How can I determine what is contained in "other" data

I just tried to re-sync my wifes ipod, touch, but I got a warning message saying that i didn't have enough available space. It has approx 14gb of capacity, and she only has about 7gb of music.
The capacity bar graph at the bottom of the itunes sync page indicates 7.16gb of audio, and 7.65gb of "other".
I have already unchecked the boxes for syncing movies, tv shows, podcasts, photo's, etc. - - and none of that content is on the ipod.
How do I find out what "other" is, and how do I kill it?
Thanks in advance for any helpful thoughts and suggestions,
Mike
P.S. I just downloaded a comedy central tv show, and one of the albums I just bought contained a music video - but none of that is on the ipod.

Sometimes your iPod swallows something and forgets it has music on it, but without erasing it. So it sounds like the music is on there twice.
To fix it, try erasing all the music, then resync, if that doesn't work do a restore, that should get Other back to <200 MB
Hope this helps.

Similar Messages

How can we determined what role contains a particular privilege.

Hi All.
How can we determined what role contains a particular privilege.???
I have found note User Management (UMX) Security Infrastructure Reporting (Doc ID 1222663.1)
Our implementation doesn't seem to have a "UMX_W3H_HOMEPAGE / W3H Homepage Permission Set"
This is a R12.0.4 instance
Thanks in advance

How can we determined what role contains a particular privilege.???User Management Responsibility > Roles & Role Inheritance > Search for the Role > Click on Edit and you will find the list of Permissions.
I have found note User Management (UMX) Security Infrastructure Reporting (Doc ID 1222663.1)
Our implementation doesn't seem to have a "UMX_W3H_HOMEPAGE / W3H Homepage Permission Set"
This is a R12.0.4 instanceAccording to (How to Assign User Management Security Reports to a User [ID 1221304.1]), it is available in 12.1.1 and above.
Thanks,
Hussein

How can I determine what is stored under "other" on my iphone

When I synch my iPhone 4S, there is a fair amount of memory tied up in "other", but I don't know what is in there. How can I see and manage what is being stored in "other"?

Its going to continue to happen,
You can do a restore using iTunes which will remove a big chunk of the Other stuff. It also includes things like email, and apps that didn't download properly.
I did a restore as new and then loaded my apps, music, etc and got back a couple gigs of room.
the easies thing you can do is not to keep too much email saved on your phone. I only keep a couple of weeks back and that saves me a lot of room. I can always get on a computer and log into my email accounts if I need something older than that.

When I upgraded from v4 to v5 my bookmarks was lost. I do have the one that is in the firefox toolbar. Apparently I had a bookmarks add-on. V5 changed my browser how can I determine what the program was and if the bookmarks are still there?

When I upgraded from v4 to v5 my bookmarks was lost. I do have the one that is in the firefox toolbar. Apparently I had a bookmarks add-on. V5 changed my browser how can I determine what the program was and if the bookmarks are still there?

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Websites remembering you and automatically log you in is stored in a cookie.
*Create an allow Cookie Exception to keep such a cookie, especially for secure websites and if cookies expire when Firefox is closed.
*Tools > Options > Privacy > Cookies: Exceptions
In case you are using "Clear history when Firefox closes":
*do not clear Cookies
*do not clear Site Preferences
*Tools > Options > Privacy > Firefox will: "Use custom settings for history": [X] "Clear history when Firefox closes" > Settings
*https://support.mozilla.org/kb/Clear+Recent+History
Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.
Clearing cookies will remove all specified (selected) cookies including cookies that have an allow exception and cookies from plugins.

How can I determine what computers are home sharing??

How can I determine what computers are home sharing??

Launch iTunes on the computers you're interested in. Check in the "Advanced" menu.
If "Turn on Home Sharing" is listed as an option, the iTunes library that you have open is not Home Sharing.
If "Turn off Home Sharing ([accountname]) is listed as an option, the iTunes library that you have open is Home Sharing.

I've got an old I-phone. How can I determine what model it is? 3 or 4.

I've got an old I-phone. How can I determine what model it is? 3 or 4.

Append the last three characters of its serial number to http://www.everymac.com/ultimate-mac-lookup/?search_keywords= and load the page.
(104117)

How can I determine what computers are authorized on my iTunes account?

How can I determine what computers have been authorized on my iTunes account? I've reached my limit and now I'd like to deauthorize one computer.
Thanks,
Jerry

There is no list.
You can only deauthorize a single computer from that computer.
If you do not have access to the computers, then you would have to deauthorize all.

