How can I disable SAP XI user authentication?

Hi
I am sending a soap from a external program, but it doesn't support input of user id and password.
Is there a way to disable the user authentication on the sender SOAP adapter?
Or is there a way of sending the logon data in the request or in the url?
Best regards
Morten

Hi,
Thanks, this is in a DMZ area so the security is taken care of.
Can you tell me more about how we can do this? Is this done by editing the web.xml file?
Regards,
morten

Similar Messages

CUA - how can I disable child system user record RENAME?

I have setup CUA. How can I disable SU01/RENAME from the child system? If a user is Renamed directly in the child system, the new record is unlocked and can be edited in the child system. These new records are now out of sync with CUA master data.
I dont see an option for 'rename' in SCUM.
Is this how CUA is supposed to work, or can the rename function be disabled?
Thanks.

Ben,
We have installed CUA on solution manager 4.0, the back end (child) system is R3 4.7.
My CUA SCUM shows seperate tabs for Address and Logon data.
On the Address tab Ive set everything to global, its a long list.
On the Logon tab all fields, except for inital password, are set to 'global', inital password is set to 'everywhere', to allow changes directly in the child system.
Just about everything seems to be working, except this RENAME problem. The users are greyed out in the child system, the create button doesnt even exist anymore in SU01 in the child system. Syncing between the CUA and Child systems is working as I expect.
Any suggestions?
Thanks for the quick response.

How Can i disable folder menu in any form im ORACLE EBS?

How Can I disable it for user or responsibility????

I wrote two procedures.
DISABLE_INDEXES:
     On source:      select index_name from dba_indexes where table_name= '<%=odiRef.getTable("L","TARG_NAME","A")%> '
     On target:         alter index #index_name unusable
REBUILD_INDEXES
     On source:      select index_name from dba_indexes where table_name= '<%=odiRef.getTable("L","TARG_NAME","A")%> '
     On target:         alter index #index_name rebuild
And i used these two procedures in my package.
Many thanks for advices.

SNR License Issue. How Can I Disable SNR for all Users?

Hi,
I Have an issue with SNR on CUCM 10.5 and with assignement of license type
I have a cluster with 400 users.
200 users use ip phone 3905 and should be use an Essential License.
When system check for assignement of license type , itassign a Basic License instead of an Essential License, because it see that users have SNR Enabled.
All users in my system have SNR enabled, and I can not disable it. All my user have Enable Mobility unchecked, and all my phone have Device Mobility Off, but system however see SNR enable.
How can i disable SNR for all users? This is a feature that client don't need.
I dont' have a sufficent number of licenses for support all 3905 in Basic License.
thanks for help.
Andrea

Well actually, Mobile Identity wouldn't apply to a 3905 unless those phones had another line on a Dual-Mode device like an iPhone or Android phone. So unless you have either of those in your system you can scratch that idea. Someone else may chime in here and try to help a bit more as RD/RDP are the main SNR culprits.

How can i know about any users who log on sap last one month..all data and

Dear all,
how can i know about any users who log on sap last one month..all data and transaction code they used in a month.
Regards,
ASHUTOSH
9891595497

Dear Ashutosh,
I think your question is in the wrong forum. This is for SAP MDM related questions and answers. SAP MDM does not use Transaction codes. So you may not get much help here.
Please try posting your question in the ABAP forums and you may get the right resources to help you.
Thanks.
Siva K.

How can I disable the assistive touch programmatically ? This is like a bug. Though the Guided access is enabled a user can take screenshot of my application content. How can I solve this ? any idea ....

How can I disable the assistive touch programmatically ? This is like a bug. Though the Guided access is enabled a user can take screenshot of my application content. How can I solve this ? any idea ....

Question: Do you think the response from the support staff is correct? I mean, surely, I can't be the only CF user on a shared box whose other users need to modify the date and time within their applications. Even if they do it at the application level for their domain, surely it wouldn't affect mine, would it? That was what was implied by the support people, but I have a feeling they are way off, or covering for some goof-up on their end. I struggled like hell yesterday trying to get this to work and I did not get very far at all.
I found an interesting tutorial here which does a comparison of time zones and, theoretically, this might do the trick. But if what the guy told me was nonsense then I won't bother with it. For the record, our calendar has been working fine for about a week now.

Could any one tell me that How can i create the service User ie j2ee SID

hi all,
In the implementation of SPNego Authentication schem in my portal system.
i want to create the service user ie .j2ee-<SID>.
<b>could any one tell me that How can i create the service User ie j2ee-<SID> in my visual administrator??</b>.
any help will be highly Appretiated .
thanks and regards.
vinit soni.

