How can I determine if my phone is jailbroken or running a proper IOs?
I bought my iPhone previously owned, it worked wonderfully until just recently when setting began changing themselves, someone else's voice recorded an unknown voice for playback the next time I called in. Just prior to trying to change my password and ultimately loosing everything the Alarm app took in upon itself to set and alarm during a time when I would normally be sleeping. Other than these creepy unexplainable I find myself questioning weather I should try to work with this phone again? How does one tell if the iPhone has been abused?
OK, well when the alarm set itself it creeped me out pretty good and my first reaction was to change my pass code, then about 30 min later when I went to use it the code wouldn't work, or the old code, the phone kept telling me wrong code and then went thru a series of wait 15 min, 60 min and so on,,,,I fell asleep and hours later the phone now wants my SIM password, after entering it the phone now wants a new SIM with no pin and appears to want to go thru a set up stage. I went to my provider and picked up a new chip, I am about to call it in and have it registered to my account. Does this sound right? Is it reseting it back to that of a new phone? Does this mean it is not jail broken anymore?
Similar Messages
-
How can I determine which ver. of foxfire I am running
Who can I tell which ver. of foxfire I am running ?
Is it possible to go back and forth between web pages ???You can see that via Help > About Firefox.
More information on the Help > Troubleshooting Information page.
*https://support.mozilla.com/kb/Using+the+Troubleshooting+Information+page -
I've got an old I-phone. How can I determine what model it is? 3 or 4.
I've got an old I-phone. How can I determine what model it is? 3 or 4.
Append the last three characters of its serial number to http://www.everymac.com/ultimate-mac-lookup/?search_keywords= and load the page.
(104117) -
How can I determine how many events are in my calendars?
The web version of my iCloud Calendar and subsequently also my Calendar.app did show recently various malfunctions and error messages that were inconsistant. Also, Calendar.app crashed when I was editing events. Finally, Calendar.app did complain that my iCloud account would be out of quota, and did direct me to this KB article:
http://support.apple.com/kb/HT4489
I did not know about these quotas before which are not really high and quite limiting for use over longer periods of time. After checking them, I think that my real data are below these limits. However, there might be one exception:
- Total number of calendars, events, and reminders: 25,000
25,000 sounds a lot, but when you devide by 6 events per day (which is easily reached if you combine family and buisness, and maybe repeated events also count for each repetition at least after editing), one ends up at 4200 days which is not much more than 11 years. I am using Calendar with data since the year 2000 (for some time I used Palm Desktop that took over the (very) old Mac Calendar application and imported/moved the data when iCloud Calendar became available).
My questions:
- how can I determine the number of events in my calendars?
- which events do count in which way for the quota limit?
- what about events from shared calenders - do they count if owned by another account?
- what about repeated events which are partially edited?
Thanks in advance for any hint!Hi there
I ran into the same problem last year. The solution I used is available here:
http://forums.macrumors.com/showthread.php?t=1693875
Apple don't seem keen to tell you you've reached your limit and if you think that isn't helpful tough luck. I reached due to duplicate events being created. I didn't know what had happened until I eqnuired further on the above forum. Someone needs to create an event counter application. Perhaps they have. Would need to do a search.
However I've now reached the limit again and I'm not sure why, cue more faffing around being required. That's one of the problems of using a Mac computer with an Android phone.
As for the limit, it exists and if you dont like it you need to change the way you work not Apple. That's the impression I get. Alternatively use something else that has more generious limts. I don't know what that would be. I did consider moving my calendars to Google but it would have meant certain functionality would not work in BusyCal, the third part calendar application I use on my Mac computer. -
I see there is another ios update. I have an iPhone 4S. The last time I updated the ios I lost all my contacts, as I had not been using the iCloud as a backup. I am now apprehensive about the latest update. How can I determine if contacts are backed up?
You should never lose contacts under any circumstances.
Although contacts are included with the iPhone's backup, contacts are designed to be synced with a supported address book app on your computer where such important data should be available with or without an iPhone or any cell phone. Not a good idea to depend on a cell phone for such important data which can be lost or stolen or damaged beyond repair.
