How can I delete iTunes U files which wont delete

I downloaded iTunes U app and downloaded some content, but before the downloads were complete, it crashed and does not work - possibly due to slow internet speeds rather than early iOS 5 issues. The files I downloaded are still in the iTunes U section of the Music app as well as the Videos app. When I tap them, it says 'unable to play movie' ... because its not a complete file probably. I tried swipping to delete them, which didnt work. When I plug my phone into iTunes the files dont show up. I reset the phone, still didnt work. Any ideas as to how I can delete these files?

1. Go to App folder, doubleclick iTunes / Get info
2. Unlock Sharing & Permissions section and change Everyone state to Read & Write
3. Archive iTunes to zip and delete the just the iTunes.app itself (without touching additional files (if you use Appcleaner for example))
Use this algorhytm with any native locked app.
Enjoy!

Similar Messages

I wrote a assignment in the microsoft word 97-2003 doc but by mistake replace in the same name but with different thing . how can i retain my orinal file which was as Basel III and Banking law

i wrote a assignment of almost 2500 words in the microsoft word 97-2003 doc but by mistake replace a table only in same name . how can i retain my orinal file which was as Basel III and Banking law

Hey Christian
Thanks I havn't seen that post, busy trying it now but no luck so far.
I defined it in the second one (Content Management - Utilities - MIME Types).
Tried it now in NWA, no luck either . . .
What I noticed is no matted what it is defined as in NWA or Content Management, the properties of the mht file still shows Binary File (application/octet-stream)
Any ideas?
Regards
Antonette

I downloaded new Firefox but now can't open Firefox at all. It says it is not supported on my system. How can I get the earlier version which I deleted?

I downloaded new Firefox but now can't open Firefox at all. It says it is not supported on my system. How can I get the earlier version which I deleted?

http://www.mozilla.com/en-US/firefox/4.0/system-requirements/ <br />
Mac
Operating Systems
* Mac OS X 10.5
* Mac OS X 10.6
Recommended Hardware
* Macintosh computer with an Intel x86 processor
* 512 MB of RAM
* 200 MB hard drive space
For older Macs that aren't supported in Firefox 4.0, try TenFourFox for PowerPC's running Mac 10.4.11 & 10.5.8 . <br />
http://www.floodgap.com/software/tenfourfox/

How can i display a image file which is placed in the applications server

Hi all,
Can any one help me how can I display a image file which is present in the application server.
With regards,
M.Ramana Murthy

hi,
*& Form TOP_OF_PAGE
* text
FORM F_TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = IT_LISTHEADER
i_logo = Logo name
* I_END_OF_LIST_GRID =
ENDFORM. "TOP_OF_PAGE
rgds
Anver

How can I burn "iTunes store files in MP3 formats?

how can I burn "iTunes store files in MP3 formats? is there a way ?

I typed "MP3" into the help feature in itunes and found "Create your own MP3 CDs"
Try the same.

How can i recover old sms messages which were deleted about a week ago?

How can I recover older sms messages which were deleted about a week ago? I have tried some software but it only recovers messages from the date deleted not prior.

You Can't
sorry Once Deleted
forever Deleted

How can i get my pictures back, which were deleted because my ipod recovered.

Hello,
I wanted to put some music on my ipod. After removing my ipod from the computer, i checked the pictures. I saw i lost my 400 pictures, which i made in vietnam. Is there any way i can recover the pictures. I already tried restoring the pictures. All thensetting were the same, but my pictures didn't show up.
I am using iTunes for windows (version 10.5) and my ipod is version 5.1.1
I hope you can help me,
Matthijs Bles

If you ever ran a backup of your iPod to your Mac, you can use this app - it is a LIFESAVER!
http://picturescueapp.com/
Before you buy it, you can download it for free and scan your past iPod backups to see if your pictures are there.
Also, if you run Time Machine on your Mac, you will have older iPod backups there, so you can pull up the backup file from a Time Machine backup, and then open it up with PictuRescue.
Good luck!

How can I run a sequence file which is stored as BLOB

Hallo,
I' using (or better will use) TestStand 3.1 and a ORACLE database. Is there a way to load and execute sequence files which are not stored on the filesystem but as BLOBs in the ORACLE DB. The choice which sequence has to be executed is done dynamically within a custom built process model. A certain sequencefile should be loaded and started by referencing it not by filename but with the PrimaryKey of the table.
I don't know if this would be a certain capability implemented in TestStand or in ORACLE. It could be something like mapping a BLOB into the Filesystem and pretend that the file is present on the filesystem, something like that!
Any ideas are highly appreciated
Thanks
Oliver Friedrich

Oliver -
TestStand does not have any hooks to allow a test system developer to override the internal searching for a file on disk. The only simple option that I see is to to query the database and download the latest sequences ahead of time. This is similar to a Source Code Control mechanism. Keep in mind that once an execution loads a sequence file, the file is typically not released until the last execution completes so you cannot load an updated copy of the sequence file while executing, especially the client sequence file.
Scott Richardson
National Instruments

How can I stop iTunes adding apps I've deleted onto my phone?

