How can I delete ALL of my junk mail at the same time?

Hello I need some help!
I could not check my e-mail for a week and now I have nearly 600 junk mail on my mail box.
I am too busy to delete the junk mail one by one.
Mac wizard, please tell me how to delete all the junk mail at once!

Not certain, but this can fix myriad Mail problems...
Safe Boot from the HD, (holding Shift key down at bootup),  it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move this folder & file to the Desktop.
Move this Folder to the Desktop...
/Users/YourUserName/Library/Caches/Mail/
Move this file to the Desktop...
/Users/YourUserName/Library/Mail/Envelope Index
Reboot.
If that doesn't do it and you can afford to redo all your Rules, try these & reboot...
/Users/YourUserName/Library/Mail/MessageRules.plist
/Users/YourUserName/Library/Mail/MessageRules.plist.backup
Note, in 10.5 & up /Users/YourUserName/Library/Caches/Mail/ may or may not exist.

Similar Messages

  • How can i delete all songs on my ipad at the same time?

    How can I delete all songs on my ipad at the same time without affecting my library on itunes?

    Use IMAP Mail e.g. Gmail

  • How can I delete email from iPhone and ipad at the same time

    How can I delete emails on my iPhone and ipad at the same time

    Use IMAP Mail e.g. Gmail

  • How can i Delete all foto from my iphone and after some time get them one more time on it but not as a new album :)?

    How can i Delete all foto from my iphone and after some time get them one more time on it but not as a new album, i want them in the camera roll ?

    How can I delete EVERY THING off my Mac and have it like new?
    Boot from the software install DVD and do an "erase and install" when prompted.

  • How can I do to acquire and save date in the same time and in the same file when I run continual my VI without interrupti​on.

    I've attached a VI that I am using to acquire amplitude from Spectrum analyzerse. I tried to connect amplitude ouput to the VI Write Characters To File.vi and Write to Spreadsheet File.vi. Unfortunately when I run continual this VI without interruption, labview ask me many time to enter a new file name to save a new value.
    So, How can I do to aquire and save date in the same time and in the same file when I run continual my VI for example during 10 min.
    Thank you in advance.
    Regards,
    Attachments:
    HP8563E_Query_Amplitude.vi ‏37 KB

    Hi,
    Your VI does work perfectly. Unfortunately this not what I want to do. I've made error in my last comment. I am so sorry for this.
    So I explain to you again what I want to do exactly. I want to acquire amplitude along road by my vehicle. I want to use wheel signal coming from vehicle to measure distance along road. Then I acquire 1 amplitude each 60 inches from spectrum analyzer.
    I acquire from PC parallel port a coded wheel signal coming from vehicle (each period of the signal corresponds to 12 Inches). Figure attached shows the numeric signal coming from vehicle, and the corresponding values “120” and “88” that I can read from In Port vi.
    So I want to acquire 1 time amplitude from spectrum analyser each 5
    period of the signal that I am acquiring from parallel port.
    So fist I have to find how can I count the number of period from reading the values “120” and “88” that I am acquiring from In Port (I don’t know the way to count a number of period from reading values “120” and “88”).
    Here is a new algorithm.
    1) i=0 (counter: number of period)
    2) I read value from In Port
    3) If I acquire a period
    i= i+1 (another period)
    4) If i is multiple of 5 (If I read 5 period)
    acquire 1 time amplitude and write to the same
    file this amplitude and the corresponding distance
    Distance = 12*i). Remember each period of signal
    Corresponds to 12 Inches).i has to take these
    values: 5,10,15,20,25,35,40,45,50,55,60............
    5) Back to 2 if not stop.
    Thank you very much for helping me.
    Regards,
    Attachments:
    Acquire_Amplitude_00.vi ‏59 KB
    Figure_Algorithm.doc ‏26 KB

  • How can i use both Windows and Mac os at the same time on my iMac

    How can i use both Windows and Mac os at the same time on my iMac

    You can use Parallels desktop or VM Fusion to run both operating systems at the same time. Both programs work well, but I personally perfer VM Fusion.

  • I have an iphone 4 how can I delete all my junk mail at the same time without having to selct each maessage

    How do i delete or empty all the messages in my junk email at the same time without having to mark each message?

