How can i display opening qtd balances in fsg

hi @ll
In oralce R12 how can i display specific account opening qtd balances in fsg in one row ? plz if any 1 know tell me as soon as possible

No, you can't. Only hours and minutes.

Similar Messages

How can I display the front panel of the dinamically loaded VI on the cliente computer, the VI dinamically loaded contains files, I want to see the files that the server machine has, in the client machine

I can successfully view and control a VI remotly. However, the remote VI dinamically loads another VI, this VI loaded dinamically is a VI that allows open others VIs, I want to see the files that contains the server machine, in the client machine, but the front panel of the dinamic VI appears only on the server and not on the client, How can I display the fron panel with the files of the server machine of the dinamically loaded VI on the client computer?
Attachments:
micliente.llb ‏183 KB
miservidor.llb ‏186 KB
rdsubvis.llb ‏214 KB

I down loaded your files but could use some instructions on what needs run.
It seems that you are so close yet so far. You need to get the data on the server machine over to the client. I generally do this by doing a call by reference (on the client machine) of a VI that is served by the server. THe VI that executes on the server should pass the data you want to diplay via one of its output terminals. You can simply wire from this terminal (back on the client again) to an indicator of your choosing.
Now theorectically, I do not think that there is anything that prevents use from getting the control refnum of the actual indicator (on the server) of the indicator that has the data, and read its "Value" using a property node. I have never tried this idea but it seems t
hat all of the parts are there. You will need to know the name of the VI that holds the data as well as the indicator's name. You will also have to serve all VI's. This is not a good idea.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

How can I display the name of my refnum on the front panel?

I am writing data to a file. To do this, I am using "Open/Create/Replace File" to prompt the user for a filename, which is then output to my VI as a refnum. I then write strings to this file with "Write to Text File".
How can I display this filename (with the path) on the front panel after the user has input it?
Michael
Solved!
Go to Solution.
Attachments:
refnum.JPG ‏45 KB

Use the Refnum to Path function, in File I/O -> Advanced File Functions palette. You can wire this to a path indicator.

How can I remove 'Open all in tabs' from my bookmarks?

How can I remove 'Open all in tabs' from my bookmarks? It's very annoying when you click on it by error. I downgraded from 29 to 28 because of the various bookmark issues I was having. I never had this issue with previous version of FF, why did they have to mess with stuff that was working.
I love the new layout. Thanks

Firefox 28 contains security vulnerabilities. It's best to start a new thread (ask a new question) about the other issues you're having with Firefox 29 and resolve them.
* https://www.mozilla.org/security/known-vulnerabilities/firefox.html
# Install Stylish and restart Firefox when prompted.
#* https://addons.mozilla.org/firefox/addon/stylish/
# Open the Add-ons Manager (Ctrl+Shift+A).
# Click User Styles on the left.
# Click the Write New Style button at the top. Paste the following in the text box, give the style a name, then click the Save button.
<pre><nowiki>
@namespace url(http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul);
#BMB_bookmarksPopup .openintabs-menuitem,
#bookmarksMenuPopup .openintabs-menuitem {
display: none !important;
</nowiki></pre>
If you don't want to install an add-on, you can use the ''userChrome.css'' file instead, but I don't recommend it.
* http://kb.mozillazine.org/UserChrome.css

How can I display the rows into columns.

How can I display the rows into columns. I mean
Create table STYLE_M
(Master varchar2(10), child varchar2(10));
Insert itno style_m
('MASTER1','CHILD1');
Insert itno style_m
('MASTER2','CHILD1');
Insert itno style_m
('MASTER2','CHILD2');
Insert itno style_m
('MASTER3','CHILD1');
Insert itno style_m
('MASTER3','CHILD2');
Insert itno style_m
('MASTER3','CHILD3');
Note : The Master may have any number of childs.
I want to display like this..
Master child1, child2, child3, .......(dynamic)
MASTER1 CHILD1
MASTER2 CHILD1 CHILD2
MASTER3 CHILD1 CHILD2 CHILD3
Sorry for disturbing you. Please hlp me out if you have any slution.
Thanks alot.
Ram Dontineni

Here's a straight SQL "non-dynamic" approach.
This would be used if you knew the amount of children.
SELECT
     master,
     MAX(DECODE(r, 1, child, NULL)) || ' ' || MAX(DECODE(r, 2, child, NULL)) || ' ' || MAX(DECODE(r, 3, child, NULL)) children
FROM
     SELECT
          master,
          child,
          ROW_NUMBER() OVER(PARTITION BY master ORDER BY child) r
     FROM
          style_m
GROUP BY
     master
MASTER     CHILDREN
MASTER1    CHILD1
MASTER2    CHILD1 CHILD2
MASTER3    CHILD1 CHILD2 CHILD3             Since you said that the number of children can vary, I incorporated the same logic into a dynamic query.
SET AUTOPRINT ON
VAR x REFCURSOR
DECLARE
        v_sql           VARCHAR2(1000) := 'SELECT master, ';
        v_group_by      VARCHAR2(200) := 'FROM (SELECT master, child, ROW_NUMBER() OVER(PARTITION BY master ORDER BY child) r FROM style_m) GROUP BY master';
        v_count         PLS_INTEGER;
BEGIN
        SELECT
                MAX(COUNT(*))
        INTO    v_count
        FROM
                style_m
        GROUP BY
                master;
        FOR i IN 1..v_count
        LOOP
                v_sql := v_sql || 'MAX(DECODE(r, ' || i || ', child, NULL))' || ' || '' '' || ';
        END LOOP;
                v_sql := RTRIM(v_sql, ' || '' '' ||') ||' children ' || v_group_by;
                OPEN :x FOR v_sql;
END;
PL/SQL procedure successfully completed.
MASTER     CHILDREN
MASTER1    CHILD1
MASTER2    CHILD1 CHILD2
MASTER3    CHILD1 CHILD2 CHILD3I'll point your other thread to this one.

