How can I determine the WSDL URL for an Enterprise Service defined in ECC
I have an Enterprise Service that is defined in ECC and I can see the function definition for it via transaction code se80, ABAP Development Workbench. However when I open up the Service Definition for the Function and click on the WSDL tab the URL I see is not correct.
How do I find the proper Enterprise Service WSDL URL?
Sam
PS: Posted on behalf of some colleagues...
I wonder if someone from Exton knows the answer???
Will someone please tell me this so I can give them points:
First you have to call transaction SOAMANAGER in your ECC system. It will then open up a new browser window. Then select the Single Service Administration link and a new screen will open. Then search and select your WebService and press the Apply Selection button. Then you can select the wsdl from the grid below. If no wsdl was previous created you can Create a New Endpoint which will generate one. The browser window that opens up will have the WSDL URL set in the Address bar.
Sam
Similar Messages
-
How can I determine the feeder class for a WebDynpro component in SRM 7.0?
Hi experts.
I am trying to figure out how to add some columns to the list of contract items for this WebDynpro application/view:
Applikation: /SAPSRM/WDA_L_FPM_OIF
Web Dynpro-komponent: /SAPSRM/WDC_CTR_DOTC_IT
Window: IV_L_FPC_CA_TREE
View: V_CTR_DODC_ITEMS
Configuration-ID: /SAPSRM/WDCC_FPM_CTR_DOTC_ITM
All the documentation I can find regarding the FPM says to change the feeder class, but nowhere I have seen do they explain how to determine the feeder class of an existing component/view.
I am hoping for your help!
Thanks!
Best regards
Per Hjorth ChristiansenThe term "feeder class" normally refers to the POWL search, not the actual document detail screen. You could just add one more column by enhancing the webdynpro view.
-
How can I change the default URL in hyperlink inspector
How can I change the default URL for link to external page in the Hyperlink Inspector?
You can't change the default url in the inspector.. but an easier way to do it rather than editing the box everytime you need to build a link is to copy the url you want to link to and then highlight the text or image that users will click on and then click enable hyperlink.. when you do that whatever the last url you copied using "command" "C" will automatically be entered into that box and replace "livepage.apple.com"
It saves alot of time if you are doing alot of links.
Hope This Helps! -
Hello,
I am at my wits end into this. Either I am doing it the wrong way or it is not possible.
Let me explain. I need a vb script for the following scenario:
1. The script is to run on multiple Windows 7 machines (32-Bit & 64-Bit alike).
2. These are shared workstation i.e. different users login to these machines from time to time.
3. The objective of this script is to traverse through each User Profile folder and get the size of the 'My Documents' folder within each User Profile folder. This information is to be written to a
.CSV file located at C:\Temp directory on the machine.
4. This script would be pushed to all workstations from SCCM. It would be configured to execute with
System Rights
I tried the script detailed at:
http://blogs.technet.com/b/heyscriptingguy/archive/2005/03/31/how-can-i-determine-the-size-of-the-my-documents-folder.aspx
Const MY_DOCUMENTS = &H5&
Set objFSO = CreateObject("Scripting.FileSystemObject")
Set objShell = CreateObject("Shell.Application")
Set objFolder = objShell.Namespace(MY_DOCUMENTS)
Set objFolderItem = objFolder.Self
strPath = objFolderItem.Path
Set objFolder = objFSO.GetFolder(strPath)
Wscript.Echo objFolder.Size
The Wscript.Echo objFolder.Size command in the script at the above mentioned link returned the value as
'0' (zero) for the current logged on user. Although the actual size was like 30 MB or so.
I then tried the script at:
http://www.experts-exchange.com/Programming/Languages/Visual_Basic/VB_Script/Q_27869829.html
This script returns the correct value but only for the current logged-on user.
