How can i determain the user language

i have a user name how can i identfy is he indian user or german user.

Hi
But u need to know the logon language or the country of the user?
In logon data the logon language is set for every user, u can find it in table USR01, but if need to know where the user is from: it's not easy, u can check the address data.
Max

Similar Messages

  • HT201342 How can I change the USER of my i-cloud address? My 12 year old set up the e-mail account and used a silly user name (like: turtle!!). I would like to have an icloud e-mail account but under my own user name. The other /old name can be deleted?

    How can I change the USER name of my i-cloud e-mail account? It was set up by my son and he used a silly / embarrassing user name. I would like to change this name OR set up another i-cloud e-mail account under my own name / reference. Help?

    iCloud email addresses can't be changed or deleted, but you can set up an alias namethat he can use which will be linked to his current iCloud account and will receive email in the existing iCould inbox.  This guide explains how: http://support.apple.com/kb/PH2622.

  • How can  I  restrain the user login portal once, in the same time ???

    Hi
    I need to restrain the user can't repeat to login portal ....
    to reduce portal loading
    How can I restrain the user login portal once, in the same time???
    Which attributs in Identity Manager or amconsole I can do it to restrain the user ??
    tks

    Does your portal support anonymous access? If so, make sure you are using the authlessanonymous mode. This mode only creates one session that is shared for all anonymous users. This is much more efficient than anonymous access, which creates a session for each anonymous user.
    I have no other recommendation for limiting users to a single login. In general, web applications do not behave like this. What if a user closes their browser without logging out? Does the user have to wait until the session times out in order to log back in again?
    The same thing is true for users that are mobile. If a user leaves their office without logging out and then attempts to log in with a laptop in the conference room, then access will be denied in your implementation. Users do not expect this type of limitation being built into the system.
    If you are having problems scaling, then you need to look at your architecture and perhaps add some more resources. Also, make sure you are making efficient use of the authlessanonymous access mode as stated above.
    - Jim

  • The Ipad2 Application Data folder is taking up huge space in C: Drive. How can I shift the User Application data for iPad2 to another Drive?

    The Ipad2 Application Data folder is taking up huge space in C: Drive. How can I shift the User Application data for iPad2 to another Drive?

    Thanks a lot for the response. Yes, I am checking my C: drive data thoroughly now, including the hidden folders, to ascertain if something else can be moved, as per your suggestion.

  • How can i receive the user name of the present operating system

    HI,all.
    how can i receive the user name of the present operating system from SAP.Have any funciton to use?Thankyou!

    use sy-uname system field.
    report ztest.
    write:sy-uname.
    thanks.
    reward if solved.

  • How can I choose the movy language? I know several ones and enjoy watching the movies in the original one.

    How can I choose the movy language? I know several ones and enjoy watching the movies in the original one.

    If the film's description page says that it has different audio tracks then you should be able to select the language via the playback control : http://support.apple.com/kb/HT5562

  • How can i change the user that open the rfc connection (sm58) from R/3?

    Hi all,
    i'd like to know how can i customize the user 'connecting' R/3 and BW, i mean: when i launch a data extraction a fixed user creates the rfc connection to BW (and i can see it from tcode sm58 in r/3), i need to use a different username so that it will come be more easy for me to reorganize the rfc queue in case of errors (we are doing some testing), it's possible to do something like this or everyone has to share the same user r/3 side?
    I hope i've been clear...
    thanks for the help
    S.

    Hi...
    Its recommended that only one user executes the RFC because you must manage the authorizations for remote execution only with few users....in case on error you can send the user as a parameter of the RFC  and you can buid the error message with this parameter and identify the user of execution...
    I hope this helps you
    Regards

  • How can I change the playbar language?

    How can I change the playbar language? Tool tips...

    Hello,
    You will need Flash to achieve this, instructions  can be found in this blog post:
    http://blogs.adobe.com/captivate/2009/03/localizing_playbar_tool_tips.html
    Lilybiri

  • How can I change the desktop language from english into german??

    how can I change the desktop language from english into german??

    See:
    *http://www.mozilla.com/en-US/firefox/all-beta.html

  • How can I find the USer Exit...

    Hi,
    How can I find the USer Exit...
    I need to do changes for this User Exit :EXIT_SAPLKEII_002
    In which T-code I can open this Exit
    Ex: Go to some Transcation code and then give the name of the Exit ato access this Exit
    ...any sugesstions will be apprecaited!
    Thanks & Regards,
    Kittu

    Hi,
        the EXIT : EXIT_SAPLKEII_002 is the exit,in this SAPLKEII is the standard Program.Copy this program and go to transactio SE38 and press Enter and then go for the option Where used list and check the check box Transaction. It displays the possible Transactions that the Exit triggers
    Regards,
    Vijaya Lakshmi.T

  • How can i change the user on FaceTime? im trying to do this on a iMac

    how can i change the user on FaceTime? im trying to do this on a iMac

    I'm using an iMac with OSX 10.6.8.  The proceedure on your system is probably similar.
    Get the Facetime window up, and go to Facetime preferences.  Click on "account,"  you'll see a view account option that will prompt you to sign in with your Apple id and password.  From there you can make the changes that you want.

