How can I display a CreateTimeSpan variable?

I am trying to figure out how to properly output a variable
that was created using CreateTimeSpan in a readable format. Here is
the initial code:
<cfset MyTime = #CreateTimeSpan(0,0,30,0)#>
And lower on the page:
<cfouput>#MyTime#</cfoutput>
Which unfortunately results in showing this:
0.0208333333333
But I want it to show as
30 minutes
Without going into too much detail, the short is I am trying
to output this for the user and only need to know how I can format
0.0208333333333 to the appropriate amount of time *i.e. 30 minutes,
2 hours 30 minutes, 2 days, etc.
Any help on this is greatly appreciated!

Well you weren't as far off as you think :). Initially I was
going to want to do it so it dynamically figured if it should
display as days, hours, minutes, etc....but I decided that was good
enough for the moment.
Also I do intend to allow the admin user to indicate the
timeout value, but not as you might think. Basically I have an
/install/ folder which will automatically launch if value on
application.cfm
<cfparam name="application.install" default="FALSE">
Within that set of self contained pages, it will take them
through a series of questions and the end results will:
1. Test database connection.
2. Allow them to indicate whether they want to offer support
or not (i.e. can indicate a support email address and if so, then a
support form shows within the admin tools + sends out automated
emails on any errors).
3. Allow them to indicate their own time out value.
Upon completion of all of these things, it will then either
write to the application.cfm OR if CFFILE is turned off, give them
the code to copy and paste into the application.cfm, save and
upload...which in turn includes the timeout variable.
I am extremely thorough on my applications and previously at
bottom of the page had it hard coded as "will time out in 30
minutes" but decided that should be determined during install and
dynamically show.
Have lots of work to do on that application before launch
yet, so I didn't want to waste too much time on that single item
:). THanks again!

Similar Messages

  • How can I display a changing variable in a subvi on the front panel of the main vi as the subvi is excuting

    In the document attached the vi on the right is sub to the vi on the left. On the subvi on the right the variable "Field Reading" is continuously updated on the front panel of the subvi as the "for" loop is executed, but only the last value of the variable is updated on the main vi front panel which is what is expected. My question is how can I display the changing value of "Field Reading" on the main vi front panel as the "for" loop in the subvi is running?
    Thank you.
    Solved!
    Go to Solution.
    Attachments:
    Doc2.docx ‏554 KB

    Hopefully I can explain it well enough. It really is simple.
    1) Create an empty global variable and call it something like User Interface References.vi
    2) For each and every control and indicator on your front panel, right-click and select Create/Reference
    3) Place these references wherever you like (I use a series of Event cases to perform my initialisation and these all live in one of these event cases). They can be placed anywhere in the main vi.
    4) For each of the references, right-click and select Create/Indicator
    5) Moving to the front panel, Cut all the indicators and Paste them in the global variable (eg. User Interface References.vi)
    6) Moving back to the block diagram, wire the global variable to each of the references and select the same named global variable.
    All the hard work is now done (until you add another user interface terminal). You should now have something that look as shown below, [except the reference labels would be to the left (not sure why the snippet put them above)]. In my latest program I have 82 references!
    Done. You can now access all your front panel controls and indicators anywhere in your program as shown below.
    You can just select Value in most cases, but in this particular case I wanted to fire off an Event to do some things (log the alarm) as well as just update the value. So, this is another bonus with the method.
    Hopefully this all makes sense. If not, let me know.

  • How can I display a formula variable in the report?

    Hi,
    I have a requirement to display a formula variable value in the report. When the user runs a report this variable value should be called once and displayed below the report title or in a specified cell. Is it possible something like this could be done? if yes, can someone tell me how can I achieve this functionality. I appreciate your time and effort with points.
    Thanks,
    Rao.

    Hi Bhanu,
    In the query properties you can only see text variables and not the formula variables. If I define my number of working days as text variable and I can display in the report. However, I need to use this variable in some calculation in the report, so it has to be formula variable in order to use in calculations. I appreciate your input with points.
    Thanks,
    Rao.

  • How can i display the presentation variable in my reports

    Was facing a problem to display the Presentation variable on my report, however i managed to display it on answers, but when i try to display it on my Publisher report it doesnt shows any data.
    I use to Select the Values From my prompt, and it shows the Reflection of Presentation Variable on my Answers Report. but i cannot see the Reflection of data on my Publisher Report Please any One Can help me with this.

    Removing '' does not work it given the following error
    "State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 27002] Near <@>: Syntax error [nQSError: 26012] . (HY000)"
    and by adding space you mean that I use it as '@{ BbranchCode}'?
    What I am doing at the moment is
    1. Write the given query in oracle BI Answers.
    2. Made a dashboard prompt in Answers.
    3. Made a report in dashboard using the Answers report and the dashboard prompt.
    Up till this step it works perfectly fine and the data displayed in manipulated on the basis of the values selected in the prompt.
    4. Now what I want is to display this report in Dashboards using oracle BI publisher. For that I use the template builder provided for microsoft word.
    5. I login to that add-on, open the answers report where I can see the field in the rowset. I select that field and save the template.
    6. I open the oracle BI publisher and make a new reprt with data model of the answer's report and Layout of the one I just created.
    7. I open the dashboard and put in the BI publisher report in the same page in which the asnwers report and the prompt was.
    8. Upon changing the values of the prompt the report in the answers is still getting manipulated but I am not able to see its reflection of the BI publisher report.
    The thing is that I am currently using this presentation variable to manipulate my reports in dashbords using dashboard prompts. The report is built in oracle BI Answers and it is working perfectly fine with it. Now when I use the template builder for Microsoft Word and open the template with the answers's report of this query I see the field in the row set but when I display the template in the dason the bases of this presentation variable the report in the oracle BI Answers is getting updated when I change values but when I use the template builder for microsoft word the the field is being shown in the row set.

