How can I delete the image in Forms 6i?

How can I delete/clear the image item in Forms 6i which is a database item?
and I want to create a report that print the information if the record has been stored a image. so how can I do that?
Thx~

In forms 6i + , Clear_Item should clear the image from the item. For earlier versions See note 139900.1 on Metalink

Similar Messages

  • How can I delete the image in my e-mails?

    I'm having difficulty deleting or changing the e-mail image that appears automatically in e-mails. I gather they appear on e-mails sent to other Mac Mail uses, but not otherwise. I'd like to simply remove the image. Yet even when I delete the image altogether using the edit image tools in Address Book, one of the stock images from Apple's library keeps showing up. Can I not have the e-mails appear without any image on them. I've poked around a bit with both Address Book and System Preferences, and wonder what the difference is between those two image functions. There are separate images for each user on my iMac, but I'm having difficulty figuring exactly how to manage and control those images in System Preferences and Address Book.
    Can anyone point to Apple documentation that might help me?
    No opinions, please.
    Using

    but cannot see how to simply delete an image.
    As far as I know, there is no way to delete the image. I've not heard of a way to do so. It there is a way, someone may chime in; in the meantime, you might want to try checking out the "more like this" section on the right of the page.
    No opinions means I'm looking for answers based on technical knowledge.
    FWIW,  you do know that these forums are user to user only? Some people here are tech experts and many others extremely knowledgeable, but not necessarily techs. We learn and share what we've learned.

  • How can I delete the image outside of this offset path?

    I'm really new to Illustrator, and I'm trying to print an image that will have a CutContour swatch around it, with a bleed outside of the CutContour line. You'll see that I set up the bleed by creating an offset path outside of the CutContour path. However, I would like to delete the rest of the image outside of that, but I'm not sure how to do this. I don't want to print the entire block of the photograph, just the image inside the tracing, leaving the outside white. I thought I could select the offset path and make a Clipping Mask from that but it says it's "too complex" or doesn't do anything at all. I've attached an example since it will probably make more sense to have something to look at in addition to my explanation...

    If there are a lot of points in the path you are trying to use as a clipping mask, you could try;
    Object > Path > Simplify
    Turn on preview, and play with the settings while watching the shape and number of points.
    --OB

  • How can I read the image from database into form

    hi everyone
    if I have table like this
    create table test
    (id number(10),
    pic long raw);
    in this table record
    in form If I have block non database
    how can i read the image into non database item
    I try with this code but no good
    select pic into :photo from test where id=5;
    photo its non database item kind image
    how can i invoke image into item
    thanks alooooooot

    Hello,
    You can't select image with select query. You need to create another database block from test table which has item binds with database pic column. Now in where condition in test block's property you have to write id=5. Change test block's properties UPDATE ALLOWED, INSERT ALLOWED, DELETE ALLOWED to NO. Only Query allowed property set to YES.
    Now in your particular trigger write the code
    GO_BLOCK('test');
    Execute_Query;
    please mark if it help you or correct
    Regards,
    Danish

  • How can I control the image size when I export form iphoto, the choice is too limited, I need to send a photo under 3 MB but if I choose high quaulity it is only 1.1 and i need to keep the best quaulity I can. Thanks for help.

    How can I control the image size when I export form iphoto, the choice is too limited, I need to send a photo under 3 MB but if I choose high quaulity it is only 1.1 and i need to keep the best quaulity I can. Thanks for help.

    Any image can only be as large as the Original. With a program like Photoshop you can UpRes an image and get it to a bigger size, larger files size as well, but the actual quality of the image will be degraded, depending on the UpRes system and the original quality of the image.
    iPhoto is not the program to be doing that in and I don't think it even has that option.
    So I suspect the image you are trying to send isn't much bigger than what you are getting. You can also try Exporting it from iPhoto to yopur desktop and see what size you end up with. If it is still that 209KB +/- file size then that is the size of the original image.

  • How can I delete the TemporaryTopic using JMS C API or VC++

    Hello everybody,
    how can I delete the TemporaryTopic after created TemporaryTopic using JMS C API "JmsSessionCreateTemporaryTopic"?
    I checked the document about JMS C API, but I couldn't find any API for delete TemporaryTopic, it's really not existing?
    Or if there's any other way that I can delete TemporaryTopic using VC++? Any comments will be appreciated.
    Thanks for your help!
    Youbing he

    As far as I can tell, there's no C-API option for deleting a temporary topic other than to close the connection used to create the temporary topic. Note that it is inefficient to frequently create and destroy temporary topics.
    You can get pretty much equivalent performance and functionality with a shared regular topic, non-durable subscriptions, and selectors that take advantage of the "indexed subscriber" optimization. (Consumers specify a selector that is unique to them in the exact form of "MyUniqueID NOT NULL", while publishers send to a specific consumer by adding "MyUniqueID" as a message property. The "X NOT NULL" selector format activates the indexed subscriber optimization.)
    Tom
    Edited by: TomB on Apr 27, 2010 10:44 AM

  • How do i view photos in macbook pro, and while viewing how can i delete the unwanted photos with delete button?

