How can I disable IPv6 EUI randomization with group policy?

I need to turn off IPv6 EUI address randomization. It can be done in netsh (a few commands) or powershell (Set-NetIPv6Protocol -RandomizeIdentifiers Disabled). How can I do this in group policy without scripting?

Hi Jordan,
Before going further, I hope that the suggestion provided by Martin can be helpful.
It seems that we can't configure this setting via native policy.To configure IPv6 settings,
we need to download ADMX files for IPv6. However, per the following article, the IPv6 settings that can be configured are:
Enable all IPv6 components
(Windows default)
Disable all IPv6
components (the setting you probably want)
Disable 6to4
Disable ISATAP
Disable Teredo
Disable Teredo and 6to4
Disable all tunnel
interfaces
Disable all LAN and PPP
interfaces
Disable all LAN, PPP and tunnel
interfaces
Prefer IPv4 over IPv6
How to Disable IPv6 through Group Policy
http://social.technet.microsoft.com/wiki/contents/articles/5927.how-to-disable-ipv6-through-group-policy.aspx
TechNetSubscriber Support
If you are TechNetSubscription user and have any feedback on our support quality, please
send your feedback here
Best regards,
Frank Shen
Please read the question before marking things as answers.

Similar Messages

How can I disable Outlook 2010 addins using Group Policy

I have downloaded and imported the templates to enable me to set a GPO for disabling Outlook addins, but I am confused about how I disable things like the SharePoint addins (we do not use SharePoint so this is not needed). I have found several
posts saying to do this via a registry change, which I can easily do via GPO, but it does not say how to add keys for the different addins.
Does anyone have details of what I need to add into the registry or have a link to somewhere that gives a list of common ones I can use?

Hi,
>>Does anyone have details of what I need to add into the registry or have a link to somewhere that gives a list of common ones I can use?
After searching around, I think the following article may give us some tips about how to manage application-level add-ins. To disable a specific add-in, we can try to set the value of
LoadBehavior entry to 0 in the add-in's corresponding registry key. The registry key path for a specific add-in is as follows:
HKEY_CURRENT_USER or HKEY_LOCAL_MACHINE\Software\Microsoft\Office\application name\Addins\add-in ID
Registry Entries for Application-Level Add-Ins
http://msdn.microsoft.com/en-us/library/vstudio/bb386106.aspx#LoadBehavior
If this doesn't help, in order to get better help, it's recommended that we ask for suggestions in the following Outlook or SharePoint forums.
Outlook IT Pro Discussions
https://social.technet.microsoft.com/Forums/office/en-US/home?forum=outlook
SharePoint forums
https://social.msdn.microsoft.com/Forums/sharepoint/en-US/home?category=sharepoint
TechNet Subscriber Support
If you are TechNet Subscription user and have any feedback on our support quality, please send your feedback here.
Best regards,
Frank Shen

How can i disable ipv6 in OL7?

Hi everybody,
how can i disable ipv6 on my OL7 box?
In /etc/sysctl.d i have test it with the file: ipv6.conf:
net.ipv6.conf.all.disable_ipv6 = 1
net.ipv6.conf.<interface>.disable_ipv6 = 1
But this doesnt work.
Does anybody know how can i disable IPv6 in Oracle Linux 7?

What I would recommend is not to set implicit or redundant parameters:
net.ipv6.conf.all.disable_ipv6 = 1
net.ipv6.conf.default.disable_ipv6 = 1
There is no need to disable the "default" interface, since it is already included in the "all" statement.
I do not know, but there could be a possibility that such statements disable the network card in question, but in turn enable every other. In such case, your 2nd statement invalidates the first. Perhaps that was was part of the problem when using your other configuration.

How can I disable the memory sharing with the video?

how can I disable the memory sharing with the graphic card? it makes me impossible to run a software, grandMA2, on windows 7 installed and run via bootcamp. where should I look for changing the preferences of memory and video, on lion or on windows7? thank you

so what do you think. I run a software on windows 7 running via bootcamp on my mbp, but I can't open it. the software is compatible with windows 7 on mac. I tried opening it as administrator or changing the compatibility options, like running it as windows xp, and changing the resolution of the video. it can't build the window and then it crashes. on internet I found a compatibility list of the software where it says please do not use any shared memory for the graphic card. what does it mean? I have just to remove the check in automatic graphics switching? what should I try to do? thank you.

How can i disable faronics deep freeze with no username/password?

how can I disable deepfreeze with no username or password?

Basically you can't; that's the whole point of the software (or at least a large part of the point), so that unauthorized people can't make changes to the system. As Kappy said, you'll need to contact Faronics for assistance, but I don't remember any sort of "back door" to their software so there may be no solution short of erasing the drive and starting from scratch.
Regards.

