How can I disable the advancedAntiAliasing with fontswf in sdk
Hi,
in asc2.0 we need 'fontswf' script to embed fonts instead of use .as file directly.
but here is a problem
I cannt disable the advancedAntiAliasing with fontswf ?
because I have found an issue when I set advancedAntiAliasing is true, then the textfield (which font is embeded) antiAliasType doesn't work even type is advanced. I need set advancedAntiAliasing is false (in asc1.0 you can set it by .as file)
now i just set the sharpness and thickness to workaround in used asc2.0
but i think that is not great.
so how can I disable the advancedAntiAliasing with fontswf or any other solution?
thanks
hbb
Hello -
That setting is not fully supported. You can explicitly call it like this:
./compc -include-sources ../samples/test/Main.as -output ../samples/test/Main.swf -advanced-anti-aliasing=true/false
So, that is the compiler option that you want to use in order to disable it. The example I show you here uses the command line tool but it is a valid switch via Flash Builder as well
Similar Messages
-
How can I disable the memory sharing with the video?
how can I disable the memory sharing with the graphic card? it makes me impossible to run a software, grandMA2, on windows 7 installed and run via bootcamp. where should I look for changing the preferences of memory and video, on lion or on windows7? thank you
so what do you think. I run a software on windows 7 running via bootcamp on my mbp, but I can't open it. the software is compatible with windows 7 on mac. I tried opening it as administrator or changing the compatibility options, like running it as windows xp, and changing the resolution of the video. it can't build the window and then it crashes. on internet I found a compatibility list of the software where it says please do not use any shared memory for the graphic card. what does it mean? I have just to remove the check in automatic graphics switching? what should I try to do? thank you.
-
How can I DISABLE the pop up 'Would you like to copy it to Library', preventing this message from bothering for each and every book, again and again , time after time? (Windows 7 64bit US).
I guess this may be a feature request. Adobe may think this is a good message for every new eBook.
I sure would like to decide about that myself.
Thanks in advance if this will be changed.singmk wrote:
Decided to setup the mail for exchange on my N8 so I could see my work emails. Worked like a charm but after a couple of hours decided I didn't like being that contactable so deleted the mailbox.
Now to the problem, during setup I was forced to enable the phone lock and had to pick a 7 digit alphanumeric code. Fair enough I thought and went ahead. When I removed the mailbox however the lock remained in place with the default auto time of 30 minutes. When I checked in Phone management there is no option to disable this lock so I thought I could at least change the default time to something bigger but when you try, it remains at 30 mins. You also can't disable the auto time as it pops up an error message saying can't unlock phone.
Does anyone know if I'm missing something obvious here or is this something which can't be disabled once it's switched on? I've done a soft reset back to factory settings with no luck and the only other thing I can think of is re installing the firmware which seems a bit extreme.
Would like to hope there is some way to have control over this. Can someone help?
Which firmware your N8 having now? You can check firmware by choosing Call, then type *#0000#.
My N8 works fine on security setting and able to define Phone auto lock period, by choosing Menu>Settings>Phone>Phone management>Security settings>Phone and SIM card>Phone auto lock period>User defined>Lock after(minutes)
You will prompt to enter Lock code each time u define auto lock priod or enable/disable auto lock.
Hope this can help you.
If you find this post helpful, please show your appreciation by clicking the Kudos star at the left. If it provides you the solution, please click on the GREEN Accept as Solution button at below -
How can i disable the credit card from that stolen acc and register to my new account
Hello everywone i have a big problem.. Somewone stole my apple id and changed everything (email , secret question). In that account was my credit card registered. how can i disable the credit card from that stolen acc and register to my new account ?? thanks for help
Is it an IMAP or POP account?
For POP accounts, you can select remove from server under the advanced tab of the account.
Apple support article with information on receiving a message more than once:
Mail Problems -
How can I disable the light of my keyborad?
Hello everybody!!! I wonder how can I disable the light from my keyboard. I just can change the colors in 4 differents ways but none of then can switch off the light of my keyboard. I have a GT70 2PC. Thanks for your time .
you should be able to turn off and on with FN and + to turn on then FN and the - button i think it was to turn off the backlight it's on number pad area to the right you should see light form icon showing light is on and then another 1 that is showing it's off
here is pic of marked buttons that i'm talking about. -
How can I disable the Photos app from automatically running when I plug in my iPhone?
