How can I define the path to sync my I-pad (he does it by default on the c-drive)

By default, the system  sync on c:...mobile sync/back up (created by the system itself).
Have not enough memory on my C-drive and would like to back up on a D-drive or external HD.
I tried via Edit/Preferences where I could indicate where to save the media but not the back up.
When I "deselect" in I-tunes the "books" and "apps" from the sync...than he removes all my books or apps from the I-pad (do not understand why).
Can somebody help me?
Thanks
Laëtitia

Hi,
Apparently there are lots of feedback on this issue. As I have the save config I wanted to check so I just tried a few changes on my phone with adresses... notes... in outlook contact and everything synced well on the phone. Using outlook 2010 (don't know wich exchange server running) and iPhone5 with iOS 7.1.1.
Have you tried resync the iphone's account ?
(you might want to backup before doing the following)
Settings > Mails, contact, calendar > exchange > uncheck/check contact
(if asked choose to delete exchange's contact from your phone.)

Similar Messages

  • I can not sync my iPhone to the computer. I keep getting up an error message that synchronization does not want to start. I have uninstalled iTunes and then reinstall it. But the same warning box will appear. How can I get my phone in sync again?

    Can someone please help me get my iPhone to sync to your computer?
    I can not sync my iPhone to the computer. I keep getting up an error message that synchronization does not want to start. I have uninstalled iTunes and then reinstall it. But the same warning box will appear. How can I get my phone in sync again?

    Hello lenmin,
    Thanks for using Apple Support Communities.
    To help resolve this issue where you're repeatedly prompted to authorize with your Apple ID in iTunes when syncing, please follow the directions in the article below.
    iTunes: Missing folder or incorrect permissions may prevent authorization - Apple Support
    Have a great weekend,
    Alex H.

  • I have a iphone 4s with ios 8.3 and I used to be able to sync only a week or two of emails from outlook email.  Now it won't let me do that and it syncs all my inbox.  How can I change it back to sync less.  I can't find the right place.

    I have a iphone 4s with ios 8.3 and I used to be able to sync only a week or two of emails from outlook email.  Now it won't let me do that and it syncs all my inbox.  How can I change it back to sync less.  I can't find the right place.

    I understand, as that was the place I would change it before 8.3 but now that option of Mail Days to Sync is not available?  Any idea why that would be?

  • How can i define a boolean variable with the condition if i got a specific text on a selected column?

    How can i define a boolean variable with the condition if i got a specific text on a selected column?
    Example:
    my select results:
    [id = 102] [Company = 'Microsoft']
    If i got microsoft in 'Company' i want to my another table with the columnName "Microsoft" get "true".
    Can you help me?

    That is called 2-table UPDATE.
    Example:
    http://www.sqlusa.com/bestpractices2005/updatewithcorrelatedsubquery/
    Kalman Toth Database & OLAP Architect
    Free T-SQL Scripts
    New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

  • How can I define the possible entries for "invoicing process" at fkkinv_ma?

    At the transaction code fkkinv_ma, I fill in the fields "Date ID" and "Identification" but I have a problem with the field of "Invoicing Process". When I psh theF4 button, there comes no search help. What should I do? Should I define the possible entries first? If I should, how can I define the possible entries for "invoicing process"? How is the customization done?
    Thanks in advance for the answers.

    You have to define them in the IMG 
    Financial Accounting (new)
    Contract Account Recievable and Payable
    Business Transactions
    Invoicing
    Invoice Types
    You have to set up a number range, decide what type of Financial transactions should not be invoiced -- like  Dunning Charges
    then you have to have a developer create the form and form class of invoice.

  • Events entered on my iphone calendar do not appear on my ipad calendar, but events entered the other way around (on Ipad DO appear instantly on my phone calendar. How can I get these calendars to sync both ways instantly?

    Events entered on my iphone calendar do not appear on my ipad calendar, but events entered the other way around (on Ipad DO appear instantly on my phone calendar. How can I get these calendars to sync both ways instantly?

    If you're trying to sync an iCloud calendar, go to Settings>Mail,Contacts,Calendars>Default Calendar on your iPhone and make sure you have selected your iCloud calendar as your default.

  • KM Search: How can I define a query for the user who currently logged on?