    Not certain, but this can fix myriad Mail problems...
    Safe Boot from the HD, (holding Shift key down at bootup),  it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move this folder & file to the Desktop.
    Move this Folder to the Desktop...
    /Users/YourUserName/Library/Caches/Mail/
    Move this file to the Desktop...
    /Users/YourUserName/Library/Mail/Envelope Index
    Reboot.
    If that doesn't do it and you can afford to redo all your Rules, try these & reboot...
    /Users/YourUserName/Library/Mail/MessageRules.plist
    /Users/YourUserName/Library/Mail/MessageRules.plist.backup
    Note, in 10.5 & up /Users/YourUserName/Library/Caches/Mail/ may or may not exist.

  • How can I install one app on multiple iPads at the same time?

    We have a volume purchasing account, but when purchasing an app we get multiple serial numbers that all seem to need to be entered individually. The iPhone config Utility will not sync multiple iPads at the same time. Am I missing something? This cannot be the method for mass deployment, it seem too complicated.

    You can do a  backup of you iPad then restore the backup to many devices.
    How to use multiple iPods, iPads, or iPhones with one computer
    http://support.apple.com/kb/HT1495
    Mobile Device Management Solutions for iOS
    http://www.apple.com/iphone/business/integration/mdm/
    http://www.apple.com/ipad/business/resources/
    "iOS mobile device management (MDM)
    With an unmatched breadth of features, a Self Service console forover-the-air (OTA) distribution of in-house and app store apps, and integration with Apple's Volume Purchase Plan (VPP), the Casper Suiteallows administrators to easily achieve the four major tenets of iOSmobile device management: Inventory, Configuration, Security Management, and App Distribution."
    http://jamfsoftware.com/products/casper-suite/

  • How can I record a microphone and software instrument at the same time in Garageband 10.0.1?  It seems I can record one or the other, but not both at the same time?

    I am trying to record a vocal mic and a keyboard (using a software instrument) at the same time using Garageband 10.0.1.  It seems that I can't record the mic input and the software instrument at the same time.  I can record the mic input by itself, and I can record the software instrument by itself (if I don't have a mic input track created), but I can't record them together.
    It seems like this should be an obvious thing to be able to do, but I can't figure out how to make it work.
    Can someone help?
    Thanks,
    Kurt

    Kurt1997 wrote:
    I am trying to record a vocal mic and a keyboard (using a software instrument) at the same time using Garageband 10.0.1.
    you need to "record enable" both tracks:
    http://www.bulletsandbones.com/GB/GBFAQ.html#multitrackrecordinggbv10
    This FAQ entry offers a Minute GarageBand video tutorial
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • How can one share iTunes Library across two machines at the same time?

    **I have setup 1 of 2 machines to host all the songs in my iTunes library. I then went to machine 2 of 2 and held down option key on start up of iTUnes, changed the location of the liobrary on machine 2 to a shared folder on machine 1.**
    **This works awesome and I can use itunes on each of the machines 1 and 2 with no duplicate library in my home.**
    **Problem: I can only run one machine at a time. I can not run itunes on both machines at the same time. The error message from machine 2 is ITUNES library is locked and cant write to the folder. iTunes works correct if I QUIT iTunes on machine 1.**
    **Can iTunes run at the same time on 2 machines and access the same library?**
    *Thank You Troy*

    Troy Yoho wrote:
    Can iTunes run at the same time on 2 machines and access the same library?
    in a way, yes.
    set up _*Home Sharing*_ on both machines.
    JGG

  • How can i run multiple instances of Photoshop EXE at the same time on windows 7

    Alright. You may ask why do you need multiple ?
    Assume that i have 10000 PSD files in 10 different folders
    I have a script that just save as them as PNG
    And these files are each 3000x3000 px
    My computer has 8 cores and 1 photoshop exe is only using 1 cpu core
    Also i have SSD raid system it has 750 mb read write per second
    So right now i am wasting my time with running only 1 photoshop exe instead of at least 4

    I'm not aware of a way to run multiple instances or different versions of photoshop at the same time on windows.
    Assuming of course they are all installed on the same operating system.
    On mac versions you can running two different versions of photoshop at the same time, but i don't think that's possible on windows where it
    appears that only one version of photoshop can run at a time.

