How can I disable Broadband Talk

Signed up for Anytime Internet and calls, but when dialling out the hub phone uses the Broadband Talk number rather than the landline number which I'd like to use as I don't get charged on that line. Didn't ask for Broadband talk line for it to be the default one. Anyone know why this is and how I can disable it to use the landline number only? Thanks

copied from BT help pages
"To remove all Broadband Talk accounts:
Open an Internet browser window and type in http://bthomehub.home
When the BT Home Hub web page has loaded, click on the 'Advanced' link on the left hand menu.
The web page on the right will change. Click on the 'Continue to Advanced ...' link on this new page.
The BT Home Hub will ask you to enter your username and password. What is the username and password for my BT Home Hub or Voyager router?
On the left hand menu choose 'Telephony' and the right hand page will change.
On the new page scroll down until you see the heading 'Telephone Numbers'.
Below this heading you will see all the Broadband Talk numbers set up on your BT Home Hub. To clear the number from the BT Home Hub click on the 'Delete' link to the right of the Broadband Talk number. Repeat this until all the numbers are cleared.
Click on 'Apply' and close the Internet browser window.
You have successfully removed all of the Broadband Talk accounts from your Home Hub.
This will disable your broadband talk."
Alternatively you can dial "5" before each number, which will cause the call to default to your landline.
If you are never going to use the extra free number, then you ask BT to cease it.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Similar Messages

  • How can I disable Chat in v8.0? Or, at the least, say I'm offline so that some bimbo won't be wanting to talk to me every time I start FF?

    How can I disable Messenger Chat in v8.0? Or, at the least, say I'm offline so that some bimbo won't be wanting to talk to me every time I start Yahoo mail?
    Sorry, I somehow mis-posted this under Mail Filters the first time.

    I'm in Yahoo Mail v8.0. Options > Messenger Options offers four sub-menus: General, Appearance, Privacy, and Other. None of them offer an option to turn it off...which is ''exactly'' what I would love to be able to do!
    If I choose Options > Mail Options, I can likewise find nothing under it to disable Messenger. Earlier I could simply choose Offline and not be bothered by it. These days, though, FF changes versions faster than I change underwear. If I'm just missing it in either option menu, I'll surely apologize.
    Any other thoughts?

  • How can I disable the automatic hiding of known file attachments, and why are always about 10 internet pages where I have to download something if i use firefo

    How can I disable the automatic hiding of known file attachments, and why are always about 10 internet pages where I have to download something when I use mozila firefox?
    Windows Computer

    1) If you are talking about the file names on the computer, there is a
    setting to turn off known file types. Open your file browser. Then
    just under the location bar, press '''Tools,''' then '''Folder Options.'''
    A new window will open. Select '''View.''' Look for
    '''Hide Extensions For Known File Types.'''
    2) Never NEVER '''NEVER''' download anything unless you know what
    it is. If a web site claims it needs to download something, what is it?
    It could be something like the flash player, '''or a virus ! !'''
    Ask questions, or go somewhere else.

  • How can I disable the behance pics during the startup of my CC 2014 programmes?

    When I start my photoshop cc 2014 and illustrator and all other apps, there ware always some behance pics from users.
    is there a way to disable them?
    thanks a lot
    alex

    hi sarah,
    thanks for getting back to me.
    i mean these images:
    when the programmes are starting up…
    thanks a lot for your help
    alex
    Am 08.01.2015 um 16:05 schrieb SarahBehance1 <[email protected]>:
    How can I disable the behance pics during the startup of my CC 2014 programmes?
    created by SarahBehance1 in Behance - View the full discussion
    HI Alex - can you send a screenshot of what you're seeing? I'm not sure what you're referring to.
    Talk to you soon, thanks!
    If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7077548#7077548 and clicking ‘Correct’ below the answer
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7077548#7077548
    To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
    Start a new discussion in Behance by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.
    Alex an der Haas
    Art Direction
    // Die Goldkinder
    // Ausdenken und Machen.
    // Mollardgasse 85A / Stiege 3 / Top 142, 1060 Wien
    // Tel: +43 (0) 1 595.37.07
    // Mob: +43 (0) 699.816.366.31
    // http://www.diegoldkinder.at

  • How can I disable the light of my keyborad?

    Hello everybody!!! I wonder how can I disable the light from my keyboard. I just can change the colors in 4 differents ways but none of then can switch off the light of my keyboard. I have a GT70 2PC. Thanks for your time .

    you should be able to turn off and on with FN and + to turn on then FN and the - button i think it was to turn off the backlight it's on number pad area to the right you should see light form icon showing light is on and then another 1 that is showing it's off
    here is pic of marked buttons that i'm talking about.