In addition, there are a number of free email accounts that support syncing contacts over the air including an iCloud account, Gmail, Yahoo, and Hotmail.
If you are not syncing contacts over the air with an iCloud account and not backing up your iPhone wirelessly with your iCloud account, your iPhone's backup is being updated by iTunes on your computer which is updated as the first step during the iTunes sync process.
With Windoze, contacts can be synced with Outlook 2003, 2007, or 2010 along with syncing calendar events, notes, and reminders, or with the address book app used by Outlook Express and by Windows Mail called Windows Contacts for syncing contacts only. With a Mac, contacts can be synced with the Address Book app. This is selected under the Info tab for your iPhone sync preferences with iTunes.
If the supported address book app on your computer is not used and has no contacts available, before the first sync for this data enter one contact in the supported address book app on your computer. This will provide a merge prompt with the first sync for this data, which you want to select. -
How can i factory unlock my phone.....
how can i factory unlock my phone.
As always, contact the original cellular provider to determine their unlocking policy, and if you qualify.
-
Hello. I would like to write async tcp client and server. I wrote this code but a have a problem, when I call the disconnect method on client or stop method on server. I can't identify that the client or the server is no longer connected.
I thought I will get an exception if the client or the server is not available but this is not happening.
private async void Process()
try
while (true)
var data = await this.Receive();
this.NewMessage.SafeInvoke(Encoding.ASCII.GetString(data));
catch (Exception exception)
How can I determine that the client or the server is no longer available?
Server
public class Server
private readonly Dictionary<IPEndPoint, TcpClient> clients = new Dictionary<IPEndPoint, TcpClient>();
private readonly List<CancellationTokenSource> cancellationTokens = new List<CancellationTokenSource>();
private TcpListener tcpListener;
private bool isStarted;
public event Action<string> NewMessage;
public async Task Start(int port)
this.tcpListener = TcpListener.Create(port);
this.tcpListener.Start();
this.isStarted = true;
while (this.isStarted)
var tcpClient = await this.tcpListener.AcceptTcpClientAsync();
var cts = new CancellationTokenSource();
this.cancellationTokens.Add(cts);
await Task.Factory.StartNew(() => this.Process(cts.Token, tcpClient), cts.Token, TaskCreationOptions.LongRunning, TaskScheduler.Default);
public void Stop()
this.isStarted = false;
foreach (var cancellationTokenSource in this.cancellationTokens)
cancellationTokenSource.Cancel();
foreach (var tcpClient in this.clients.Values)
tcpClient.GetStream().Close();
tcpClient.Close();
this.clients.Clear();
public async Task SendMessage(string message, IPEndPoint endPoint)
try
var tcpClient = this.clients[endPoint];
await this.Send(tcpClient.GetStream(), Encoding.ASCII.GetBytes(message));
catch (Exception exception)
private async Task Process(CancellationToken cancellationToken, TcpClient tcpClient)
try
var stream = tcpClient.GetStream();
this.clients.Add((IPEndPoint)tcpClient.Client.RemoteEndPoint, tcpClient);
while (!cancellationToken.IsCancellationRequested)
var data = await this.Receive(stream);
this.NewMessage.SafeInvoke(Encoding.ASCII.GetString(data));
catch (Exception exception)
private async Task Send(NetworkStream stream, byte[] buf)
await stream.WriteAsync(BitConverter.GetBytes(buf.Length), 0, 4);
await stream.WriteAsync(buf, 0, buf.Length);
private async Task<byte[]> Receive(NetworkStream stream)
var lengthBytes = new byte[4];
await stream.ReadAsync(lengthBytes, 0, 4);
var length = BitConverter.ToInt32(lengthBytes, 0);
var buf = new byte[length];
await stream.ReadAsync(buf, 0, buf.Length);
return buf;
Client
public class Client
private TcpClient tcpClient;
private NetworkStream stream;
public event Action<string> NewMessage;
public async void Connect(string host, int port)
try
this.tcpClient = new TcpClient();
await this.tcpClient.ConnectAsync(host, port);