  • How can I display char if a variable is null

    Hi All,
    How can I display char if a variable is null  in sap business object
    item name
    Office Visits
    Non-Emergency ED Utilization
    Non-Preferred Pharmacy
    above items are value and they are populating for this month but form next month "Inpatient Stays" a new item will add at database level
    i want to display this item with current month
    final result should be
    item name
    Office Visits
    Non-Emergency ED Utilization
    Non-Preferred Pharmacy
    Inpatient Stays
    i have tried with ISNULL function but it is not working
    please help i am using SAP BO 3.1
    Thanks in Advance
    Ranjeet

    You should be able to findout NULL using isnull([object]) function.. at report layer..
    Try with the below formula which should work for you
    =If Isnull(trim([object])) then "Inpatient Stays" else [Object]

  • How can i display recent update/delete/insert records in form

    Hai !!!!
    i am new for forms,.......any body tell me, how can i display recent no of records updated or no of records deleted or no of records are inserted in a form. these records count are display in display items....give me detail explination......
    Subbu.....

    the easiest way is copy and paste the oracle-forms example from the OU.
    You need form-level-trigger ON-ERROR + ON-MESSAGE, POST-INSERT, POST-UPDATE, POST-DELETE, three global variables and a procedure:
    ON-ERROR
    handle_message( error_code, 'ERROR: ' || ERROR_TYPE || '-' || TO_CHAR(ERROR_CODE) ||': '|| ERROR_TEXT );
    ON-MESSAGE
    handle_message( message_code, MESSAGE_TYPE || '-' || TO_CHAR(MESSAGE_CODE) || ': ' || MESSAGE_TEXT );
    PROCEDURE handle_message( message_number IN NUMBER, message_line IN VARCHAR2 ) IS
    BEGIN
        IF message_number IN ( 40400, 40406, 40407 )
        THEN
          DEFAULT_VALUE( '0', 'GLOBAL.insert' );
          DEFAULT_VALUE( '0', 'GLOBAL.update' );
          DEFAULT_VALUE( '0', 'GLOBAL.delete' );
          MESSAGE('Save Ok: ' ||
            :GLOBAL.insert || ' records inserted, ' ||
           :GLOBAL.update || ' records updated, ' ||
           :GLOBAL.delete || ' records deleted !!!' );
          ERASE('GLOBAL.insert'); 
          ERASE('GLOBAL.update');
          ERASE('GLOBAL.delete');
        ELSE
             MESSAGE(message_line );
              END IF;
    END;
    POST-INSERT
    DEFAULT_VALUE('0', 'GLOBAL.insert');
    :GLOBAL.insert := TO_CHAR( TO_NUMBER( :GLOBAL.insert ) + 1 );
    POST-UPDATE
    DEFAULT_VALUE('0', 'GLOBAL.update');
    :GLOBAL.update := TO_CHAR( TO_NUMBER( :GLOBAL.update ) + 1 );
    POST-DELETE
    DEFAULT_VALUE('0', 'GLOBAL.delete');
    :GLOBAL.delete := TO_CHAR( TO_NUMBER( :GLOBAL.delete ) + 1 );try it
    Gerd

  • How can i display days(Feb 28,Mar 30&April 31...Dec) in layout

    Hi Experts,
    i am facing smal problem if you have any solution please can you respond...
    this is my requirement :
    i am calaculating days for each month using funtion module.
    once i'll get those days (eg:28 days,30 days 31 days depends upon month)how can i display days in ayout ????.
    what steps i have to follow????how can i desing in data column for display of my month days??
    i'll assign full points..
    Thanks.

    Hi Bindu,
    Here is the my full code of FM.
    in this function module input value is another variabel i am passing that variable value to FM(it is fine).
    export parameters is : REFERENCE(BEGINDATE) TYPE  SY-DATUM
                                     REFERENCE(ETO_CHARSEL) TYPE  UPC_YTO_CHARSEL
                                    REFERENCE(ENDDATE) TYPE  SY-DATUM
    now you can have better idea on my FM.
    FUNCTION ZDAYS_IN_MONTH.
    ""Local Interface:
    *"  EXPORTING
    *"     REFERENCE(BEGINDATE) TYPE  SY-DATUM
    *"     REFERENCE(ETO_CHARSEL) TYPE  UPC_YTO_CHARSEL
    *"     REFERENCE(ENDDATE) TYPE  SY-DATUM
      CONSTANTS:  lc_jan(2)     TYPE n VALUE '01',
                  lc_feb(2)     TYPE n VALUE '02',
                  lc_mar(2)     TYPE n VALUE '03',
                  lc_apr(2)     TYPE n VALUE '04',
                  lc_may(2)     TYPE n VALUE '05',
                  lc_jun(2)     TYPE n VALUE '06',
                  lc_jul(2)     TYPE n VALUE '07',
                  lc_aug(2)     TYPE n VALUE '08',
                  lc_sep(2)     TYPE n VALUE '09',
                  lc_oct(2)     TYPE n VALUE '10',
                  lc_nov(2)     TYPE n VALUE '11',
                  lc_dec(2)     TYPE n VALUE '12',
                  lc_days_28(2) TYPE n VALUE '28',
                  lc_days_29(2) TYPE n VALUE '29',
                  lc_days_30(2) TYPE n VALUE '30',
                  lc_days_31(2) TYPE n VALUE '31'.
      DATA:  lv_hlp_date_year TYPE i,
             lv_hlp_rest      TYPE i,
             iv_date TYPE D,
             iv_month(2) type C,
             iv_year(4) type C,
             lsr_var TYPE REF TO cl_sem_variable,
            enddate  TYPE upc_yto_charsel,
             l_area            TYPE upc_y_area,
             l_co_area_var     TYPE upc_y_variable,
             lto_value         TYPE upc_yto_charsel,
             lso_value         TYPE upc_ys_charsel,
             i_month(6) type c,
             i_area(8) type c.
            count type i,
            lv_days type i.
       i_area = 'ZNTEST1'.
       l_co_area_var = 'ZVC0123'.
    PERFORM instantiate_object USING    i_area
                                        l_co_area_var
                                 CHANGING lsr_var.
    PERFORM get_current_value_of_variable
                            USING lsr_var
                            CHANGING lto_value.
    READ TABLE lto_value INTO lso_value INDEX 1.
    i_month = lso_value-low.
    iv_month = i_month+4(2).
    iv_year = i_month(4).
    concatenate iv_year iv_month '01' into iv_date.
    begindate = iv_date.
    CALL FUNCTION 'SLS_MISC_GET_LAST_DAY_OF_MONTH'
      EXPORTING
        DAY_IN                  = iv_date
    IMPORTING
       LAST_DAY_OF_MONTH       = enddate
    EXCEPTIONS
      DAY_IN_NOT_VALID        = 1
      OTHERS                  = 2
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    DATA:BEGIN OF itb OCCURS 0,
              dates LIKE sy-datum,
           END OF itb.
    DATA: w_date LIKE sy-datum.
                                                         comment* Data: w_date type UPC_YTO_CHARSEL.
    CLEAR:w_date.
    WHILE w_date < enddate .
      w_date = ( begindate + ( sy-index - 1 ) ).
      itb-dates = w_date.
      APPEND itb.
      CLEAR itb.
    ENDWHILE.
    LOOP AT itb.
      MOVE itb-dates TO w_date.
    ENDLOOP.
    can you help me this is very urgent.
    Edited by: Eyda rose on May 23, 2008 3:21 PM

  • How can I display XSLT transformer errors on a web page ?