Const blnShowErrors = False
' Set up filesystem object for usage
Set objFSO = CreateObject("Scripting.FileSystemObject")
Set objShell = CreateObject("WScript.Shell")
' Display desired folder sizes
Wscript.Echo "MyDocuments : " & FormatSize(FindFiles(objFSO.GetFolder(objShell.SpecialFolders("MyDocuments"))))
' Recursively tally the size of all files under a folder
' Protect against folders or files that are not accessible
Function FindFiles(objFolder)
On Error Resume Next
' List files
For Each objFile In objFolder.Files
On Error Resume Next
If Err.Number <> 0 Then ShowError "FindFiles:01", objFolder.Path
On Error Resume Next
FindFiles = FindFiles + objFile.Size
If Err.Number <> 0 Then ShowError "FindFiles:02", objFile.Path
Next
If Err.Number = 0 Then
' Recursively drill down into subfolder
For Each objSubFolder In objFolder.SubFolders
On Error Resume Next
If Err.Number <> 0 Then ShowError "FindFiles:04", objFolder.Path
FindFiles = FindFiles + FindFiles(objSubFolder)
If Err.Number <> 0 Then ShowError "FindFiles:05", objSubFolder.Path
Next
Else
ShowError "FindFiles:03", objFolder.Path
End If
End Function
' Function to format a number into typical size scales
Function FormatSize(iSize)
aLabel = Array("bytes", "KB", "MB", "GB", "TB")
For i = 0 to 4
If iSize > 1024 Then iSize = iSize / 1024 Else Exit For End If
Next
FormatSize = Round(iSize, 2) & " " & aLabel(i)
End Function
Sub ShowError(strLocation, strMessage)
If blnShowErrors Then
WScript.StdErr.WriteLine "==> ERROR at [" & strLocation & "]"
WScript.StdErr.WriteLine " Number:[" & Err.Number & "], Source:[" & Err.Source & "], Desc:[" & Err.Description & "]"
WScript.StdErr.WriteLine " " & strMessage
Err.Clear
End If
End Sub
The only part pending, is to achieve this for the 'My Documents' folder within each User Profile folder.
Is this possible?
Please help.Here are a bunch of scripts to get folder size under all circumstances. Take your pick.
https://gallery.technet.microsoft.com/scriptcenter/site/search?query=get%20folder%20size&f%5B0%5D.Value=get%20folder%20size&f%5B0%5D.Type=SearchText&ac=2
¯\_(ツ)_/¯ -
I have a friend who is not very savvy with computers. He works on a PC. (There may be versions for pc OS versions) I use a Mac-your website will not show the PC pages to me. How can I find the proper URL to embed in a button?
Try going to the following
Tools->Web Developer-> Page Source.
You can also access this by way of keyboard shortcut Ctrl + U
The View Page Source option is also available via the right-click menu by just right-clicking inside the page window & it will be the penultimate menu item. -
How to find the WSDL URL for my deployed portlet
Hello,
I do not find the WSDL URL for my deployed portlet. I deployed a Portlet correctly with JDeveloper to a remote Oracle AS.
In the tutorial they write:
"Now use the URL provided in the log page at the bottom of JDeveloper to get part of your URL (e.g. http://myserver.uk.oracle.com:8888/my-portlet) and complete the URL.
http://myserver.uk.oracle.com:8888/my-portlet/portlets?WSDL
Now use this URL to register your portlet with OracleAS Portal."
But in the log there is nothing like this! The log ends like this:
"DCM command completed successfully.
Output:
Exit status of DCM servlet client: 0
Elapsed time for deployment: 13 seconds
---- Deployment finished. ---- 11-Mar-2006 12:26:58"
Can anyone tell me where to finde the WSDL Url?
Thank you.OK I think that I found a quick workaround for this issue. Creating a redirection URL using the parameter icm/HTTP/redirect_<xx> works for me.
Parameter:
icm/HTTP/redirect_0 (Value '0' may differ for your system)
Value:
PREFIX=/ws1, TO=/sap/bc/srt/wsdl/srvc_08002720027F1EE3AEAAFED3B5688C63/wsdl11/allinone/ws_policy/document?sap-client=001
Now the WSDL URL can be reached at
http://was730.dvlopr.com:8000/ws1
Tested!
Best regards -
How can I determine the type of video out connector I need?
Howdy,
I have a white macbook purchased Jun/2008. I want to connect to a TV but don't know what adapter I need. How can I determine the type of video out jack my macbook has?
