How can I display an e-mail when the message is in HTML?

I occasionally receive e-mails whose messages are in HTML.
They're unreadable unless I save them outside thunderbird as files with the .html extension and open them in firefox.
Is there some less cumbersome way of reading them directly in thunderbird itself?
Linux Mint Debian Edition

View - Message Body As - Original HTML

Similar Messages

How can I turn off "reply" button when the messages come? I prefer the "open" button.

How can I turn off "reply" button when the messages come? I prefer the "open" button. Because my friends usually send lots of messages at the same time so I cannot read all of them when I press "reply", then I have to go to Messages -> my friends' messages, and it's really complicated.

Sorry for not quite understanding. I guess you are referring to a notice in an alert. I do not have that alert active on my device, so I cannot say. I use the banner alert, so I just get a notice of a message and can swipe to open that particular message. If I ignore it, it will eventually go away.

How can I block spam e-mail when the "from address" keeps changing?

How can I block a spam mail sender when that spamer uses a different e-mail address everytime! I have set up a rule with the spamers name (which does not change) and setting the rule to "is equal to" but it is not working.

deckersmom
Verizon can't fix it and yahoo can't change your Samsung application function.
Just use the free Yahoo app.
i Have a yahoo and Gmail and use separate apps for this reason.

How can I purchase items for app when the app was loaded on another ID before? I has to Chang my AppleID and also transferred an app to new phone. I can't purchase items for app because it wants me to buy the app through new ID. The app was free.

How can I purchase items for app when the app was loaded on another ID before? I has to Chang my AppleID and also transferred an app to new phone. I can't purchase items for app because it wants me to buy the app through new ID. The app was free.

All apps (and other content from the store) are tied to the account that downloaded them, whether or not they are free. To do in-app purchases in that app you will either need to log in with the account that downloaded it, or delete it (which will delete its content) and download it with your currently logged in account if you want to do IAPs on that account.

How can i display a list of all the names stored in the Mail app?

When sending an email, the program shows a list of names according to the first and subsequent letters that I type into the To: field. There are times I cannot recall someone's email user name. How can I display a complete list of all the names Mail has stored? I know that I can go to the To: field then type in the letter A, then write down all listings under A, and then repeat for each letter of the alphabet, but there should be an easier method.
I have perhaps dozens of names in Mail, but only five names in Address Book, so the latter does me no good.

On the menubar, Mail > Window > Previous Recipients
Regards,
Captfred

How can I get my e-mails when I get a message that the folder inbox is full?

I can't get my e-mail and the e-mails in my inbox have disappeared from Thunderbird, (but not from my server's web mail), so I can't divide it into several folders on Thunderbird to alleviate the problem. I don't know what happened to my old e-mails and I can't get new ones. I did go to my server's web site and deleted a huge number of e-mails there, but that didn't solve the problem. In fact, I wonder if this procedure caused my inbox to somehow disappear in Thunderbird.
I get a message that says "The folder inbox is full and can't any more messages. To make room for more messages delete any old or unwanted mail and compact the folder."
I have a new Mac with Maverick. However, in case this matters, all of my old files were migrated to the new Mac, including e-mails. Most of the old e-mails are in a separate folder, however. How can I restore my inbox and also get new e-mails?
Thank you very much.
I just thought of something else. I just changed my password with the server. Could this be the problem? I am able to *send* e-mail with Thunderbird, however.
rteach1

Technically the limit of 4Gb per folder should have been removed in a recent patch. Personally I an unconvinced as the developers have said so twice before and something else arose to bite people at 4Gb. So the limit probably does not exist anymore and moving mail and compacting will fix it without data loss if it occurs as recent issues have been about displaying mail after the 4Gb point, not storing it.
Use the Ctrl and Shift keys in conjunction with your mouse to make multiple selections.
click followed by Shift+ Click selects everything between the two clicks, including the items clicked.
Holding the Ctrl key while clicking allows you to select or deselect mail to either fine turn the list from shift clicking or to make one of your own.
Ctrl +A selects everything in the list from the current selection to the end.
One option is create an important folder and move your important stuff to it then ctrl +A the whole remaining inbox.

