How can i debug with field(rbkpv-xblnr) wise in MIRO

Hi Experts,
i would like to debug field wise, and how can i assign the value in the middle of the debugging for the particular field. please give me the steps.
thanks in advance.
Hari

Hi Hari,
Use /h to start the debugging.
use F5 to go single step by step
double click any of the variable. Then you can change the values.
Regards
Arun

Similar Messages

How can I have two fields with the same name if it makes sense?

Hello, folks :)
I have a pretty hard time figuring out how I can have two text fields with the same binding name.
The whole problem is that when I need two fields with the same binding name they are still differnent coz they have the same name but differnt indices.
I should make a form filled at runtime by merging a pdf form file and an fdf file data file. And I have no choice to do it differently. And my form file needs some data like customerName, companyName twice in one form. But there's only one possible buinding name indexed zero.
How can I create a field with absolutely the same name or is it just impossible due to possible name conflicts? And is there a workaround to this problem? I just need one piece of data repeated in different places.
Thanks for your replies :)
P.S. if u think that the problem is not clear enough let me know. I'll supply you with more details. But the general process can not be changed.
One pdf should be mergred with an fdf with as the result of their merge a new filled and flattened form. I have no control over fdfs their are generated by Oracle and I can not fill the form using XML files coz this process should be integrated in a working application.

I just thought about a really ugly workaround with a server-side script adding values to fdf files but it's a bit of work and tests and personally i think it's a bad idea :-(

How can i debug my abap program?

hi. how can i debug my program?

Hi,
There are many ways to start debugger
     By clicking the Execute button and selecting the debugging mode.
     From the ABAP/4 editor, by executing a program choosing Program  Execute  Debugging from the menu.
     Setting breakpoint in the program
Components of ABAP/4 debugger
The debugger shows the program information using six different views.
     Fields: Displays the field contents.
     Table: Allows modifying the contents of internal table.
     Breakpoints: Displays list of Breakpoint in the Program.
     Watchpoints: Allows dealing with Watchpoints.
     Calls: System call status like Event, Form etc.,
     Overview: Presents the program structure, events, subroutines, and modules.
     Settings: Displays the calling sequence within a particular event, up to the current breakpoint.
All these options are shown in the following screen.
Arrow indicates the breakpoint of the program i.e., where user has stopped the program.
Breakpoints
A breakpoint is the signal, which is specified in the program, tells the system to stop the program execution and to start the debugger. Following types of breakpoint are available with ABAP/4:
     Static are set up with the BREAKPOINT keyword inside the program, which you can directly display with the ABAP/4 source code editor. To set the breakpoint in the program enters the keyboard BREAKPOINT.
     Dynamic this breakpoint is not visible in the code. Position the cursor over the source code line to have the breakpoint and then select utilities -  breakpoint -  set. You can delete them or display them from breakpoint list. Or you can execute the program in the ABAP/4 debugger i.e., in debugging mode.
     Watchpoints are field specific. The program is stopped when the field reaches the value specified in the watchpoint. Execute the program in debugging mode. Position the cursor over the needed field. Press the F button to get the view of field. Select the checkbox for the needed watchpoint. Click on the continue button.
     Keywords/events The program stops just before executing a specific event or keyword. To set breakpoint at particular event, from initial screen of debugger, select Breakpoint  Breakpoint at  at event/at keyword. Enter the name of the keyword or event. Click on OK.
Navigating through the breakpoint
Following buttons are used to navigate through the program and debugger.
     Single step: Executes a single program command.
     Execute: Similar to the single step, but when a program calls a subroutine, it executes the whole subroutine unlike single step.
     Continue: Executes the program until it is finished or until it finds next breakpoint.
     Return: Allows for executing the program instruction up to the end of a routine and stops in the line of code where the subroutine gives back control to the main program.
     Tables: Switches the debugger to the table view.
Displaying and modifying values
Every time the program is stopped within a debugger, you can display and modify the contents of table field and fields.
To display the fields, click on V and you can view the contents of system field, program field, ABAP/4 dictionary fields, and external program fields.
Displaying and modifying internal tables
When you click on the Table button from the initial ABAP/4 debugger screen, the system will display the table debugger view. Here you need to enter the name of the internal table to be displayed. You can modify or delete or add i.e., insert the internal table Contents. These changes are applicable only for the debugging and do not affect the structure of internal table in the program.
Reward.

How can we insert a field when it is null and not present in database?

I am working on a report in CR XI..i have strucked ata point where i am unable to find solution..my report has fields like Financial supply and physical supply..as a froup...but both are not displaying on all pages as there are no values to be displayed in them..even though how can i display both fields in all pages ..no matter what the figures are but i need these both fields to be displayed..plz help me out?