  • How can I connect to Oracle and SQL server at the same time?

    I have been trying to find a way to connect to Oracle Database through the developer 2000 and SQL server at the same time. I need to return some data from Oracle Database and some from the Sql Server Database. And update both through SQL. I find there is such a thing as the Oracle Transparent Gateway for SQL server. I can't find it on any of my CD's or through OTN downloadable files. If anyone can point me where to get this. Or tell of another way this can be accomplished I would appreciate it. TIA.
    [email protected]

    I have been trying to find a way to connect to Oracle Database through the developer 2000 and SQL server at the same time. I need to return some data from Oracle Database and some from the Sql Server Database. And update both through SQL. I find there is such a thing as the Oracle Transparent Gateway for SQL server. I can't find it on any of my CD's or through OTN downloadable files. If anyone can point me where to get this. Or tell of another way this can be accomplished I would appreciate it. TIA.
    [email protected]
    As far as I know you have 3 options depending on your specifications. I don't think option #3 will work if you need to actually join a
    SQL Server table to an Oracle table.
    1. Oracle Transparent Gateway. I haven't used the Oracle Transparent Gateway but my understanding is that Oracle gateways are
    separate purchased products from Oracle. I've never seen any free/development versions of it anywhere. You'll need to contact
    your Oracle sales rep about it.
    2. Heterogeneous Connectivity. There's something called Heterogeneous Connectivity that could work for you - depends on what
    version of Oracle you're on and what OS. You basically set up an ODBC data source on the Oracle server and modify the listener.ora
    and tnsnames.ora files. You can then create a database link to SQL Server just like you would to any other Oracle database. You can
    check your Oracle documentation for how this works. There's also some very good documents on Metalink that tell you how to do this
    as well as a Heterogeneous Connectivity forum on this site.
    3. Use the exec_sql package available in Developer 2000. This allows you to open and execute cursors to remote databases within
    Developer. We have an account validation process that uses this - when a person enters an account number in a form while logged
    into Oracle it validates the account is valid in our main accounting DB2 database. We also pull HR information from DB2 into Oracle
    this way. If you're using Forms 6i exec_sql is a built-in command, in Forms 5.0 and 5.5 you have to add it as an attached library to
    the form. I think you also need the OCA options installed from the Developer software to have access to the library in Forms 5.0 and
    5.5. The library will be in the $ORACLE_HOME\oca20\plsqllib directory for these versions. The Developer documentation should have
    additional information.
    HTH

  • How do i delete sections of video and audio at the same time

    hello, i made a video with sound and overlapping voiceover i want to know how do i delete a section of the video and the voice over without having to resynch everything again?

    In Final Cut Pro X, this is easy. You drag to select all these clips. Then use the Blade Tool.
    However, in iMovie, it is not as straightforward. You can edit the camcorder clip and its audio, but any music tracks, voiceover tracks, etc. will not be edited with it.
    A workaround is to use the SHARE menu to SHARE/EXPORT TO QUICKTIME using Apple Intermediate Codec to retain as much quality as possible. Then import this new movie into an Event. New all the audio is married to the video and you can edit everything together.

  • How can you view what your cropping on FCE at the same time as cropping....

    I need to crop a clip however don't know how to work the 'sliders'. How can i preview what i am cropping as i am doing it?
    Many thanks,
    Ed

    Put the clip into the timeline. Put the playhead over the clip. Double click the clip in the timeline. In the Motion tab adjust the sliders. Or use the Crop tool in the Canvas with the View popup set to Image+Wireframe.

  • How can I offset all elements of an array by the same number

    I'd like to know the quickest way to add a number to all elements of an array. In other word, offset the whole array by a number.

    You just use the normal add function. Wire the array to one input and the constant to the other input. After wiring the array, do not click on the other terminal and select Create>Constant because by default it will create an array. Just select a Numeric Constant from the Numeric palette or wire it to a control.
    Attachments:
    add_constant_to_array.jpg ‏3 KB

Maybe you are looking for