How can I disable the Photos app from automatically running when I plug in my iPhone?
I have no intention of ever using Photos, in fact, having to abandon Aperture takes me one step close to moving back to Windows, but I digress.
I just want to NOT have to kill the Photos app every time I plug in my phone.
Thanks.I am still seeing the option Image Capture, like shown in the screenshot that Rysz posted. But it is another example of the hide-and-seek Apple likes to play with us.
The option has to be set for each device individually. With the device connected to USB, you have to click the tiny disclosure triangle in the lower left corner of the sidebar to reveal the option.
I was perfectly happy with the program I paid for (Aperture), and now to maintain the functionality I have to pay for another application (LightRoom) to get the functionality that I paid for in Aperture.
Aperture 3.6 is working well with Yosemite. I will use it, as long as I have a Mac, that will run Yosemite or a compatible system.
Have you looked at Capture One? It looks much more similar to Aperture than Lightroom. -
My ipad was stolen last night and how can i disable the device?
my Ipad was stolen last night and how can i disable the device?
Report to police along with serial number. Change all your passwords.
These links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.php
How to recover a lost or stolen iPad
http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.html
Apple Product Lost or Stolen
http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st olen
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
How to Find Your iPad Serial Number
http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
Cheers, Tom -
How can I disable the system feature which automatically restarts applications i had open during a previous session ?
When you log out, uncheck the box to reopen applications. If you're still using 10.7.3, then you will have to uncheck the back with each shutdown or restart.
10.7.4 update was suppose to fix it that when you uncheck the box, it should remain unchecked for restarts after that.
For the resume features, check this link:
http://reviews.cnet.com/8301-13727_7-20083707-263/managing-mac-os-x-lions-applic ation-resume-feature/?tag=mncol;title -
How can I disable the Keychain for an application?
How can I disable the Keychain for an application? A window pops up every time I open a page in Safari asking me for a password. I'm using a student laptop, so while I'm an administrator I lack access to a few things, such as the Keychain Access application. Is there any way to deal with this?
It's possible you may be able to trick it by creating an Applications folder in your Home directory and moving Safari to it.
I can't test this but it might work. The problem is that you would miss Safari updates, so you'd have to keep an eye out for them. Another solution may be to download another Safari and install in yourname/Applications. -
How can I disable the camera's clicking sound?
That click is irritating and pointless to me. I understand they don't want people surreptiously photographing women's beavers on subways in Tokyo and such, but that is easily overridden by simply by turning off all the iPhone's sounds completely each time with the little button on the top of the left side of the phone.
My point is, I don't want to have to silence my phone each time, and then turn it back on again after taking some pictures, which I often forget to do. So how can I disable the silly camera sound without muting the entire iPhone each and every time I use the camera?Actually in other countries, even on silent it will not mute the camera as it is their law to have camera sound.
As for here, that is only option, silent mode. -
How can I disable the setting "Needs password" in the mediathek settings?
How can I disable the setting "Needs password" in the mediathek settings for "Share my mediathek in my local network"? I unchecked it, but as soon as I opened itunes again, it was checked again. It was no problem unchecking the corresponding box with my laptop. This is important for me because otherwise I cannot watch my mediathek-content with Apple TV. Thank you for your help. Regards Klaus Hausmann
I am afraid you will just have to ignore it.
-
How can I disable the assistive touch programmatically ? This is like a bug. Though the Guided access is enabled a user can take screenshot of my application content. How can I solve this ? any idea ....
Question: Do you think the response from the support staff is correct? I mean, surely, I can't be the only CF user on a shared box whose other users need to modify the date and time within their applications. Even if they do it at the application level for their domain, surely it wouldn't affect mine, would it? That was what was implied by the support people, but I have a feeling they are way off, or covering for some goof-up on their end. I struggled like hell yesterday trying to get this to work and I did not get very far at all.
