How can I define my work week in 30 minutes steps?

Hi developers,
I have the following problem: A customer wants to define his work week with e. g. start time: 8:30am and can only chose between full hours. Is it possible to define lower iterations (e. g. 30 minutes steps)?
We defined it in /_layouts/regionalsetng.aspx.
Can anybody help me?
Best regards,
Björn

Based on the underlying structure, it appears that the internal definition relies on the "hour" number for a start and end,
http://msdn.microsoft.com/en-us/library/microsoft.sharepoint.spregionalsettings.workdaystarthour.aspx.
That being said, you might be able to change it to a "30" minute start hour, (e.g. 510 for 8:30am). However, I'm not sure if this will work or is supported. If it does work, you might experience unintended behaviors in other areas that use the calendar.
Dimitri Ayrapetov (MCSE: SharePoint)

Similar Messages

  • How can a non-standard calendar week be defined?

    I have a requirement to determine the calendar week when the week is non-standard week.
    The standard calendar week is Sunday - Saturday.
    Our week is defined as Saturday - Friday. We need to detrmine the calendar week of the year based on a Saturday - Friday Calendar week.
    How can I calculate the calendar week year based on this definition?
    You assistance is appreciated.
    Den

    You can use transaction SCAL to change or create a new calendar!
    Regards,
    Cris

  • How can i define database name in oracle ADI

    Hai Friends,
    I am facing a problem when i am going to define database name in oracle ADI there is a error u can enter minimum 6 char database name but my database name is PROD it is only 4 char long. how can i define can i will change the database name. Please suggest me.
    If u have any query regarding oracle apps plse discuss with me.
    Many thanks
    Ghanshyam khetan

    Database is used internally by ADI and does not have any relationship to the name of your database.
    Using ADI I am able to create a database with the following:
    Name - My Wacky Database
    GWYUID and FNDNAM as usual
    Connect String - VIS
    I'm able to signon and work successfully with that definition. The connect string is more important in this scenario as that tells the networking layer which database to actually talk to. As you can see here mine is only three characters.

  • How Can i Block the Work Center Once is used in Maintainence Order

    Dear Experts,
    How Can i Block the Work Center Once is used in Maintainence Order in PM module.
    In standard its not blocking the Work Center automatically. How this can be achieved.
    Regards
    Raghu
    Edited by: raghu m on Apr 21, 2009 10:36 AM

    Hi Muthukumar,
    1. You can using the user exit or BADI to control this.
    CONFPP01            PP order conf.: Determine customer specific default values           
    CONFPP02            PP order conf.: Customer specific input checks 1                     
    CONFPP03            PP order conf.: Cust. specific check after op. selection             
    CONFPP04            PP order conf.: Customer specific input checks 2                     
    CONFPP05            PP order conf.: Customer specific enhancements when saving           
    CONFPP06            PP Order Confirmations: Actual Data Transfer                         
    CONFPP07            Single Screen Entry: Inclusion of User-Defined Subscreens            
    BADI
    WORKORDER_CONFIRM
    the above are the user exits that are available fro the CO11N tcode.
    2. we have to take a help of the abaper to write coding fort his.
    3. The user exit should be called for the
    Work Center : YYYYY
    then check the relevant Work Center Once is used in open Maintainence Order and if it has a entry if then give a error message else allow the CO11N to perform.
    Regards,
    Sankaran

  • KM Search: How can I define a query for the user who currently logged on?

    Hello,
    I want to use the KM Search iView to display all documents from the currently logged on user in a certain sort order. The result should be some kind of report for the user...
    In the search option I can define a default sort order. And I can also define it for a special user with cm_modifiedby(value=username)
    But how can I define the predefined property value generically for the current user?
    I tried to insert following values in the parameter Predefined Properties of the search option:
    Predefined Properties (csv): cm_modifiedby(value=<user.id>)
    Predefined Properties (csv): cm_modifiedby(value=%user.id%) -> like in the predefined properties
    Predefined Properties (csv): cm_modifiedby(value=$sap_user) -> like in the xml forms builder
    But non of these 3 parameters worked. Has anybody an idea what the right variable is?
    Thanks a lot.
    Best regards
    Nicole

    Hi Nicole,
    1. First of all you need to use "<User.UserID>" to get the currently logged on user.
    2. You need to create an AppIntegrator iView (so based on com.sap.portal.appintegrator.sap.Generic) in order to be able to use this dynamical parameter. The parameter "URL template" should look like:
    <Request.Protocol>://<Request.Server>/irj/servlet/prt/portal/prtroot/com.sap.km.cm.basicsearch?layoutSetMode=exclusive&ResourceListType=com.sapportals.wcm.SearchResultList&SearchType=quick&rndLayoutSet=SearchResultLayoutSet&SearchCompsName=UISearchComponents&QueryString=*&SelectedCustomProps=cm_modifiedby(value=<User.UserID>)
    Best regards,
    Robert

  • How can I share just two weeks of my icalender with friends

    How can I share just two weeks of my icalendar with friends?