    Hi,
    I have some JSP pages that access DB, create an XML based on DB data and then transform it into HTML through an XSLT stylesheet. Developing the XSL code it's easy to make mistakes and generate errors on trasformation, but what I receive on the web page is only a "Could not compile stylesheet" TransformerConfigurationException, while the real cause of the error is displayed only on tomcat logs. This is the code for transformation:
    static public void applyXSLT(Document docXML, InputStream isXSL, PrintWriter pw) throws TransformerException, Exception {
            // instantiate the TransformerFactory.
            TransformerFactory tFactory = TransformerFactory.newInstance();
            // creates an error listener
            XslErrorListener xel = new XslErrorListener();
            // sets the error listener for the factory
            tFactory.setErrorListener(xel);
            // generate the transformer
            Transformer transformer = tFactory.newTransformer(new SAXSource(new InputSource(isXSL)));
            // transforms the XML Source and sends the output to the HTTP response
            transformer.transform(new DOMSource(docXML), new StreamResult(pw));
    }If an exception is thrown during the execution of this code, its error message is displayed on the web page.
    This is the listener class:
    public class XslErrorListener implements ErrorListener {
        public XslErrorListener() {
        public void warning(TransformerException ex) {
            // logs on error log
            System.err.println("\n\nWarning on XEL: " + ex.getMessage());
        public void error(TransformerException ex) throws TransformerException {
            // logs on error log
            System.err.println("\n\nError on XEL: " + ex.getMessage());
            // and throws it
            throw ex;
        public void fatalError(TransformerException ex) throws TransformerException {
            // logs on error log
            System.err.println("\n\nFatal Error on XEL: " + ex.getMessage());
            // and throws it
            throw ex;
    }When I have an error in the XSL stylesheet (for examples a missing closing tag), I can find on tomcat logs the real cause of the error:
    [Fatal Error] :59:10: The element type "table" must be terminated by the matching end-tag "</table>".
    Error on XEL: The element type "table" must be terminated by the matching end-tag "</table>".but on my web page is reported just the TransformerConfigurationException message that is:
    "Could not compile stylesheet".
    How can I display the real cause of the error directly on the web page?
    Thanks,
    Andrea

    This code is part of a bigger project that let developers edit XSL stylesheets through a file upload on the system and we can't impose the use of any tool for checking the xsl. So, I need to display the transformer error on the web page.I see. This code is part of an editorial/developmental tool for developers to create and edit XSL stylesheets.
    As part of the editorial process, XSL errors during editing can be considered a normal condition. In other words, it is normal to expect that the developers will generate XSL errors as they are developing stylesheets.
    In this light, handling the XSL transformation errors is a business requirement that you need to handle. Using the Java Exceptions mechanisms, e.g. try / catch are inappropriate to handle business requirements, in my opinion.
    I suggest that you look at how you handle the occurence of XSL errors differently than what you currently have. You need to:
    (1) capture the Transformation exception on the server;
    (2) extract the message from the exception and put it into a message that can be easily understood by the user;
    The current error message that you have going to the web browser is not useful.
    And you should not have the Transformation exception sent to the web browser either.
    What you are attempting to do with the exception is not appropriate.
    Handle the Transformation exception on the Business tier and use it to create a useful message that is then sent to the Presentation tier. In other words, do not send Java exceptions to web browser.
    />

  • How can I display True/False in my dropdownlist as "Yes" and "No"?

    Hi All,
    I want to bind a dropdownlist to a boolean value (so it's either true or false).  I'm particularly interested in using two-way binding to when the user changes from "yes" to "no" the boolean value automatically changes from "true" to "false."  But, I want the user to see "yes" and "no" as the options, rather than "true" and "false".
    How can I display "yes" and "no" and still take advantage of binding?  Or can I not use binding in this circumstance?
      -Josh

    Solution 1:
    In order to display Yes/No for True/False, you may specify labelFunction for the dropdownList.
    In MXML:
    <s:DropDownList labelFunction="myLabelFunction" />
    In actionscript:
    private var arr:ArrayCollection = new ArrayCollection(["true","false"]);
                private function mylabelFunction(item:Object):String
                    if(item.toString() == "true")
                        return "yes";
                    else return "No";
    OR
    Solution2:
    may be u can try making an array collection like
    private var arr:ArrayCollection = new ArrayCollection([{label:"yes",value:"true"},{label:"no",value:"false"}]);
    and specify labelField for the dropdownList like
    <s:DropDownList labelField="label" dataProvider="{arr}" />

  • How can I display  contacts in a relationship

    I have companies in my CRM. I have a customers/contacts in the CRM I have tied as a relationship with each companies. How can I display all the records/contacts associated with a company? I have a already created a secure zone, so the company user would have logged in. Is this possible? If not, any workaround?
    The only workaround I thought of is to use webapp to import the company data and create another web app containing the employees data. Then link both tables/webapp using datasource. But the way the client's data is structured could create a lot of problems going forward.
    Any suggestion, help will be appreciated

    The relationship feature and how companies work currently in BC is really limited. It is an association and not true relationships at the moment. You cant output a company and show all its relationships at the moment.

  • How can I display & split the audio & video from the same digitized clip?

    I digitized a scene into iMovie that I edited on a professional system which I don't have access to anymore. The whole scene is 1 clip. Now I see a few tweaks that I want to make, so I was hoping to do them in iMovie.
    I want to "pull up" the audio in one section - meaning I want to take cut about 20 frames of audio from the end of a shot, and then move all the other audio up to fill the hole. To compensate for the missing 20 frames, I'll cut video off the head of the next shot. Some call this prelapping. Some call it an L-cut. Some call it asymmetrical trimming. Either way, I can't figure out how to do it in iMovie.
    My clip appears in the timeline as one track - a single track that contains the video and 2 audio tracks. How can I display the audio that's tied to the video on its own track? Then I think I could split audio & video wherever I wanted and trim things up - but I can't figure out how to do it.
    Am I asking too much of this software?
    BTW, I never see the option to "Split audio clip at playhead". I'm not displaying clip volume or waveforms. Choosing to display waveforms doesn't show me anything. Maybe iMovie thinks I'd only want to see waveforms of audio that isn't tied to my video-and-audio clips?
    Thanks in advance for any help...