this.stream = this.tcpClient.GetStream();
this.Process();
catch (Exception exception)
public void Disconnect()
try
this.stream.Close();
this.tcpClient.Close();
catch (Exception exception)
public async void SendMessage(string message)
try
await this.Send(Encoding.ASCII.GetBytes(message));
catch (Exception exception)
private async void Process()
try
while (true)
var data = await this.Receive();
this.NewMessage.SafeInvoke(Encoding.ASCII.GetString(data));
catch (Exception exception)
private async Task Send(byte[] buf)
await this.stream.WriteAsync(BitConverter.GetBytes(buf.Length), 0, 4);
await this.stream.WriteAsync(buf, 0, buf.Length);
private async Task<byte[]> Receive()
var lengthBytes = new byte[4];
await this.stream.ReadAsync(lengthBytes, 0, 4);
var length = BitConverter.ToInt32(lengthBytes, 0);
var buf = new byte[length];
await this.stream.ReadAsync(buf, 0, buf.Length);
return buf;Hi,
Have you debug these two applications? Does it go into the catch exception block when you close the client or the server?
According to my test, it will throw an exception when the client or the server is closed, just log the exception message in the catch block and then you'll get it:
private async void Process()
try
while (true)
var data = await this.Receive();
this.NewMessage.Invoke(Encoding.ASCII.GetString(data));
catch (Exception exception)
Console.WriteLine(exception.Message);
Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host.
By the way, I don't know what the SafeInvoke method is, it may be an extension method, right? I used Invoke instead to test it.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
How can I determine the type of video out connector I need?
Howdy,
I have a white macbook purchased Jun/2008. I want to connect to a TV but don't know what adapter I need. How can I determine the type of video out jack my macbook has?
System Profiler says the model identifier is "MacBook 4,1". Under Graphics/Displays the only thing it says about the "Display Connector" is that no display is connected. Too bad it doesn't tell me what type of connector it is. If I knew the name of the connector I'd probably be home free. But it seems like every macbook model has a different video connector (since the state of the art has advanced over the years) and I haven't been able to keep up with the names.
Now, I have a 6" long adapter that will convert this connector to VGA. And searching the Apple store for VGA adapters, the existence of mine says my connector is might be one of "Mini DisplayPort", "Apple Mini DVI", "Apple DVI", or "Apple Micro-DVI". But then there is also the connector at
http://store.apple.com/us/product/M8639G/A?mco=MTY3ODQ5OTY
and that looks like the one I have. But unlike the other adapters, this one is just called a "VGA Display Adapter". Does the connector have a name? How can I find adapters that have that same connector?
I know I could use the adapter I have, plus a VGA to VGA cable, to hook up to a TV. But the quality of the VGA signal is poor in the digital world. My goal is to hook up to the TV via HDMI. Is this even possible? By which I mean, will my macbook generate the signals necessary to be able to be converted to HDMI?
Thanks for any help,
Zebulon TThanks, Ded,
You're right, the cable that I have won't work. I't from my previous, 2004 iBook. This is pretty embarrassing... I looked at the cable but didn't bother to try plugging it in.
Looking at the close-up picture of the Mini-DVI to VGA adapter, that does look like the right connector. So I have Mini-DVI, and the other apter you pointed to can convert this to DVI. I'll take a look to see what makes the most sense, connector wise, downstream from that.
Thanks very much.
Zeb T -
When I upgraded from v4 to v5 my bookmarks was lost. I do have the one that is in the firefox toolbar. Apparently I had a bookmarks add-on. V5 changed my browser how can I determine what the program was and if the bookmarks are still there?
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Websites remembering you and automatically log you in is stored in a cookie.
*Create an allow Cookie Exception to keep such a cookie, especially for secure websites and if cookies expire when Firefox is closed.