How can I display XSLT transformer errors on a web page ?

Hi,
I have some JSP pages that access DB, create an XML based on DB data and then transform it into HTML through an XSLT stylesheet. Developing the XSL code it's easy to make mistakes and generate errors on trasformation, but what I receive on the web page is only a "Could not compile stylesheet" TransformerConfigurationException, while the real cause of the error is displayed only on tomcat logs. This is the code for transformation:
static public void applyXSLT(Document docXML, InputStream isXSL, PrintWriter pw) throws TransformerException, Exception {
        // instantiate the TransformerFactory.
        TransformerFactory tFactory = TransformerFactory.newInstance();
        // creates an error listener
        XslErrorListener xel = new XslErrorListener();
        // sets the error listener for the factory
        tFactory.setErrorListener(xel);
        // generate the transformer
        Transformer transformer = tFactory.newTransformer(new SAXSource(new InputSource(isXSL)));
        // transforms the XML Source and sends the output to the HTTP response
        transformer.transform(new DOMSource(docXML), new StreamResult(pw));
}If an exception is thrown during the execution of this code, its error message is displayed on the web page.
This is the listener class:
public class XslErrorListener implements ErrorListener {
    public XslErrorListener() {
    public void warning(TransformerException ex) {
        // logs on error log
        System.err.println("\n\nWarning on XEL: " + ex.getMessage());
    public void error(TransformerException ex) throws TransformerException {
        // logs on error log
        System.err.println("\n\nError on XEL: " + ex.getMessage());
        // and throws it
        throw ex;
    public void fatalError(TransformerException ex) throws TransformerException {
        // logs on error log
        System.err.println("\n\nFatal Error on XEL: " + ex.getMessage());
        // and throws it
        throw ex;
}When I have an error in the XSL stylesheet (for examples a missing closing tag), I can find on tomcat logs the real cause of the error:
[Fatal Error] :59:10: The element type "table" must be terminated by the matching end-tag "</table>".
Error on XEL: The element type "table" must be terminated by the matching end-tag "</table>".but on my web page is reported just the TransformerConfigurationException message that is:
"Could not compile stylesheet".
How can I display the real cause of the error directly on the web page?
Thanks,
Andrea

This code is part of a bigger project that let developers edit XSL stylesheets through a file upload on the system and we can't impose the use of any tool for checking the xsl. So, I need to display the transformer error on the web page.I see. This code is part of an editorial/developmental tool for developers to create and edit XSL stylesheets.
As part of the editorial process, XSL errors during editing can be considered a normal condition. In other words, it is normal to expect that the developers will generate XSL errors as they are developing stylesheets.
In this light, handling the XSL transformation errors is a business requirement that you need to handle. Using the Java Exceptions mechanisms, e.g. try / catch are inappropriate to handle business requirements, in my opinion.
I suggest that you look at how you handle the occurence of XSL errors differently than what you currently have. You need to:
(1) capture the Transformation exception on the server;
(2) extract the message from the exception and put it into a message that can be easily understood by the user;
The current error message that you have going to the web browser is not useful.
And you should not have the Transformation exception sent to the web browser either.
What you are attempting to do with the exception is not appropriate.
Handle the Transformation exception on the Business tier and use it to create a useful message that is then sent to the Presentation tier. In other words, do not send Java exceptions to web browser.
/>

How can I display True/False in my dropdownlist as "Yes" and "No"?