I have an iPhone 4 which is fully updated and I'm using iTunes 10.4.0.80 (although this has been a problem with previous versions as well) on Windows 7.
When I try to sync my phone to my computer it tries to install all the apps I've installed and deleted from my phone since I last synced. I've only got a 16GB phone and I tend to install and delete apps regularly, so this fills up any available space and prevents me from syncing what I wanted to sync to my phone in the first place. The check box for "automatically sync new apps" is unchecked. I can (and at the moment, I have to) go through the list and uncheck every app that iTunes has checked for me, but with over 1000 apps backed up on my iTunes this is extremely tedious, and given that iTunes runs extremely slowly on my computer it often takes me more than 4 hours to do. It is slightly quicker to uncheck and recheck sync apps, then manually add back all the apps I want to keep, but I still have to (still extremely slowly) scroll through the list to add back in the same set of apps each time. Even if I could use the phone display on the right hand side of the screen to delete the new apps it would be easier, but no matter what I do to the display, if I don't uncheck them in the list they just get added back on again anyway.
Is there a way around this or am I stuck devoting hours to syncing my phone every time I want to move stuff between my computer and my phone?

Starting when iOS 7 was released, Apple now allows downloading the last compatible version of some apps (iOS 4.2.1 and later only)
App Store: Downloading Older Versions of Apps on iOS - Apple Club
App Store: Install the latest compatible version of an app
You first have to download the non-compatible version on your computer. Then when you try to purchase the version on your iPod you will be offered a compatible version if one exists.

How can I fix itunes music file's permissions

I decided to import all my cds again at a higher bit rate. When importing a cd into itunes that I currently have in the library, itunes will ask me if I want to replace the existing files. To this i say yes, It prevents my library files from loosing the play count. After a couple of cds I realized that the old files weren't being moved to the trash as they should. So I had 2 songs of each cd in their folders. When trying to move the old files into the trash manually, the system asks me to "type my password to allow the finder to make changes". Looking a bit into it I realized that the permissions are wrong. On each music file I have the following in this order:
everyone Custom
User (Me) Read & Write
everyone Read only
The artist's folders and the album's folders permissions are:
User (Me) Read & Write
everyone Read only
I checked all other files in itunes and the potcasts have the same permissions as my music files but all other (tv shows, movies, apps) have what I think are the correct permissions:
User (Me) Read & Write
staff Read only
everyone Read only
When I go into a specific music file's info I can't delete the "everyone:Custom" permission line. I can only add an administrator on the list. I fixed the permissions from the installation cd using disk utility but it didn't do anything. I'm able to play all files without problems, as well as my apple tv and my iphone. I can't think of anything else to fix the issue. Any help before I call apple would be appreciated. Thanks
~Ralph

in finder, right-click on the iTunes folder and +get info+. unlock the little padlock (you may have to enter your admin password) and adjust the permission settings. next, click on the little gear-shaped icon and +apply to enclosed items+ like so
you may also give everyone read & write access. if this doesn't help, try the same on your iTunes folder (not just the iTunes music folder).
JGG

How can you tell FCPX project files in a deleted trash recovery program

Hello All
Did the unthinkable and trashed a FCPX project folder I need.....and emptied the trash.
I immediatly went into recovery with program ''Stellar Phoenix...'' and was able to recover loads of files.
Since they are now ''generic'' labeled, I can't decifer which one is the FCPX project file.
Does anyone have a method to determine which is which in a recovery situation.
Some further info....
     recovered files are organized in folders by types:
               OSX 10.6
               graphics
               documents
               apps......sub folders to include: ''c source...plist....apple scripts....etc
               video
               audio
               archive
               and a few more..
It seems apparent that it's not going to be video,audio. graphics...etc
but I was thinking ''apple scripts'' as a project is just instructions for the timeline movie, right?
anyway, have a lot of searching to do and no real map on what I'm looking at here.
Anyone had an experience like this and can shed some light?
...greatly appreciate it
Thanks!

Monty,
Within FCP, there is a menu item called "Media Manager" (depending on what version you are in). This would be worth your while to look into. It basically organizes your project by moving/archiving any used assets of a project and leaving out un-used assets. It saves a ton of disk space.
For example, say you have a 5 minute clip with an in/out point that is just 30 seconds. Media Manager will "archive" just that 30 seconds, not the entire clip. There is even a setting that you can add additional "handles" time to the front andd back of the clip if you think you may need to add or change transition.
Do a google search. I was just watching a few Youtube videos on this myself.
Jonathan

How can I get the lib files which supported jsf?

In one book , That introduce me to get the lib files from a jsf folder ,after you install the jwsdk1.3 ,now ,I installed the 1.5,but I cann't find this jsf folder.where I can get these lib files ? Thanks very much.

Try data rescue or some other program. However, before proceeding turn off TM and avoid that muck up the next time you connect. AFAIK, however, it shouldn't have happened without a dialog box popping up allowing you to not use it for TM.
See Pondini's TM FAQs for more information..

