How can I determine what machines have Offline Sync running and are using it

Hi everyone,
I am working on a project where a Windows feature was rolled out but we do not know to whom exactly?
I need to run a script that will tell me for all the machines/PCs in our estates which ones are actually using the Offline Files/Sync Center in Windows 7.
Is there a way to do this via Reporting? I'm actually using SCCM 2012 SP1 but there was no option for this in the drop-down.
If anyone has any samples or scripts - that I could utilise then I would appreciate this.
Thanks

Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
A Quick Bing search revealed several scripts that will allow you to determine offline data. I would start with one of those then, write the results to WMI. Once that is done CM12 can inventory the results and you can then create a report in this data.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Similar Messages

  • How can I determine which machines have activated Adobe Acrobat Standard 9?

    How can I determine which machines have activated Adobe Acrobat Standard 9?

    Hi jrector3,
    You need to go to the respective machines and launch Acrobat and check if it prompts for serial number.
    You can also go to the help menu and check if 'Deactivate' option is highlighted.
    Regards,
    Rave

  • How can i determine what vectors have been used for TTLTRIG0?

    hi! I'm programing the application in vxworks OS.The application can obtain interrupt from TTLTRIG0-TTLTRIG8. Wish to receive your help! thank you very much!
    regard you!

    Hi Zhongzheng,
    I'm not quite sure what you mean by vectors. Are vectors specific to VXWorks? Are you trying to figure out which instrument is causing an interrupt or asserting the trigger? Are you trying to determine which trigger line has been asserted? Please clarify your question and provide more details, I'll try to find an answer for you.
    Regards,
    David Shatila
    Applications Engineer
    National Instruments

  • How can I determine what speed my ram is running at?

    ?

    Quote from: Aevum on 29-July-05, 11:31:55
    lavalys everest, sisoft sandra, memtest86, and the list goes on,
    but the best was is to check the writing that comes up during post (that screen that shows just as you turn on the machine that says processor and  memory speeds
    It says 201 mhz is this okay?

  • How can I determine what computers are authorized on my iTunes account?

    How can I determine what computers have been authorized on my iTunes account?  I've reached my limit and now I'd like to deauthorize one computer.
    Thanks,
    Jerry

    There is no list.
    You can only deauthorize a single computer from that computer.
    If you do not have access to the computers, then you would have to deauthorize all.

  • When I upgraded from v4 to v5 my bookmarks was lost. I do have the one that is in the firefox toolbar. Apparently I had a bookmarks add-on. V5 changed my browser how can I determine what the program was and if the bookmarks are still there?

    When I upgraded from v4 to v5 my bookmarks was lost. I do have the one that is in the firefox toolbar. Apparently I had a bookmarks add-on. V5 changed my browser how can I determine what the program was and if the bookmarks are still there?

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    Websites remembering you and automatically log you in is stored in a cookie.
    *Create an allow Cookie Exception to keep such a cookie, especially for secure websites and if cookies expire when Firefox is closed.
    *Tools > Options > Privacy > Cookies: Exceptions
    In case you are using "Clear history when Firefox closes":
    *do not clear Cookies
    *do not clear Site Preferences
    *Tools > Options > Privacy > Firefox will: "Use custom settings for history": [X] "Clear history when Firefox closes" > Settings
    *https://support.mozilla.org/kb/Clear+Recent+History
    Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.
    Clearing cookies will remove all specified (selected) cookies including cookies that have an allow exception and cookies from plugins.

  • TS1550 Do external hard drives mounted on my Mac get backed up by time machine on a time capsule wireless Apple external back up disk? How can I see what folders have been actually stored in the wireless back up disk?

    Do external hard drives mounted on my Mac get backed up by time machine on a time capsule wireless apple external hard disk? How can I see what folders have been actually backed up in the external wireless disk? any help would be appreciated

    They can provided you remove them from the Exclude list. Normally, Time Machine does not automatically backup external drives.

  • How can i determine what the most recent os my imac will run?

    How can i determine what the most recent os my iMac will run?
    Serial Number QP6*****VUW
    Processor 2.16 GHz Intel Core 2 Duo
    Currently running Version 10.5.8
    <Edited by Host>

    You CAN run 10.7, but I don't advise it, buy the 10.6.3 upgrade disk from the Apple Store online and then backup files off the machine and upgrade to 10.6.3., then Software Update to 10.6.8 would be the BEST option for your older hardware and it will run most all of your 10.5 software and be faster than 10.5 or 10.7.
    If you go to 10.7 it won't run nearly any of your 10.5 software and you will have to buy all new ones for a machine that's getting a little bit dated, near it's end of life stage. 10.7 will slow your machine down, especially with low RAM.
    http://roaringapps.com/apps:table
    At your machines stage, the hard drive is getting old, the vents are clogged up with dust and it's going to cost a bit to get the drive etc upgraded. You can if you wish, but 10.7 really needs more RAM (4GB) and a faster hard drive.
    But your still subjected to the video card going out etc.
    IMO upgrade to 10.6.8 and stay there until the wheels fall off, then buy a new 10.8 machine being released after this summer or 10.9 machine.
    Harden your Mac against malware attacks

  • How can I determine what computers are home sharing??