Â Â Â Regards
Â Â Â Sunil
I have tried ur formula but unable to get the solution...
as there are already the same fields with existing records..all i want is how to get the field where the values doesnt exist....i.e..fin supply and phy supply exists in one zone and doesnt have values in other zone...so huv to insist the physical field into the table?

How can I add a field to a Repeating Frame in the body of a 9i Report

How can I add a field to a Repeating Frame in the body of an Oracle 9i Report whose source is in a higher group?
I want to change an Oracle 9i report. The report has no header or trailer but only a body. The body has the parent frame fields & a repeating frame with four fields, A, B, C & D. They all seem to be in one group. I want to add another field E to the repeating frame whose source is from the 'header'.
I added the field & created a boiler plate & then added the new field, E to the original group A, B, C & D. In the Property Inspector for the field, I pointed the source to the source column in the main query. However, when I run the report, I receive the error "Invalid body size". Some notes on Metalink indicate that this could be due to margins being out of the printable area.
Moreover, after making the changes & after having unsuccessfully run the report, when I try to open the Page Layout for the report, I get no details.
Thanks,

Hi,
i also got same query can u pls tell me elaborately, if u can can u pls send some code.
Thanks & Regards
Jagadeeshwar.B

How can i transfer a field value in the main report to its sub-report?

How can i transfer a field value in the main report to its sub-report?Please eloberate with example if possible!Thanks... 

You can do a couple of things - one would be to pass the information using the data linking expert. Right click on the subreport, choose 'Change Subreport Links' and select the field(s) you are wanting to pass to the subreport. CRW will build parameters and a record selection formula for you in the subreport, and if that's what you want, then great. But you can also remove the selection formula from the subreport and work with the parameter fields in the subreport however you would like.Alternatively, you can look to passing Shared variables back and forth from the main and subreport. this link talks about the method to do this: http://diamond.businessobjects.com/node/251

How can I set the field ICt in component table of the Tasklist as "Input" ?

Hi experts,
How can I set the field ICt (BOM's Item Category (POSTP)) in component table of the Tasklist as "Input" Status (The system is in gray now).
I can define the different Category value by IB01 or IB02,then I can select them at the Tasklist's component table.But sometimes I need batch input such as LSMW,so pls kindly tell me how to setup it,thanks!
Yinjun

Hi,
BOM is created with some component and item category.
In task list when you go to component, in normal case one selects and copies BOM over there by clicking component selection button.
Once BOM is copied over there the BOM item category will get copied. As it is BOM item category in Task list it is greyed and it will get copied automatically from BOM.
You specify item category required by you in IB01 or IB02 and then use that BOM in task list. Go to componenet tab and click component selection button. Once BOM is copied over there the BOM item category will get copied

How can I mark a field entry as obligatory in UI

CRM 2007: UI
Hi,
How can I mark a field entry as obligatory in UI?
In SAP GUI all required entries are marked with a check mark.
Regards,
André

Hi, if you want to mark a field obligatory statically in UI go to the: enhanced component/enhanced view/configuration, you can copy the standard configuration and assign you're custom one to a role key. then you can change the atributes on view field atributes.
Best Regards,
Luí

How can I keep the field in the same page

How can I keep the field in master frame in the same page of the detail frame?
They are in the different pages sometimes?
Thank you.

I believe the OP has a question similar to mine...
I have several groups, and the master for each group is only one line, and the detail is between 1 and five lines, like so:
A
A1
A2
B
B1
C
C1
C2
C3
...The problem is, sometimes only the master record gets printed at the bottom of the page, and then the detail is printed at the top of the next page. I don't need each group on it's own page. I just want to be sure that if the detail can't fit on the page with the master, then I want the master to only print on the next page.
Can you help with this?

How can we Debug the workflow?

Hi,
How can we debug the workflow?
Please help me on debugging the workflow in step by step procedure?
Early reply is highely appriciable.
Regards,
Chow.

Hi,
If you want to set breakpoints in method which is used in workflow task then it is possible
till ECC5 am afraid about ECC6
you can see the graphical view of workflow through transactions said by Kalpesh
you can also use swwl (delete workflow) for viewing the container elements of the workflow.
SWI2_ADM1:Workitem without agents
SWI2_DIAG:Workflow with error
these transactions are also helpful
Thanks & Regards
Hari Sankar M

How can I use the field "Sales Order" on derivation?