HT1597 How can I STOP iTunes from automatically trying to add podcasts to my iPod when I plug it in and sync it, so I can manage the files? I have already unchecked "Sync Podcasts" and "Automatically include,"yet EVERY time I sync it,it still transfers po

How can I STOP iTunes from automatically trying to add podcasts to my iPod when I plug it in and sync it, so I can manage the files? I have already unchecked "Sync Podcasts" and "Automatically include,"yet EVERY time I sync it,it still transfers podcasts as the last step, and at other times randomly, when trying to just add some MP3's to a playlist, for example. I can't seem to find any other option to uncheck, and can't find an answer from my so-far internet searching.

erict, you blew me away with that suggestion! It was something so simple I couldnt believe I hadnt thought of it! But in the end it didn't work, which I was really surprised about. On Windows anytime anything was moved itunes was hoplessly lost, but on this mac it still kept up with everything. I tried renaming folders, moving folders, and even renaming moved folders but it still kept trying to import.
I even went as far as deleting EVERYTHING i had moved to the Mac, which didnt really work. It still kept trying to import what wasnt there which made it continue to freeze up. However, after doing this it, the freezing was not nearly as bad. It gave me enough of a break to cancel it through the itunes dialog box at the top of the app. So in the end, thats all I really needed to do, only before I had deleted everything the freezing would not allow me to do it.
So now Im reimporting everything again, only slowly, and only a few Artists at a time.

How can I reload (refresh) my files into iTunes

Hello,
My iTunes folder and library is in its default location and I do not want to change my iTunes Library to an external harddrive. I do however have files on an external harddrive, which are also part of my media library in iTunes. Every now and again that drive is disconnected and slowly the covers start to disappear, if I reconnect, then iTunes regards these files as still missing, how can I "refresh" iTunes to check if the files are present, without having to delete the album and dragging the folder back into iTunes, then it work. If I play the file then it works too, but it would take to long to play each file individually to wake up iTunes.
Is there a way to refresh?
Thanks for any and all replies.

I've seen this topic discussed for many years now, and don't think there is a definite method. iTunes only reads files if you really change something about them, otherwise it relies upon what it has in its library database about the track. Things to try:
Grab files in a playlist and start to drag to another playlist, but stop before you do so and just let them bounce back into place.
Play files (you've tried). There's a Dougscript called Needledrop that will just play a file for a few seconds, but still a hassle if you have 10,000 tracks.
Try Dougscript MIA an see if it tickles the files enough to get them to update.
Find some junk field in your files (for example, "show" usually is empty for music files). Get info on a series of files, change the field contents so it re-writes all the files. (Yeah, not ideal.)

How can I get iTUNES library to display renamed files and folders (renamed with Windows Explorer)?

How can I get iTunes library to display the new names and organisation of tracks and albums (ie files and folders) that I have renamed and reorganised (using Windows Explorer) having previously imported them using iTunes?
(Even when I relocate "lost" tracks in iTunes (using the drop down menu facility to view in Windows explorer), although iTunes will then play the track, and knows where to find it, it refuses to display the track with its correct (new) name, or show it the correct (new) album. That means I have lots of things called "Untitled" and "Track 01" etc, all of which have actually been renamed, but iTunes does not seem to have the capability to recognise the changes and update its library listing. Another example - a Tchaikovsky CD with 3 major works in 13 tracks insists on displaying in iTunes as 13 tracks in one album, despite the fact that I have reorganised the tracks into 3 albums - two being Swan Lake and The Nutcracker - and renamed the individual tracks to a more useable format.)

Thanks for your replies ckuan
I agree with Tgod that your first solution does not work. It appears unpredictable whether the old or new file names are listed when you drag the folders into iTunes from Windows Explorer. The folder structure is completely missing. I reckon if you have to muck around spending days/weeks/months finding out how to fix links to a secret meta-file (obviously designed by some deep-cover microsoft worm working in the Apple!), then it's pretty obvious that almost any alternate way of doing this would be better. Bye bye iTunes!!
Incidentally, I tried several other things that (if the software was designed intuitively) should work, but give disastrous results:
1) when deleting the library listing in iTunes, it gives you two options - one is to remove the listings to the Recycler. Be aware that IF you select that option, it removes not only your library listing, but also your ACTUAL MUSIC FILES to the Recycler. Moreover, it does NOT remove the insidious secret meta-file that is what apparently keeps rewriting old names over your carefully renamed file names, and keeps totally ignoring your carefully designed folder (album) structure. OK - not a complete disaster, as I realised and went hunting through the chaos in the Recycler to recover all my files. No thanks to the genius who designed this brilliant feature!
2) after deleting the library listing in iTunes, I attempted to import just the folders that I wanted. iTunes refused to allow me to do that, and proceeded to try to import every frigging music file it could find on my whole hard drive, in apparently random fashion into the library. Whoever thought up that doozy either never ever tried to use or market test it, or has modified their mind rather too many times with artificial substances so their brain is like muesli chop suey.
3) oh why go on, it's too depressing ...

How can I delete iTunes U files which wont delete

Similar Messages

Maybe you are looking for