms - How can I create a Data Block with query

    Dear friends I have a question, I couldn't do this..
    I have a sql query, I want to show the datas of the query.. How can I do this. ?
    Data Block Wizard wants a table, view or stored procedure, but I have a query, how can I create a data block with my query.. I m waiting your helps..? Please...
    Semih

    Hi,
    You have two options
    1. create a view and base the block on the view
    2. create a block with a query Data Source Type of 'FROM clause query'
    Hope this helps
    Neil

  • How can I create a query

    Hi BWers,
    How can I create a query, when the Customer run the report today he should see this month data.when the customer run the report for previous month he should see previous months data.How can I do this without going for Select options.

    Hi,
    If your customer run this report when he input a day in previous month, they want the whole previous month total data, you can use Replacement Path variable to get the previous month. If your customer run this report when he input a day in previous month, they want the data from 1st day to input day in the month, you can use customer exit variable to calculate 1st day in the previous month.
    When the Customer run the report today he can see this month data, those two type variables can do.

  • How can i create datasource on apache server for ADF application?

    Hi All,
    i my use case i have created simple adf application using ADF BC and want to deploy on Apache server 6.x.
    So my question is that  how can i create Data Source i have goggling and find  two different way to do this.
    1. write following line of code on apache server conf/Context.xml file.
    <Resource name="jdbc/TestDB" auth="Container"
                  type="javax.sql.DataSource"
                   driverClassName="oracle.jdbc.OracleDriver"
                  url="jdbc:oracle:thin:@localhost:dst"
                  username="jagrandb" password="jagrantest" maxActive="20" maxIdle="10"
                  maxWait="-1"/>
    but when i have used this way i got following exception.
    org.apache.tomcat.dbcp.dbcp.PoolingDataSource$PoolGuardConnectionWrapper cannot be cast to oracle.jdbc.OracleConnection
    check link-
    https://forums.oracle.com/thread/2564233
    2. write following line of code apache conf/Server.xml file
    <GlobalNamingResources>
        <!-- Editable user database that can also be used by
             UserDatabaseRealm to authenticate users
        -->
        <Resource name="UserDatabase" auth="Container"
                  type="org.apache.catalina.UserDatabase"
                  description="User database that can be updated and saved"
                  factory="org.apache.catalina.users.MemoryUserDatabaseFactory"
                  pathname="conf/tomcat-users.xml" />
    <Resource name="jdbc/TestDB" auth="Container"
                  type="oracle.jdbc.pool.OracleDataSource"
                  description="User database that can be updated and saved"
                  driverClassName="oracle.jdbc.driver.OracleDriver"
                  factory="oracle.jdbc.pool.OracleDataSourceFactory"
                  url="jdbc:oracle:thin:@//172.31.43.207:1521:dst"
                  username="jagrandb" password="jagrantest" maxActive="20" maxIdle="10"
                  maxWait="-1"   />
      </GlobalNamingResources>
    and add this line in context.xml file inside <context> tag
    <ResourceLink global="jdbc/TestDB" name="jdbc/TestDB" type="oracle.jdbc.pool.OracleDataSource"/>
    but when i have run application i have got following error
    log-
    javax.servlet.jsp.JspException: Unable to get connection, DataSource invalid: "java.sql.SQLException: invalid arguments in call"
      at org.apache.taglibs.standard.tag.common.sql.QueryTagSupport.getConnection(QueryTagSupport.java:298)
      at org.apache.taglibs.standard.tag.common.sql.QueryTagSupport.doStartTag(QueryTagSupport.java:181)
      at org.apache.jsp.test_jsp._jspx_meth_sql_005fquery_005f0(test_jsp.java:110)
      at org.apache.jsp.test_jsp._jspService(test_jsp.java:63)
      at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
      at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
      at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:374)
      at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:342)
      at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:267)
      at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
      at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
      at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
      at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
      at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
      at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
      at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
      at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
      at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:286)
      at org.apache.coyote.http11.Http11AprProcessor.process(Http11AprProcessor.java:857)
      at org.apache.coyote.http11.Http11AprProtocol$Http11ConnectionHandler.process(Http11AprProtocol.java:565)
      at org.apache.tomcat.util.net.AprEndpoint$Worker.run(AprEndpoint.java:1509)
      at java.lang.Thread.run(Thread.java:662)
    Aug 2, 2013 5:17:21 PM org.apache.catalina.core.StandardWrapperValve invoke
    SEVERE: Servlet.service() for servlet jsp threw exception
    javax.servlet.jsp.JspException: Unable to get connection, DataSource invalid: "java.sql.SQLException: invalid arguments in call"
      at org.apache.taglibs.standard.tag.common.sql.QueryTagSupport.getConnection(QueryTagSupport.java:298)
      at org.apache.taglibs.standard.tag.common.sql.QueryTagSupport.doStartTag(QueryTagSupport.java:181)
      at org.apache.jsp.test_jsp._jspx_meth_sql_005fquery_005f0(test_jsp.java:110)
      at org.apache.jsp.test_jsp._jspService(test_jsp.java:63)
      at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
      at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
      at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:374)
      at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:342)
      at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:267)
      at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
      at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
      at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
      at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
      at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
      at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
      at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
      at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
      at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:286)
      at org.apache.coyote.http11.Http11AprProcessor.process(Http11AprProcessor.java:857)
      at org.apache.coyote.http11.Http11AprProtocol$Http11ConnectionHandler.process(Http11AprProtocol.java:565)
      at org.apache.tomcat.util.net.AprEndpoint$Worker.run(AprEndpoint.java:1509)
      at java.lang.Thread.run(Thread.java:662)
    so what is the solution how to create datasource on apche server which suitable for adf application?
    when i test data source using  following code used 1. way as i mentioned above  its running fine bt not for second.
    <%@ taglib uri="http://java.sun.com/jsp/jstl/sql" prefix="sql" %>
    <%@ taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c" %>
    <sql:query var="rs" dataSource="jdbc/TestDB">
    select empname from pay_emphdr where empcd='JK1306'
    </sql:query>
    <html>
      <head>
        <title>DB Test</title>
      </head>
      <body>
      <h2>Results</h2>
    <c:forEach var="row" items="${rs.rows}">
        Foo ${row.empname}<br/>
    </c:forEach>
      </body>
    </html>
    please help me. it is very urgent.
    thanks in Advance
    Manish