*Tools > Options > Privacy > Cookies: Exceptions
In case you are using "Clear history when Firefox closes":
*do not clear Cookies
*do not clear Site Preferences
*Tools > Options > Privacy > Firefox will: "Use custom settings for history": [X] "Clear history when Firefox closes" > Settings
*https://support.mozilla.org/kb/Clear+Recent+History
Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.
Clearing cookies will remove all specified (selected) cookies including cookies that have an allow exception and cookies from plugins. -
Hi anybody there who can help me ha..? My phone 5s was stolen 1 month ago..Find my phone is no a big deal bcz it seems to be wiped out all data including settings. it might be in use somewhere turning new fresh Gadget. How can i know whether my phone is in use??
You would know for a fact if the device is in use, but if you go back to the find my iPhone app in iCloud.com, you can either select to erase it, or place it in lost mode, in which case, once the device makes a connection to the internet, it will automatically go into that mode.
-
How can I determine what computers are home sharing??
How can I determine what computers are home sharing??
Launch iTunes on the computers you're interested in. Check in the "Advanced" menu.
If "Turn on Home Sharing" is listed as an option, the iTunes library that you have open is not Home Sharing.
If "Turn off Home Sharing ([accountname]) is listed as an option, the iTunes library that you have open is Home Sharing. -
Hello,
I am at my wits end into this. Either I am doing it the wrong way or it is not possible.
Let me explain. I need a vb script for the following scenario:
1. The script is to run on multiple Windows 7 machines (32-Bit & 64-Bit alike).
2. These are shared workstation i.e. different users login to these machines from time to time.
3. The objective of this script is to traverse through each User Profile folder and get the size of the 'My Documents' folder within each User Profile folder. This information is to be written to a
.CSV file located at C:\Temp directory on the machine.
4. This script would be pushed to all workstations from SCCM. It would be configured to execute with
System Rights
I tried the script detailed at:
http://blogs.technet.com/b/heyscriptingguy/archive/2005/03/31/how-can-i-determine-the-size-of-the-my-documents-folder.aspx
Const MY_DOCUMENTS = &H5&
Set objFSO = CreateObject("Scripting.FileSystemObject")
Set objShell = CreateObject("Shell.Application")
Set objFolder = objShell.Namespace(MY_DOCUMENTS)
Set objFolderItem = objFolder.Self
strPath = objFolderItem.Path
Set objFolder = objFSO.GetFolder(strPath)
Wscript.Echo objFolder.Size
The Wscript.Echo objFolder.Size command in the script at the above mentioned link returned the value as
'0' (zero) for the current logged on user. Although the actual size was like 30 MB or so.
I then tried the script at:
http://www.experts-exchange.com/Programming/Languages/Visual_Basic/VB_Script/Q_27869829.html
This script returns the correct value but only for the current logged-on user.
Const blnShowErrors = False
' Set up filesystem object for usage
Set objFSO = CreateObject("Scripting.FileSystemObject")
Set objShell = CreateObject("WScript.Shell")
' Display desired folder sizes
Wscript.Echo "MyDocuments : " & FormatSize(FindFiles(objFSO.GetFolder(objShell.SpecialFolders("MyDocuments"))))
' Recursively tally the size of all files under a folder
' Protect against folders or files that are not accessible
Function FindFiles(objFolder)
On Error Resume Next
' List files
For Each objFile In objFolder.Files
On Error Resume Next
If Err.Number <> 0 Then ShowError "FindFiles:01", objFolder.Path
On Error Resume Next
FindFiles = FindFiles + objFile.Size
If Err.Number <> 0 Then ShowError "FindFiles:02", objFile.Path
Next
If Err.Number = 0 Then
' Recursively drill down into subfolder
For Each objSubFolder In objFolder.SubFolders
On Error Resume Next
If Err.Number <> 0 Then ShowError "FindFiles:04", objFolder.Path
FindFiles = FindFiles + FindFiles(objSubFolder)
If Err.Number <> 0 Then ShowError "FindFiles:05", objSubFolder.Path
Next
Else
ShowError "FindFiles:03", objFolder.Path
End If
End Function
' Function to format a number into typical size scales
Function FormatSize(iSize)
aLabel = Array("bytes", "KB", "MB", "GB", "TB")
For i = 0 to 4
If iSize > 1024 Then iSize = iSize / 1024 Else Exit For End If
Next
FormatSize = Round(iSize, 2) & " " & aLabel(i)
End Function
Sub ShowError(strLocation, strMessage)
If blnShowErrors Then
WScript.StdErr.WriteLine "==> ERROR at [" & strLocation & "]"
WScript.StdErr.WriteLine " Number:[" & Err.Number & "], Source:[" & Err.Source & "], Desc:[" & Err.Description & "]"
WScript.StdErr.WriteLine " " & strMessage
Err.Clear
End If
End Sub
The only part pending, is to achieve this for the 'My Documents' folder within each User Profile folder.