  • How can we restrict the users/planners for a planning book?

    Hi experts,
    How can we restrict the users/planners for a planning book?
    Thanks,
    Naga.

    Hi Naga,
    we describe this in our SAP Demand and Supply Network Planning rapid-deployment solution.
    Access this area directly via
    http://service.sap.com
    /rds-dpa
    In the configuration guide Demand Planning Settings, Macros and Chart
    Engine (DP3) read Appendix: Setting up Roles and
    Authorizations.
    BR Frank

  • How Can I record the user's logging time?

    How Can I record the user's login time?I create a table containing some column such as record_id,username,start_time,end_time,period.How can I create a process on logging in to record the start_time and a process on logging out to record the end_time?
    Thanks for any help.

    you can refer to the name of the currently logged in user using :APP_USER. to capture the login info, i'd add an htmldb process to my app that fired "After Authentication" and simply inserted :APP_USER and sysdate into my logging table. for the logout case, you could change the "Logout URL" of your current authentication scheme to one that does whatever it's currently doing plus the logging. so i Logout URL of...
    wwv_flow_custom_auth_std.logout?p_this_flow=&APP_ID.&p_next_flow_page_sess=&APP_ID.:101:&APP_SESSION.
    ...and i changed it to something like...
    my_schema_name.my_logout?p_user=&APP_USER.&p_app=&APP_ID.&p_session=&APP_SESSION.
    ...where my_logout was...
    create or replace procedure my_logout(
    p_user in varchar2,
    p_app in varchar2,
    p_session in varchar2) as
    begin
    insert into my_logging_table values (sysdate, 'logged out as '||p_user);
    wwv_flow_custom_auth_std.logout (
    p_this_flow => p_app ,
    p_next_flow_page_sess => p_app||':101');
    end;
    ...and things worked fine.
    hope this helps,
    raj

  • How can i get the system language of machine in script

    Hi,
    During postinstall, i want to install file based on the system language.
    How can i get the system language of machine in script ?
    Thanks,

    Michael Conniff wrote:
    I don't get it: what you posted gives a list of all the languages (and I don't see what awk brings to the party).
    Hmm. On my laptop the first bit gets me the list of languages as they appear in the listing in the International preferences pane:
    (en, de, es, ja, fr, it, nl, sv, nb, da, fi, pt, "zh-Hans", "zh-Hant", ko)
    So I piped that to awk to pull out just the first one (they're ordered just like they are in the prefs pane, with the current language first). But that gives me some extra text:
    (en,
    So I piped that to sed to remove the comma and parenthesis. That gives me the current code, which in my case was "en" (or "de" if I switched the language).
    defaults read -g AppleLocale
    gives me en_GB. So maybe this last is better for you?
    Well, sure, if you want to do it the easy way. But where's the fun in that? Seriously though, I get en_US, which is a more accurate and complete view of my settings...
    charlie

  • How can I change the user's neme in Sidebar

    how can I change the user's neme in Sidebar

    same here "i cant change the text iether"
    new i movie user on new mac book pro 

Maybe you are looking for

  • Creating database Manually

    Dear Experts I want to create database in oracle 10g manually, without using dbca or create database script on sql. I have been searching google, but not getting any related document. Can you please guide me or provide any link where I get steps to c

  • How Long does it typically take...

    I just bought Lion, but they said it could take a few hours to a day to get the email containing the program.  About how long will it be? Thanks in advance!

  • Editing a layer's out point in time without affecting in point??

    I'm really embarrassed about this... I certainly USED to know how to do it... and I've searched for the answer, and I thought it was going to be easy to find, and it wasn't... Anyway. I need to edit a layer's OUT point without affecting the location

  • How to improve the query performance

    ALTER PROCEDURE [SPNAME] @Portfolio INT, @Program INT, @Project INT AS BEGIN --DECLARE @StartDate DATETIME --DECLARE @EndDate DATETIME --SET @StartDate = '11/01/2013' --SET @EndDate = '02/28/2014' IF OBJECT_ID('tempdb..#Dates') IS NOT NULL DROP TABLE

  • Different color for values in dropdown list

    Hi All, I have a dropdown list, is it possible individually color the values in the list like first and third green 2 and 5th values blue etc. Thanks