How can i decrease the resolution of my nokia asha...

Nokia 311's battery backup is too low

binu54 wrote:
Nokia 311's battery backup is too low
It is not possible, however, there are other measures that can possibly prolong your battery. You may watch this informative video courtesy of Nokia Support Videos - http://www.youtube.com/watch?v=PLa4ZJX_lAs

Similar Messages

How can i set the resolution on my imac ''27 in to 1024*768?

hello,
i'm new to imac
how can i set the resolution on my imac ''27 in to 1024*768?
its only gives me to options
1- 1280*720
2-800*600
thanks

My mid-2011 27" iMac, ML 8.3 has 1024x768:

How can I get the resolution of an image file in JSP?

how can I get the resolution of an image file like jpg,gif,png in JSP ?

Hii,
If by the resolution, u mean size..this is how u can come to know....
String add = "path/to/some.jpeg";
javax.swing.ImageIcon chain = new javax.swing.ImageIcon(add);
int height = chain.getIconHeight();
int width = chain.getIconWidth();
Hope that helps.
regards

One specific webites's zoom is too big how can I decrease the zoom. (the font is normal) If I open new tab for new site that's normal. Im using a laptop. THANKS

One specific webites's zoom is too big how can I decrease the zoom. (the font is normal) If I open new tab for new site that's normal. Im using a laptop. THANKS

Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
* http://kb.mozillazine.org/Zoom_text_of_web_pages

How can I decrease the leading on all hard returns?

How can I decrease the leading on all hard returns? I have a paragraphs that has 12pt leading, but I want 8pt leading on the returns. Is there a way to change them all at the same time? I know you can increase them by using the space before and after tabs. They only let you go from 0" and up, but not in the negative.

I figured it out. Instead of having two hard returns I just used one and used the space after. I was using the space after and before option incorrectly. Thank you.

How can i install bangla font in my nokia asha 311...

How can i install any font in my nokia asha 311 manually. Help me....please (signhnsk). It's my last chance. I cannot distrub you any time. Help me.....

Ah? As already said, it isn't possible for you to manually install languages. You need to flash a different software variant of the phone which contains that language built-in.
So better is to visit the Nokia Care Center and ask them to do the job

Help, how can I fix the resolution of my videos???

The videos on my Ipod don't show too good on the tv , I want it too have a sharper image but it looks kind of faded when I see it on the tv. Is there anyway that I can fix the resolution of the videos before I put them into my Ipod??? Is there any program that I can use to fix my videos so they can look better????? HELP SOMEONE
Windows XP video ipod 30G
Windows XP video ipod 30G

You have to convert your videos to a higher resolution: Choose 640x480 (VGA) instead of the standard 320x240 (1/4 VGA): It will look much sharper and it will play also on your iPod's display.
But you will have to re-convert all your videos again.

How can I increase the resolution of a picture used in the burned DVD?

My version is Elements 10 and I have always had a problem when making the main menu that included a picture. Even if the picture is 12 MPixels it appears as if is less then 1 MPixels.

VideoEditor
From what you wrote, you are not targeting the resolution of the DVD-VIDEO on DVD disc that you are producing in Premiere Elements. Rather you are targeting the disc menus that are applied to a given project destined for DVD-VIDEO on DVD . Difference.
What you get in the disc menus (main and scene) traces back to the creation of .psd files in Premiere Elements folders on the computer hard drive hard drive. There 3 different .psd sets for each theme. One "s" for standard, "w" for widescreen, and "hd" for high definition. Whether you are in NTSC or PAL, "s" and "w" have a frame size of 720 x 576, and "hd" 1440 x 1080.
The choices (what you see) for "hd" and non "hd" menus in the disc menus section of the program is determined by the project preset. If you have a "hd" project, you will get some "hd" choices mixed with non hd choices. When you pick one of the non hd choices, believe it or not, the program may give you the "s" 4:3 version of the .psd and not the "w" version. The details can be overwhelming.
Bottom line:
You can set the resolution of your main menu inserts as high as you want, however you may crash the feature and or program and still not achieve better clarify/sharpness for the image in Disc Menu Preview or in playback of the final product. For the inserts, you can scale them to fit the insert space if black borders. Some buttons can be scaled to a larger size, of course within the limits of the total space provided and only if you do not create overlapping of the buttons.
Please review and if you need clarification on anything written, please do not hesitate to ask.
Thanks.
ATR

How can I decrease the size of a green-screened image relative to its background image?

In iMovie 9.0.9 if it possible to reduce the size of a green-screen image relative to the size of its background image? Using KenBurns and Crop I can somewhat enlarge the green-screen image. But is there any way(s) to shrink it?