    1 My questions are about viewing and managing photos from a folder.
    a. How do i view photos in macbook pro - i know the space bar thingy but does not help my purpose?
    b. While viewing how can i delete the unwanted photos with delete button?
    c. How can i increase the size of the photos that i am seeing in the form of icons?

    double clicking in iPhoto will open the photo.
    The left and right arrow key will move between photos, as well as swiping on a trackpad or Apple mouse.
    See >System Preference>Trackpad or mouse  for options and tut
    While selected or in the smaller icon view hitting the Delete key will delete the pic.
    Command Z will undo the last action taken.
    Periodically you have to empty the iPhoto trash.  iPhoto drop down menu>empty trash
    Same applies for viewing pics in a Folder NOT in iphoto,  Use the up and down arrows does not work in Preview, but as you know in QuickLook (spacebar) the up and down arrows will navigate.

  • How can I delete the area which I have selected with Pen Tool?

    Hi,
    I have selected the particular area of my background image, which is just complicated. Now, I would like to delete the selection so that I will copy something else in that blank area. How can I delete the selected area?
    Thanks.

    Hobotor wrote:
      Uhm you mean "rightclick---> make selection---> delete "?
    Hi,
    But I can't see such option. Please look below the snapshot:
    I want to remove the existing image (Girl's Image) and insert some other image. Please help.
    Thanks.

  • How can i delete the find my iphone app on my ipod if i can't remember the password to get into it.

    how can i delete the find my iphone app on my ipod if i can't remember the password to get into it. I've tried everything reset my ipad, however, it keeps telling me to delete the app. But I can't get into the device to delete the app.
    What else can I do?
    Please help!

    If the iPad was running iOS 7,  iCloud: Find My iPhone Activation Lock in iOS 7
    http://support.apple.com/kb/HT5818
    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • I utilise Entourage for my mails. When I tip a mail adress and write a wrong one, I change. When I will send again a mail to the same adress the wrong and good one appears both.  How can I delete the wrong one

    Question is here above but more details here under
    I use Entourage as Mail sender. I don't use the adress book.
    When I tip a wrong adress  and make the correction, the old one stays in the memory of my computer ( apple I Mac ).
    When I wish to send a new message to the same adress, the wrong one appears in the same time , and some time I don't remember wich is the good one .
    To avoid that problem, how can I delete the wrong adress for future sending of mails.

    Solution, use Apple Mail
    I can highly recommend migrating to the Address Book. You won't have the typo'ed history in your email.
    Here's the KB on how to clear the list
    http://support.microsoft.com/kb/823667

  • How can I delete the duplicates in one go, rather than individually?I consoladated my iTunes library looking for a song I bought...my whole library is now duplicated. Thousands of songs and hundredes of podcasts.

    I consolidated my iTunes library and now I have duplicates of everything, podcasts, songs, play lists...everything. How can I delete the whole set of duplicates at once. It is thousands of items I can not do them indiviually.
    Thanks

    I consolidated my iTunes library and now I have duplicates of everything, podcasts, songs, play lists...everything. How can I delete the whole set of duplicates at once. It is thousands of items I can not do them indiviually.
    Thanks

  • How can i delete the masters of iPhoto without losing my photos

    Mac Book Pro (Mid 2012) 13 inches
    256 Solid State Start up Insert in DVD Drive
    1T Hard Drive in reg slot
    16 GB Ram
    Mavericks 10.9.4
    iphoto 9.5.1
    I am currently keeping my iPhoto library on my 256 SS Main Drive of my MacBook Pro.
    How can I delete the masters of iPhoto without losing my photos in the main iPhoto display library and all their masters and edits.
    I take loads of photos and import them and then will keep only 5% of the ones that I import.  As a result I have a masters folder of over 50GB and actual photos that take up less that 5GD.  Is it possible to delete the master folder without losing all the photos and without having to pain stakingly go through every folder and pick out from literally hundreds the ones that i kept and edited.  How do I reduce the size of the masters just down to the ones that I have kept and not every single photo and video that I imported in the history of my iPhoto experience.
    If I delete the master folder will all the photos and their edits be deleted.
    If so, is there a way to just delete the masters that are no longer in the iPhoto library, while keeping the masters and edits of the ones that I clearly want to keep because they are the ones that I did keep.
    Why do they keep the masters of photos that I clearly deleted and emptied the trash on.
    I like to maximize space and this would help a lot to clear up for me.  Thank you.