    Hello,
    I want to use the KM Search iView to display all documents from the currently logged on user in a certain sort order. The result should be some kind of report for the user...
    In the search option I can define a default sort order. And I can also define it for a special user with cm_modifiedby(value=username)
    But how can I define the predefined property value generically for the current user?
    I tried to insert following values in the parameter Predefined Properties of the search option:
    Predefined Properties (csv): cm_modifiedby(value=<user.id>)
    Predefined Properties (csv): cm_modifiedby(value=%user.id%) -> like in the predefined properties
    Predefined Properties (csv): cm_modifiedby(value=$sap_user) -> like in the xml forms builder
    But non of these 3 parameters worked. Has anybody an idea what the right variable is?
    Thanks a lot.
    Best regards
    Nicole

    Hi Nicole,
    1. First of all you need to use "<User.UserID>" to get the currently logged on user.
    2. You need to create an AppIntegrator iView (so based on com.sap.portal.appintegrator.sap.Generic) in order to be able to use this dynamical parameter. The parameter "URL template" should look like:
    <Request.Protocol>://<Request.Server>/irj/servlet/prt/portal/prtroot/com.sap.km.cm.basicsearch?layoutSetMode=exclusive&ResourceListType=com.sapportals.wcm.SearchResultList&SearchType=quick&rndLayoutSet=SearchResultLayoutSet&SearchCompsName=UISearchComponents&QueryString=*&SelectedCustomProps=cm_modifiedby(value=<User.UserID>)
    Best regards,
    Robert

  • How can I stop my nano from syncing every time I do something?  Sometimes it takes overnight to complete the sync.

    How can I stop my nano from syncing every time I do something?  Sometimes it takes overnight to complete the sync.

    Check your sync settings on the Music and other tabs. Personally I untick the box that says "Open iTunes when this iPod is connected" and under Edit > Preferences > Devices I tick the box that says "Prevent iPods, iPhones, and iPads from syncing automatically". This means that I get to choose and, if necessary, edit the content selections and then start the sync only when I'm ready.
    tt2

  • HT1386 I broke my ipod, went to the apple store and replaced it. but now i can't sync it to my computer. How can would i be able to sync it?

    I broke my ipod, went to the apple store and replaced it. But now i can't sync my new ipod  to my computer.
    How can would i be able to sync it?

    See:
    iOS: Device not recognized in iTunes for Windows
    You may have to update iTunes on your computer. The latestest is version 10.6

  • Can any one suggest me how can I use relative path inside SSIS pacakge to access config file ?

    Can any one suggest me how can I use relative path inside SSIS pacakge to access config file ? Please help me as its urgent.THanks for your help in advance.

    Hi Jay,
    SSIS can only recognize the absolute path of a XML Configuration file, the relative path is not supported. Furthermore, if the XML Configuration file is already generated, we can use the Environment variable package configuration type instead so that
    SSIS runtime automatically looks for the configuration file from the path defined in the environment variable. This is convenient when we need to deploy a package to different environment. We only need to define the environment variable for package configurations
    once on each server, and then the variable can be used by all the packages on this server.
    Regards,
    Mike Yin
    TechNet Community Support

  • Can we define search paths for an SQR ( just like -i for SQC )

    Is it possible to define search paths for an SQR ?
    Ie at run time, we would like the system to look for the SQR in c:\sqr1\ if not found then look in c:\sqr2\ and so on .. until c:\sqr4\
    Right now this feature exists ONLY for the SQC via the -i flag
    ( ex: c:\ps_home\bin\sqr\ora\BINW\sqrw.exe c:\xrfwin.sqr -ic:\sqr1\;c:\sqr2;c:\sqr3;c:\sqr4\ )
    We would like to be able to do it VIA:
    1) The process Scheduler. ( Where do we set it up ? in PSPRCS.CFG ? Not sure how )
    2) Command line. ( We can't find any flag that could satisfy this need )
    Note: We heard about a few hints ( SQRPATH, psprcs file, @FILE flag, PSSQR ) but not able get any of them cleared out.
    This is delaying our development and it's quite crucial for us.
    Any thoughts or hints would be VERY APPRECIATED !!
    Thanks

    Kelvin wrote:
    1) The process Scheduler. ( Where do we set it up ? in PSPRCS.CFG ? Not sure how )From the link below, do a search for "SQR Section" and you'll find PSSQR1, PSSQR2, PSSQR3 and PSSQR4 for sqr search paths
    http://docs.oracle.com/cd/E28394_01/pt852pbh1/eng/psbooks/tprs/book.htm?File=tprs/htm/tprs16.htm#H3002
    2) Command line. ( We can't find any flag that could satisfy this need )I'm not aware of any equivalent for cmd line, but most of the time you know where it has been stored when running it manually. You could get more in the Peoplebooks :
    http://docs.oracle.com/cd/E28394_01/pt852pbh1/eng/psbooks/tsql/book.htm?File=tsql/htm/tsql08.htm#H3019
    If you don't find anything and the cmd line is really needed, you could probably write your own script (ie .bat or .cmd) looking for the sqr which you could give as a parameter.
    Nicolas.
    Edited by: N Gasparotto on May 24, 2012 10:10 PM

  • How can I define Double Click Processing in SAP Query ?