    Jordon,
    "Am I asking too much of this software?"
    No, you're not.
    You first want to select your clip(s) and choose Advanced>Extract Audio.
    This will copy the audio from the video clip and place it on one of the two separate audio tracks while lowering the audio level to zero in the original video track.
    You can now edit and move the audio independently of the video.
    With the audio clip selected, you'll find you now have access to Edit>Split Selected Audio Clip at Playhead.
    Matt

  • How can i display a list of all the names stored in the Mail app?

    When sending an email, the program shows a list of names according to the first and subsequent letters that I type into the To: field. There are times I cannot recall someone's email user name. How can I display a complete list of all the names Mail has stored? I know that I can go to the To: field then type in the letter A, then write down all listings under A, and then repeat for each letter of the alphabet, but there should be an easier method.
    I have perhaps dozens of names in Mail, but only five names in Address Book, so the latter does me no good.

    On the menubar, Mail > Window > Previous Recipients
    Regards,
    Captfred

  • How can i call another view variables in another view

    how can i call another view variables in another view and pass that variables to the function
    my situation is i have a view FAC which i need to pass par_id_fac TO THE VIEW AGR.AFTER THAT i what to take start_dt in agr view and par_id_fac from Fac and pass this variables to the function i have check the documentation but does not do what i what,the doc simply talk about creating variables and pass then to function.i what to pass variables from the views and return value to my contractno Variables value
    something like if :agr.contract_no is null
    and :agr.agr_start_dt is not null then
         :agr.contract_no := sms_fapp.get_contract_no(:fac.par_id_fac,:agr.agr_start_dt);
    end if;     
    y view is
    <?xml version="1.0" encoding="windows-1252" ?>
    <!DOCTYPE ViewObject SYSTEM "jbo_03_01.dtd">
    <!---->
    <ViewObject
      xmlns="http://xmlns.oracle.com/bc4j"
      Name="AGR"
      Version="11.1.2.60.81"
      BindingStyle="OracleName"
      CustomQuery="true"
      PageIterMode="Full"
      UseGlueCode="false"
      RowClass="sms1405.AGRRowImpl"
      ComponentClass="sms1405.AGRImpl"
      DefClass="sms1405.AGRDefImpl">
      <DesignTime>
        <Attr Name="_isExpertMode" Value="true"/>
        <Attr Name="_codeGenFlag2" Value="Access|Def|Coll|Prog|VarAccess"/>
        <Attr Name="_isCodegen" Value="true"/>
      </DesignTime>
    <SQLQuery><![CDATA[SELECT SmsAgreements.ID,
           SmsAgreements.FAPP_ID,
           SmsAgreements.PAR_ID,
           SmsAgreements.SSCH_ID,
           SmsAgreements.COSERV_ID,
           SmsAgreements.IREA_ID_TERMINATED,
           SmsAgreements.IREA_ID_SUSPENDED,
           SmsAgreements.SPTYP_ID,
           SmsAgreements.CLAIM_BASED_YN,
           SmsAgreements.NOTES,
           SmsAgreements.SUSPENSION_DT,
           SmsAgreements.TERMINATION_DT,
           SmsAgreements.SPECIAL_PROJECT_END_DT,
           SmsAgreements.CAPITAL_FUNDING_APPROVED,
           SmsAgreements.PERIODICAL_PAYMENT_AMOUNT,
           SmsAgreements.DATE_CREATED,
           SmsAgreements.DATE_MODIFIED,
           SmsAgreements.MODIFIED_BY,
           SmsAgreements.CREATED_BY,
           SmsAgreements.CONTRACT_NO,
           SmsAgreements.OFF_ID,
           SmsAgreements.DATE_APPROVED,
           SmsAgreements.AGR_START_DT,
           SmsAgreements.AGR_END_DT,
           SmsAgreements.MONTHS_FUNDED,
           SmsAgreements.PFRE_ANNUAL_FREQUENCY,
           SmsAgreements.FUNDED_NO,
           SmsAgreements.REGISTERED_NO,
           SmsAgreements.CONTRACT_NAME,
           SmsAgreements.OPEX_ALLOCATION,
           SmsAgreements.EMERG_ORG_YN,
           SmsAgreements.SCHEDULE,
           SmsAgreements.PERIODICAL_PAYMENT_AVERAGE,
           SmsAgreements.NO_OF_PAYMENTS,
           SmsAgreements.ADVANCE_PAYMENT_PERCENT,
           SmsAgreements.QUALIFY_NO,
           SmsAgreements.ENROLLED_NO,
           SmsAgreements.MULTI_YEAR_ALLOCATION,
           SmsAgreements.AGR_ID_SOURCE,
           SmsAgreements.FYEA_YEAR_ACTIVE,
           SmsAgreements.PTYPE_CODE,
           SmsAgreements.CONTRACT_VALUE,
           SmsAgreements.MAGR_ID,
           SmsAgreements.PROG_ID,
           SmsAgreements.EMERGENCY_BED_#,
           SmsAgreements.drep_id,
           SmsAgreements.srep_id,
           (select name from sms_offices off where off.id = SmsAgreements.off_id)officeName,
           (SELECT  PROG.NAME FROM   sms_programmes prog where PROG.ID = SMSAGREEMENTS.PROG_ID)programe,
           (select prog.code || '.' || bvspro.code || '  ' || bvspro.NAME budget_vote   from sms_subsidy_schemes ssch,
              sms_budget_vote_sub_programs bvspro,
              sms_programmes prog
              WHERE bvspro_id = bvspro.ID AND prog.ID = prog_id
              and prog.id = SMSAGREEMENTS.PROG_ID)Sub_programme,
             (select  ssch.NAME from sms_subsidy_schemes ssch where SSCH.ID = SMSAGREEMENTS.SSCH_ID)subsidy,
           (SELECT master_contract FROM  sms_master_agreements magr WHERE MAGR.ID = SmsAgreements.magr_id)masterContract
    FROM SMS_AGREEMENTS SmsAgreements]]></SQLQuery>
      <ViewAttribute
        Name="ContractNo"
        IsPersistent="false"
        IsNotNull="true"
        PrecisionRule="true"
        Precision="20"
        Type="java.lang.String"
        ColumnType="VARCHAR2"
        AliasName="CONTRACT_NO"
        SQLType="VARCHAR">
        <TransientExpression><![CDATA[CONTRACT_NO]]></TransientExpression>
        <DesignTime>
          <Attr Name="_DisplaySize" Value="20"/>
        </DesignTime>
      </ViewAttribute>
    <ViewAttribute
        Name="AgrStartDt"
        IsPersistent="false"
        PrecisionRule="true"
        Type="java.sql.Timestamp"
        ColumnType="DATE"
        AliasName="AGR_START_DT"
        SQLType="DATE">
        <RecalcCondition><![CDATA[true]]></RecalcCondition>
        <TransientExpression><![CDATA[adf.currentDate]]></TransientExpression>
      </ViewAttribute>
    </ViewObject>and my FAC view is
    <?xml version="1.0" encoding="windows-1252" ?>
    <!DOCTYPE ViewObject SYSTEM "jbo_03_01.dtd">
    <!---->
    <ViewObject
      xmlns="http://xmlns.oracle.com/bc4j"
      Name="FAC"
      Version="11.1.2.60.81"
      BindingStyle="OracleName"
      CustomQuery="true"
      PageIterMode="Full"
      UseGlueCode="false">
      <DesignTime>
        <Attr Name="_isExpertMode" Value="true"/>
      </DesignTime>
      <SQLQuery><![CDATA[SELECT SmsFacilityVw.PAR_ID_ORG,
           SmsFacilityVw.ORGANISATION,
           SmsFacilityVw.ORG_KEY,
           SmsFacilityVw.C_CODE,
           SmsFacilityVw.FACILITY,
           SmsFacilityVw.PAR_ID_FAC,
           SmsFacilityVw.NPO_REGISTRATION_NO,
           SmsFacilityVw.ADDRESS,
           SmsFacilityVw.TELNR_WORK,
           SmsFacilityVw.ADDRESSLINE,
           SmsFacilityVw.Town,
           SmsFacilityVw.Suburb,
           SmsFacilityVw.PostalCode,
           SmsFacilityVw.DSD_REGION,
           SmsFacilityVw.SERVICE_DELIVERY_AREA,
           SmsFacilityVw.FAXNR,
           SmsFacilityVw.EMAIL,
           SmsFacilityVw.PAR_TYPE_DEF
    FROM SMS_FACILITY_VW SmsFacilityVw]]></SQLQuery>
      <ViewAttribute
        Name="ParIdOrg"
        IsUpdateable="false"
        IsPersistent="false"
        PrecisionRule="true"
        Precision="38"
        Scale="0"
        Type="java.math.BigInteger"
        ColumnType="NUMBER"
        AliasName="PAR_ID_ORG"
