How can i display digits in Chinese Format

Hi,
How can i display the digits in Chinese Format?
Suppose i have a number 15 as a value.
Now in Locale Chinese(Taiwan) it should display the digit as a combination of Chinese character for 10 + 5.
So could anyone please tell me what should i do for it?
Thanks,
Pinakin Ariwala

I think my question is not much clear so let me give you some more detail
There is a special characters available for a digits like 10,20 ,30 ,100 etc so when we want to represent the number 15 it should be displayed as a combination of chinese character for 10 and chinese character for 5.
similarly if we want to display 115 then it should 100+10+5 ..
so please anyone suggest me the way ito go?
Pinakin Ariwala

Similar Messages

How can I display & split the audio & video from the same digitized clip?

I digitized a scene into iMovie that I edited on a professional system which I don't have access to anymore. The whole scene is 1 clip. Now I see a few tweaks that I want to make, so I was hoping to do them in iMovie.
I want to "pull up" the audio in one section - meaning I want to take cut about 20 frames of audio from the end of a shot, and then move all the other audio up to fill the hole. To compensate for the missing 20 frames, I'll cut video off the head of the next shot. Some call this prelapping. Some call it an L-cut. Some call it asymmetrical trimming. Either way, I can't figure out how to do it in iMovie.
My clip appears in the timeline as one track - a single track that contains the video and 2 audio tracks. How can I display the audio that's tied to the video on its own track? Then I think I could split audio & video wherever I wanted and trim things up - but I can't figure out how to do it.
Am I asking too much of this software?
BTW, I never see the option to "Split audio clip at playhead". I'm not displaying clip volume or waveforms. Choosing to display waveforms doesn't show me anything. Maybe iMovie thinks I'd only want to see waveforms of audio that isn't tied to my video-and-audio clips?
Thanks in advance for any help...

Jordon,
"Am I asking too much of this software?"
No, you're not.
You first want to select your clip(s) and choose Advanced>Extract Audio.
This will copy the audio from the video clip and place it on one of the two separate audio tracks while lowering the audio level to zero in the original video track.
You can now edit and move the audio independently of the video.
With the audio clip selected, you'll find you now have access to Edit>Split Selected Audio Clip at Playhead.
Matt

How can I Display a Image with tiff format in Jpanel?

How can I Display a CMYK Image with tiff format in Jpanel ? Not in ScrollingImagePanel? Thank you in advance.

Why nobody can help me?I am very anxious!help me,please!

How can I display all my films in iTunes, on my iPhone 4S?

How can I display all my films in iTunes, on my iPhone 4S?
I have 10 films in iTunes and only 8 are displayed on my iPhone.
All 10 films are Digital Copies bought with Blu-ray Discs and have been added to iTunes.

Sync the other two the same way you synced the first 8.
Select them in iTunes and sync.

How can I display the data in table in separate column?

I have a vi reading data one by one in the same column.
How can I display the data with separate column?
like this:
data 1 | read | read
data 2 | read | read
data 3 | read | read
(would you mind if I will ask for an example
because it is much easier for me to work
with an example)
THANK YOU.

If you're reading your data in as a 1D array, this is as simple as using the Reshape Array to make a 2D array. I've attached an example in LabVIEW 6.1 format. The example rearranges a single column of data fill several columns horizontally, but you can easily modify this code to fill the columns downward instead.
Attachments:
Data_Column_Example.vi ‏18 KB

How can I display de last items of a region from other page in Portal?

I want to display de last five items (f.e.) included in a region (with attributes created) from other page. I've tried using custom search, but it also shows the attribute names, and I want show the attribute values (I don´t know how can I format these attributes).
Thanks a lot.

How can I display the last items of a region from other Oracle Portal page?