    All the 5000 photos that reappeared after repair today were from my canada mega event, but for some reason it did not do it for all the other mega events.  It is a start but not complete.
    Try the rebuild to recover more lost photos.
    If "rebuild" with iPhoto does not recover more lost photos, rebuild with iPhoto Library Manager as described by Old Toad in this thread, but rebuilding with iPhoto Library manager will not recover your projects like cards, bilks, slideshows.
    Re: iPhoto glitch with retained masters https://discussions.apple.com/message/26354337#26354337
    Mostly the way I organize all my photos is that I make a folder for each country I visit.  i.e. New Zealand Folder, Canada Folder, India Folder; and at the same time, any photos that I import I delete directly from new imports and just keep the ones i want and then i go up to events and move the latest imported event into a mega event for that country and so they all get joined in a sense.
    As a workaround, merge the events right after importing, before you start deleting photos.  And empty the trash always before merging projects.
    You might consider to use albums instead of events for your country lists.   I simply use the events as basic containers. One event for each day of shooting photos. I found, that smart albums and searches are quicker in iPhoto and Aperture, if the events are smaller, also browsing is easier, if the events are not so large.
    You can merge albums and remove photos from albums without the problems mentioned above.

  • I want to update iCloud account with new apple id but don't know password for old apple id.  Plus can no longer receive email at old apple id.  How can I delete the current iCloud account on my iPhone if the previously stated conditions exist?

    I want to update iCloud account with new apple id but don't know password for old apple id.  Plus can no longer receive email at old apple id.  How can I delete the current iCloud account on my iPhone if the previously stated conditions exist?

    If the old ID is yours, and if it is an earlier version of your current ID, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iDevice, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll.  When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • I have two apple id's because my hotmail account is no longer active. How can I delete the old one and use or update the new one?  Every time I try it won't allow me and now my iPad thinks there are two accounts and they are arguing with each other. Help!

    I have two apple id's because my hotmail account is no longer active. How can I delete the old one and use or update the new one?  Every time I try it won't allow me and now my iPad thinks there are two accounts and they are arguing with each other. Help!

    You can't merge accounts or copy content to a different account, so anything that you bought or downloaded via the old account is tied to that account - so any updates that those apps get you will only be able to download via that account. You can change which account is logged in on the iPad via Settings > Store

  • The e mail address in my I tunes setting is different but when I update my apps a different e mail address come . How can I delete the e mail address which shows for updating apps

    The e mail address which is in the setting of my I tune store does not show up when I install apps or update them it shows a different email address how can I delete the e mail which shows up while updating apps & switch to the one already in my settings

    All apps include DRM protection that is tied to the Apple ID that was used to download the apps.
    This means the apps that need an update were downloaded with the Apple ID you are being prompted for.

Maybe you are looking for

  • Report on SD

    Hi Gurus, I have a doubt on Grouping can anyone please help me regarding this. The issue is i displayed the vendors and many materials they are supplying like Vendor, No.of Material 100, 5 200, 11 1000, 25 and so on.................... Now i want to

  • Add Contact Photo from iPhone Mail Attachment?

    Pardon if this has been posted, I didn't find anything that answered my question. I have a photo I received on my iPhone (e-mail) that I'd like to use for a contact. Is there a way on the iPhone to set that photo to a contact? Thanks. Tek

  • Why wont any of my programs download correctly?

    I'm downloading both Photoshop and Lightroom and for some reason when they should be done, it give me a error.. "Installation failed - Learn More". When I click learn more, it gives me this information.. Error Exit Code: 6 Please see specific errors

  • Why is the clock time off on my imac

    The clock on my iMac is off about 10 minutes. How does this happen with a battery back up?

  • SE09 vs SE10,   SM30 vs SM31

    Hi, I do not find any reason behind attaching 2 diff transactions to same programs in SAP. SE09 & SE10 have been assigned to the same program RDDM0001 screen 100  and authorization object S_TRANSPRT. Similarly SM30 & SM31 have been assigned to the sa