How can I design a time controlled applicatio​n

I want to build a time controlled VI which can provide chemical actions e.g. to open or close valves etc. The duration of the actions, the steps are written down in a spreadsheet e.g. from 0...1 min open valve A, from 1...10 min open valve B etc. The user should have the possibility to pause the run and resume at the same point. Can someone help me to find the most effective way to solve this problem? Thanks Ruediger (I use LV 6.0 on NT4)

I have a simple example that I had been working on. I made a couple modifications based on what you described. Check this out and see if it helps.
Attachments:
tank_fill.zip ‏20 KB

Similar Messages

  • How can i design square signal which having a positive and negative values equal to each other and separated from each other by controlled time or distance

    How can i design square signal which having a positive and negative values equal to each other and separated from each other by controlled time or distance, As it is shown in the figure below. and enter this signal in a daq.
    Solved!
    Go to Solution.

    By the time you spend for the nice diadram you might have done the vi
    Your DAQ like to have a waveform (array of values and dt ak 1/samplerate)
    If you set the samplerate you know the array length , create a array of zeros, and set the values of both amplitudes ... 
    Since I don't want to wire others homework here are some pictures
    And there are some drawbacks is room for improvement in my solution, just think of rounding errors ... and what might happen if the arrays get bigger ....
    Spoiler (Highlight to read)
    Greetings from Germany
    Henrik
    LV since v3.1
    “ground” is a convenient fantasy
    '˙˙˙˙uıɐƃɐ lɐıp puɐ °06 ǝuoɥd ɹnoʎ uɹnʇ ǝsɐǝld 'ʎɹɐuıƃɐɯı sı pǝlɐıp ǝʌɐɥ noʎ ɹǝqɯnu ǝɥʇ'

  • How can I put a time delay between specific events in a while loop?

    How can I put a time delay between specific events within the same while loop? I'm already using the "wait" command to control the overall loop iteration speed. But I want to time the individual events as well.

    Hi Jesse,
    You can use a flat sequence. In each box you can put your individual events and attached wait.
    Don't forget to reduce your total loop time of the time you added in the individual sequences.
    Doc-Doc
    Doc-Doc
    http://www.machinevision.ch
    http://visionindustrielle.ch
    Please take time to rate this answer

  • How can I open the 'time date browse button'?

    Hello!
    How can I open the 'time date browse dialog' from the time stamp control in my block diagram? I tryed it with the property node but couldn't find this item to open the 'time/date browse dialog'!
    Thanks in advance for your help

    There is no way to programitically bring up the dialog window for the timestamp control. I recommend building your own dialog window VI that will work by opening when you want the user to set the time and when it closes, it can programatically update the timestamp control. It will not be as pretty but it will be just as functional.

  • How can be implemented  a Timer?

    Hi,
    I have this simple question:
    - How can I implement a timer?
    The current SOA palette in JDeveloper doesn't provide any Timer action.
    This would be very useful to have. Is the Oracle SOA team planning to implement a timer control in JDeveloper?
    Thanks
    Alexandru

    Alexandru,
    I think that in this release you need to implement a timer by yourself. You can use Quartz, the EJB Timer, or the OC4?J scheduler, or an external scheduler.
    I think that in future releases there is a plan to add such a feature, but I'm not sure.
    ~ronen

  • How can I view my time capsule pic with my iPad

    How can I view my time capsule pic with my iPad

    What do you mean by "time capsule pic"
    Do you mean pictures stored on the TC?
    The ipad has no ability to access files.. so you need a file app.. there are plenty of them available.. filebrowser is one. What application you use to view files will depend on the format of the files.. google for that.
    The TC has no media server ability whatsoever.. it is a dumb as a board hard disk in a router. And should be treated as such.. especially to remember they die.. rather badly and suddenly.. and are difficult to backup should they do so.. it is design as a backup target for TM.. but TM cannot backup a TC or any other network drive.

  • How can I use my time capsule with windows7

    How can I use my time capsule with windows7?

    This is asked regularly.
    https://discussions.apple.com/message/10978060#10978060
    Look at the more like this. On the right column next to the post.
    Load airport utility for windows.. which will also load bonjour for windows.
    In windows explorer type \\TCname or \\TCipaddress (replacing with the actual values.. names with spaces will give you trouble so change all names in the TC to SMB compatible or actual ip address).

  • How can I copy a time machine backup from one Time Capsule to another ?

    How can I copy a time machine backup from one Time Capsule to another ? I bought a 1 Tb Time Capsule to replace my 512Mb Time Capsule. Now, I like to copy my time machine backup from the old Time Capsule to the new one so I can keep using my backup.

    from this support article: 
    (click on image to enlarge)

  • After a clean install, how can I continue using Time Machine?