    How can I determine what computers are home sharing??

    Launch iTunes on the computers you're interested in. Check in the "Advanced" menu.
    If "Turn on Home Sharing" is listed as an option, the iTunes library that you have open is not Home Sharing.
    If "Turn off Home Sharing ([accountname]) is listed as an option, the iTunes library that you have open is Home Sharing.

  • How can I determine what is using my broadband?

    I have limited broadband (not uncapped) but something is chewing up my available data at an alarming rate. How can I determine what it is and how to stop it?

    You should be able to click on the one item, and then
    select Info, to see what else is involved w/ this kernel.
    And check the Console utility, to see what (among so
    many) specific items may relate to the use of internet.
    Items by Time & Date narrow the field somewhat.
    Good luck & happy computing!

  • How can we determined what role contains a particular privilege.

    Hi All.
    How can we determined what role contains a particular privilege.???
    I have found note User Management (UMX) Security Infrastructure Reporting (Doc ID 1222663.1)
    Our implementation doesn't seem to have a "UMX_W3H_HOMEPAGE / W3H Homepage Permission Set"
    This is a R12.0.4 instance
    Thanks in advance

    How can we determined what role contains a particular privilege.???User Management Responsibility > Roles & Role Inheritance > Search for the Role > Click on Edit and you will find the list of Permissions.
    I have found note User Management (UMX) Security Infrastructure Reporting (Doc ID 1222663.1)
    Our implementation doesn't seem to have a "UMX_W3H_HOMEPAGE / W3H Homepage Permission Set"
    This is a R12.0.4 instanceAccording to (How to Assign User Management Security Reports to a User [ID 1221304.1]), it is available in 12.1.1 and above.
    Thanks,
    Hussein

  • I've got an old I-phone.  How can I determine what model it is?  3 or 4.

    I've got an old I-phone.  How can I determine what model it is?  3 or 4.

    Append the last three characters of its serial number to http://www.everymac.com/ultimate-mac-lookup/?search_keywords= and load the page.
    (104117)

  • How can I determine what dns server the wifi client use within airport

    How can I determine what dns server the wifi client use within airport
    I want to use dns servers other then the one that airport extreme is using. For example I got the 172.16.1.1 (the default gateway - airport extreme), but I want to use the office dns servers, that are in a 10.x.x.x range.
    Is there a possibility?
    Thanks and happy eastern

    The Airport Extreme uses the DNS servers assigned by the network that it connects to. Is you Airport Extreme on the 10.x.x.x network? if it is then you are already using the 10.x.x.x DNS servers. Check your Airport Extreme with the Airport Utility and you will see in the Internet tab, the DNS servers used. The devices connecting to the Airport Extreme are assigned a DNS address of the Airport Extremes IP, In your case 172.16.1.1 but all DNS searches and resolution are done with the DNS servers you see in the Airport Extreme.
    If you want to use some other DNS then you can override in the Airport Extreme which will be used by all devices connecting too the Airport Extreme, Or you can edit the DNS address in each devices wireless settings.

  • I can't shut down my MacBook Pro.  I'm getting the following message: "The Finder can't quit because some operations are still in progress." How can I determine what is running?

    I can't shut down my MacBook Pro.  Each time I try, I get the following message: "The Finder can't quit because some operations are still in progress."  How can I determine what is running?

    Yea,
    I bought an original CRT iMac  two day's before  they were launched, which got the reseller into trouble, and had it replaced by APPLE.
    This was a great learning process for me dealing with the glitches. :-)
    I LOVE MAC. Now own 4 and on my 10th. in 15 years + 7  bought for family.
    Cheers,
    Tom

  • How can I determine what LLB a VI is being loaded from?

    I've been frustrated switching between versions when an application opens and suddenly can not find a VI which is being loaded from a LLB.  How can I determine what LLB (or other type of library) a VI is being loaded from ? 
    Is there a list of all libraries along with what VIs are included in them somewhere?
    Thanks, 
    Dave 

    In the context help, enable "Show Optional Terminals and Full Path ", then just hover over your VI, either on the diagram on in the hierarchy view.
    LabVIEW Champion . Do more with less code and in less time .

Maybe you are looking for