    The first question is : How Can I define drill-down for SAP Query report ?
    The second one :  How can I program Double Click in SAP Query report for Different columns like ALV Grid processing ?

    you can attach a repot or at tcode etc in an SAP query using report assignment in SQ01 but as far as i remember you cannot attach multiple reports.
    regards,
    khusro habib

  • How can I script moving paths from one file to another?

    Hello. I have 1 image with various color correction layers. The other is the exact same size but only contains paths. How can I script moving paths from one file to another? Thanks, in advance, for any help you can offer. Thanks!

    Thanks! This one actually worked for me. Thanks for your help.
    http://forums.adobe.com/message/3305389#3305389

  • How can I stop music and movies from being automatically deleted from my phone and saved on the cloud? I've just tried to watch a movie on my 2 hour commute, but yet AGAIN it has been removed. I do NOT want to spank all of my data allowance

    How can I stop music and movies from being automatically deleted from my phone and saved on the cloud? I've just tried to watch a movie on my 2 hour commute, but yet AGAIN it has been removed. I do NOT want to spank all of my data allowance downloading it again, especially because (believe it or not) I added it to my phone because that's precisely where I wanted it!! Any help much appreciated

    FYI I had to put this link into firefox to reply - because **** back safari just wouldn't register my clicks to any of the links on the post... Despite reloadeing and even restarting my computer. Totally annoying and a massive pain in the ***.
    But in terms of my initial query; thanks for responding. But no, this is NOT the cause of the problem. I have auto sync and sync over wifi activated, but have also selected manually manage music and videos. Plus, all of my music and videos are on my macbook, absolutely all of it, so if it my phone was syncing with my macbook everything would still be on the phone. Life would be peachy if my phone jsut copied everything that was on my macbook, but unfortuantely it keeps deleting tracks for no apparent reason.
    Any thoughts greatly welcomed, because at the moment i can only conclude that my iphone is crap.

  • I'd like to know how can i connect my old iMac tiger with new one iMac lion. I wanna use the old one for external disk to collect files from there to new one.

    I'd like to know how can i connect my old iMac tiger with new one iMac lion. I wanna use the old one for external disk to collect files from there to new one.

    Hi mshields1162,
    Great question, and welcome to Apple Support Communities.
    First, you may want to choose to have the sidebar displayed for familiarity:
    iTunes 11: Frequently used features
    http://support.apple.com/kb/HT5649
    Afterwards, your device should be displayed if connected:
    We'll want to click on it, and choose the Music tab at the top. Let's make sure "Sync Music" is checked:
    Afterwards, you'll have the option to sync either the entire music library (for your first iPod), or "Selected playlists, artists, albums, and genres" (for the secondary device). Upon selecting this option, four larger option boxes will appear allowing you to pick and choose what content will be synced. For audiobooks, you may need to do the above in the "Books" section. For a visual instruction on how to do this, see the following:
    iTunes 10: Sync to your iPod
    http://support.apple.com/kb/VI72
    Thanks,
    Matt M.

Maybe you are looking for

  • Can't Update or connect to Mac App Store !

    Hey Guys, I have the following Problem, i can't use the software update function anymore, because it always says: Software Update can't search for updates because of a Problem. It can't connect to the update server. When i use the network diagnose it

  • NEED HELP Connecting To Mac At Office Using ARD 3

    I have a MacBook Pro that I would like to leave at my office without having to bring it home every night. I installed ARD 3 on my admin computer (my mac mini) at home. I have also installed the client software on my laptop at work. I have all of the

  • ALV Grid Display in Loop.

    Hello experts, I need your help to resolve the issue. I have made a report: On selection screen, Release group and release strategy is taken in select options: SELECT-OPTIONS : S_FRGGR FOR T16FS-FRGGR,                                S_FRGSX FOR T16FS

  • More proof Contribute is not important to Adobe

    Let's say someone wants to align an image to the left and wrap some paragraph text around it. You insert the image, right-click on it and choose Align > Left. The problem is that the text is now flush with the image. We need some padding here. So you

  • Settings changed

    I accessed my ff browser today and all my browser settings were changed. I did not manual change any of my browser settings. Should I be concerned about a virus or is there something wrong with your software. Please advise me.