FrecklesandEmeralds schrieb:
Ridiculous or not, it's what I'm working with...is there any way to do what I'm asking?
I gave you the answer:
But you are not aware that an EPUB is a ZIP file.
FrecklesandEmeralds schrieb:
It's just huge, even before I zip it...how can I see what item is taking up the most space?
I did not write that you should zip.
I wrote UNzip it. And have look into the package, what is inside which is causing the size.

How can I set the resolution of my external display to 1280x800?

Hi, I'm using a Wacom Cintiq 12WX external pen tablet display with a 24" iMac.
The recommended resolution for this Cintiq is 1280x800. But when I go to System Preferences>Displays set the resolution of the display, the only available options for "Wacom Cintiq 12WX" are:
640x480
800x600
832x624
848x480
1024x768
1024x768 is my nearest option, but it has a different proportion than the display's physical shape--resulting in a slightly stretched display. Because I work with graphic design, this is not exactly desirable...
None of the other resolutions have the same proportion as 1280x800, so a stretch seems inevitable; not even working with a smaller resolution will give me the desired ratio.
So my question is, is there any way to choose resolutions other than those listed in the "Display tab" of System Preferences?
I also noticed that I have the option to rotate the tablet screen 90 degrees; when I do this, the option 800x1280 becomes available, but of course it's sideways...
Any help at all would be very greatly appreciated!

thund3r0us wrote:
Thank you for your help.
I installed the update you suggested, but nothing has changed in my Cintiq 12WX Display menu in System Preferences.
Which update ?
The OSX update or the driver update or both ?
Might be neccessary to reinstall the Wacom driver after the OSX update.
And I concur with Kenichi, if all things fail contact the Wacom Support.
That thing has to work as advertised.
Good Luck
Stefan

How can I restore the data on my NOKIA 6131 phone ...

something went wrong with my cell phone. when i checked, everyone told me that i will need to add new software, but all the data will be lost. how can i restore these data after updating the software on my cell.
thxxxx

you can use Nokia Pc suite to backup data prior to firmware update. once you update you can restore your backup file using the same software.
newest version is available through here
http://europe.nokia.com/A41157164
Fear not those who argue but those who dodge

How can I remove .nrw files from my NOKIA Asha 200...

When I am connecting my NOKIA Asha 200 with my PC by data cable, I am watching almost 50 nos. *.nrw files inside the Image folder. I tried to delete all those file, but I was unable. Is there any one, who can tell me how to remove those files from my phone memory?
Thanks & regards,
Sudip Sinha.
Calcutta.
India.

Back-up your data and then Factory Reset your phone ...(Menu-->Settings-->Restore Factory settings-->Settings only.. followed by 12345 which is default security code, unless set by you) .. When the phone reboots, check whether these .nrw files are now converted to .jpg .. If so, you should be able to delete them now ...

How can I change the resolution of one monitor in a dual monitor set up?

I'm trying to help someone set up an extended desktop using two monitors connected to a mac mini. One monitor is at the maximum resolution, but the other is not, and thus feels enlarged or zoomed in. I know a higher resolution is possible because the monitor has a button menu that shows a higher resolution, but it seems to be disabled - as I cannot select the maximum.
Also can't seem to change it under the mac mini's display preferences.
Any suggestions? We would really appreciate it.

This model simultaneously supports 1920x1200 on an HDMI or a DVI display (using the included HDMI-to-DVI adapter) and2560x1600 on a Thunderbolt or Mini DisplayPort display
The HDMI connection does not support higher than 1920X1200
What resolutions are running now and on what connection and what is the grayed-out resolution?

How can I change the resolution of a display connected to my iPad 3 via VGA?

I have been looking for this for almost an hour now. Google doesn't help and the preferences of the new iPad 3 are just crap, sorry. Why can't you search through the preferences? There's really plenty of room for improvement there.
The display is a 1920x1200 and I only get 1024x768 at maximum, even though the new iPad 3 should be able to display way higher resolution. Sorry Apple, but this *****. What also ***** is that I can't copy my Apple-ID passwort via cmd+C and cmd+V in the browser login. Costs me 20 - 30 seconds every time I have to put it in. My time is valueable to me, but it seems not to Apple!

Hey James, thanks for your reply. You're making a really good point there. I guess a lot of users will probably behave the way you suggest in your reply. For me, I try to have the most secure passwords possible and therefore use an advanced software like KeePassX for the job. It's a password safe that has a strong master password and from which I copy the passwords depending on the site I visit at the moment.

How can U decrease the Log Size in MS-SQL server?