System Profiler says the model identifier is "MacBook 4,1". Under Graphics/Displays the only thing it says about the "Display Connector" is that no display is connected. Too bad it doesn't tell me what type of connector it is. If I knew the name of the connector I'd probably be home free. But it seems like every macbook model has a different video connector (since the state of the art has advanced over the years) and I haven't been able to keep up with the names.
Now, I have a 6" long adapter that will convert this connector to VGA. And searching the Apple store for VGA adapters, the existence of mine says my connector is might be one of "Mini DisplayPort", "Apple Mini DVI", "Apple DVI", or "Apple Micro-DVI". But then there is also the connector at
http://store.apple.com/us/product/M8639G/A?mco=MTY3ODQ5OTY
and that looks like the one I have. But unlike the other adapters, this one is just called a "VGA Display Adapter". Does the connector have a name? How can I find adapters that have that same connector?
I know I could use the adapter I have, plus a VGA to VGA cable, to hook up to a TV. But the quality of the VGA signal is poor in the digital world. My goal is to hook up to the TV via HDMI. Is this even possible? By which I mean, will my macbook generate the signals necessary to be able to be converted to HDMI?
Thanks for any help,
Zebulon TThanks, Ded,
You're right, the cable that I have won't work. I't from my previous, 2004 iBook. This is pretty embarrassing... I looked at the cable but didn't bother to try plugging it in.
Looking at the close-up picture of the Mini-DVI to VGA adapter, that does look like the right connector. So I have Mini-DVI, and the other apter you pointed to can convert this to DVI. I'll take a look to see what makes the most sense, connector wise, downstream from that.
Thanks very much.
Zeb T -
How can i set the alternating colors for a table rows
Dear All,
Please any one help me how can i set the Alternating colors for Table Rows.
i created a theam there i set the background alternating color to brown and i set the table design properity to alternating. but it is not reflecting.Hi,
The design property in Table properties should work for your requirement. Select "alternating" value for design.
Please see the API below:
design
Determines the appearance of the table. The property design can take the following values and is represented by enumeration type WDTableDesign.
alternating - The table rows are displayed alternately in a different color.
standard - The table background has one color. The individual table rows are displayed with grid net lines.
transparent - The table background is transparent. The individual table rows are displayed without grid net lines.
Check whether you have changed the right property or not? Also table should contain more than one rows to test this scenario.
Regards,
Jaya.
Edited by: VJR on Jun 17, 2009 6:43 PM -
How can I determine the number and sizes of redologs?
Dear all,
How can I determine the number and sizes of redologs are sufficient to allow redo log switching while hot backup is in progress?
Please advice,
AmyTwo questions here - what the OP put as the subject title and what was asked in the thread, which are different questions.
I would interpret the question in the thread to mean "how to avoid hanging due to archiving waiting for a redo log group to become available." Alert log, wait events, and user complaints would be the source of information here. -
C Programming: How can we get the filesystem name for a given file-path?
C Programming: How can we get the filesystem name for a given file-path?
Say I have a filepath=/mnt1/file1
Using some OS API like stat, can I get the Filesystem /mnt ?
Thanks in advance,
-VEnter the command up to the point of entering the file path and add a space, then drag the file into the terminal window. It will fill out the path.
If you need to go further into the contents of the Application package, you can continue with /Contents...
Another way is to start typing and then hit Tab to auto-complete. It will stop where it can't determine the next letter.
So, type /App tab and it will fill in /Applications. Type a / and start with the name of the app, then tab and it should complete. Continue till you have the correct path.
Spaces will be replaced with \<space>, so, App Store would end up as /Applications/App\ Store.app -
How can we modify the distination url while migrate the personalization
Hi All,
I got the requirement to create a link in iSupplier home page. I have created the link using oa framework personalization and set the destination URL with the third party's test instance URL. It is available in test instance and the third party url is also the test instance url . I have to move this personalization to production. In production the same link has to open the third party's prod instance only. But i am little bit confused, how can we modify the detsination url in the personalizaed the document.
Please suggest me if there is any generic way of modifying the link url while migrating the personalization from one instance to another instance.
Thanks in Advance..
Regards,
PurushothHi,
---Its nt possible via personalization go for co extension
Im not sure but pls try with below approach.
---In co get the webBean of OALinkBean and setDestination URL in code.
if(Prod)
setdestinationURL("");
if(Testing)
setDestinationURL("");
Regards
Meher Irk -
How can I determine the cipher bit strength used by MY os X?