Hi All,
I want to bind a dropdownlist to a boolean value (so it's either true or false). I'm particularly interested in using two-way binding to when the user changes from "yes" to "no" the boolean value automatically changes from "true" to "false." But, I want the user to see "yes" and "no" as the options, rather than "true" and "false".
How can I display "yes" and "no" and still take advantage of binding? Or can I not use binding in this circumstance?
-Josh

Solution 1:
In order to display Yes/No for True/False, you may specify labelFunction for the dropdownList.
In MXML:
<s:DropDownList labelFunction="myLabelFunction" />
In actionscript:
private var arr:ArrayCollection = new ArrayCollection(["true","false"]);
            private function mylabelFunction(item:Object):String
                if(item.toString() == "true")
                    return "yes";
                else return "No";
OR
Solution2:
may be u can try making an array collection like
private var arr:ArrayCollection = new ArrayCollection([{label:"yes",value:"true"},{label:"no",value:"false"}]);
and specify labelField for the dropdownList like
<s:DropDownList labelField="label" dataProvider="{arr}" />

How can I display contacts in a relationship

I have companies in my CRM. I have a customers/contacts in the CRM I have tied as a relationship with each companies. How can I display all the records/contacts associated with a company? I have a already created a secure zone, so the company user would have logged in. Is this possible? If not, any workaround?
The only workaround I thought of is to use webapp to import the company data and create another web app containing the employees data. Then link both tables/webapp using datasource. But the way the client's data is structured could create a lot of problems going forward.
Any suggestion, help will be appreciated

The relationship feature and how companies work currently in BC is really limited. It is an association and not true relationships at the moment. You cant output a company and show all its relationships at the moment.

How can I display & split the audio & video from the same digitized clip?

I digitized a scene into iMovie that I edited on a professional system which I don't have access to anymore. The whole scene is 1 clip. Now I see a few tweaks that I want to make, so I was hoping to do them in iMovie.
I want to "pull up" the audio in one section - meaning I want to take cut about 20 frames of audio from the end of a shot, and then move all the other audio up to fill the hole. To compensate for the missing 20 frames, I'll cut video off the head of the next shot. Some call this prelapping. Some call it an L-cut. Some call it asymmetrical trimming. Either way, I can't figure out how to do it in iMovie.
My clip appears in the timeline as one track - a single track that contains the video and 2 audio tracks. How can I display the audio that's tied to the video on its own track? Then I think I could split audio & video wherever I wanted and trim things up - but I can't figure out how to do it.
Am I asking too much of this software?
BTW, I never see the option to "Split audio clip at playhead". I'm not displaying clip volume or waveforms. Choosing to display waveforms doesn't show me anything. Maybe iMovie thinks I'd only want to see waveforms of audio that isn't tied to my video-and-audio clips?
Thanks in advance for any help...

Jordon,
"Am I asking too much of this software?"
No, you're not.
You first want to select your clip(s) and choose Advanced>Extract Audio.
This will copy the audio from the video clip and place it on one of the two separate audio tracks while lowering the audio level to zero in the original video track.
You can now edit and move the audio independently of the video.
With the audio clip selected, you'll find you now have access to Edit>Split Selected Audio Clip at Playhead.
Matt

How can i display a list of all the names stored in the Mail app?

When sending an email, the program shows a list of names according to the first and subsequent letters that I type into the To: field. There are times I cannot recall someone's email user name. How can I display a complete list of all the names Mail has stored? I know that I can go to the To: field then type in the letter A, then write down all listings under A, and then repeat for each letter of the alphabet, but there should be an easier method.
I have perhaps dozens of names in Mail, but only five names in Address Book, so the latter does me no good.

On the menubar, Mail > Window > Previous Recipients
Regards,
Captfred

How can I rename open PDF files on my android tablet

How can I rename open files on android tablet

However, you can rename a file from document browser like this : http://forums.adobe.com/message/4753337

How can I display more than one value in Calendar ?

Hi,
the standard (example) script allows for the display of one value only (as I understood). How can I display two or three values, from the very same table ? Students of mine during an HTMLDB workshop in Leipzig did ask that question.
Do we have a more detailed docum. on the use of the calendar ?
pls kindly advise. TIA.
Bernhard

my solution:
Source fo the calendar starts:
snip>
declare
q varchar(32767) := null;
begin
q := 'select "ETA", <--- Date Field and concatination of fields as follows:
"SCHIFFSNAME"|| "ETA_TIME"|| "TERMINAL"||''(br*)'',
null,
null,
null,
null
from "#OWNER#"."SCHEDULE"'; . . . . . . .
snip>
comment on (br*) - you have to use "<" and ">" instead of "( " and ")" to have the "break/new line effect"
brgds
Bernhard

How can I display images that are not included in any collection?

How can I display images that are not included in any collection (some filter or smart collection)? A smart collection with parameters "Collection - contains - empty field" does not work. Lightroom 5.

Thank you! Good idea! I ordered letters of the alphabet (space separated), and it works.

How can i display all the query items to a table?

how can i display all the query items to a table in a jsp file?
i always have an out of memory error..

any body??any idea?
is it possible thru configuration or i have to write a program by the abaper??
Biswa

How can I display all of my bookmarks along the left side of my browser window like earlier versions of Firefox?

I like the bookmarks on the left side of the screen. I don't want to be navigating through a tree of all of my various bookmarks. How can I display all of my bookmarks along the left side of my browser window like earlier versions of Firefox?

View > Sidebar > Bookmarks (Ctrl+B)
Press F10 or tap the Alt key to bring up the "Menu Bar" temporarily if the Menu Bar is hidden.
*https://support.mozilla.com/kb/how-do-i-use-bookmarks

How can i display opening qtd balances in fsg

Similar Messages

Maybe you are looking for