How can I determine what dns server the wifi client use within airport

How can I determine what dns server the wifi client use within airport
I want to use dns servers other then the one that airport extreme is using. For example I got the 172.16.1.1 (the default gateway - airport extreme), but I want to use the office dns servers, that are in a 10.x.x.x range.
Is there a possibility?
Thanks and happy eastern

The Airport Extreme uses the DNS servers assigned by the network that it connects to. Is you Airport Extreme on the 10.x.x.x network? if it is then you are already using the 10.x.x.x DNS servers. Check your Airport Extreme with the Airport Utility and you will see in the Internet tab, the DNS servers used. The devices connecting to the Airport Extreme are assigned a DNS address of the Airport Extremes IP, In your case 172.16.1.1 but all DNS searches and resolution are done with the DNS servers you see in the Airport Extreme.
If you want to use some other DNS then you can override in the Airport Extreme which will be used by all devices connecting too the Airport Extreme, Or you can edit the DNS address in each devices wireless settings.

I can't shut down my MacBook Pro. I'm getting the following message: "The Finder can't quit because some operations are still in progress." How can I determine what is running?

I can't shut down my MacBook Pro. Each time I try, I get the following message: "The Finder can't quit because some operations are still in progress." How can I determine what is running?

Yea,
I bought an original CRT iMac two day's before they were launched, which got the reseller into trouble, and had it replaced by APPLE.
This was a great learning process for me dealing with the glitches. :-)
I LOVE MAC. Now own 4 and on my 10th. in 15 years + 7 bought for family.
Cheers,
Tom

How can I determine what is using my broadband?

I have limited broadband (not uncapped) but something is chewing up my available data at an alarming rate. How can I determine what it is and how to stop it?

You should be able to click on the one item, and then
select Info, to see what else is involved w/ this kernel.
And check the Console utility, to see what (among so
many) specific items may relate to the use of internet.
Items by Time & Date narrow the field somewhat.
Good luck & happy computing!

How can I determine what LLB a VI is being loaded from?

I've been frustrated switching between versions when an application opens and suddenly can not find a VI which is being loaded from a LLB. How can I determine what LLB (or other type of library) a VI is being loaded from ?
Is there a list of all libraries along with what VIs are included in them somewhere?
Thanks,
Dave

In the context help, enable "Show Optional Terminals and Full Path ", then just hover over your VI, either on the diagram on in the hierarchy view.
LabVIEW Champion . Do more with less code and in less time .

How can i determine what the most recent os my imac will run?

How can i determine what the most recent os my iMac will run?
Serial Number QP6*****VUW
Processor 2.16 GHz Intel Core 2 Duo
Currently running Version 10.5.8
<Edited by Host>

You CAN run 10.7, but I don't advise it, buy the 10.6.3 upgrade disk from the Apple Store online and then backup files off the machine and upgrade to 10.6.3., then Software Update to 10.6.8 would be the BEST option for your older hardware and it will run most all of your 10.5 software and be faster than 10.5 or 10.7.
If you go to 10.7 it won't run nearly any of your 10.5 software and you will have to buy all new ones for a machine that's getting a little bit dated, near it's end of life stage. 10.7 will slow your machine down, especially with low RAM.
http://roaringapps.com/apps:table
At your machines stage, the hard drive is getting old, the vents are clogged up with dust and it's going to cost a bit to get the drive etc upgraded. You can if you wish, but 10.7 really needs more RAM (4GB) and a faster hard drive.
But your still subjected to the video card going out etc.
IMO upgrade to 10.6.8 and stay there until the wheels fall off, then buy a new 10.8 machine being released after this summer or 10.9 machine.
Harden your Mac against malware attacks

How can I determine what is the minimum SCN number I need to restore up to.