  • How can I disable the new voice feature in iMessage?

    iMessage is great and I use it a lot, but I hate the new voice feature. I don't want anyone to be able to send me a voice message. I think it's extremely pushy. If someone wants to talk to me, he should give me a call. Then I can decide whether I answer the call or not. How can I disable this without completly disabling iMessage?

    I'm pretty sure there's no way to prevent this, just like there's no way to prevent a text message or picture/video message.  If you don't want to listen to it, delete it, and text them back and tell them you don't like voice messages and they need to call you and leave a voicemail.

  • How can i disable/hide the calling form from fnd_function.execute

    Hi,
    How can i disable/hide the calling form from fnd_function.execute.If so can any one give the syntax.
    thanks

    Hi Francesco,
    Are you talking about that ??? )) It will explain you about to get the name of the web page when you are executing an abap function for determining the values of variables...
    <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how%20to%20make%20a%20variable%20even%20more%20flexible%20in%20bw-bps.pdf">How to make a variable even more flexible in BW-BPS?</a>
    This is weird: I wrote that document a few weeks ago, it is theorically published on SDN but this is not possible to find it by using the research tool... Maybe because it applies only to BPS in 3.5. I did not have enough time to migrate that solution to BI-IP 7.0.
    Regards
    Laurent

  • How can i disable the internal speakers without voiding the warranty?

    The students here annoy other students trying to study, I have made an extension for the headphone so that it is mounted under the monitor, facing the front and hot glued the headphone jack to the back, but the students ripped out the extension and threw it away so that they could play very awful music and annoy everyone.
    How can I disable the internal speakers on our imacs without voiding warranty? There has to be a way!
    Thanks-

    Have you considered corporal punishment? One instructor I had in high school, when he had detention duty, played classical music an operas all during detention. He was quite "evil". He would have some slow "sleepy" music going for a bit, then it would throw in something to wake every one up like the 1812 Overture or something, and repeat this a few times...and have the music loud enough to prevent talking. Many detention-ees thought that was "cruel and unusual punishment." (LOL)
    But to your question. Since opening the case would normally void the warranty (unless you can find a empathetic Apple technician), what I would suggest is a "sleeve". Imagine some sheet metal and form it into a rectangular tube. The tube would closely follow the shape of the iMac covering all the cable ports. Then bolt the tube and iMac to the table. (Or at the very least, bolt the tube to the iMac.) Basically, make it so that there little room between the tube and iMac, that no one could access the ports without removing the tube. You'll also need to secure the cables to the tube so that no one can just pull out the cables, yet leave enough slack to allow for removal of the tube for maintenance. Even if the metal is not a full tube, but the Mac and metal is bolted to the table in such a way as to prevent access to the ports could be sufficient deterrent. If metal is not possible, then perhaps plastic or wood.
    I realize that is requires some work, and there is a drawback as pranksters could start dropping stuff inside the tube. Perhaps just have a clear plastic "wall" preventing all physical access to the Mac. Only a USB extension cable for the keyboard/mouse. Use Remote Disk sharing to mount CDs, if necessary.
    Some thoughts, anyway. Good luck!

  • How can I disable Firefox from automatically opening on system startup on my Mac - unchecking the "open at login" does not work?

    We have Firefox 10.o on our Macbook Pro OS X 10.5.8. I prefer using Firefox as my browser but my husband prefers Safari for now because of a long history of bookmarks and saved information he doesn't have time to re-do. He is tired of Firefox automatically opening when we start up the laptop, and even when we uncheck the "open at login" it still opens at login every time. He is about to uninstall it because of this. How can we disable? It does NOT show up in our account on the Mac OS as an application that starts at login, so we can't disable it there.

    For those of you running Windows, I found this on another site. (Unfortunately, not before getting totally disgusted and switching to chrome.)
    1. click start (or the windows flag button at the bottom left) 2. in the "search programs and files" or the RUN dialog box, enter "msconfig.exe" or "msconfig". 3. That should open the system configuration program. 4. click the "Startup" tab at the top of the opened program. 5. Under the "startup item" column, look for Mozilla firefox. 6. uncheck that one. 7. Click OK or apply. 8. click "exit without restart". 9. you're good to go.

  • How can I disable imessage from old phone?

    how can I disable imessage from old phone number / iphone I no longer have?

    iMesssage to old phone
    If you move to another phone and forget to turn off iMessage then read “if you no longer have the device in http://support.apple.com/kb/HT5661  If you still cannot resolve it call Apple http://support.apple.com/kb/HE57
    To deactivate iMessage http://support.apple.com/kb/ts5185
    Read http://m.samsung.com/us/support/SupportOwnersFAQPopup.do?faq_id=FAQ00053450&fm_s eq=62995

  • How can i disable imessage from automatically starting up when i turn on macbook air?

    how can i disable imessage from automatically starting up when i turn on macbook air? i dont know my imessages to pop up on my laptop when it turns on. But i dont want to disable imessage totally on my macbook.