    Hi Lindalnci
    i have already tried  this tutorial and in my post i have defined first way to do using this procedure.
    in that case i have got following exception as i have mentioned above
    org.apache.tomcat.dbcp.dbcp.PoolingDataSource$PoolGuardConnectionWrapper cannot be cast to oracle.jdbc.OracleConnection

  • How can I create an EntityStore for a Database?  Advice on DB strategy?

    Hello All,
    How can I create an com.sleepycat.persist.EntityStore for a com.sleepycat.db.Database? Advice on DB strategy?
    I'm looking to create an application prototype that creates a database dynamically and can delete it programatically. Is openDatabase/removeDatabase what I'd want to use for that?
    So far, the Direct Persistence Layer is an amazing piece of technology and has the potential to make my team's application faster than we every though possible, so kudos to the author.
    I've built a high-security application using the DPL and a single database for hundreds millions of users. I'd like to attempt to create a database for each user for security and manageability purposes. Our mission statement doesn't allow us to execute queries for sensitive data across more than one user account at a time, so I don't get any benefit from having every user's objects in a single database. I'm investigating if giving each user their own database will speed up insert times and SecondaryIndex queries. It'll certainly be more secure as each database will be encrypted with a unique password.
    My design is that I have an app with dozens of com.sleepycat.persist.model.Entity beans which I persist and query on their Primary and secondary indexes. I've been accessing things through an EntityStore as illustrated in the Getting Started Guide. Can I access a database created with openDatabase through an EntityStore and com.sleepycat.persist.PrimaryIndex?
    Thanks in Advance,
    Steven
    Harvard Childrens Hospital Informatics Program

    I closed this as I found another way to solve my issue.
    Thanks,
    Steven

Maybe you are looking for