    To view your library on another computer on the same network, you could use "Sharing". Set the iPhoto Preferences to share your entire library or selected albums:
    Also, if possible, can I edit and/or download photos to one computer's iPhoto and have them updated (sync) with the other computer?
    iPhoto Libraries cannot be synched between computers. If you want to have the libraries on both computers identical, you need to use the same library on both machines. Store your iPhoto library on an external disk (formatted MacOS X Extended (Journaled) and plug the disk into the mac you are currently working with. Don't put the library onto a network drive - that will be a very sow access and may corrupt your photo library.
    To add new photos/events to iPhoto your other mac you can use the Photo Stream.
    Finally, how do all of these photos with edits, etc relate to what I see on my iPad 3rd generation and iPhone 5?
    You can only sync one iPhoto library with each OS device. If you sync a device alternately with each computer using iTunes Photo sync, the albums synced from the other photo library will be replaced by the new sync.
    Regards
    Léonie

  • How can we define custom error page in protal application

    How can we define custom error page in protal application, like we define "jsp Error page " in JSPs

    Hi,
    Check these:
    Customization of Portal Runtime Errors and portal standard error codes
    http://help.sap.com/saphelp_nw04/helpdata/en/9a/e74d426332bd30e10000000a155106/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/ec/1273b2c413b2449e554eb7b910bce7/frameset.htm
    Regards,
    Praveen Gudapati

  • I have a new MAC MINI and I want to install a second monitor.  I have one connected to the HDMI and it works.  I can't get a signal to the other one.  It is connected from the thunderbolt to its HDMI port.  How can I make it work?

    I have a new MAC MINI and I want to install a second monitor.  I have one connected to the HDMI and it works.  I can't get a signal to the other one.  It is connected from the thunderbolt to its HDMI port.  How can I make it work?

    Could be a bad cable or bad Thunderbolt port.
    You have 90 days of free telephone support on a new device. You can call them at 1-800-MY-APPLE. Have your Mini's serial number handy
    You can also make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • My Zoom in Gesture Doesn't Work on Safari How can i make it work?

    I just bought a mac book pro 2011 and i know that the zoom in gesture used to work on safari at first but it doesnt anymore how can i make it work again?

    So it does not work at all in Safari?  Do you have any other web browsers installed that you could test it out on to see if it is just acting up with Safari?

  • How can I define Double Click Processing in SAP Query ?

    The first question is : How Can I define drill-down for SAP Query report ?
    The second one :  How can I program Double Click in SAP Query report for Different columns like ALV Grid processing ?

    you can attach a repot or at tcode etc in an SAP query using report assignment in SQ01 but as far as i remember you cannot attach multiple reports.
    regards,
    khusro habib

  • I cannot access to my iTunes on my computer via my Apple Tv, but it works with my daughter's macbook, how can I make it work with my pc?

    I use to be able to access all my music and videos on my iTunes  via my Apple TV, but since a few months it hasn't work. My daughter tried with her computer and apple ID and it worked, but I want my Library to be accessible. I tried starting it over, rebooting it, but nothing seems to be working.
    How can I make it work?
    Thank you!

    Check firewall and any security software installed on your system. Toggle off/on home sharing on your computer.

  • How can we get ADFSecurity work when used in OC4J, OID and OAM?

    I am getting error in http server log "mod_oc4j: Response status=499 and reason=Oracle SSO, but failed to get mod_osso global context."
    But I am not using Oracle SSO and my client doesn't want to use it either, I am using OAM SSO(CoreIDSSO) in my configuration. Please read the details below.
    I am using ADFSecurity in an app that is protected by OAM. To migrate ADFSecurity permissions from
    system-jazn-data.xml to OID, I used JAZNMigrationTool to populate OID with Grantees and Permissions. OAM gives login page, and authentication works fine.
    But ADFSecurity is not working. ADFComponent Delete button is enabled even for roles that dont have permissions for the iterator delete.
    - The app works fine when I use without OAM. ADF Security permissions work fine.
    - The app works fine when used with OAM, but with ADFSecurity disabled (enforce=false).
    - When I enforce ADFSecurity alongwith OAM, ADFSecurity is not working.
    In the doc "Oracle Containers for J2EE Security Guide b28957", there is a mention of use of CoreIDPrincipal for permissions. Our OID Permissions entries show
    LDAPRealmRole for attribute orcljaznprincipal. I am not sure if this could be the reason.
    We have configured AccessServerSDK for the SOA instance and have policy for the urls in the policy manager. We have entries in orion-application.xml, orion-web.xml and system-jazn-data.xml as per the documentations.
    How can we get ADFSecurity work when used with OID and OAM?

    Have you been able to successfully integrate OAS with OAM & OID? We have similar requriement and so far we have not been able to get it working.
    We have application specific roles which we map to OID roles using orion-application.xml.
    Any pointers to achieve this would be greatly appreciated.
    thanks,
    Dipal

  • How can I see the whole week with calendar built-in app ?

    How can I see the whole week with calendar built-in app ? My husband has an ipad and he can see the whole week and the whole year... is it possible with iphone 4 ?

    What you see is what is available.
    Turning the iPhone into landscape mode with Month, Day, or List view selected provides the closest thing to seeing an entire week.

  • HT201272 How can I see the whole week with calendar built-in app ?

    How can I see the whole week with calendar built-in app ?  My husband has an ipad and he can see the whole week and the whole year... is it possible with iphone 4 ?

    You have posted in the itunes store forum.  This has nothing to do with the itunes store.

  • How can I define "java.util.ResourceBundle" in my Code ?

    Dear Mr. MLRon,
    Thanks to you for your replying to me.
    How can I define "java.util.ResourceBundle" in my Code ? To more understanding about my problem I can say that the Persian Font is Like as Arabic, but the Java can not Recognize it. please tell me how can I add "java.util.ResourceBundle" to my code and what should I do then?
    Thank you in advance,
    Tantan.

    Please stop starting new threads for this. Please reply in the original thread!
    http://forum.java.sun.com/thread.jspa?threadID=627917

Maybe you are looking for