        Expression="PAR_ID_ORG"
        SQLType="NUMERIC"/>
      <ViewAttribute
        Name="Organisation"
        IsUpdateable="false"
        IsPersistent="false"
        PrecisionRule="true"
        Precision="100"
        Type="java.lang.String"
        ColumnType="VARCHAR2"
        AliasName="ORGANISATION"
        Expression="ORGANISATION"
        SQLType="VARCHAR">
        <DesignTime>
          <Attr Name="_DisplaySize" Value="100"/>
        </DesignTime>
      </ViewAttribute>
      <ViewAttribute
        Name="OrgKey"
        IsUpdateable="false"
        IsPersistent="false"
        PrecisionRule="true"
        Precision="10"
        Type="java.lang.String"
        ColumnType="VARCHAR2"
        AliasName="ORG_KEY"
        Expression="ORG_KEY"
        SQLType="VARCHAR">
        <DesignTime>
          <Attr Name="_DisplaySize" Value="10"/>
        </DesignTime>
      </ViewAttribute>
      <ViewAttribute
        Name="CCode"
        IsUpdateable="false"
        IsPersistent="false"
        PrecisionRule="true"
        Precision="30"
        Type="java.lang.String"
        ColumnType="VARCHAR2"
        AliasName="C_CODE"
        Expression="C_CODE"
        SQLType="VARCHAR">
        <DesignTime>
          <Attr Name="_DisplaySize" Value="30"/>
        </DesignTime>
      </ViewAttribute>
      <ViewAttribute
        Name="Facility"
        IsUpdateable="false"
        IsPersistent="false"
        PrecisionRule="true"
        Precision="100"
        Type="java.lang.String"
        ColumnType="VARCHAR2"
        AliasName="FACILITY"
        Expression="FACILITY"
        SQLType="VARCHAR">
        <DesignTime>
          <Attr Name="_DisplaySize" Value="100"/>
        </DesignTime>
      </ViewAttribute>
      <ViewAttribute
        Name="ParIdFac"
        IsUpdateable="false"
        IsPersistent="false"
        PrecisionRule="true"
        Precision="38"
        Scale="0"
        Type="java.math.BigInteger"
        ColumnType="NUMBER"
        AliasName="PAR_ID_FAC"
        Expression="PAR_ID_FAC"
        SQLType="NUMERIC"/>
      <ViewAttribute
        Name="NpoRegistrationNo"
        IsUpdateable="false"
        IsPersistent="false"
        PrecisionRule="true"
        Precision="30"
        Type="java.lang.String"
        ColumnType="VARCHAR2"
        AliasName="NPO_REGISTRATION_NO"
        Expression="NPO_REGISTRATION_NO"
        SQLType="VARCHAR">
        <DesignTime>
          <Attr Name="_DisplaySize" Value="30"/>
        </DesignTime>
      </ViewAttribute>
      <ViewAttribute
        Name="Address"
        IsUpdateable="false"
        IsPersistent="false"
        PrecisionRule="true"
        Precision="227"
        Type="java.lang.String"
        ColumnType="VARCHAR2"
        AliasName="ADDRESS"
        Expression="ADDRESS"
        SQLType="VARCHAR">
        <DesignTime>
          <Attr Name="_DisplaySize" Value="227"/>
        </DesignTime>
      </ViewAttribute>
      <ViewAttribute
        Name="TelnrWork"
        IsUpdateable="false"
        IsPersistent="false"
        PrecisionRule="true"
        Precision="150"
        Type="java.lang.String"
        ColumnType="VARCHAR2"
        AliasName="TELNR_WORK"
        Expression="TELNR_WORK"
        SQLType="VARCHAR">
        <DesignTime>
          <Attr Name="_DisplaySize" Value="150"/>
        </DesignTime>
      </ViewAttribute>
      <ViewAttribute
        Name="Addressline"
        IsPersistent="false"
        PrecisionRule="true"
        Precision="120"
        Type="java.lang.String"
        ColumnType="VARCHAR2"
        AliasName="ADDRESSLINE"
        Expression="ADDRESSLINE"
        SQLType="VARCHAR"
        IsUpdateable="false">
        <DesignTime>
          <Attr Name="_DisplaySize" Value="120"/>
        </DesignTime>
      </ViewAttribute>
      <ViewAttribute
        Name="Town"
        IsPersistent="false"
        PrecisionRule="true"
        Precision="60"
        Type="java.lang.String"
        ColumnType="VARCHAR2"
        AliasName="TOWN"
        Expression="TOWN"
        SQLType="VARCHAR"
        IsUpdateable="false">
        <DesignTime>
          <Attr Name="_DisplaySize" Value="60"/>
        </DesignTime>
      </ViewAttribute>
      <ViewAttribute
        Name="Suburb"
        IsPersistent="false"
        PrecisionRule="true"
        Precision="60"
        Type="java.lang.String"
        ColumnType="VARCHAR2"
        AliasName="SUBURB"
        Expression="SUBURB"
        SQLType="VARCHAR"
        IsUpdateable="false">
        <DesignTime>
          <Attr Name="_DisplaySize" Value="60"/>
        </DesignTime>
      </ViewAttribute>
      <ViewAttribute
        Name="Postalcode"
        IsPersistent="false"
        PrecisionRule="true"
        Precision="4"
        Type="java.lang.String"
        ColumnType="VARCHAR2"
        AliasName="POSTALCODE"
        Expression="POSTALCODE"
        SQLType="VARCHAR"
        IsUpdateable="false">
        <DesignTime>
          <Attr Name="_DisplaySize" Value="4"/>
        </DesignTime>
      </ViewAttribute>
      <ViewAttribute
        Name="DsdRegion"
        IsUpdateable="false"
        IsPersistent="false"
        PrecisionRule="true"
        Precision="40"
        Type="java.lang.String"
        ColumnType="VARCHAR2"
        AliasName="DSD_REGION"
        Expression="DSD_REGION"
        SQLType="VARCHAR">
        <DesignTime>
          <Attr Name="_DisplaySize" Value="40"/>
        </DesignTime>
      </ViewAttribute>
      <ViewAttribute
        Name="ServiceDeliveryArea"
        IsUpdateable="false"
        IsPersistent="false"
        PrecisionRule="true"
        Precision="50"
        Type="java.lang.String"
        ColumnType="VARCHAR2"
        AliasName="SERVICE_DELIVERY_AREA"
        Expression="SERVICE_DELIVERY_AREA"
        SQLType="VARCHAR">
        <DesignTime>
          <Attr Name="_DisplaySize" Value="50"/>
        </DesignTime>
      </ViewAttribute>
      <ViewAttribute
        Name="Faxnr"
        IsUpdateable="false"
        IsPersistent="false"
        PrecisionRule="true"
        Precision="50"
        Type="java.lang.String"
        ColumnType="VARCHAR2"
        AliasName="FAXNR"
        Expression="FAXNR"
        SQLType="VARCHAR">
        <DesignTime>
          <Attr Name="_DisplaySize" Value="50"/>
        </DesignTime>
      </ViewAttribute>
      <ViewAttribute
        Name="Email"
        IsUpdateable="false"
        IsPersistent="false"
        PrecisionRule="true"
        Precision="80"
        Type="java.lang.String"
        ColumnType="VARCHAR2"
        AliasName="EMAIL"
        Expression="EMAIL"
        SQLType="VARCHAR">
        <DesignTime>
          <Attr Name="_DisplaySize" Value="80"/>
        </DesignTime>
      </ViewAttribute>
      <ViewAttribute
        Name="ParTypeDef"
        IsUpdateable="false"
        IsPersistent="false"
        PrecisionRule="true"
        Precision="12"
        Type="java.lang.String"
        ColumnType="VARCHAR2"
        AliasName="PAR_TYPE_DEF"
        Expression="PAR_TYPE_DEF"
        SQLType="VARCHAR">
        <DesignTime>
          <Attr Name="_DisplaySize" Value="12"/>
        </DesignTime>
      </ViewAttribute>
      <ViewLinkAccessor
        Name="AGR"
        ViewLink="sms1405.par_facfkViewLink"
        Type="oracle.jbo.RowIterator"
        IsUpdateable="false"/>
      <ViewLinkAccessor
        Name="SmsParAddrVwView"
        ViewLink="sms1405.parLink"
        Type="oracle.jbo.RowIterator"
        IsUpdateable="false"/>
      <ViewLinkAccessor
        Name="DOC"
        ViewLink="sms1405.FAC_DOC"
        Type="oracle.jbo.RowIterator"
        IsUpdateable="false"/>
    </ViewObject>Edited by: ADF007 on 2012/08/23 6:10 PM

