How can I disable Outlook 2010 addins using Group Policy
I have downloaded and imported the templates to enable me to set a GPO for disabling Outlook addins, but I am confused about how I disable things like the SharePoint addins (we do not use SharePoint so this is not needed). I have found several
posts saying to do this via a registry change, which I can easily do via GPO, but it does not say how to add keys for the different addins.
Does anyone have details of what I need to add into the registry or have a link to somewhere that gives a list of common ones I can use?
Hi,
>>Does anyone have details of what I need to add into the registry or have a link to somewhere that gives a list of common ones I can use?
After searching around, I think the following article may give us some tips about how to manage application-level add-ins. To disable a specific add-in, we can try to set the value of
LoadBehavior entry to 0 in the add-in's corresponding registry key. The registry key path for a specific add-in is as follows:
HKEY_CURRENT_USER or HKEY_LOCAL_MACHINE\Software\Microsoft\Office\application name\Addins\add-in ID
Registry Entries for Application-Level Add-Ins
http://msdn.microsoft.com/en-us/library/vstudio/bb386106.aspx#LoadBehavior
If this doesn't help, in order to get better help, it's recommended that we ask for suggestions in the following Outlook or SharePoint forums.
Outlook IT Pro Discussions
https://social.technet.microsoft.com/Forums/office/en-US/home?forum=outlook
SharePoint forums
https://social.msdn.microsoft.com/Forums/sharepoint/en-US/home?category=sharepoint
TechNet Subscriber Support
If you are TechNet Subscription user and have any feedback on our support quality, please send your feedback here.
Best regards,
Frank Shen
Similar Messages
-
How can I disable IPv6 EUI randomization with group policy?
I need to turn off IPv6 EUI address randomization. It can be done in netsh (a few commands) or powershell (Set-NetIPv6Protocol -RandomizeIdentifiers Disabled). How can I do this in group policy without scripting?
Hi Jordan,
Before going further, I hope that the suggestion provided by Martin can be helpful.
It seems that we can't configure this setting via native policy.To configure IPv6 settings,
we need to download ADMX files for IPv6. However, per the following article, the IPv6 settings that can be configured are:
Enable all IPv6 components
(Windows default)
Disable all IPv6
components (the setting you probably want)
Disable 6to4
Disable ISATAP
Disable Teredo
Disable Teredo and 6to4
Disable all tunnel
interfaces
Disable all LAN and PPP
interfaces
Disable all LAN, PPP and tunnel
interfaces
Prefer IPv4 over IPv6
How to Disable IPv6 through Group Policy
http://social.technet.microsoft.com/wiki/contents/articles/5927.how-to-disable-ipv6-through-group-policy.aspx
TechNetSubscriber Support
If you are TechNetSubscription user and have any feedback on our support quality, please
send your feedback here
Best regards,
Frank Shen
Please read the question before marking things as answers. -
How can i disable Sharepoint 2010 xlviewer link
Hi,
I Prepare a report in excel 2010 file and uploaded in the Sharepoint 2010. And i see the report in the xlviewer.
In the Viewer window top i see the link like this
ServerName >FolderName > ReportName.xlsx
How can i disable this link.Hi,
If you want hide the breadcrumb in the xlviewer.aspx page, you can edit the xlviewer.aspx page in
\14\TEMPLATE\LAYOUTS(backup the page before editing):
Open the page using SharePoint Designer, under <asp:Content ContentPlaceHolderId="PlaceHolderPageTitleInTitleArea" id="m_TitleContent"
runat="server">, add the following css code:
<style type=”text/css”>
.s4-mini-header
{ display:none; }
</style>
Xue-Mei Chang -
How can I disable developers tools from using function keys?
Every time I try to use my Quake like console binded to the F12 key, it opens the dev.Tools. How can I disable or even better uninstall dev. Tools.
I don't want to change the key I use for my console, I want dev.tools to stop bothering me when I'm browsing the web, IT'S DISTURBING!!!
Most people doesn't need dev tools, just put it as a plugin !!!Was eventually able to eliminate this problem by deleting the size entry in the devtools.toolbox.host using about config.