How can I display application offline page when OAS is offline?

I am using IIS with oracle_proxy.dll redirecting to my oracle application server. When I do maintenance on the application and stop the OAS service the end-user gets the HTTP 500 - Internal server error from Internet Explorer. I would prefer for them to see a custom page that displays that the application is offline for maintenance. I tested with IIS custom error pages but that is not where the 500 page is coming from. The page being displayed is the IE friendly HTTP error message. I can't see how a configuration on the Oracle application server would help because the service is offline. Is there anything I can do to explain to the users that this is a scheduled maintenance and display a more informative page? I understand the solution may involve stopping, changing a configuration file in IIS and restarting. If so how can I script that so it can be easily done and what is the easiest way to do it?
Thank you for your response in advance.
Trying to make oracle more friendly, Jon.

I just wanted to confirm, are you using Oracle HTTP Server?
Regards
Mehmood

How can I display date+time and not the point number in excell?

Hi everyone,
Could anybody tell me how I can save date + time to a file, so that I can display on a diagram(excel) : date+time in (ox) and data (oy)? :
My program sets in (ox) the point number and not the date+time....( although date and time are written correctly in the column...)
Any help would be great,
Thanks,
regards,
Marc

hi there,
excel uses 01.01.1900 00:00 as the time offset, LabVIEW uses 01.01.1904 02:00, so you can't display the correct datetime in excel when you write the time as a fractional number of seconds from LabVIEW. you must format the datetime in LabVIEW to a string and write that to the column. use the "Format Date/Time String" - function and for example "%d.%m.%Y %H:%M:%S%3u" as the format string (see the functions help for more examples). you also could format your data to a string using "Format Into String" - function and write the file as a 2D string array. the decimal point you have to use depends on your system and its settings, but you can specify the decimal point in the Format string like "%.;%f" (means fractional number with point as decimal point).
best regards
chris
Best regards
chris
CL(A)Dly bending G-Force with LabVIEW
famous last words: "oh my god, it is full of stars!"

How can I display a formula variable in the report?

Hi,
I have a requirement to display a formula variable value in the report. When the user runs a report this variable value should be called once and displayed below the report title or in a specified cell. Is it possible something like this could be done? if yes, can someone tell me how can I achieve this functionality. I appreciate your time and effort with points.
Thanks,
Rao.

Hi Bhanu,
In the query properties you can only see text variables and not the formula variables. If I define my number of working days as text variable and I can display in the report. However, I need to use this variable in some calculation in the report, so it has to be formula variable in order to use in calculations. I appreciate your input with points.
Thanks,
Rao.

How can I stop MS Outlook Mail in the outbox from being sent?

I attempted to mail an email with a large attachment file. One of the addresses was bad. When my Outlook is running, the Mac tries to send it and shows the progress. However, when I look in my Outbox the files are not there. It does show up in the Outbox progress section but I can not delete it when it is there.
Where do these files reside?
Is there a hidden Outbox??

"Neumannium" wrote in message
news:[email protected]..
> Hello all,
>
> I'm creating VI that will gather data from a series of thermocouples
> and outputing that data to a graph as well as to a spreadsheet file.
>
> The sampling rate for each channel needs to be independent and
> variable. That is, they want to increase the sampling rate to 1/sec
> during temperature transitions, and then 1/10minutes (for example)
> when saturated.
>
> I was going to use a menu ring for the user to select the sampling
> rate (1 second to 15 minutes, with 7 different rates in between) and
> then, using a case statement, select the value of how long the 'wait
> (ms)' should wait in each loop.
>
> This kind of works with one maj
or problem. If the user currently has
> the sampling rate set to 15 minutes, then wants to switch it to 1
> second, it can take up to 14:59 for the 'wait(ms)' to finish waiting
> on the 15 minute wait before it switches to the faster sampling rate.
>
> Is there a way to stop a 'wait(ms)' in the middle of its wait cycle?
> Or is there a better way of doing this?
Instead of using the wait ms.vi you could use 'tick count' at the beginning
of the loop and then have an inner loop that keeps checking the 'tick count'
until time minus time > time to wait.
You will need to figure out how to handle the case where the millisecond
timer wraps from 2^32-1 to zero. That should not be too difficult.