How can I display multiple numeric limit test in operator interface

I am using Teststand 3 and I want to display additional information like the limits and the results in the sequence UI control. Adding new columns to this control is no problem, so it works good with any step type, that has a single result. But how can I display the information of a step that has multiple results ? The rows of the sequence UI control are limited to a single line.
Regards
Dirk Schüller-Möller

Dirk,
If you want to display several results for a single step, then you will need to either create a new column for each result or have an expression in your column that will format in a single string all the result that you want to display.
What you can not do is spawn the result of a single step across several rows (only one step per row).
Best Regards,
Alejandro del Castillo
Ni

How can i display the Number instead of E

Hello Everyone ;
I am getting confused. How can i display the Number but the Exponential value is coming as E.
SQL> select sum(amount_sold) from sales;
SUM(AMOUNT_SOLD)
1.1287E+11
Table details ..
SQL> desc sales
Name                                          Null?        Type
AMOUNT_SOLD NUMBER
i want to change 1.1287E+11 to "numeric"
DB : 10.2.0.4
os : rhel 5.1

Just a minor correction on an obvious math/responding too fast error: 1.1287E+11 is a 12 digit number. You move the decimal 11 positions to the right which would add 7 zeroes to the value.
MPOWEL01> l
1 select length(to_char(1.1287E+11)), to_char(1.1287E+11,'999,999,999,999'), 1.1287E+11 "TEST"
2* from sys.dual
MPOWEL01> col TEST format 999999999999
MPOWEL01> /
LENGTH(TO_CHAR(1.1287E+11)) TO_CHAR(1.1287E+          TEST
                         12 112,870,000,000 112870000000the problem was that the OP failed to alias the sum result to the formatted column rather than the lenght of the data.
HTH -- Mark D Powell --

How can I display UTF-8 content in a struts portlet

How can I display UTF-8 (with English and Traditional Chinese mixed characters) content in a struts portlet?
Version used
Oracle Portal 10g Release 1 (9.0.4) on Linux
Portal language support: English only
Many thanks !!!

You can utilize multi-lingual support in your Struts portlets, as described in the Portal Developer's Guide.
Peter

How can I display my i pad 2 screen on a TV or through a projector?

How can I display my i pad 2 screen on a TV or through a projector?

Hello Jchningson,
This can be done with the 30-pin Digital AV Adapter.
Apple 30-pin Digital AV Adapter
http://store.apple.com/us/product/MD098ZM/A/apple-digital-av-adapter
Cheers,
Allen

Hello .. How can i Display my camera in iMac ?

Hello .. How can i Display my camera in iMac ?

Do you mean how to use the built in iSight camera, or how to hook up your external digital camera?

How can I display XSLT transformer errors on a web page ?

Hi,
I have some JSP pages that access DB, create an XML based on DB data and then transform it into HTML through an XSLT stylesheet. Developing the XSL code it's easy to make mistakes and generate errors on trasformation, but what I receive on the web page is only a "Could not compile stylesheet" TransformerConfigurationException, while the real cause of the error is displayed only on tomcat logs. This is the code for transformation:
static public void applyXSLT(Document docXML, InputStream isXSL, PrintWriter pw) throws TransformerException, Exception {
        // instantiate the TransformerFactory.
        TransformerFactory tFactory = TransformerFactory.newInstance();
        // creates an error listener
        XslErrorListener xel = new XslErrorListener();
        // sets the error listener for the factory
        tFactory.setErrorListener(xel);
        // generate the transformer
        Transformer transformer = tFactory.newTransformer(new SAXSource(new InputSource(isXSL)));
        // transforms the XML Source and sends the output to the HTTP response
        transformer.transform(new DOMSource(docXML), new StreamResult(pw));
}If an exception is thrown during the execution of this code, its error message is displayed on the web page.
This is the listener class:
public class XslErrorListener implements ErrorListener {
    public XslErrorListener() {
    public void warning(TransformerException ex) {
        // logs on error log
        System.err.println("\n\nWarning on XEL: " + ex.getMessage());
    public void error(TransformerException ex) throws TransformerException {
        // logs on error log
        System.err.println("\n\nError on XEL: " + ex.getMessage());
        // and throws it
        throw ex;
    public void fatalError(TransformerException ex) throws TransformerException {
        // logs on error log
        System.err.println("\n\nFatal Error on XEL: " + ex.getMessage());
        // and throws it
        throw ex;
}When I have an error in the XSL stylesheet (for examples a missing closing tag), I can find on tomcat logs the real cause of the error:
[Fatal Error] :59:10: The element type "table" must be terminated by the matching end-tag "</table>".
Error on XEL: The element type "table" must be terminated by the matching end-tag "</table>".but on my web page is reported just the TransformerConfigurationException message that is:
"Could not compile stylesheet".
How can I display the real cause of the error directly on the web page?
Thanks,
Andrea