Is this possible?
Please help.Here are a bunch of scripts to get folder size under all circumstances. Take your pick.
https://gallery.technet.microsoft.com/scriptcenter/site/search?query=get%20folder%20size&f%5B0%5D.Value=get%20folder%20size&f%5B0%5D.Type=SearchText&ac=2
¯\_(ツ)_/¯ -
How can I determine if my iMac is infected with Malware. Internet is very slow at times.
Some time ago I opened a link in an email from a friend and later found out that his email address had been hijacked. The site the link took me to seemed innocuous, but ever since it seems that from time to time that my internet connection is very slow, as if there is not enough band width. Is it possible that my computer is infected with some sort of malware? How can I determine that? If it is infected how can the malware be removed?
Here is the report.
Problem description:
I clicked on a link in a email from a hacked email account and since then my internet connection runs very slow at times. I am concerned that my iMac may be infected with some sort of Malware
EtreCheck version: 2.1.6 (109)
Report generated January 21, 2015 at 12:26:10 PM MST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
iMac (21.5-inch, Late 2009) (Technical Specifications)
iMac - model: iMac10,1
1 3.06 GHz Intel Core 2 Duo CPU: 2-core
12 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1067 MHz ok
BANK 1/DIMM0
4 GB DDR3 1067 MHz ok
BANK 0/DIMM1
2 GB DDR3 1067 MHz ok
BANK 1/DIMM1
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 9400 - VRAM: 256 MB
iMac 1920 x 1080
System Software: ℹ️
OS X 10.10.1 (14B25) - Time since boot: 1:8:36
Disk Information: ℹ️
WDC WD5000AAKS-40V2B0 disk0 : (500.11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 499.25 GB (398.65 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
PIONEER DVD-RW DVRTS09
USB Information: ℹ️
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Extensions
[loaded] com.symantec.kext.SymAPComm (12.7.1f4 - SDK 10.8) [Support]
[loaded] com.symantec.kext.filesecurity (12.7f4 - SDK 10.8) [Support]
[loaded] com.symantec.kext.fw (5.3.1f4 - SDK 10.8) [Support]
[loaded] com.symantec.kext.internetSecurity (5.4f4 - SDK 10.8) [Support]
[loaded] com.symantec.kext.ips (3.9.2f1 - SDK 10.8) [Support]
[loaded] com.symantec.kext.pf (5.7.1f4 - SDK 10.8) [Support]
/System/Library/Extensions
[not loaded] com.seagate.driver.PowSecDriverCore (5.2.4 - SDK 10.4) [Support]
/System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.2.4 - SDK 10.4) [Support]
[not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.2.4 - SDK 10.5) [Support]
[not loaded] com.seagate.driver.SeagateDriveIcons (5.2.4 - SDK 10.4) [Support]
Launch Agents: ℹ️
[running] com.brother.LOGINserver.plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
[loaded] com.symantec.errorreporter-periodicagent.plist [Support]
[loaded] com.symantec.nis.application.plist [Support]
[running] com.symantec.uiagent.application.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[running] com.fitbit.galileod.plist [Support]
[loaded] com.google.keystone.daemon.plist [Support]
[running] com.sec.faxdb.plist [Support]
[running] com.symantec.deepsight-extractor.plist [Support]
[loaded] com.symantec.errorreporter-periodic.plist [Support]
[loaded] com.symantec.liveupdate.daemon.ondemand.plist [Support]
[loaded] com.symantec.liveupdate.daemon.plist [Support]