    After a clean install, how can I continue using Time Machine?
    I booted from my recovery partition, erased my HD, installed the same OS, (Lion, 10.7.5) then restored from my TM.
    If it asks if i want to use TM, I say yes. When I chose the drive, it seems to want to start all over, instead of just picking up where I left off.
    Is there any way of picking up where I left off?

    Hi Frank,
    You are sure you looking in your Library in /Users/YOUR_USERNAME/Library and not /Library at the top level of your harddrive?
    When you open iCal what do you see?  Are the calendars the two default Home and Work ones?
    I really appreciate the responses -- especially if you are in the UK as opposed to Ontario.
    Why, do you have something against London Ontario?
    John M

  • Hi! how can I set the time machine/capsule back-up intervals? Heron 2

    HI! EVERYBODY,
    HOW CAN I SYNC 2 TIME CAPSULES INSTALLED IN TWO DIFFERENT LOCATIONS, MAIN HOME AND SUMMER HOME?
    THANK YOU FOR YOUR HELP.
    MERCi
    HERON2

    To use different backup intervals use TimeMachineEditor 2.5.3. I do not think syncing two Time Capsule to one another is feasible or possible. For all things Time Machine visit Pondini's Time Machine FAQ

  • I have just installed a 2TB time capsule on my iMac i7, it see my second 1TB hard drive but the 256 SSD doesn't come up in the list of hard drives I can back up. How can I enable the time machine to see my first SSD 256gb hard drive?

    I have just installed a 2TB time capsule on my iMac i7, it see my second 1TB hard drive but the 256 SSD doesn't come up in the list of hard drives I can back up. How can I enable the time machine to see my first SSD 256gb hard drive?

    iLife is preinstalled on all the Macs. If you purchased iLife in the App Store or your computer came without DVDs, open App Store > Purchases and download the applications. If your Mac came with discs, insert the Applications DVD and install iLife applications

  • My wife and I share an apple id how can we use face time

    My wife and I share an apple ID. How can we use face time?

    Try the MacBook Pro forums and perhaps Apple ID or Facetime, this forum does not deal with notebooks or facetime.
    MacBook Pro
    https://discussions.apple.com/community/notebooks/macbook_pro 
    https://discussions.apple.com/community/mac_os?view=discussions
    http://www.apple.com/support/macbookpro
    http://www.apple.com/support/

  • How can I fix a time error on my MacBook?

    How can I fix a time error on my MacBook?

    If, after checking the settings in Sys Pref> Date/Time nothing really changes
    you could see if a reset of the NVRAM could help.
    Read carefully & when using the keyboard sequence, let the computer
    start tone sound three times, to be sure the reset has really occurred.
    •About NVRAM & PRAM:
    http://support.apple.com/kb/HT1379
    Does the time gain by itself? Is the Time Server set to automatically
    keep the computer time corrected when you are online? You may
    also try the manual settings, if the computer had not been used in
    some time, because if the battery gets too low, the capacitor in a
    portable computer can also lose power, & NVRAM - PRAM chip
    settings could be lost. However by then, Date can also be wrong.
    Was there anything else going on that may have affected this?
    Sometimes odd items are related to something else.
    Good luck & happy computing!

  • How can i design a smart antenna using labview?? plzz

    i have my final year project. I am student of Beng in Telecommunications. How can i design a smart antenna using switched beam algorithm on lab view??

    You can hardly use LabVIEW to design antenna, but definitely can use LabVIEW for Characterization, Optimization, and Test your antenna design.
    Hope you got the point here.
    I am not allergic to Kudos, in fact I love Kudos.
     Make your LabVIEW experience more CONVENIENT.

  • How can I set my time capsule to back-up only once a day?

    How can I set my time capsule to only back-up once a day.  It appears to be backing up several times a day.  Not sure there is a set schedule for the back-ups and they take a great deal of time; over an hour each.

    tdenny2 wrote:
    Not sure there is a set schedule for the back-ups and they take a great deal of time; over an hour each.
    Then something is wrong.  Changing the schedule will only deal with the symptom (and give up one of the better features of Time Machine's usually quick and unobtrusive hourly backups).
    See if the size of the backups makes sense, considering what you've changed since the previous one.  If it seems much too large, that may be the problem.  See #D4 in Time Machine - Troubleshooting for some common culprits and ways to see just what's going on.
    If the sizes seem reasonable, see #D2 in the same link for things that can cause extra-slow backups.

Maybe you are looking for