How can I delete a Data Transfer Process DTP ?

I'm trying to delete a backup cube I don't need any more. I get message "InfoProvider xxx is being used externally". It tells me its being used by DTP_4JI7IPQWI6F7IY1O3H0D6RGYM. I can't find this DTP in Modeling, but it does exist when I look in the Metadata Repository. I can see it in table RSBKDTPSTAT where field OBJSTAT = INA and field ACTIVFL = X - which I think indicates there is a problem. It also exists on table RSBKDTPTH. Can anybody tell me how to delete it so that I can delete the cube eg is there a program that can do it? Thanks, Brigitte

The DTP in question may have been hidden from viewing due to some failed transport.
You might have to locate that DTP in your dev system and transport it to production again and then delete in dev system and transport the deletion to production again.
MP.

Similar Messages

How can we delete the data in e-fact table.

how can we delete the data in e-fact table.

hii,
You cannot delete the request individually but you can one of the following:
1. Do a selective deletion from the cube. RSA1 -> Cube -> Contents -> selective deletion.
2. Delete all the data in the cube and then reconstruct only the required request ids. This would work only if you have the PSA available for all the requests.
3. Reverse posting is another possibility.
hope it helps,
partha

How can I delete old data in citadel

How can I delete old data from Citadel so that HDD is not full when data is continously being logged in the database ?

Hi there,
I could see different possible ways to limit the database size on a LabVIEW DSC system.
a) You could limit the lifespan of your logged data to a certain time by adjusting the option 'Days to keep historical data' in the Tag Configuration Editor>Configure>Historical... tab.
b) You could use the Citadel Database VIs. Archive Database.vi would allow you to archive a database or a part (certain traces/tags, or certain time interval) to another location. With the archive option 'destructive', it would delete the source of the data from the original database.
Delete Traces.vi would delete a traces from a database.
c) The same/similar functionality you can have throught the Measurement and Automation Explorer and its Historical Data Viewer plug-in
b) and c) are NEW features of LabVIEW DSC 6.1!
Hope this helps
Roland
PS: There is a nice link about archiving Citadel on ni.com :
http://zone.ni.com/devzone/conceptd.nsf/webmain/2F24997EAD7C53A686256B6E00686D64?opendocument&node=DZ52101_US

HI, I need your help. How can I delete all data, when I do not have the special security code, which I didn´t remember ? I also think, that I never create this code before. But I cannot put my settings back.

HI, I need your help. How can I delete all data, when I do not have the special security code, which I didn´t remember ? I also think, that I never create this code before. But I cannot put my settings back.

You must remember the code, if you can't then take the phone and proof of purchase to an Apple Store.

How can i delete app data on iPhone without uninstalling the app?

How can i delete app data on iPhone 4 without removing the application. Facebook application size -57mb. And its app data is 70mb

This is ridiculous!
Imagine this scenario, can't be that unlikely:
I'm going away on holiday, or away on work for a while, and I'm not taking the computer to which I sync my phone. Before I leave I fill my iPhone up with music to take with me. While I'm travelling I want to install a new app, but I don't have space. I look to delete content from the phone - I can delete podcasts but not music. Unfortunately I don't have enough podcasts to free up space that way. So I don't purchase the app I wanted.
This is bad for:
1. The user (me)
2. The app developer - lost download.
3. Apple - they lose their cut of the app download, and royally p#@* off a user.
Can someone explain to me why this limitation is good for anyone?!

Error in Data Transfer Process (DTP) Urgent!

Hi,
ive encountered an error in uploading data from R3 using DTP in a specific cube and it says "Exceptions in Subset: Load and Generation" and "Dump: ABAP/4 processor: MESSAGE_TYPE_X", how can i fix this problem? is there any problem with the upgrade process of our system or in KERNEL? and what is KERNEL? Please help me guys.....
Thanks,
nips

Please do not post the same question twice.
Error in Data Transfer Process (DTP) Urgent!

I Lost my iphone how can i delete my data as i have my icloud account on it please Help me ?

Please help me , How can i delete my icloud account on my Lost iphone 4

Use Find My iPhone. Log in to your iCloud account at the iCloud website (or from another iOS device that has the FmF app installed). Click on ERASE IPHONE.
A couple of observations:
1).Find my iPhone has to be eabled BEFORE the phone was lost.
2).Once you ERASE the data on the phone you will no laonger be able to track it.
3).If someone has found the phone the iPhone, erased it and set it up as a new iPhone, you will also be unable to track it and erase it.
Good luck.

How can I delete some data so I can back my iPhone up to the icloud

I want to back my iPhone up to the icloud. How can I delete some data

DO NOT start iTunes. Connect your phone to a computer and then access the photo folder, should be the only folder that will appear when you access your phone through the file explorer. You are looking for the DCIM folder. Open it and then either copy the photos to a folder on your computer if you want to save them. Then you can delete them from your phone.
Or you can simply go into Pictures, Open the folder you want to empty out, Tap Select, Tap the pictures (Sorry but you have to touch each one) and then tap the trash can.
And remember that if anyone has messaged you a picture it will be in Messages and also taking up room.