At least it's invisible now instead of occupying half the page every time I hit F12. -
Can't sync Outlook 2010 calendar using DM 6
Hi, This is my first time on the forum. I have searched for similar issues and tried some suggestions, but am still having issues. I get "BlackBerry Desktop Software has encountered a problem and needs to close" error message trying to sync to Outlook 2010 address book using DM 6. When I press debug to get more info, I get the error "Rim.Desktop.exe has encountered a problem and needs to close" and then it shuts down. I have narrowed it to just my address book. My notes, calendar, and tasks sync fine. I thought it may be some rich text (hyperlinks, etc.) in the notes of contacts and disabled the link of the body to notes in the advanced options, but it still crashes. Looking for some help on next steps. asrjcb
Hi asrjcb,
I would recommend downloading and installig the latest version of BlackBerry Desktop Manager. This now has support for Microsoft Outlook 2010 64-bit.
http://www.blackberry.com/go/softwaredownloads
Thanks
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)! -
How do I force Outlook 2010 to use Firefox instead if IE8?
Whenever I click a link in my emails, it opens in IE8. With only one link, it works fine, but when I click on multiple links in a techie email, IE locks up when dealing with multiple tabs. Firefox works great.
Where do I change the settings in Outlook 2010 so that links will open using Firefox instead???????
Help files have not produced an answer.
This is on a Win 7 Ultimate 32, Office 2010 Military version, with full Outlook 2010.
TIAI found that this link solved my problem for windows 7:
[http://www.werockyourweb.com/how-do-i-set-default-browser-outlook http://www.werockyourweb.com/how-do-i-set-default-browser-outlook] -
How can I syncronize Outlook 2010 with I-Phone4
When I start, the first line is telling it has connection to Outlook. But then it changes to this:
Hi Bill8181,
The resources below will provide some troubleshooting steps for syncing calendars and contacts with Outlook using either iCloud or iTunes:
Get help using iCloud Calendar - Apple Support
https://support.apple.com/en-us/HT203521
Get help using iCloud Contacts - Apple Support
https://support.apple.com/en-us/HT204150
Troubleshooting Sync Services on Windows with Microsoft Outlook 2003, Outlook 2007, or Outlook 2010 - Apple Support
https://support.apple.com/en-us/HT203300
I hope this information helps ....
- Judy -
How can I disable color print when using airprint?
How can I print from my iPhone or iPad in black and white only, so as to save my color ink? I am using HP Photosmart 5510. I can't see how airprint gives that option. Is there an app out there for this?
That is a function of your printer, you can set your printer to be B&W via it's front panel settings.
-
How can I disable portal logon by portal group
Hi,
I know it is possible to disable logon to the portal by individual users. However I would like to disable the logon for an entire portal group. This would allow members of other portal groups to continue using the portal.
Simply removing the role from the group/user(s) is not an option.
Has anyone successfully done something like that?
Lets see if we can award some pointsHi Darren,
thanks for the quick reply. I guess I should qualify my requirement a bit more on what I want to achieve.
There are a number of applications in use and accessible through the portal, amongst them also ESS / MSS. We have assigned the portal roles to the portal groups. The users are assigned to the groups in the Corporate LDAP which is used by the portal to authenticate the users. I can't remove the users from the group(s) because the user/group assignment is done in the Corporate LDAP through an IDM system which prevents me from making changes to the user/group assignments through the portal.
So as an example this is what we want to achieve:
1. Disable the logon for users that are in the ESS group and let them know something like "ESS is currently in maintenance - come back later". Meanwhile, users belonging to the MSS group can still continue to log on.
2. After the maintenance was done, the logon for the ESS group is enabled again and the users that are in the ESS group can log on again.
I am not quite familiar with JAAS, but how would it help me with this example? I don't want to remove the user(s) from the group but simply prevent a specific group of users to logon for a chosen period of time or as an alternative disable on the fly the ability to perform certain actions (role based) within the portal short of re-assigning roles to groups?
Thanks muchly. -
Outlook 2010 profiles via Group Policy
We have already deployed Office 2010. Currently, we are using Groupwise mail & will soon instead be using Outlook 2010 (with Exchange 2010). We would like to create an Outlook profile and set it to be the default mail profile by purely using
Group Policies. Is this possible or are we forced to script the use of PRF files ? We won't be purchasing any other deployment products (besides perhaps upgrading our System Centre Essentials)
ThanksHi
Thank you for using
Microsoft Office for IT Professionals Forums.
