How can i decrease the fuzziness of my video clip in imovie?

I have imported video clips into imovie and when i crop out the background so the person is closer, it becomes fuzzy ... so i uncropped the clip and now i have exported the video using quick time and chose the 1920 x 1080 HD size which made it a little better although still kind of fuzzy ... when the screen is small, it is clear ... just want to know if there is something else i can look at ... thanks everyone!!

binu54 wrote:
Nokia 311's battery backup is too low
It is not possible, however, there are other measures that can possibly prolong your battery. You may watch this informative video courtesy of Nokia Support Videos - http://www.youtube.com/watch?v=PLa4ZJX_lAs

Similar Messages

  • How can I raise the volume on a video clip in Premiere Elements 12?

    I want to raise the volume on a video clip in Premiere Elements 12. Can anyone help?

    jcomput
    Always good to give the computer operating system involved in case any computer specific details needed to be included. But here is your
    generalized yet specific answer for Premiere Elements 12 and increasing the volume of a video clip.
    If you are in the Expert workspace...
    a. click and drag upward the orange band that runs horizontally through the middle of the audio clip.
    or
    b. go to Adjust Tab/Adjustments Palette/ Volume Panel expanded on move the volume slide toward +6 dB.
    0 db does not represent no sound. It represents the volume of the sound when it was recorded. 0 to +6 dB increases the sound above the recording level; 0 to infinity symbol decreases the sound below the recording level, finally to muted sound.
    Please let us know if you are OK with the details above. My blog post on PE12: Audio Features may be useful to you.
    ATR Premiere Elements Troubleshooting: PE12: Audio Features
    Thank you.
    ATR

  • How can I change the speed of a video clip?

    hi, I'm a new user of iMovie 08.
    I fail to find the function button that can make a video clip slow down or faster, such as change the speed to 60% of the normal speed,etc.
    I know iMovie 06 has this function,it's in video FX,duration,speed...but I can't find the menu in iMovie08.
    Is there anyone knows where it is?
    many thanks!

    Upgrade to iMovie 06.
    Slow / Fast Motion is easy with iMovie 06.
    iMovie 06 is a free download to iLife 08 owners. (THEY WANT YOU TO HAVE IT!)
    http://www.apple.com/support/downloads/imovieHD6.html
    Much has been written about the differences between iMovie 06 and iMovie 08. I have found the below link to be helpful.
    http://www.geethree.com/slick/imovie8.html

  • One specific webites's zoom is too big how can I decrease the zoom. (the font is normal) If I open new tab for new site that's normal. Im using a laptop. THANKS

    One specific webites's zoom is too big how can I decrease the zoom. (the font is normal) If I open new tab for new site that's normal. Im using a laptop. THANKS

    Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
    * http://kb.mozillazine.org/Zoom_text_of_web_pages

  • How can I decrease the leading on all hard returns?

    How can I decrease the leading on all hard returns? I have a paragraphs that has 12pt leading, but I want 8pt leading on the returns. Is there a way to change them all at the same time? I know you can increase them by using the space before and after tabs. They only let you go from 0" and up, but not in the negative.

    I figured it out. Instead of having two hard returns I just used one and used the space after. I was using the space after and before option incorrectly. Thank you.

  • HT3775 how can i open the file MPEG-2 Video, AC3 on my mac, when its coming from a sony camcorder?

    how can i open the file MPEG-2 Video, AC3 on my mac, when its coming from a sony camcorder?

    I think those files are Samsung's proprietary format, so only the Samsung software can open and display them.  If they do not make their software for OS X, then you are stuck requiring windows.
    I thought the DVR itself lets you save as standard avi as the backup file format?

  • How can you keep the highest iphone 4s Video quality the same when exporting it from iMovie.

    How can you keep the highest iphone 4s Video quality the same when exporting it from iMovie.

    InDesign's PDF export engine does not transcode your videos, they are embedded exactly as they were in the original file. The Flash Player runtime which displays video inside PDF files may not show a perfect match to Quicktime etc. because most video playback tools aren't designed for a color-calibrated workflow, but they should be close.
    The playback quality (blocking and aliasing) will be affected if the clip is not playing at 100% (screen pixels != video pixels) and in PDFs with the standard video player widget, that will only ever happen when you use 'floating window' mode. PDF pages have physical dimensions, so viewing them at "100%" does not make them match screen pixels.
    If you don't mind the video clip being smaller than the media annotation in which it's playing, then use my free upgrade to the Acrobat playback widget - VideoPlayerX - which maintains 1:1 pixel scale until the page is zoomed out too far for it to fit. You can install the widget into InDesign so it's used by default when exporting.

  • Can I edit out the middle of a video clip in iMovie?

    I know how to crop the beginning or end of a video, but I would like to crop out a section in the middle. I don't want to lose the part following the cropped frames. What must I do? Thanks for any advice you can offer. Miriam

    Can I edit out the middle of a video clip in iMovie?
    Yes.
    What must I do?
    Basically you have three options:
    1) If the clip is in the "Event" window, simply select (i.e., set and adjust if necessary "in" and 'out" points) the segment you want and transfer it to your "Project" window and place it where you want it.
    2) If the clip is already in the "Project" window, simply select (i.e., set and adjust if necessary "in" and 'out" points) the segment you want to keep...
    a) and press the "Split" option in the edit menu (or the "Split Clip" option in the context menu) to divide the clip into three segments. Then select each of the segments you don't want and press the "Delete" key to remove them from the "Project" window.
    b) or, even easier, simply press the "Trim to Selection" option in the "Edit" menu.
    All of these work flows do not physically remove anything from the "Event" but merely perform a non-destructive edit of the project for the purpose of later output.