    i try this
    public class SMS_AGREEMENTSImpl extends EntityImpl {
    RowSet newContractNoBeforePost = null;
        public static int NUMBER = Types.NUMERIC;
        public static int DATE = Types.DATE;
        public static int VARCHAR2 = Types.VARCHAR;
      protected Object callStoredFunction(int sqlReturnType, String stmt,
            Object[] bindVars) {
            CallableStatement st = null;
            try {
            // 1. Create a JDBC CallabledStatement
            st = getDBTransaction().createCallableStatement(
            "begin ? := "+stmt+";end;",0);
            // 2. Register the first bind variable for the return value
            st.registerOutParameter(1, sqlReturnType);
            if (bindVars != null) {
            // 3. Loop over values for the bind variables passed in, if any
            for (int z = 0; z < bindVars.length; z++) {
            // 4. Set the value of user-supplied bind vars in the stmt
            st.setObject(z + 2, bindVars[z]);
            // 5. Set the value of user-supplied bind vars in the stmt
            st.executeUpdate();
            // 6. Return the value of the first bind variable
            return st.getObject(1);
            catch (SQLException e) {
            throw new JboException(e);
            finally {
            if (st != null) {
            try {
            // 7. Close the statement
            st.close();
            catch (SQLException e) {}
        protected void doDML(int operation, TransactionEvent e) {
           String amDef = "sms1405.sms1405Module";
           String config = "sms1405ModuleShared";
              String NewContract = null;                 
            ApplicationModule am = Configuration.createRootApplicationModule(amDef, config);
            ViewObjectImpl vo = (ViewObjectImpl) am.findViewObject("AGR1");
            vo.executeQuery();
            Row row = vo.first();
            // NewContract = (String)vo
            NewContract = (String)row.getAttribute("ContractNo");
            SMS_AGREEMENTSImpl newcont = new SMS_AGREEMENTSImpl();
           //AGRRowImpl res = new  AGRRowImpl();
           // NewContract = NewContractNo();
            if (operation == 1)  {
                         newcont.setContractNo(NewContractNo());
                         //res.setContractNo( NewContractNo());   
                        //NewContractNo();
            super.doDML(operation, e);
            public void postChanges(TransactionEvent TransactionEvent) {
            /* Only bother to update references if contractno is a NEW one */
            if (getPostState() == STATUS_NEW) {
            * Get a rowset of contract related
            * to this new partyaddress before calling super
             newContractNoBeforePost  = (RowSet)getSMS_AGREEMENTS();
            super.postChanges(TransactionEvent);
        public Date getAgrStartDt() {
            return (Date)getAttributeInternal(AGRSTARTDT);
         * Sets <code>value</code> as the attribute value for AgrStartDt.
         * @param value value to set the AgrStartDt
        public void setAgrStartDt(Date value) {
            setAttributeInternal(AGRSTARTDT, value);
        public String NewContractNo() {
               String amDef = "sms1405.sms1405Module";
               String config = "sms1405ModuleShared";
               String NewContract = null;                 
               ApplicationModule am = Configuration.createRootApplicationModule(amDef, config);
               ViewObjectImpl vo = (ViewObjectImpl) am.findViewObject("FAC1");
               // vo.setWhereClause("ParIdFac = 38844");
                vo.executeQuery();
                Row row = vo.first();
               Integer par_id = null;
               //oracle.jbo.domain.Date today = new oracle.jbo.domain.Date(oracle.jbo.domain.Date.getCurrentDate());
               oracle.jbo.domain.Date today = new oracle.jbo.domain.Date();
               //FACRowImpl res = new FACRowImpl();
               //res.setParIdFac(par_id);
               par_id = (Integer)row.getAttribute("ParIdFac");
               today = this.getAgrStartDt();
           return (String)callStoredFunction(VARCHAR2,
           "sms_fapp.get_contract_no(?,?)",
           new Object[]{par_id,today});
    }at the moment am geting this error
    oracle.jbo.JboException: JBO-29000: Unexpected exception caught: java.lang.NullPointerException, msg=null
         at oracle.adf.model.binding.DCBindingContainer.reportException(DCBindingContainer.java:415)
         at oracle.adf.model.binding.DCBindingContainer.reportException(DCBindingContainer.java:477)
         at oracle.adf.model.binding.DCControlBinding.reportException(DCControlBinding.java:201)
         at oracle.jbo.uicli.binding.JUCtrlActionBinding.reportException(JUCtrlActionBinding.java:2007)
         at oracle.jbo.uicli.binding.JUCtrlActionBinding.doIt(JUCtrlActionBinding.java:1659)
         at oracle.adf.model.binding.DCDataControl.invokeOperation(DCDataControl.java:2169)
         at oracle.jbo.uicli.binding.JUCtrlActionBinding.invoke(JUCtrlActionBinding.java:731)
         at oracle.jbo.uicli.jui.JUActionBinding.actionPerformed(JUActionBinding.java:193)
         at oracle.jbo.uicli.controls.JUNavigationBar.doAction(JUNavigationBar.java:412)
         at oracle.jbo.jbotester.NavigationBar.doAction(NavigationBar.java:112)
         at oracle.jbo.uicli.controls.JUNavigationBar$NavButton.actionPerformed(JUNavigationBar.java:118)
         at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
         at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
         at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
         at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
         at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
         at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:272)
         at java.awt.Component.processMouseEvent(Component.java:6289)
         at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
         at java.awt.Component.processEvent(Component.java:6054)
         at java.awt.Container.processEvent(Container.java:2041)
         at java.awt.Component.dispatchEventImpl(Component.java:4652)
         at java.awt.Container.dispatchEventImpl(Container.java:2099)
         at java.awt.Component.dispatchEvent(Component.java:4482)
         at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4577)
         at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