I found an interesting tutorial here which does a comparison of time zones and, theoretically, this might do the trick. But if what the guy told me was nonsense then I won't bother with it. For the record, our calendar has been working fine for about a week now. -
How can I disable the annoying orange outline while I tap a link or a input area?
i'm a user of Firefox for android. i've found a problem since I update to 16.0.2 and above. every time i tap a link or a input text in the web page, there always shows an annoying orange rectangle outline around the focused link or input area. Moreover, this outline would keep showing while I drag the page and start browsing other parts of the same page. how can I disable the annoying feature?
This is the default feature of the browser to indicate which element are you on, if you are actually on focus with the input or tapping on the right link.
Since this is a default feature of the browser, it now depends on the website's developer to override this feature with custom focus styles. Normally, in a browser, you can override this with user styles/scripts but as far as I know, Firefox Android does not support such features.
However, I found [https://support.mozilla.org/en-US/questions/929362 an article] that states that there is a [https://addons.mozilla.org/en-US/firefox/addon/stylish/ plugin] that is compatible with Firefox Android that handles user styles. -
I purchased an ablum thru itunes on my phone and it says i purchased the songs on itunes but when i go on my music it says i have to repurchase all the songs how can i get the songs with out havin to pay again
Whether you can redownload music depends upon what country that you in. If you are using your computer's iTunes then does music show in the Purchased link under Quicklinks on the right-hand side of the iTunes store home page (on your phone you might be able to redownload media via the Purchased tab in the iTunes store app) ? If music shows there, but not that album, then check to see if it's hidden : http://support.apple.com/kb/HT4919
If you aren't in a country when you can redownload music and it's still on your phone then you should be able to copy it over from the phone via File > Devices > Transfer Purchases. -
How Can We Tune the Joins with "OR" Caluse ?
Hi
We've identified one Query in one of Our PL/SQL Stored Procedure which is taking huge time to fetch the records. I have simulated the problem as shown below. The problem Is, How can i tune the Jions with "OR" Clause. i have tried replacing them with Exists Caluse, But the Performance was not much was expected.
CREATE TABLE TEST
(ID NUMBER VDATE DATE );
BEGIN
FOR i IN 1 .. 100000 LOOP
INSERT INTO TEST
VALUES
(i, TO_DATE(TRUNC(DBMS_RANDOM.VALUE(2452641, 2452641 + 364)), 'J'));
IF MOD(i, 1000) = 0 THEN
COMMIT;
END IF;
END LOOP;
END;
CREATE TABLE RTEST1 ( ID NUMBER, VMONTH NUMBER );
INSERT INTO RTEST1
SELECT ID, TO_NUMBER(TO_CHAR(VDATE,'MM'))
FROM TEST ;
CREATE TABLE RTEST2 ( ID NUMBER, VMONTH NUMBER );
INSERT INTO RTEST2
SELECT ID, TO_NUMBER(TO_CHAR(VDATE,'MM'))
FROM TEST;
CREATE INDEX RTEST1_IDX2 ON RTEST1(VMONTH)
CREATE INDEX RTEST2_IDX1 ON RTEST2(VMONTH)
ALTER TABLE RTEST1 ADD CONSTRAINT RTEST1_PK PRIMARY KEY (ID)
ALTER TABLE RTEST2 ADD CONSTRAINT RTEST2_PK PRIMARY KEY (ID)
SELECT A.ID, B.VMONTH
FROM RTEST1 A , RTEST2 B
WHERE A.ID = B.ID
AND ( (A.ID = B.VMONTH) OR ( B.ID = A.VMONTH ) )
BEGIN
DBMS_STATS.gather_table_stats(ownname => 'PHASE30DEV',tabname => 'RTEST1');
DBMS_STATS.gather_table_stats(ownname => 'PHASE30DEV',tabname => 'RTEST2');
DBMS_STATS.gather_index_stats(ownname => 'PHASE30DEV',indname => 'RTEST1_IDX1');
DBMS_STATS.gather_index_stats(ownname => 'PHASE30DEV',indname => 'RTEST2_IDX2');
DBMS_STATS.gather_index_stats(ownname => 'PHASE30DEV',indname => 'RTEST1_IDX2');
DBMS_STATS.gather_index_stats(ownname => 'PHASE30DEV',indname => 'RTEST2_IDX1');
END; Pls suggest !!!!!!! How can I tune the Joins with "OR" Clause.