[invalid?] com.symantec.MissedTasks.plist [Support]
[not loaded] com.symantec.nav.migrateqtf.plist [Support]
[invalid?] com.symantec.Sched501-1.plist [Support]
[running] com.symantec.sharedsettings.plist [Support]
[running] com.symantec.symdaemon.plist [Support]
[invalid?] com.symantec.symSchedDaemon.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[invalid?] com.google.GoogleContactSyncAgent.plist [Support]
User Login Items: ℹ️
Microsoft AU Daemon Application (/Applications/Microsoft AutoUpdate.app/Contents/MacOS/Microsoft AU Daemon.app)
Fitbit Connect Menubar Helper Application (/Applications/Fitbit Connect.app/Contents/MacOS/Fitbit Connect Menubar Helper.app)
Internet Plug-ins: ℹ️
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 2.3.8.1 [Support]
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Support]
FlashPlayer-10.6: Version: 16.0.0.257 - SDK 10.6 [Support]
Silverlight: Version: 5.1.30317.0 - SDK 10.6 [Support]
Flash Player: Version: 16.0.0.257 - SDK 10.6 [Support]
iPhotoPhotocast: Version: 7.0
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
QuickTime Plugin: Version: 7.7.3
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Support]
CouponPrinter-FireFox_v2: Version: Version 1.1.6 [Support]
GarminGpsControl: Version: 2.9.3.0 Release [Support]
NortonInternetSecurityBF: Version: 1.11.0 - SDK 10.6 [Support]
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
User internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 7.1 [Support]
Safari Extensions: ℹ️
Norton Internet Security [Installed]
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Flip4Mac WMV [Support]
Norton\nQuickMenu [Support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
Macintosh HD: Disk size: 499.25 GB Disk used: 100.60 GB
Destinations:
Seagate Backup Plus Drive [Local]
Total size: 1.00 TB
Total number of backups: 15
Oldest backup: 2013-08-01 22:49:49 +0000
Last backup: 2014-11-06 19:34:10 +0000
Size of backup disk: Adequate
Backup size 1.00 TB > (Disk used 100.60 GB X 3)
Top Processes by CPU: ℹ️
5% WindowServer
1% Fitbit Connect Menubar Helper
0% fontd
0% AppleSpell
0% launchservicesd
Top Processes by Memory: ℹ️
580 MB com.apple.dock.extra
322 MB SymDaemon
206 MB Google Chrome
168 MB spindump
155 MB mds_stores
Virtual Memory Information: ℹ️
7.46 GB Free RAM
2.59 GB Active RAM
1.51 GB Inactive RAM
1.05 GB Wired RAM
2.56 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Jan 21, 2015, 11:23:52 AM /Library/Logs/DiagnosticReports/rpcsvchost_2015-01-21-112352_[redacted].cpu_res ource.diag [Details]
Jan 21, 2015, 11:18:14 AM Self test - passed -
How can I determine which computer a share is connected to in /Volumes from terminal or a script?
I run a set of virtual machines via Fusion on an iMac that we run automated tests on for our website. There is a folder on each VM called /Automation that is shared.
I have a python script that runs on the host, that will find an open VM, start it up and then mount the VM's /Automation folder. So if there is only 1 VM powered on, the folder shows up in /Volumes as /Volumes/Automation. The problem is when there are 2 or more VM's powered on, because then the shares start being named /Volumes/Automation-1 and Automation-2 etc. So my question is, how can I determine which computer each share belongs to from terminal or a script?