         at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
         at java.awt.Container.dispatchEventImpl(Container.java:2085)
         at java.awt.Window.dispatchEventImpl(Window.java:2478)
         at java.awt.Component.dispatchEvent(Component.java:4482)
         at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:644)
         at java.awt.EventQueue.access$000(EventQueue.java:85)
         at java.awt.EventQueue$1.run(EventQueue.java:603)
         at java.awt.EventQueue$1.run(EventQueue.java:601)
         at java.security.AccessController.doPrivileged(Native Method)
         at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
         at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:98)
         at java.awt.EventQueue$2.run(EventQueue.java:617)
         at java.awt.EventQueue$2.run(EventQueue.java:615)
         at java.security.AccessController.doPrivileged(Native Method)
         at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:614)
         at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
         at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
    Caused by: java.lang.NullPointerException
         at oracle.jbo.server.EntityImpl.getEntityCache(EntityImpl.java:4665)
         at oracle.jbo.server.EntityImpl.saveEventOrigTransAttrVals(EntityImpl.java:729)
         at oracle.jbo.server.EntityImpl.saveEventOrigAttrVals(EntityImpl.java:719)
         at oracle.jbo.server.EntityImpl.setAttributeInternal(EntityImpl.java:1935)
         at sms1405.SMS_AGREEMENTSImpl.setContractNo(SMS_AGREEMENTSImpl.java:998)
         at sms1405.SMS_AGREEMENTSImpl.doDML(SMS_AGREEMENTSImpl.java:1628)
         at oracle.jbo.server.EntityImpl.postChanges(EntityImpl.java:6751)
         at sms1405.SMS_AGREEMENTSImpl.postChanges(SMS_AGREEMENTSImpl.java:1645)
         at oracle.jbo.server.DBTransactionImpl.doPostTransactionListeners(DBTransactionImpl.java:3264)
         at oracle.jbo.server.DBTransactionImpl.postChanges(DBTransactionImpl.java:3067)
         at oracle.jbo.server.DBTransactionImpl.commitInternal(DBTransactionImpl.java:2071)
         at oracle.jbo.server.DBTransactionImpl.commit(DBTransactionImpl.java:2352)
         at oracle.adf.model.bc4j.DCJboDataControl.commitTransaction(DCJboDataControl.java:1590)
         at oracle.adf.model.binding.DCDataControl.callCommitTransaction(DCDataControl.java:1415)
         at oracle.jbo.uicli.binding.JUCtrlActionBinding.doIt(JUCtrlActionBinding.java:1428)
         ... 43 more
    ## Detail 0 ##
    java.lang.NullPointerException
         at oracle.jbo.server.EntityImpl.getEntityCache(EntityImpl.java:4665)
         at oracle.jbo.server.EntityImpl.saveEventOrigTransAttrVals(EntityImpl.java:729)
         at oracle.jbo.server.EntityImpl.saveEventOrigAttrVals(EntityImpl.java:719)
         at oracle.jbo.server.EntityImpl.setAttributeInternal(EntityImpl.java:1935)
         at sms1405.SMS_AGREEMENTSImpl.setContractNo(SMS_AGREEMENTSImpl.java:998)
         at sms1405.SMS_AGREEMENTSImpl.doDML(SMS_AGREEMENTSImpl.java:1628)
         at oracle.jbo.server.EntityImpl.postChanges(EntityImpl.java:6751)
         at sms1405.SMS_AGREEMENTSImpl.postChanges(SMS_AGREEMENTSImpl.java:1645)
         at oracle.jbo.server.DBTransactionImpl.doPostTransactionListeners(DBTransactionImpl.java:3264)
         at oracle.jbo.server.DBTransactionImpl.postChanges(DBTransactionImpl.java:3067)
         at oracle.jbo.server.DBTransactionImpl.commitInternal(DBTransactionImpl.java:2071)
         at oracle.jbo.server.DBTransactionImpl.commit(DBTransactionImpl.java:2352)
         at oracle.adf.model.bc4j.DCJboDataControl.commitTransaction(DCJboDataControl.java:1590)
         at oracle.adf.model.binding.DCDataControl.callCommitTransaction(DCDataControl.java:1415)
         at oracle.jbo.uicli.binding.JUCtrlActionBinding.doIt(JUCtrlActionBinding.java:1428)
         at oracle.adf.model.binding.DCDataControl.invokeOperation(DCDataControl.java:2169)
         at oracle.jbo.uicli.binding.JUCtrlActionBinding.invoke(JUCtrlActionBinding.java:731)
         at oracle.jbo.uicli.jui.JUActionBinding.actionPerformed(JUActionBinding.java:193)
         at oracle.jbo.uicli.controls.JUNavigationBar.doAction(JUNavigationBar.java:412)
         at oracle.jbo.jbotester.NavigationBar.doAction(NavigationBar.java:112)
         at oracle.jbo.uicli.controls.JUNavigationBar$NavButton.actionPerformed(JUNavigationBar.java:118)
         at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
         at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
         at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
         at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
         at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
         at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:272)
         at java.awt.Component.processMouseEvent(Component.java:6289)
         at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
         at java.awt.Component.processEvent(Component.java:6054)
         at java.awt.Container.processEvent(Container.java:2041)
         at java.awt.Component.dispatchEventImpl(Component.java:4652)
         at java.awt.Container.dispatchEventImpl(Container.java:2099)
         at java.awt.Component.dispatchEvent(Component.java:4482)
         at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4577)
         at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
         at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
         at java.awt.Container.dispatchEventImpl(Container.java:2085)
         at java.awt.Window.dispatchEventImpl(Window.java:2478)
         at java.awt.Component.dispatchEvent(Component.java:4482)
         at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:644)
         at java.awt.EventQueue.access$000(EventQueue.java:85)
         at java.awt.EventQueue$1.run(EventQueue.java:603)
         at java.awt.EventQueue$1.run(EventQueue.java:601)
         at java.security.AccessController.doPrivileged(Native Method)
         at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
         at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:98)
         at java.awt.EventQueue$2.run(EventQueue.java:617)
         at java.awt.EventQueue$2.run(EventQueue.java:615)
         at java.security.AccessController.doPrivileged(Native Method)
         at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:614)
         at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
         at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)