How can I disable portal logon by portal group

Hi,
I know it is possible to disable logon to the portal by individual users. However I would like to disable the logon for an entire portal group. This would allow members of other portal groups to continue using the portal.
Simply removing the role from the group/user(s) is not an option.
Has anyone successfully done something like that?
Lets see if we can award some points

Hi Darren,
thanks for the quick reply. I guess I should qualify my requirement a bit more on what I want to achieve.
There are a number of applications in use and accessible through the portal, amongst them also ESS / MSS. We have assigned the portal roles to the portal groups. The users are assigned to the groups in the Corporate LDAP which is used by the portal to authenticate the users. I can't remove the users from the group(s) because the user/group assignment is done in the Corporate LDAP through an IDM system which prevents me from making changes to the user/group assignments through the portal.
So as an example this is what we want to achieve:
1. Disable the logon for users that are in the ESS group and let them know something like "ESS is currently in maintenance - come back later". Meanwhile, users belonging to the MSS group can still continue to log on.
2. After the maintenance was done, the logon for the ESS group is enabled again and the users that are in the ESS group can log on again.
I am not quite familiar with JAAS, but how would it help me with this example? I don't want to remove the user(s) from the group but simply prevent a specific group of users to logon for a chosen period of time or as an alternative disable on the fly the ability to perform certain actions (role based) within the portal short of re-assigning roles to groups?
Thanks muchly.

How can I disable the Auto Recent Contact Group in email

The email app automatically selects a recent group of contacts instead of the primary contact. This is extremely frustrating and very strange, IMO. Why would the default be to list the group instead of the primary contact you are searching for first?
Example:
Compose New Email
Start typing a contacts name int eh To: field
the list Autopopulates with recently emailed groups before the main contact.
Is there a way to disable this "feature". I know I can "Remove from Recents" but this is actually very tedious.
Thanks!
-Joe

If you only want to select from saved contacts, then tap the Plus ( + ) sign on the right of the address bar to bring up your actual contacts list instead of using this method.
You can still type a few letters into the search box at the top of the contact list to find your contact quickly.
Peter
Soluble Apps

How can I disable the advancedAntiAliasing with fontswf in sdk

Hi,
in asc2.0 we need 'fontswf' script to embed fonts instead of use .as file directly.
but here is a problem
I cannt disable the advancedAntiAliasing with fontswf ?
because I have found an issue when I set advancedAntiAliasing is true, then the textfield (which font is embeded) antiAliasType doesn't work even type is advanced. I need set advancedAntiAliasing is false (in asc1.0 you can set it by .as file)
now i just set the sharpness and thickness to workaround in used asc2.0
but i think that is not great.
so how can I disable the advancedAntiAliasing with fontswf or any other solution?
thanks
hbb

Hello -
That setting is not fully supported. You can explicitly call it like this:
./compc -include-sources ../samples/test/Main.as -output ../samples/test/Main.swf -advanced-anti-aliasing=true/false
So, that is the compiler option that you want to use in order to disable it. The example I show you here uses the command line tool but it is a valid switch via Flash Builder as well

Firefox keeps getting buggy and crashing with HTML5 player, how can i disable?

every time i open more than 2 tabs on youtube it gives me a freezing browsing experience, black page on videos and eventually crashing firefox, ive looked everywhere for a solution and did not find one, how can i disable the default html5 player? i tried 2 addons of youtube flash player which didn't work either, keeps being buggy and crashy
best regards,

''Debapriya Bhattacharya [[#answer-724245|said]]''
<blockquote>
Hello,
Some problems with Flash video playback can be resolved by disabling hardware acceleration in your Flash Player settings. (See [[Flash Plugin - Keep it up to date and troubleshoot problems|this article]] for more information on using the Flash plugin in Firefox).
To disable hardware acceleration in Flash Player:
#Go to this [http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_Solve_video_playback_issues Adobe Flash Player Help page].
#Right-click on the Flash Player logo on that page.
#Click on '''Settings''' in the context menu. The Adobe Flash Player Settings screen will open.
# Click on the icon at the bottom-left of the Adobe Flash Player Settings window to open the Display panel. <br/> <br/>[[Image:fpSettings1.PNG]] <br/>
# Remove the check mark from '''Enable hardware acceleration'''.
# Click '''Close''' to close the Adobe Flash Player Settings Window.
# Restart Firefox.
This [http://www.macromedia.com/support/documentation/en/flashplayer/help/help01.html Flash Player Help - Display Settings page] has more information on Flash Player hardware acceleration, if you're interested.
Does this solve the problem? Let us know.
</blockquote>
thank you for responding.
this does not solve my problem, as i mentioned the problem is with the HTML5 player, i've been using flash player since forever and used to open up to 50 tabs without having any problems, with the new default html5 thingy i cannot open a couple of tabs without the browser dying slowly.. my original question was how can i disable the HTML5 player and make the flash player be the default player

How can I disable my iphone with a computer using itunes?

How can I disable my iphonewith a computer using itunes?

Welcome to the Apple Community.
You cannot disable your phone using iTunes.
You can only locate, lock or erase your device when it is logged into iCloud and 'Find My Phone' is enabled, additionally the device will need to be switched on and connected to a wifi or cellular network.
Unfortunately, you cannot activate iCloud or 'Find My Phone' remotely.