Vineet,
the user management tab opens in Read Only mode - thats why the button is coming as disabled. There is a button for switching into Edit mode - it looks like a pen / pencil on the top bar. Click on that - your "Create User" button would be enabled.
Also regarding creation of Service User via code level you can see <a href="https://www.sdn.sap.com/irj/sdn/thread?messageID=1057074">THIS</a> thread. And <a href="http://HERE">http://help.sap.com/saphelp_nw04/helpdata/en/f9/e3162ec55f4df6922d161f3785012a/frameset.htm</a>HERE[/url] is the SAP Help documentation on required permission settings.
Regards,
Shubhadip
Message was edited by:
Shubhadip Ghosh
Message was edited by:
Shubhadip Ghosh

How can I disable Connect / AS SYSDBA

Hi,
How can I disable
CONNECT / AS SYSDBA
Regards

1) Oracle version?
2) OS?
3) Looks like you're using OS authentication method. Switch to password-file method, and set a meaningful password for sys. You'll need the users which should not login as sysdba out of the OSDBA group, since OS authentication has priority over password file authentication. To setup password file authentication, you'll need the parameter REMOTE_LOGIN_PASSWORDFILE at "EXCLUSIVE". You'll also need to create a password file ("ORAPWD FILE=filename PASSWORD=password ENTRIES=max_users").
HTH
Daniel

How can I disable the Mail program from starting automatically on boot?

Why everytime I start my computer, the Mail program start automatically?...how can I disable this?
Thanks!

Control-click its Dock icon and set it not to open at login, or remove it from the list of login items for your user account in the Accounts pane of System Preferences.
(40415)

How can i disable a submit button and execute submit_action method on click

Good Day,
On my page I have a submit button that execute the submit_action method of the page backing bean that submit data captured on the page into a database and activate another class that send mail at the same time on a click of the submit button,the mail process takes a while before returning back to the page.I was able to disable the submit button to prevent the user from keep click while the process is running but the issue is on clicking the submit button it only disable the submit button without executing the submit_action method of the page backing bean.How can i disable the submit button and execute submit_method of the backing bean at the same time.
Thanks in advance.

I tried this out on one of my pages to see if it works.
First, I added the following JavaScript to my submit button's onClick event:
this.disabled=true; return true;When I clicked the submit button, it was disabled but the form was not submitted.
I deleted the JavaScript from the onClick event and added the following JavaScript to the form's onSubmit event:
var button = document.getElementById("form1:submitButton"); button.disabled=true; return true;When I click the submit button, it was disabled and the form was submitted but the button's action method was not called.
The next thing I tried was to change the onSubmit event code:
var button = document.getElementById("form1:submitButton"); setTimeout("button.disabled=true", 500); return true;This seemed to work. The difference was that I added a 1/2 second delay before disabling the button.
See if that works for you. If not then I'm fresh out of ideas.

How can I DISABLE the pop up 'Would you like to copy it to Library', preventing this message from bothering for each and every book, again and again, time after time? (Windows 7 64bit US).

How can I DISABLE the pop up 'Would you like to copy it to Library', preventing this message from bothering for each and every book, again and again , time after time? (Windows 7 64bit US).
I guess this may be a feature request. Adobe may think this is a good message for every new eBook.
I sure would like to decide about that myself.
Thanks in advance if this will be changed.

singmk wrote:
Decided to setup the mail for exchange on my N8 so I could see my work emails. Worked like a charm but after a couple of hours decided I didn't like being that contactable so deleted the mailbox.
Now to the problem, during setup I was forced to enable the phone lock and had to pick a 7 digit alphanumeric code. Fair enough I thought and went ahead. When I removed the mailbox however the lock remained in place with the default auto time of 30 minutes. When I checked in Phone management there is no option to disable this lock so I thought I could at least change the default time to something bigger but when you try, it remains at 30 mins. You also can't disable the auto time as it pops up an error message saying can't unlock phone.
Does anyone know if I'm missing something obvious here or is this something which can't be disabled once it's switched on? I've done a soft reset back to factory settings with no luck and the only other thing I can think of is re installing the firmware which seems a bit extreme.
Would like to hope there is some way to have control over this. Can someone help?
Which firmware your N8 having now? You can check firmware by choosing Call, then type *#0000#.
My N8 works fine on security setting and able to define Phone auto lock period, by choosing Menu>Settings>Phone>Phone management>Security settings>Phone and SIM card>Phone auto lock period>User defined>Lock after(minutes)
You will prompt to enter Lock code each time u define auto lock priod or enable/disable auto lock.
Hope this can help you.
If you find this post helpful, please show your appreciation by clicking the Kudos star at the left. If it provides you the solution, please click on the GREEN Accept as Solution button at below