  • How can I display more than one value in Calendar ?

    Hi,
    the standard (example) script allows for the display of one value only (as I understood). How can I display two or three values, from the very same table ? Students of mine during an HTMLDB workshop in Leipzig did ask that question.
    Do we have a more detailed docum. on the use of the calendar ?
    pls kindly advise. TIA.
    Bernhard

    my solution:
    Source fo the calendar starts:
    snip>
    declare
    q varchar(32767) := null;
    begin
    q := 'select "ETA", <--- Date Field and concatination of fields as follows:
    "SCHIFFSNAME"|| "ETA_TIME"|| "TERMINAL"||''(br*)'',
    null,
    null,
    null,
    null
    from "#OWNER#"."SCHEDULE"'; . . . . . . .
    snip>
    comment on (br*) - you have to use "<" and ">" instead of "( " and ")" to have the "break/new line effect"
    brgds
    Bernhard

  • How can I display images that are not included in any collection?

    How can I display images that are not included in any collection (some filter or smart collection)? A smart collection with parameters "Collection - contains - empty field" does not work. Lightroom 5.

    Thank you! Good idea! I ordered letters of the alphabet (space separated), and it works.

Maybe you are looking for

  • Cant open Safari, AppStore. Error Message "Safari quit unexpectedly while using the WebKit2 plug-in." Please help

    Help me out guys why is this doing this? I just downloaded Maverick a couple days ago. Today I noticed Safari was really erratic, running fast one webpage then the next very slowwwwwwwww loading or not loading a page at all. Sometimes reloading worke

  • Root element required

    SDNers, I have created a message type in XI and have exported the XSD. When I try to import the XSD in the syndicator, I get an error message: Root element required. Thanks in advance. + JT

  • Xfa.host.resetData() error message

    Some users, but not all, are getting an error message "Please select the Client's locale" when they press a button that has a single line of code on its click event: xfa.host.resetData(). The button has the default locale selected in its properties.

  • East Asian Language problem

    Hi, I'm trying to put thai language on my phone.  In the desktop manager, it's showing that I installed both the thai input and characters, but when I go to the options on my phone, thai isn't coming up.  Any ideas??

  • Problems Syncing - greyed out playlist

    There is one particular album I am trying to sync to my iphone which I imported and it shows on itunes on the playlist of my iphone but the songs seem greyed out and there are dotted circles next to all songs by the track numbers and it just doesnt s