How can i delete PSA data in BI 7.0

Hi all,
you know in BW 3.5, Modeling - PSA - right click in PSA - delete PSA data, you can program how often you want to delete de data of the PSA , Example: 2 Days or from some date or a selective data request, now in my client we are now in BI 7.0, i find the PSA but i can get to this option that i had in BW 3.5, can you help me to find it, step by step please,
Jorge Ayllon

Hi,
Pls Goto Datasource Tab in RSA1 - You can see PSA on the top click that you will have the PSA requests there click on it and delete.
IF you want , use a process chain just as an addition information:
You have a process type - Delete PSA request
Please go thro' the link below:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_whm/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d393236323035%7d
Regards
CSM Reddy

How can I check the data transfer rate of my FW800 port

I have an iMac 2.4 20 inch (MB323LL/A) with a Lacie external rugged hard drive (320 GB). I have attached it using my FW800 port with the cable supplied with the drive.
It seems slow to me so I was wondering if there is any way to see what the current data transfer is for a backup in progress. Of course it should be 800Mbps but is it really moving at that speed ? How can I tell what speed it is transferring at ? Can I use the same method for USB ports too ?

When you move a large file, you are more likely to see a sustained transfer rate than a small file. Small files have to be individually read/write back and forth, thus slows the actual transfer rate down. If you are moving any file up to 4 GB and probably over 1 MB you'll see more realistic transfer rates. Furthermore your hard drive access time, and RPM figures into the equation too, as well as how much RAM you have. 800Mbps works out to 100 Megabytes per second under ideal conditions.

How can I delete the data?

Situation:
We have loaded the billing and posted DR transaction data for some days
to BW. But now we found that the data what we get is not correct, it is
because the program in R/3 which used to get the data is wrong. So now
we correct the program.
My question is,
How should we do for the previous loaded data in BW? Because this is
transaction data, it is delta load. Can we delete them and re-load
again? And the problem is, we have two country's data, and only one country's data is wrong. And only the data after 7/9/2007 is wrong, before 7/9/2007 the data is correct.
Please give us instructions. Thanks.
Regards,
Lena

You can do this by two ways:
1. You can delete the whole target data and schedule a full repair request by creating a new package with update mode as FULL and check the FULL REPAIR check box (scheduler-->Repair Full Request). In that your whole new data will be loaded again, as you have already intialized your target.
2. Yoo also have a selective deletion option in your target. Go to manage>contents>selective-->delete selections. In that give whichever data you want to delete as per your requirement. After deleting you can again reload data by creating the repair full request as per the procedure in point 1, but with only required selections.
I think this may help you out.
Thanks and Regards.

Large mail box (87GB total) how can I delete the data?

I have a mail box that has a total of 87GB of data. The content is no longer needed. How do I delete the content but not the mail box?

In Exchange 2007 you need to use Export-Mailbox ex:
export-mailbox -id <username> -deletecontent -confirm:$false
Ratish Nair (aka MSExchangeGuru) has a great article on this topic:
Delete emails from mailboxes – Exchange 2007
Keep in mind that to run the Export-Mailbox cmdlet, the account you use must be delegated the following:
Exchange Server Administrator role and local Administrators group for the target server
Full access to the source mailbox
Export-Mailbox Addition Information

On my 3GS, in Settings, under About, in Diagnostics and Usage, go into Data and see how gigantic the storage is. How can I delete this data? 5.0

How do you delete the usage data in Diagnostics and Usage?
It just keeps piling up. There is an option to send this data to Apple but I don't and have no intention of doing so.
I just want to delete the data.
How do I do this please?
Thank-you.

What I've done now is moved my music folder into a different folder to keep it safe, I've deleted my iTunes library, ie on itunes highlighted all and deleted. Then gone to iTunes media folder and checked they are deleted and they are. Now whatever done is put my music folder back and checked preferences and it says keep a copy of file in iTunes etc. also keep folder organised is on.
So now I have started afresh I have both my music folder and iTunes folder which hold the same songs.
So what do you recommend I should do to be able to delete the music folder and just have one folder of songs?
Thank you

How can I delete autofill data on my Firefox 4?

I am using '''Firefox 4''' and I want to delete my ''autofill'' data but I didn't found any option for deleting ''autofill'' data. So please anyone tell me that how to delete ''autofill'' data.

This HIDES existing autofill data and stop collection of new data, but doesn't remove anything already collected. Rechecking the box will display all the autofill data already gathered.
'''Tools>Clear Recent History'''... Show '''Details''' section, check '''Form & Search History''', click '''OK''' will delete collected data.

How can i delete keychain data for all users on my Mac Server?

We have 2 Mac servers on our windows network and user passwords change every 30 days to keep up with security. How can i stop keychain asking for the users old passwords or get it to update with the change of password?

Hello,
First you have to create a new folder or 2/3, om My Mac... Mail>Mailbox>New Mailbox...> Loacation>On My Mac.
Highlight the eMails & drag to the new box(es), if IMAP Mail will try downlodaing them again.
If POP & Remove fron Server when downloaded it won't.
Quit Mail after the move, log into gMail Webmail via a browser & delete what you wish.
PS. Even though you delete everything in gMail, google keeps copies for themselves & the NSA, just you cannot see them.

How can I delete a Data Transfer Process DTP ?

Similar Messages

Maybe you are looking for