How can I disable ctrl+alt+del and other keys

I need help on how to disable some keyboard key combinations (ctrl+alt+del)in particular. Disabling other keyboard keys is equally welcomed.
Also how can I disable Windows 2000/XP's Task Manager from exposing my running program to be terminated.
Thanks

I need help on how to disable some keyboard key
combinations (ctrl+alt+del)in particular. Disabling
other keyboard keys is equally welcomed.This is not a java question per se. I would recommend searching on MSDN or some such site to figure this out.
Also how can I disable Windows 2000/XP's Task Manager
from exposing my running program to be terminated.This can be done by limiting the permissions of the Windows user that you would like to prevent from doing this. The user manager lets you do this.
>
ThanksNo problem.

How can I disable the behance pics during the startup of my CC 2014 programmes?

When I start my photoshop cc 2014 and illustrator and all other apps, there ware always some behance pics from users.
is there a way to disable them?
thanks a lot
alex

hi sarah,
thanks for getting back to me.
i mean these images:
when the programmes are starting up…
thanks a lot for your help
alex
Am 08.01.2015 um 16:05 schrieb SarahBehance1 <[email protected]>:
How can I disable the behance pics during the startup of my CC 2014 programmes?
created by SarahBehance1 in Behance - View the full discussion
HI Alex - can you send a screenshot of what you're seeing? I'm not sure what you're referring to.
Talk to you soon, thanks!
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7077548#7077548 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7077548#7077548
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Behance by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.
Alex an der Haas
Art Direction
// Die Goldkinder
// Ausdenken und Machen.
// Mollardgasse 85A / Stiege 3 / Top 142, 1060 Wien
// Tel: +43 (0) 1 595.37.07
// Mob: +43 (0) 699.816.366.31
// http://www.diegoldkinder.at

How can I disable input on the ALV gridview?

Hi everybody,
I'm developing an application and would like for my users to be able to view the data in the ALV grid. Actually the only thing they may be able to do are delete rows from the ALV.
I set the ALV grid to editmode so you can insert and delete rows. But how can I disable the Insert functionality without losing the delete functionality?
Is is possible to just remove or hide the 'add row' button in the toolbar?
Thanks in advance
Regards,
Wouter

Wouter,
It is possible to EXCLUDE buttons from the ALV GRID tool bar. You didn't mention if you were using OO or not, therefore I will assume you are not.
* In Global Data
data:
g_exclude                  TYPE slis_t_extab.
* somewhere before you call the FM to display ALV
PERFORM exclude_icons.
* You will need to find out the FCODE of your Add Row Icon in the GUI Status being used.
*      Form exclude_icons
FORM exclude_icons.
APPEND '&ETA' TO g_exclude.     "Details
* APPEND '&OUP' TO g_exclude.     "Sort Up
* APPEND '&ODN' TO g_exclude.     "Sort Down
APPEND '&ILT' TO g_exclude.     "Set Filter
APPEND '&UMC' TO g_exclude.     "Sum
* APPEND '&RNT_PREV' TO g_exclude.     "Print preview
* APPEND '&VEXCEL' TO g_exclude.     "Excel
* APPEND '&RNT_PREV' TO g_exclude.     "Word processing
* APPEND '%PC' TO g_exclude.     "Local File
* APPEND '%SL' TO g_exclude.     "Mail recepient
APPEND '&ABC' TO g_exclude.     "ABC Analysis
APPEND '&GRAPH' TO g_exclude.     "Graphic
* APPEND '&OL0' TO g_exclude.     "Change layout
* APPEND '&OAD' TO g_exclude.     "Select layout
* APPEND '&AVE' TO g_exclude.     "Save Layout
APPEND '&INFO' TO g_exclude. "Information
ENDFORM.                    " exclude_icons
* When you execute the FM to display...
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
            i_callback_program = g_repid
            is_layout          = g_layout
            it_sort            = g_sort[]
            it_events          = g_events[]
            it_fieldcat        = g_fieldcat[]
            i_save             = g_save
            it_excluding       = g_exclude "<== Need this parameter defined to pass
       TABLES
            t_outtab           = it_out
       EXCEPTIONS
            program_error      = 1
            OTHERS             = 2.

How can we disable the 'Improvement Program' from all the apps in TCS5?

How can we disable the 'Improvement Program' from all the apps in TCS5, so that the end users are not able to see the option in the help menu?
We have tried changing the value of bUsageMeasurement (HKLM\SOFTWARE\Policies\Adobe\(product name)\(version)\FeatureLockdown) to zero, but it did not help.

You’re probably going to have to contact Support on that one.

How can I disable SAP XI user authentication?

Similar Messages

Maybe you are looking for