In other words, I'm looking for something like:
/Volumes/Automation = "FirstVirtualMachineName.local"
/Volumes/Automation-1 = "SecondVirtualMachineName.local"
Is there any way to determine which computer a mounted share is connected to? In the past, I've just unmounted all /Automation folders, and then mounted them in a particular order, but that's unreliable and messy in my opinion. If anyone knows a better way, please let me know. Any help is appreciated.
Thanks,Well I think I have a workable solution. It's not perfect, but I think it will do the trick. I can put a spotlight comment on the folder similar to 'HostName=OSX-Automation-1.local' and can then retrieve that value from our server with the following python snippet:
import subprocess
out,err = subprocess.Popen(['osascript','-e','tell application \"Finder\" to get comment of \"Macintosh HD:Volumes:Automation-1\"'],stdout=subprocess.PIPE, stderr=subprocess.PIPE).communciate()
So I could just loop through each 'Automation*' folder in /Volumes and grab the name from the spotlight attributes on the directories. I don't think I really need to worry about the comments being overwritten, but I may have one of our launch daemons that run on the VM check that spotlight comment once a minute or something to ensure that the correct value is there.
If it ends up not working well in practice, I'm going to give your suggestion about a config script a shot. It would require a little more up front work, but seems as if it would be pretty solid after that.
Thanks again for helping me think it through -
How can I determine where to publish each comment in my website?
How can I determine where to publish each comment in my website?
I have one form for the comments, but I want to show them in different webpages depending on the user choice
for example, I created 6 pages blue circle, pink circle, green circle, blue square, pink square, and green square,so the user chooses pink or blue or green from one menu and circle or square from another menu which determine which page it will be displayed on.
you can see the form on the bottom of this website www.assori.com
thanks for any helpIt's my fault, I lost you there.
See I wrote the steps as they were in "Adobe Help" so please forget about the last comment.
I chose the "advanced mode" because I have more than one menu to filter (shape and color)
lets say I want the comments on my website to be displayed conditionaly, and I have two lists one for colors (blue and pink) and other for shapes (square and circle),
So I'm going to have four pages each page has its own recordset, let's say now I want to filter the recordset for (Blue Circle) page
I don't know how to do it but by following the steps in Dreamweaver help:
-Select name, and click the Select button.
-Select content, and click the Select button.
-Select shape, and click the Where button.
-Select section, and click the Where button.
-Select time, and click the Order By button.
this is how the SQL statement look likes:
SELECT mytable.name, mytable.contents
FROM mytable
WHERE mytable.shape='circle' AND mytable.`section`='blue'
ORDER BY mytable.hdw_serverTime
then to Define the variables 'circle' and 'blue' :
by clicking the Plus (+) button in the Variables area and entering the following values in the Name, Default Value, and Run-Time Value columns:
circle,square,Request("circle")
blue,blue,Request("blue")
Also I understand that I have to define a parameter but which (URL or Form) and how? I don't know
Maybe you are looking for
-
How do I resolve this related Ical message? The server responded with "400" to operation CalDAVUploadDropBoxFileQueueableOperation.
-
How to populate multi-cluster arrays using matlab code?
Hi, I have an array of clusters containing two 'Double' elements in each cluster. I am looking for a method to populate this array using MATLAB code. I need around 1000 clusters in the array, so populating it using the front panel is not practical. T
-
Can i put a intel based hard drive in my ibook g4?
Im wondering if its possible to install a intel based hard drive in my ibookg4,and am wondering if it would be more reasonable to do that instead of buying a completely new computer.Any websites you could show me,or info you could give me would help
-
Pixel-Positions in XML-Element attributes
hi, is there a way, when attaching a xml-tag to e.g. a picture, that the top and left pixel value is saved in a xml-element attribute? the pixel value from top and from the left. thanks in advance. regards.
-
Upgraded to OS X 10.9 and Cannot connect to Canon Imagrunner 3245i
I upgraded from OS X 10.7 to 10.9 and now I cannot connect to the networked Canon Imagerunner 3245i in my office. I've looked on Canon's website and can't find a new driver, website says there isn't one. This happened before when I upgraded system so