Dear All.
This is about PA characteristic derivation.
I want to change the characteristic value "Sales Order (KAUFN)" by derivation.
But I cannot select the characteristic field on target field.
The field "Sales order(KAUFN)" doesn't exist there.
Why? How can I use the field "Sales Order" on derivation?
Y.C.Bae

Hi Bae,
in order to be able to choose fields KAUFN (for sales order) and KDPOS
(for sales order item) as target fields of derivation step 'enhancement'
you have to modify the coding of subroutine EXIT GET_ALLOWED_TARGETS
in program RKEDRCOPA like this:
    NAME-IDENTIFIER = 'CO-PA'.
    NAME-TABNAME = FIELDTAB_ENTRY-TABNAME.
    NAME-FIELDNAME = FIELDTAB_ENTRY-FIELDNAME.
    IF FIELDTAB_ENTRY-USGFL CA 'DUV'
BEGIN OF INSERTION *****
         OR FIELDTAB_ENTRY-FIELDNAME = 'KAUFN'
         OR FIELDTAB_ENTRY-FIELDNAME = 'KDPOS'
END   OF INSERTION *****
         OR FIELDTAB_ENTRY-FIELDNAME = 'KNDNR'
         OR FIELDTAB_ENTRY-FIELDNAME = 'ARTNR'
Actually sales order number and sales order item shouldn't be changed
by derivation (therefore they are no valid target fields in standard)
but if you need to fill them within an enhancement this modification
will help you to define them as valid target fields. But this is just
the technical frame so far; the logic from which table you'd like to
derive the sales order number correctly depends on your implementation
of the enhancement! I just want to ask you to be rather careful with
the implementation of the exit so that the sales order number isn't
changed in cases that shouldn't be concerned.
Regards,
Abhisek

How can i append a field directly to xtract structure.

(with out going to communication structure) while doing xtraction, if i hv a requirement to append a field directly to xtract structure. how can i append that field.

hai satish,
Follow these steps:
go to rsa6 --> select your data source --> double click on the it --> double click on extract structure --> Click on append structure.
enter ur Enhancing Field names,
go back to rsa6 in change mode---> remove hide check for newly added field..
now go to se37 ---> EXIT_SAPLRSAP_001(for transaction data )
Ur having some Include program Modify according to Ur fields.
Thanks,
kiran.

How can we debug the screen pop up?

How can we debug the screen pop up?

Hi,
if you know where the popup is raised it is easy of course as you just have to uses F6 to keep the debug mode running.
But there is a way to get the popup into debug mode similar to typing /h into the ok code field of a sandard dynpro. Therefore you have to do the following steps:
1) click the "Create a Shortcut" button in the gui to get a shortcut on your desktop (the button next to new session)
2) in the oped screen for shortcut setting choose:
     type -> system command
     command -> /h
     depending on gui release you have to enter a system ID -> use the one of your system and parameters -> just type abc
3) press finish to create the shortcut
If you have done this you can drag and drop the shortcut from the desktop to a sap session or popup to switch on the debug mode. One shortcut works for all systems you have, the system id in it does not matter.
Oh, while I often have the case that I forget to resize the window before the popup appears so i cannot access the shortcut directly on the desktop, just remeber that you can always open a small file explorer window go to the desktop folder and drag it from there ;o)
Best Regards
Roman

How can I debug BADI BBP_CREATE_BE_PO_NEW ??

Hello experts,
how can I debug BADI BBP_CREATE_BE_PO_NEW to find out what goes wrong with my coding?
I set breakpoint for external Web-user. I also set session breakpoints and resent the shopping cart using FM BBP_PD_SC_TRANSFER. The BADI is never debugged.
We use SRM 6.0 with classic scenario.
Any useful ideas?
Joe

Hi,
You can put an endless loop in your BADI BBP_CREATE_BE_PO_NEW ,as shown below and force the program to stop there. Now go to SM50 and switch to debug mode for the program and start debugging(take process that keeps hangs in your endless loop).
Data: l_check.
do.
if l_check eq 'X'.
exit.
endif.
enddo.
BR,
Disha.
DO reward points for useful answers.

How can I print with the black and white cartridge only?

I am trying to print using the black and white cartridge only because magenta is out of ink but I'm getting the following error message in HP Photosmart C7200 series print dialog:
The printer is out of ink.
The following ink cartridges are empty: Magenta. Replace these ink cartridges to resume printing.
How can I print with the black and white cartridge only?
Mac OSX 10.7.3
HP Photosmart C7280 (7200 series)
This question was solved.
View Solution.

I am absolutely disgusted by this; clearly a scam from HP to make more money by selling extra ink cartridges!! I will make sure to never buy any products from the shoddy rip off merchants at HP ever again!!
You should be ashamed!!

How can i debug with field(rbkpv-xblnr) wise in MIRO

Similar Messages

Maybe you are looking for