This code is part of a bigger project that let developers edit XSL stylesheets through a file upload on the system and we can't impose the use of any tool for checking the xsl. So, I need to display the transformer error on the web page.I see. This code is part of an editorial/developmental tool for developers to create and edit XSL stylesheets.
As part of the editorial process, XSL errors during editing can be considered a normal condition. In other words, it is normal to expect that the developers will generate XSL errors as they are developing stylesheets.
In this light, handling the XSL transformation errors is a business requirement that you need to handle. Using the Java Exceptions mechanisms, e.g. try / catch are inappropriate to handle business requirements, in my opinion.
I suggest that you look at how you handle the occurence of XSL errors differently than what you currently have. You need to:
(1) capture the Transformation exception on the server;
(2) extract the message from the exception and put it into a message that can be easily understood by the user;
The current error message that you have going to the web browser is not useful.
And you should not have the Transformation exception sent to the web browser either.
What you are attempting to do with the exception is not appropriate.
Handle the Transformation exception on the Business tier and use it to create a useful message that is then sent to the Presentation tier. In other words, do not send Java exceptions to web browser.
/>

How can I display True/False in my dropdownlist as "Yes" and "No"?

Hi All,
I want to bind a dropdownlist to a boolean value (so it's either true or false). I'm particularly interested in using two-way binding to when the user changes from "yes" to "no" the boolean value automatically changes from "true" to "false." But, I want the user to see "yes" and "no" as the options, rather than "true" and "false".
How can I display "yes" and "no" and still take advantage of binding? Or can I not use binding in this circumstance?
-Josh

Solution 1:
In order to display Yes/No for True/False, you may specify labelFunction for the dropdownList.
In MXML:
<s:DropDownList labelFunction="myLabelFunction" />
In actionscript:
private var arr:ArrayCollection = new ArrayCollection(["true","false"]);
            private function mylabelFunction(item:Object):String
                if(item.toString() == "true")
                    return "yes";
                else return "No";
OR
Solution2:
may be u can try making an array collection like
private var arr:ArrayCollection = new ArrayCollection([{label:"yes",value:"true"},{label:"no",value:"false"}]);
and specify labelField for the dropdownList like
<s:DropDownList labelField="label" dataProvider="{arr}" />

How can I display contacts in a relationship

I have companies in my CRM. I have a customers/contacts in the CRM I have tied as a relationship with each companies. How can I display all the records/contacts associated with a company? I have a already created a secure zone, so the company user would have logged in. Is this possible? If not, any workaround?
The only workaround I thought of is to use webapp to import the company data and create another web app containing the employees data. Then link both tables/webapp using datasource. But the way the client's data is structured could create a lot of problems going forward.
Any suggestion, help will be appreciated

The relationship feature and how companies work currently in BC is really limited. It is an association and not true relationships at the moment. You cant output a company and show all its relationships at the moment.

How can i display a list of all the names stored in the Mail app?

When sending an email, the program shows a list of names according to the first and subsequent letters that I type into the To: field. There are times I cannot recall someone's email user name. How can I display a complete list of all the names Mail has stored? I know that I can go to the To: field then type in the letter A, then write down all listings under A, and then repeat for each letter of the alphabet, but there should be an easier method.
I have perhaps dozens of names in Mail, but only five names in Address Book, so the latter does me no good.

On the menubar, Mail > Window > Previous Recipients
Regards,
Captfred

How can i display digits in Chinese Format

Similar Messages

Maybe you are looking for