How can I determine the cipher bit strength used by MY OS X? Using Lion now?
CT:
Not Filvault, but the regular cryptographic use as built into OS X. For example 1Password uses the algorithm in the OS X's Linux. How many bits (i.e. 50, 128, 256...) does it use and what algorithm (DES, AES...)
Linc
As per reply to CT?
Like so:
http://osxdaily.com/2012/01/30/encrypt-and-decrypt-files-with-openssl/
What is the strength used? -
How can I get the elapse time for execution of a Query for a session
Hi ,
How can I get the elapse time for execution of a Query for a session?
Example - I have a report based on the procedure ,when the user execute that it takes say 3 min. to return rows.
Is there any possible way to capture this session info. for this particular execution of query along with it's execution elapse time?
Thanks in advance.Hi
You can use the dbms_utility.get_time tool (gives binary_integer type value).
1/ Initialize you time and date of beginning :
v_beginTime := dbms_utility.get_time ;
2/ Run you procedure...
3/ Get end-time with :
v_endTime := dbms_utility.get_time ;
4/ Thus, calculate elapsed time by difference :
v_elapsTime := v_endTime - v_beginTime ;
This will give you time elapsed in of 100th of seconds...
Then you can format you result to give correct print time.
Hope it will help you.
AL -
Whenever I update my iPhone software, it asks me to sign in to iCloud with an old email address. My other devices all have the correct address. How can I get the correct address for my iPhone? The only Apple ID that works for logging in is my new one.
To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iPhone (if you're using iOS 7), then sign back in with the ID you wish to use. If you don't know the password for your old ID, or if it isn't accepted, go to https//appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Tap edit next to the primary email account, tap Edit, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.
-
How can I activate the transfer rules for the ODS updating a data target.
We are on BW 3.5 and I'm loading data into the 0FIGL_O10 ODS and then uploading the data into the cube 0FIGL_C10. The data loads just fine to the ODS but when I try to <u><b>'update the data target'</b></u> I get a date & time stamp' error on the info-package transfer rules.
I then Replicate the datasource 80FIGL_O01.
I must then <u><b>'activate' the transfer rules</b></u>.
However I cannot get the transfer rules for 80FIGL_O10 in CHANGE MODE to activate them.
How can I activate the transfer rules for the ODS updating a data target.
The error text is as follows:
DataSource 80FIGL_O10 has to be replicated (time stamp, see long text)
Message no. R3016
Diagnosis
DataSource 80FIGL_O10 does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 02/15/2007 10:42:33.
The time stamp in the BW system is 11/07/2006 13:11:54.
System response
The load process has been terminated.
<b>Procedure
Copy the DataSource again and then activate the transfer rules that belong to it. You have to activate the transfer rules in every case, even if they are still active after the DataSource has been copied.</b>
Thanks for your assistance.
DennyHi Dennis,
Try, using Business Content to activate your data source
hope this will help you
How activate business content?
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm
Maybe you are looking for
-
Vendor Bank account details not appearing in DME file
Hi SAP gurus, We have maintained bank information for vendor in the master record and also configured the field FPAYH-ZBNKN in the DME structure to retrieve bank information and pass to the DME file.However the values are not passing to the DME outpu
-
How to move from one page to another page
hi all we have a report,in that if i click on user name he has to go to another page, in that page i have created one prompt and one report ,there he has to select groups(prompt) and in that page only he has to see the report how to provide like to p
-
Hi, Am working on a Mapping that requires a delte insert functionality. That is, the rows in target matching a specific column should only be deleted. So, modified loading type to delete/insert, match by constraints to none, and then set match column
-
IPhoto doesn't see new photos in iPhone
Trying to import new photos from my iPhone. iPhoto doesn't see them. I tried quitting both things, but still doesn't see them - now what? Using iPhoto 9 - version 8.1.2 iPhone version 3.1.3
-
Lumia Black Update Notification for my L920(India)...
Hi, I am from India and using Nokia Lumia 920 brought in India itself but I am not getting the Lumia Black Update Notification. Can anyone please help me how to get the update notification.. Do I need to tweak any settings to get the notification? An