Say if I have a full database backup, I know I have file inconsistency, but I want to know what is the minimum time or SCN number a need to roll forward to in order to be able to open the database?
For example: I do a database restore.
restore database ;
RMAN> sql 'alter database open read only';
sql statement: alter database open read only
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of sql command on default channel at 03/16/2009 15:00:04
RMAN-11003: failure during parse/execution of SQL statement: alter database open read only
ORA-16004: backup database requires recovery
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: '/u01/oradata/p1/system01.dbf'
I need need to apply archive log files. All references I find for ORA-00194 state the solution is to "apply more logs until the file is consistent " But "HOW MANY LOGS", or more apporaite up to what time or SCN? How does one determine what TIME or SCN is required to get all file consistent?
I thought this query might provide the answer, but it doesn't
select max(checkpoint_change#)
from v$datafile_header
MAX(CHECKPOINT_CHANGE#)
7985876903
--It applies a bit more redo, but not enough to make my datafiles consistent.
recover database until SCN=7985876903 ;
Starting recover at 03/16/09 15:04:54
using channel ORA_DISK_1
using channel ORA_DISK_2
using channel ORA_DISK_3
using channel ORA_DISK_4
using channel ORA_DISK_5
using channel ORA_DISK_6
using channel ORA_DISK_7
using channel ORA_DISK_8
starting media recovery
channel ORA_DISK_1: starting archive log restore to default destination
channel ORA_DISK_1: restoring archive log
archive log thread=1 sequence=18436
channel ORA_DISK_1: reading from backup piece /temp-oracle/backup/hot/p1/20090315/hourly.arch_P1_47353_681538638_1
channel ORA_DISK_1: restored backup piece 1
piece handle=/temp-oracle/backup/hot/p1/20090315/hourly.arch_P1_47353_681538638_1 tag=TAG20090315T041716
channel ORA_DISK_1: restore complete, elapsed time: 00:02:26
archive log filename=/u01/app/oracle/flash_recovery_area/P1/archivelog/2009_03_16/o1_mf_1_18436_4vxd81yc_.arc thread=1 se quence=18436
Oracle Error:
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: '/u01/oradata/p1/system01.dbf'
I've discover I need to apply archive logs until this query reports all datafiles as FUZZY=NO , but this only works by guessing at some time periord to roll forward to, then checking the FUZZY column, and try again. Is there a way to know, I have to roll forward to a specific SNC in order for all my datafiles to be consistent?
select file#
     , status
     , checkpoint_change#
     , checkpoint_time
     , FUZZY
     , RECOVER
,LAST_DEALLOC_SCN
from v$datafile_header
order by checkpoint_time
Thanks,
Jason

The minimum point in time is the time when the last backup piece for datafiles in that backup was completed.
Your alert.log should show the redo log sequence number at that time.
You can query V$ARCHIVED_LOG and get the FIRST_CHANGE# of the first archivedlog generated after that backup piece completed.
A
LIST BACKUP;in RMAN should also show you the SCNs at the time of the backups.
You can also query SCN_TO_TIMESTAMP -- eg
select timestamp_to_scn(to_timestamp('15-MAR-09 09:24:01','DD-MON-RR HH24:MI:SS')) from dual;will return an approximation of the SCN.
Hemant K Chitale
http://hemantoracledba.blogspot.com
Edited by: Hemant K Chitale on Mar 17, 2009 9:41 AM
added the LIST BACKUP command from RMAN.

How can I determine what sites are being referenced within Central Admin Upgrade and Migration Manage Databases Upgrade Status?

When I go to Central Admin > Upgrade and Migration > Manage Databases Upgrade Status, I have 2 content databases which have the status:
Database is up to date, but some sites are not completely upgraded.
How can I determine which sites are not completely upgraded?

Manage Databases Upgrade Status will provide you all active and offline DB details, you can get same result
using below PowerShell cmdlet.
Get-SPDatabase and Get-SPContentDatabase will provide all active database/Content DB in Farm which include Service application db, central admin DB.
Get-SPDatabase | Format-Table Name, ID
Coming back to your question, if you find that there are some site are not completely upgraded then run below command and understand the cause if issue on specific DB.
Test-SPContentDatabase WSS_ContentDB_Name
If you find any missing file issue in DB then resolve these issue to upgrade content database.
(verify all customizations referenced within the content database are also installed in the web application. This cmdlet can be issued
against a content database currently attached to the farm, or a content database that is not connected to the farm )
Use the Upgrade-SPContentDatabase cmdlet
to resume a failed database upgrade or begin a build-to-build database upgrade against a SharePoint content database
Upgrade-SPContentDatabase WSS_Content
reference:
http://technet.microsoft.com/en-us/library/ff607813(v=office.15).aspx
http://technet.microsoft.com/en-us/library/ff607941(v=office.15).aspx
If my contribution helps you, please click Mark As Answer on that post and
Vote as Helpful
Thanks, ShankarSingh(MCP)

How can I determine what app is using my megabytes so fast?, How can I determine what app is using my megabytes so fast?

How can I determine which apps are using my megabytes so fast

Thank you . That answers my question,but I guess I need to know how to identify the usage for email and Internet. I'm thinking we may have an issue with our wifi at home going in and out. I guess my son should turn off his cellular when he is home for this reason?

How can I determine what is contained in "other" data

Similar Messages

Maybe you are looking for