    Welcome to the Apple Support Communities
    First of all, check that Messages is closed when you turn off your MacBook. This is so important because, by default, OS X will reopen all opened apps the next time you start your Mac.
    Apart from that, when you go to  > Shut Down, or  > Restart, in the window you see to restart or turn off your MacBook, unmark "Reopen windows when logging back in". This will avoid that your Mac opens all opened apps the next time you start the MacBook, so Messages won't start automatically at startup

  • The windows of the Windows bar are already a form of tabs, so I don't need them in Firefox. How can I disable them completely from Firefox 23?

    RE: TABS ARE WINDOWS!
    The Windows bar already functions as a tab bar. Those tabs are called "windows." So, I find Firefox tab windows superfluous. How can I disable them completely from Firefox 23? I don't need what is essentially TWO windows bars covering up the entire width of my widescreen monitor's image! I already have a Windows bar at the bottom of my screen and, if I really wanted to, I could change ITS position to the top of the screen, so that it would LOOK like the Firefox tab windows bar. Firefox TABS are, essentially, a superfluous SECOND WINDOWS BAR.
    Here are my reasons for why I'd rather use Mozilla's Firefox, than Microsoft's Internet Explorer or Google's Chrome. I love and admire Firefox for Mozilla's intent on good security, for Firefox's Personas add-on, and for Firefox's free use of the Ad-Block add-on which, as you know, has the distinct virtue of reducing screen clutter--the last of which is my motive for wanting to get rid of the SUPERFLUOUS Firefox tabs "windows" bar. I am dreadfully sick of companies forcing miscellaneous bars (mostly representing marketing campaigns trying to sell me something) into my browser (and down my throat) every time I download something. (In case you haven't guessed, I am deliberately referring to your Firefox tabs bar as a "Firefox tabs 'windows' bar," because TABS are WINDOWS!)

    Let me clarify even more. The Firefox add-on you mention does not remove "tabs" windows. It only HIDES the "tabs" bar when there is only one "tab" in that window. It DOES NOT end "tabs." It does not turn "tabs" off.
    I know this, because, even with the add-on you recommend, the "tabs" bar often re-appears when I open a link, which--for some unknown reason--Firefox defaults to opening in a second "tab" within the same window, rather than putting it in a new Windows bar window. This, of course, disregards what I want to happen.
    I want to use my Windows bar to control my windows. I do not want my Firefox browser controlling my windows--which it calls "tabs." Can you tell me how to shut off "tabs?"

  • HT204053 Hello I found someone using My Apple ID for face time how can I disable it

    Hello I found someone using My Apple ID for face time how can I disable it

    Welcome to the Apple community.
    Change your password..

  • How can i disable an icon beside battery percentage(a phone on some dots) ?

    AN icon appeared beside battery percentage(iphone 5).its a phone icone on some dots beside battery percentage.how can I disable it?

    iPhone: Understanding the TTY symbol in the status bar

  • How can i disable imessage on my notebook?

    I'm very sick of receiving text messages on every device. How can I disable imessage on my macbook pro so I don't receive texts that I wish to receive only on my phone?

    Welcome to Apple Support Communities
    If you do not want to receive your text messages on your Mac, open Messages, go to Messages menu (in the menu bar) > Preferences > Accounts, choose your iMessage account and untick your phone number or disable your account

Maybe you are looking for

  • Creating Form in Acrobat X ???'s

    Hello all - my question is when I Am creating a form in X, I need to place a description in the text box (i.e. Name) and I need guidance on how to get that description to re-appear if the text box is erased. This I cannot figure out. I was able to fi

  • Migration from T500 to T540P

    I have previously done a system image of to T500 OS and everything. The T500 is on it's last leg. I received a T540P as a replacement but I want to migrate the T500 system Image to be restored on my T540P. I know it's doable because I have done it BU

  • ITUNES 7.+Compatability on MacBookPro with Ask the DJ --getting nowhere

    I have iTunes 7.0+ & Ask the DJ on my MacBookPro. When I drag tunes to ATDJ they get all bpm ect. but when I play them they're garbled then just stop. It only happens on MBP none of the other machines, I've erased the old copies & downloaded new soft

  • User exit for making PO tolerance check at header level

    Hi, Is there a user exit or any other settings to make PO tolerance check at the PO header level rather than the usual check at the item level? Thanks in advance. Regards, Arun Mohan

  • Where to see details like minutes and seconds while cutting?

    Hi Guys I upgraded to iMovie version 10.0. When editing a project, I want to import a fragment and I would like to cut this based on the information my client gave me. They told me to take the part from for instance 0:29:25 until 0:35:25 (hours:minut