You can manually edit a .PRF file to customize Outlook 2010 to include Outlook settings or MAPI services that are not included in the Office Customization
Tool (OCT) user interface.
Download OCT from the Microsoft Download Center:
Office 2010 Administrative Template files (ADM, ADMX/ADML)
and Office Customization Tool (http://go.microsoft.com/fwlink/?LinkId=189316).
Apply a .prf file
You can apply a .prf file in several ways to update Outlook profiles.
To apply a .prf file by using the customization file
From the root of the network installation point, run the following command line to start the OCT:
\\server\share\setup.exe /admin
To edit an existing .msp file, in the
Select Product dialog box, click Open an existing Setup customization file. Or to create a new customization file, select the Office suite that you want to customize, and then click
OK.
In the
Outlook area, click Outlook Profile. Select
Apply PRF, and then browse to the file.
On the
File menu, click Save to save the .msp file.
Exit the OCT.
Put the .msp file in the Office installation source \Updates folder.
Install Office 2010 from the original installation source.
To apply a .prf file by using other options
Specify the .prf file as a command-line option for Outlook.exe to import a .prf file without prompting the user. For example:
outlook.exe /importprf \\server1\share\outlook.prf.
Specify the .prf file as a command-line option for Outlook.exe, but prompt the user before importing the .prf file. For example:
outlook.exe /promptimportprf \\localfolder\outlook.prf. If you put the specified .prf file in a shared folder on a network, the settings might not be applied if the file is not found or is not available when Outlook runs.
Office Customization Tool in Office 2010
http://technet.microsoft.com/en-us/library/cc179097.aspx
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything I can do for
you, please feel free to let me know.
Best regards
William Zhou
Please remember to mark the replies as answers if they help and unmark them if they provide no help. -
How can we disable Block Level Trigge using Form Personalization
Hi,
I want to disable block level trigger(WHEN-NEW-RECORD-INSTANCE) using forms personalization at responsibility level.
Can any one please give me the answer.
it's urgent
Thanks and Regards,
DhanaNo, Firefox is user choice rules over the "wants" of individual websites as far as disabling contextual menus and the keyboard commands.
Placing a transparent image over the image will keep the less technical user from saving the main image. If they do try to save it all they'll get is the transparent image overlay. -
How can I disable the Auto Recent Contact Group in email
The email app automatically selects a recent group of contacts instead of the primary contact. This is extremely frustrating and very strange, IMO. Why would the default be to list the group instead of the primary contact you are searching for first?
Example:
Compose New Email
Start typing a contacts name int eh To: field
the list Autopopulates with recently emailed groups before the main contact.
Is there a way to disable this "feature". I know I can "Remove from Recents" but this is actually very tedious.
Thanks!
-JoeIf you only want to select from saved contacts, then tap the Plus ( + ) sign on the right of the address bar to bring up your actual contacts list instead of using this method.
You can still type a few letters into the search box at the top of the contact list to find your contact quickly.
Peter
Soluble Apps -
Deploy Office 2010 by using Group Policy - Invalid switch - "/config"
Hi All,
We are following steps described in this article -
http://technet.microsoft.com/en-us/library/ff602181.aspx . However it won't work and will terminate with error code 1 - "Setup ended with error code 1". Further investigations has shown that error is produced by start-up batch script due to Invalid
switch - "/config". According to the above article to trigger an install we need the following:
start /wait %DeployServer%\setup.exe /config %ConfigFile%
However it will fail with the error: Invalid switch - "/config", because obviously "/config" switch does not belong to START command
It seems to work if we will use the following (without START /WAIT):
%DeployServer%\setup.exe /config %ConfigFile%
Could anyone please elaborate on the above?
Also why would we want to use START /WAIT at all?
TYSo, you figured out that this problem occures if path to deployment share, config.xml and setup.exe has spaces in it, that is absolutely true.
But I see another workaround, not changing your share path to have no spaces in it.
I suggest changing the setup script.
Do the following:
1) Find this part of the script:
REM If 1 returned, the product was not found. Run setup here.
:DeployOffice
start /wait %DeployServer%\setup.exe /config %ConfigFile%
echo %date% %time% Setup ended with error code %errorlevel%. >> %LogLocation%\%computername%.txt
2) Use quotes wisely to get something like this:
REM If 1 returned, the product was not found. Run setup here.