How can I disable my iPad someone kept playing with it now it's totally disabled

How can I disable my iPad someone was trying to break into it and I know it's totally disabled

1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
iTunes free download from www.itunes.com/download

The windows of the Windows bar are already a form of tabs, so I don't need them in Firefox. How can I disable them completely from Firefox 23?

RE: TABS ARE WINDOWS!
The Windows bar already functions as a tab bar. Those tabs are called "windows." So, I find Firefox tab windows superfluous. How can I disable them completely from Firefox 23? I don't need what is essentially TWO windows bars covering up the entire width of my widescreen monitor's image! I already have a Windows bar at the bottom of my screen and, if I really wanted to, I could change ITS position to the top of the screen, so that it would LOOK like the Firefox tab windows bar. Firefox TABS are, essentially, a superfluous SECOND WINDOWS BAR.
Here are my reasons for why I'd rather use Mozilla's Firefox, than Microsoft's Internet Explorer or Google's Chrome. I love and admire Firefox for Mozilla's intent on good security, for Firefox's Personas add-on, and for Firefox's free use of the Ad-Block add-on which, as you know, has the distinct virtue of reducing screen clutter--the last of which is my motive for wanting to get rid of the SUPERFLUOUS Firefox tabs "windows" bar. I am dreadfully sick of companies forcing miscellaneous bars (mostly representing marketing campaigns trying to sell me something) into my browser (and down my throat) every time I download something. (In case you haven't guessed, I am deliberately referring to your Firefox tabs bar as a "Firefox tabs 'windows' bar," because TABS are WINDOWS!)

Let me clarify even more. The Firefox add-on you mention does not remove "tabs" windows. It only HIDES the "tabs" bar when there is only one "tab" in that window. It DOES NOT end "tabs." It does not turn "tabs" off.
I know this, because, even with the add-on you recommend, the "tabs" bar often re-appears when I open a link, which--for some unknown reason--Firefox defaults to opening in a second "tab" within the same window, rather than putting it in a new Windows bar window. This, of course, disregards what I want to happen.
I want to use my Windows bar to control my windows. I do not want my Firefox browser controlling my windows--which it calls "tabs." Can you tell me how to shut off "tabs?"

How can I DISABLE the pop up 'Would you like to copy it to Library', preventing this message from bothering for each and every book, again and again, time after time? (Windows 7 64bit US).

How can I DISABLE the pop up 'Would you like to copy it to Library', preventing this message from bothering for each and every book, again and again , time after time? (Windows 7 64bit US).
I guess this may be a feature request. Adobe may think this is a good message for every new eBook.
I sure would like to decide about that myself.
Thanks in advance if this will be changed.

singmk wrote:
Decided to setup the mail for exchange on my N8 so I could see my work emails. Worked like a charm but after a couple of hours decided I didn't like being that contactable so deleted the mailbox.
Now to the problem, during setup I was forced to enable the phone lock and had to pick a 7 digit alphanumeric code. Fair enough I thought and went ahead. When I removed the mailbox however the lock remained in place with the default auto time of 30 minutes. When I checked in Phone management there is no option to disable this lock so I thought I could at least change the default time to something bigger but when you try, it remains at 30 mins. You also can't disable the auto time as it pops up an error message saying can't unlock phone.
Does anyone know if I'm missing something obvious here or is this something which can't be disabled once it's switched on? I've done a soft reset back to factory settings with no luck and the only other thing I can think of is re installing the firmware which seems a bit extreme.
Would like to hope there is some way to have control over this. Can someone help?
Which firmware your N8 having now? You can check firmware by choosing Call, then type *#0000#.
My N8 works fine on security setting and able to define Phone auto lock period, by choosing Menu>Settings>Phone>Phone management>Security settings>Phone and SIM card>Phone auto lock period>User defined>Lock after(minutes)
You will prompt to enter Lock code each time u define auto lock priod or enable/disable auto lock.
Hope this can help you.
If you find this post helpful, please show your appreciation by clicking the Kudos star at the left. If it provides you the solution, please click on the GREEN Accept as Solution button at below

How can i disable the credit card from that stolen acc and register to my new account

Hello everywone i have a big problem.. Somewone stole my apple id and changed everything (email , secret question). In that account was my credit card registered. how can i disable the credit card from that stolen acc and register to my new account ?? thanks for help

Is it an IMAP or POP account?
For POP accounts, you can select remove from server under the advanced tab of the account.
Apple support article with information on receiving a message more than once:
Mail Problems

How can I disable iCloud on my iMac and my iPod touch 5th gen?

My ipod touch 5th gen now syncs through icloud. How can I disable icloud from my ipod and my imac and go back to syncing through iTunes. Is it possible to do this without losing the data in contacts and ical? Any ideas would be much appreciated!

With the iPod connected to your computer go to the Summary pane for the iPod in iTunes and uncheck the box that says: Sync with this iPod over Wi-Fi.
Also in the Summary pane check the box that says backup to the computer.

How can I disable IPv6 EUI randomization with group policy?

Similar Messages

Maybe you are looking for