Regards
RJI don't like it, but you could use a hint:
SQL>r
1 SELECT A.ID, B.VMONTH
2 FROM RTEST1 A , RTEST2 B
3 WHERE A.ID = B.ID
4* AND ( (A.ID = B.VMONTH) OR ( B.ID = A.VMONTH ) )
Execution Plan
0 SELECT STATEMENT Optimizer=CHOOSE (Cost=94 Card=2 Bytes=28)
1 0 TABLE ACCESS (BY INDEX ROWID) OF 'RTEST2' (Cost=94 Card=1 Bytes=7)
2 1 NESTED LOOPS (Cost=94 Card=2 Bytes=28)
3 2 TABLE ACCESS (FULL) OF 'RTEST1' (Cost=20 Card=100000 Bytes=700000)
4 2 BITMAP CONVERSION (TO ROWIDS)
5 4 BITMAP AND
6 5 BITMAP CONVERSION (FROM ROWIDS)
7 6 INDEX (RANGE SCAN) OF 'RTEST2_PK' (UNIQUE)
8 5 BITMAP OR
9 8 BITMAP CONVERSION (FROM ROWIDS)
10 9 INDEX (RANGE SCAN) OF 'RTEST2_IDX1' (NON-UNIQUE)
11 8 BITMAP CONVERSION (FROM ROWIDS)
12 11 INDEX (RANGE SCAN) OF 'RTEST2_PK' (UNIQUE)
Statistics
0 recursive calls
0 db block gets
300332 consistent gets
0 physical reads
0 redo size
252 bytes sent via SQL*Net to client
235 bytes received via SQL*Net from client
2 SQL*Net roundtrips to/from client
0 sorts (memory)
0 sorts (disk)
2 rows processed
SQL>SELECT /*+ ordered use_hash(b) */ A.ID, B.VMONTH
2 FROM RTEST1 A, RTEST2 B
3 WHERE A.ID = B.ID AND(A.ID = B.VMONTH OR B.ID = A.VMONTH)
4 ;
Execution Plan
0 SELECT STATEMENT Optimizer=CHOOSE (Cost=175 Card=2 Bytes=28)
1 0 HASH JOIN (Cost=175 Card=2 Bytes=28)
2 1 TABLE ACCESS (FULL) OF 'RTEST1' (Cost=20 Card=100000 Bytes=700000)
3 1 TABLE ACCESS (FULL) OF 'RTEST2' (Cost=20 Card=100000 Bytes=700000)
Statistics
9 recursive calls
0 db block gets
256 consistent gets
156 physical reads
0 redo size
252 bytes sent via SQL*Net to client
235 bytes received via SQL*Net from client
2 SQL*Net roundtrips to/from client
0 sorts (memory)
0 sorts (disk)
2 rows processed
Maybe you are looking for
-
How to call a Https Web service client (partner link)
Hi, I am trying to call a https web service and having issues with it. I have copied the server certificate into my JDeveloper truststore as well as into OC4J truststore. I have successfully deployed the application but when I initiate the process an
-
Before I changed internet service providers, I could type my search queries into the url bar and receive search results from Google. After I switched ISPs, my queries typed into the url bar are put into my new ISP's horrible search engine. How do I c
-
FI_GL Line items-Opening Balance
Hi Frieds, We have installed 0FI_GL_4 datasource and loaded data 0FIGL_O02 DSO. We have bulit a cube based the 0FIGL_O02 and passing the data from 0FIGL_O02 to Newly created custom cube. We are now building report called Trail Balance. In the report
-
Where's the double click the menu bar to minimize?
In Lion, I can no longer double click a window menu bar to minimize it. I can't find an option in the System Preferences for it. Is it really gone or can I just not find it? Thanks
-
What's the equivalent of Windows' Alt+F in OSX?
Hi all, Noob questions... What's the equivalent of Alt+F (too choose the File menu) in OS X? -Al