:DeployOffice
start /wait "%DeployServer%\setup.exe" /config "%ConfigFile%"
echo %date% %time% Setup ended with error code %errorlevel%. >> "%LogLocation%\%computername%.txt"
As you can see, I used quotes to mark those parts of scipt that will have spaces in UNC paths when running the script in cmd.
It did the trick for me and i have spaces in my UNC path to setup share :) Hope that helps. -
Disable Outlook 2010 Themes/Stationery through Group Policy
I can't disable Outlook 2010 Stationery/Themes/Fonts by Group Policy. I have read through so many threads from people who need to do this but all of the so-called solutions end up being for 2003 or 2007.
Using Group Policy Management Editor
Created Policy -> User Configuration -> Policies -> Administrative Templates -> Microsoft Outlook 2010 -> Disable Items in User Interface -> Custom -> Disable command bar buttons and menu items.
Entered the following command bar IDs to disable
11584,14014,14823,12305,16182,13991,12245,12680,12863,12681,12864,13927,2857,2858, 13779,3766
Still doesn't work.Hi
As per the information and details provided by you, to disable Outlook 2010 Themes/Stationery please follow these steps: -
CLASS USER
CATEGORY !!CustomUserSettings
CATEGORY !!Outlook2010
POLICY !!DisableNewStationery
KEYNAME "Software\Policies\Microsoft\Office\14.0\Common\MailSettings"
EXPLAIN !!DisableNewStationery_Explain
VALUENAME "NewStationery"
VALUEON ""
VALUEOFF NUMERIC 1
END POLICY
POLICY !!DisableNewTheme
KEYNAME "Software\Policies\Microsoft\Office\14.0\Common\MailSettings"
EXPLAIN !!DisableNewTheme_Explain
VALUENAME "NewTheme"
VALUEON ""
VALUEOFF NUMERIC 1
END POLICY
POLICY !!DisableMoreStationery
KEYNAME "Software\Policies\Microsoft\Office\14.0\Outlook\DisabledCmdBarItemsList"
EXPLAIN !!DisableMoreStationery_Explain
VALUENAME "TCID99"
VALUEON "5611"
VALUEOFF NUMERIC 1
END POLICY
END CATEGORY
END CATEGORY
[strings]
DisableNewStationery="Disable Modify Default Stationery
DisableNewStationery_Explain="Prevents users from changing the default stationery. NOTE: To disable, set to 'Not Configured'
or move GPO out of scope.
DisableNewTheme="Disable Modify Default Theme
DisableNewTheme_Explain="Prevents users from changing the default theme. NOTE: To disable, set to 'Not Configured'
or move GPO out of scope.
DisableMoreStationery="Disable More Stationery
DisableMoreStationery_Explain="To disable Actions > New Mail Message Using > More Stationery. This prevents
creating a new message using stationery.
Outlook2010="Outlook 2010
CustomUserSettings="Custom User Settings
I hope this information will be helpful for you.
Thanks and regards
Shweta@G -
HT204053 Hello I found someone using My Apple ID for face time how can I disable it
Hello I found someone using My Apple ID for face time how can I disable it
Welcome to the Apple community.
Change your password..
Maybe you are looking for
-
Autofill form with database data
I'm trying to create a form that when the page loads, will automatically fill with data according to the parameters specified in the url. I then want to be able to change fields within the form, and submit it, saving the
-
How to restore to ios 6 in DFU mode.
ive updated my iphone 4s to iosw 7 beta and now that the official version came out id like to uninstall it so ive put it in DFU mode to restore but i keep getting an error message PLEASE HELP and im not an apple developer also.
-
I had a drive that crashed on me. I installed a new one and ran migration from a super duper backup. Yes which the bootable drive would not mount. It copied the user files over but under users my account has a "-" sign bottom left of some of the fold
-
Running report from database package
Hi, I have a database package and it gets soem details and submits the report using SRW. It has submitted successfully. But the report is not outputed but there is file with extension eps. Can the package pass the user variables?? The package code fo
-
JSF expression language question
Hi, is it possible to write something like this: <h:dataTable value="#{myControllerBean.persons}" var="person"> <h:column> <h:outputText value="#{person.#(myControllerBean.selectedItem)}"/> <h:column/> </h:dataTable> where i can dynamicly choose prop