Hello friends,
                I am in Big Trouble. I have a Problem.we are Using MS-SQL server 8.00.924. The Database Log size is almost Full.But BackUps are not Done successfully ,,How to Shink the Log file,, Any body pls help me I will give more Points.
Regards,
Balaram

Hi Balaram,
Please see the link and scripts which is given hereunder.
http://support.microsoft.com/kb/873235
You can check this method also.
Method 1 Delete the Log (LDF) File
Although this method is simple, it is not supported by Microsoft®. Additionally, it may not work for all systems. Follow these steps to try the simple method on your system.
Ensure that no users are logged into the database.
Open Query Analyzer or another program to execute SQL scripts. Ensure that dsdbase is not selected in the drop-down DB list.
Open and run the script DETACH.sql. This script detaches the DataLyzer® database from the SQL server database.
Make a backup copy of the DSdbase_Data.MDF and DSdbase_Log files.
Rename the DSdbase_log file to another name, for instance backup_DSdbase_log.
Open and run the script ATTACHMDF.sql. This script re-attaches the DataLyzer® database to the SQL database without attaching the log file. NOTE: If your database is not stored in the location c:mssql7data change the SQL script to reflect the location of your DSdbase file.
If the script runs successfully, a new DSdbase_Log file will automatically be created to the original size specified when creating the database. It is suggested that users keep the backup copies made of their database and log files for several days to ensure an available backup if anything happens to the new log file.
If the script does not run successfully, method 1 will not work for your current DataLyzer® Spectrum database. This is because your databases structure is dependent on the logfile. In this case, re-name the original log file back to DSdbase_log. Run the script ATTACH.sql and again change the file location to the location of your DataLyzer® database, if necessary. When the database is successfully re-attached, try using method 2 to shrink the log file.
Method 2 Truncate and Shrink the Log (LDF) File
Although this method of shrinking the log file is more complicated, it is supported by Microsoft®, and it will work for almost all systems. Follow these steps:
Ensure no users are logged into the database.
Open Query Analyzer or another program to execute SQL scripts. Ensure that dsdbase is not selected in the drop-down DB list.
If you have already tried method 1, or if you have a current backup of you database and log file, skip to step 7
Open and run the script DETACH.sql. This script detaches the DataLyzer® database from the SQL server database.
Make a backup copy of the DSdbase_Data.MDF and DSdbase_Log files.
Open and run the script ATTACHMDF.sql. This script re-attaches the DataLyzer® database to the SQL database. NOTE: If your database is not stored in the location c:mssql7data, change the SQL script to reflect the location of your DSdbase file.
Select dsdbase from the drop down DB list in the program you are using to execute the SQL scripts.
8.      Run VIEW2LDF.sql. Below is an excerpt similar to what will be displayed on your screen: FileId   FileSize    StartOffset    FSeqNo      Status   Parity CreateTime
2          1245184   819              1292   0          64         1999-12-15 10:25:13.597
2          1245184   1253376       1225    0          128        1999-11-19 09:12:57.743
2           1245184   2498560       1224    0          128     1999-11-19 09:12:23.82
2          1499136   3743744       1318    2          64         1999-12-15 10:25:36.880
Locate the 2 in the status column. The location of the 2 determines where the active portion of the log is.
If the 2 is in the bottom half of the log, open and run the SQL script MOVE2LOOP.sql. This script is an infinite loop used to move the active portion of the log.
Re-Run the VIEW2LDF.sql script to make sure that the 2 is now located in the first half of the script.
Run the script SHRINKLOG.sql to reduce the size of the database.
Run the script VIEW2LDF.sql to view the new status of the log file. You should notice that the number of lines is significantly smaller than it originally was.
If you wish to further reduce the size of the database, repeat steps 8 through 13.
Text Context of SQL Scripts
ATTACHMDF.sql
sp_attach_db @dbname=N'dsdbase', @filename1=N'c:mssql7datadsdbase_data.mdf'
ATTACH.sql
sp_attach_db @dbname=N'dsdbase', @filename1=N'c:mssql7datadsdbase_data.mdf',
@filename2=N'c:mssql7datadsdbase_log.ldf'
Detach.sql
sp_detach_db dsdbase
MOVE2LOOP.sql
USE DSDBASE
GO
CREATE TABLE VIRTUAL_LOG_FILE_WRAPPER (CHAR1 CHAR(4000))
GO
DECLARE @I INT
SELECT @I = 0
WHILE (1=1)
BEGIN
WHILE (@I < 100)
BEGIN
INSERT VIRTUAL_LOG_FILE_WRAPPER VALUES ('A')
SELECT @I = @I + 1
END
TRUNCATE TABLE VIRTUAL_LOG_FILE_WRAPPER
BACKUP LOG DSDBASE WITH TRUNCATE_ONLY
END
SHRINKLOG.sql
DBCC SHRINKFILE (DSDBASE_LOG, TRUNCATEONLY)
BACKUP LOG DSDBASE WITH TRUNCATE_ONLY
VIEW2LDF.sql
DBCC LOGINFO(DSDBASE)
Regards,
Anil

How can i decrease the resolution of my nokia asha...

Similar Messages

Maybe you are looking for