How can i log onto my ipad when the screen says ipad is disabled log onto itunes. i logged on to itunes but nothing is recognized

Hi,
I had forgotten my password and made many attempts to log on to my Ipad. Finally after remembering the password it was to late to enter it. My screen says "Ipad is disabled, log on to ITunes. I logged onto ITunes and nothing is recognized an I cant find a category for correcting the problem. Any help will be greatly appreciated. Thanks

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

How can I open links from mail in the background?

I receive a lot of digest emails with lots of links. I would like to be able to click all of the links in a given email, have Safari open those pages in the background, and then when I'm done selecting the links I can switch to Safari and read them all. It's a logical workflow for me: click all the links you want to read, THEN go read them.
But instead, every single time I click on a link it jumps to Safari, so I have to switch back to Mail, click on the next link (which again jumps to Safari), etc. NetNewsWire allows me to open all my links in the background so I can avoid all this switching back and forth--can Mail do the same thing?
Thanks in advance for any help ...
--Bill

You should be able to Command-click on the link in Mail and have it open in the background.
Mulder

TS1292 how can i redeem a gift card when the response is non activated card

How can I find the problem with itunes giftcards when the response is card not activated?

Ask the people at the store the gift card came from or the iTunes Store staff for assistance.
(96009)

How can I make a JButton enabled when the user types smthg in a JTextField?

Hello,
I have a JButton and a JTextField on a frame. The JButton is disabled, myButton.setEnabled(false).
How can I enable the button when the user types something in the text field? Just typing, not pressing enter.
Thank you

There isn't one, actually. What you need is a DocumentListener and you have to associate it with the document object associated with the field i.e.
field2.getDocument().addDocumentListener() (new DocumentListener() {
});

How can I skip/pass a lesson when the pre-test is passed?

I'm creating a course with an overview and 3 lessons. Each is its own CP file (Captivate 6).
This course will be hosted in our LMS, where I will require each lesson to be taken/passed.
Lesson 1 is introductory/background material about my topic, and my users may or may not have had exposure to this information already. If they know the info, there's no need for them to take this lesson.
I have added a pre-test to the lesson, that, if failed, forces the user to go through the lesson content and a graded quiz at the end. The score is reported to the LMS and all is well.
If the user passes the pre-test, s/he is jumped to a congrats slide and instructed to exit the lesson. (No need to take the graded quiz - the questions are the same, and they've already "passed.")
My question: How do I report a PASS for the lesson if the user doesn't take the graded quiz? I don't need to report any particular score.
Thanks for any help you can offer!

Lieve, I'd LOVE to see your blog post about this topic - especially since you always include examples. =)
Request: I need help with reporting.
Here's my project's Branch View (click to view larger):
I've done as you suggested as far as I know. The navigation works perfectly, but when it comes to reporting, I'm not seeing what I expect/want.
What I want:
For the user to be able to skip the pre-test (the branching image shows this)If the user passes the pre-test, can exit the course with a Complete/Pass
For the user to have X number of chances at the test. After the user a) passes or b) uses up X chances and still fails, I want to report back to my LMS (I'm testing in scormcloud right now, but will be using HealthStream) both completion AND pass or fail.
What I've got:
The user CAN skip the pre-test (the branching works, anyway)
I can get Captivate to report Complete/Unknown or Complete/Pass (sometimes, even when the user fails the graded quiz), or Incomplete/Unknown.

How can I display an e-mail when the message is in HTML?

Similar Messages

Maybe you are looking for