  • Can you keep the audio of one video clip but add another clip?

    Can you keep the audio of one video clip but add another clip?
    I want to edit in other clips during an interview with a person, but have the interviewee's voice in the background?

    There are several way to do this;
    Replace with clip...
    http://help.adobe.com/en_US/premierepro/cs/using/WS1c9bc5c2e465a58a91cf0b1038518aef7-7d27a .html#WSA009AFF1-4D78-43cc-B60D-5B46E5ACB117

  • Is it possible to control the duration of a video clip in IMovie? Speed

    Is it possible to control the duration of a video clip in IMovie? Speed
    it up/slow it down?

    I actually think the content gets smoother in faster mode. But maybe that's just my opinion.
    By the way, the fast/slow/reverse effect is pretty sensitive, i use it for my fight scenes in movies and I can only raise the bar one notch faster before it starts to look cheesy.

  • How can i reduce the noise on this video?

    I have used Keylight to key some chromokey footage onto a white background.
    However, I still have a lot of noise on the video, by this I mean fuzzyness, instead of good rich colors - you can see for yourself if you download a sample of the file which I have linked to here:
    http://www.youtube.com/watch?v=-MmBGI-JUMk
    Obviously the actual file has proper dimensions unlike the YouTube example! This example also doesn't show the noise quite as well as the actual Flash file, it's a little more intense than it looks here.
    How can I make the video fuller in color, to reduce the noise....?
    Thanks.

    The noise looks like genuine camera noise from poor lighting with ramped up sensor sensitivity. Therefore, as a start, I'd run the clip through a pre-comp and use the Remove Grain effect or tools like RevisionFX' DE:Noise, Red Giant's Key Correct Pro and so on. If it's DV/ HDV or similar, some de-blocking by ways of similar tools is also recommended. This should already improve matters notably. Then, as Sébastien said, study the super tight junk matte tutorial and apply the technique to your footage. The less pixels to key, the more efficiently the keyer can expand its range on the remaining ones. If you then still experience jaggy/ noisy edges a second application of the aforementioend plug-ins might do the trick. Other options include tools like Twixtor, SmoothKit, RSMB, RE:Fill etc. to mend holes and smear gaps. also, since the person is wearing dar clothes, the old trick of using a dark Inner Glow might also be applicable.
    Mylenium

  • How can i change the path for uploadin videos??

    i m using javax.servlet.servletcontext for setting the path for storin upload videos...
    by using the getrealpath able to store videos in web-inf file...
    how can i change the location...

    this is the part of code in which i want to change my storage location:
    ** * The base path corresponds to the base directory of the
    * application context's WEB-INF directory. This means that
    * this directory is NOT visible to the end user.
    public static String getBasePath(javax.servlet.ServletContext context)
    { return context.getRealPath("/") + "WEB-INF" + directorySep;}
    /** * The temporary directory used to store files while they are
    * being uploaded. */
    public static String getTempPath(javax.servlet.ServletContext context)
    { return getBasePath(context); }
    /** * Gets the upload directory - used to indicate the local file
    * system storage area.
    can u tell me now how to change the context value???
    and how to change the storage loction??

  • How do I mute the audio of a video clip in PS 6

    I have video clips on several layers in the timeline and want to mute the audio of specific video clips - they are on video lines, not the audio line

    an interesting development as I proceed with the video. I guess I'm missing an integral concept here. It appears that some of my cideo clips import into the project and the segments have a blue color. These offer an option to fade in or out the audio, to mute the audio or adjust the volume.
    Other vidoe clips import purple, like the still image files, and hence these do not offer any audio options, just motion objects.
    So, what am I doing wrong? Why do some video clips import (purple) as image files?

  • No longer able to adjust the length of a video clip in imovie 6 HD

    Without warning (or reason) I can no longer adjust the length of a video clip (new or old) in imovie. I've tried the old way of highlighting the clip and putting the cursor at the start or end, but the cursor doesn't change. I've also tried double clicking on the clip but then the length is fixed.
    This problems happens in new and old movies and remained after I deleted and reinstalled imovie.

    I searched further using the correct word (trim) and found that I had to turn off the audio levels

  • How can I  decrease the size of a green-screened image relative to its background image?

    In iMovie 9.0.9 if it possible to reduce the size of a green-screen image relative to the  size of its background image?  Using KenBurns and Crop I  can somewhat enlarge the green-screen image.  But is there any way(s) to shrink it?

    FrecklesandEmeralds schrieb:
    Ridiculous or not, it's what I'm working with...is there any way to do what I'm asking?
    I gave you the answer:
    But you are not aware that an EPUB is a ZIP file.
    FrecklesandEmeralds schrieb:
    It's just huge, even before I zip it...how can I see what item is taking up the most space?
    I did not write that you should zip.
    I wrote UNzip it. And have look into the package, what is inside which is causing the size.

Maybe you are looking for