How can I display the descriptor column from a view in my BR message

I have a table, Memberships, that contains a column for staff id. The staff data is on a remote database and I have created a view to access the required data. I have set the descriptor sequence for the name column of the staff view but the BR still displays the id.
I'm assuming that because staff is a view and has no capi of its own, the membership capi cannot call the staff capi function display_label.
I still would like to display the name of the staff member instaid of the ID. Can anyone suggest a workaround to force the display but without having to customize the membership capi after it has been created by headstart?

Hi,
try altering the code to create the capi.
I modified this code allready quite a lot to achieve my goals.
I also had that problem, and solved it by altering the code that generates the display_label. For each display_label funtion, I add a call to a package- function 'APPPA_LABEL.display_label' with parameters the tablename and the pk of the record. In the packagefunction, you can write your own definition of the display-label.
The Productivity Boosters look a bit difficult in the beginning, but when you get to know them, you can achieve some good results.
Greetings,
Kristof

Similar Messages

How can I display the HTML page from servlet which is called by an applet

How can I display the HTML page from servlet which is called by an
applet using the doPost method. If I print the response i can able to see the html document. How I can display it in the browser.
I am calling my struts action class from the applet. I want to show the response in the same browser.
Code samples will be appreciated.

hi
I got one way for this .
call a javascript in showDocument() to submit the form

How can I remove the Location column from the search results in a .chm file?

How can I remove the Location column from the search results in a .chm file?
I generated the file in Robohelp HTML 9.
As far as I know it's used when you've combined more than one source into the final help file. It is possible (though I don't remember doing it) that I did that once a couple of years ago but now I'm only using one source - the project that's generating the .chm.
Can anyone tell me how I can remove it?
Thanks
Tom

In Project Setup look at the Window properties. I think you will find Advanced Search is ticked.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

How can I edit the SamAccountName column from the list or be able to edit it?

Hello,
In my view for a SharePoint list, I see three columns for SamAccountName. This list is for listing staff as a directory, so there are phone numbers, names, emails addresses, division, department and such. The SamAccountName
column for some people has incorrect username or is blank. When I edit a record in the list, the SamAccountName column is not available to edit.
How can I edit the SamAccountName column from the list or be able to edit it?
I do have user profiles working and importing profiles from AD, but the list still shows empty or incorrect SamAccountName for some records.
Paul

If the user does not remember the encryption password there is no way to use the backup.
The password cannot be removed or reset.
Delete the backup, restore as new. Sync the desired content to the device.

How can i display the value fetched from my database back onto my combo box

i have saved a selected value from my combo box in my database.
i want to display the same value on my combo box to the user on a jsp page.
Can someone help me?

<%
String valueInYourDatabase="2";
String[] valuesToDisplay={"1","2","3"};
%>
<SELECT name="square_root_of_for">
<% for(int i=0;i<valuesToDisplay.lngth;i++){
String s=valuesToDisplay;
%>
<OPTION value="<%=s%>" <%=(s.equals(valueInYourDatabase)?"SELECTED":"")%> ><%=s%></OPTION>
<%}%>
</SELECT>
Something like this...
didn't compile it so their are surely errors ;)
regards
Alban

How can I display the rows into columns.

How can I display the rows into columns. I mean
Create table STYLE_M
(Master varchar2(10), child varchar2(10));
Insert itno style_m
('MASTER1','CHILD1');
Insert itno style_m
('MASTER2','CHILD1');
Insert itno style_m
('MASTER2','CHILD2');
Insert itno style_m
('MASTER3','CHILD1');
Insert itno style_m
('MASTER3','CHILD2');
Insert itno style_m
('MASTER3','CHILD3');
Note : The Master may have any number of childs.
I want to display like this..
Master child1, child2, child3, .......(dynamic)
MASTER1 CHILD1
MASTER2 CHILD1 CHILD2
MASTER3 CHILD1 CHILD2 CHILD3
Sorry for disturbing you. Please hlp me out if you have any slution.
Thanks alot.
Ram Dontineni

Here's a straight SQL "non-dynamic" approach.
This would be used if you knew the amount of children.
SELECT
     master,
     MAX(DECODE(r, 1, child, NULL)) || ' ' || MAX(DECODE(r, 2, child, NULL)) || ' ' || MAX(DECODE(r, 3, child, NULL)) children
FROM
     SELECT
          master,
          child,
          ROW_NUMBER() OVER(PARTITION BY master ORDER BY child) r
     FROM
          style_m
GROUP BY
     master
MASTER     CHILDREN
MASTER1    CHILD1
MASTER2    CHILD1 CHILD2
MASTER3    CHILD1 CHILD2 CHILD3             Since you said that the number of children can vary, I incorporated the same logic into a dynamic query.
SET AUTOPRINT ON
VAR x REFCURSOR
DECLARE
        v_sql           VARCHAR2(1000) := 'SELECT master, ';
        v_group_by      VARCHAR2(200) := 'FROM (SELECT master, child, ROW_NUMBER() OVER(PARTITION BY master ORDER BY child) r FROM style_m) GROUP BY master';
        v_count         PLS_INTEGER;
BEGIN
        SELECT
                MAX(COUNT(*))
        INTO    v_count
        FROM
                style_m
        GROUP BY
                master;
        FOR i IN 1..v_count
        LOOP
                v_sql := v_sql || 'MAX(DECODE(r, ' || i || ', child, NULL))' || ' || '' '' || ';
        END LOOP;
                v_sql := RTRIM(v_sql, ' || '' '' ||') ||' children ' || v_group_by;
                OPEN :x FOR v_sql;
END;
PL/SQL procedure successfully completed.
MASTER     CHILDREN
MASTER1    CHILD1
MASTER2    CHILD1 CHILD2
MASTER3    CHILD1 CHILD2 CHILD3I'll point your other thread to this one.

How can I browse the Adobe Market from my browser in stead of the tiny app display functionality?

How can I browse the Adobe Market from my browser in stead of the tiny app display functionality?

Hi,
Can you please go through the following past forum posting: http://forums.adobe.com/message/4620312
Hope that the info helps.
With regards,
Prabhu

How can I display the data in table in separate column?

I have a vi reading data one by one in the same column.
How can I display the data with separate column?
like this:
data 1 | read | read
data 2 | read | read
data 3 | read | read
(would you mind if I will ask for an example
because it is much easier for me to work
with an example)
THANK YOU.

If you're reading your data in as a 1D array, this is as simple as using the Reshape Array to make a 2D array. I've attached an example in LabVIEW 6.1 format. The example rearranges a single column of data fill several columns horizontally, but you can easily modify this code to fill the columns downward instead.
Attachments:
Data_Column_Example.vi ‏18 KB

Every time I start Firefox, the upgrade/signup page is displayed in one tabe while google, my start;up page s displayed in another. How can I stop the firefox page from loading every time?

Every time I start Firefox, the upgrade/signup page is displayed in one tab while google, my start-up page is displayed in another. How can I stop the firefox page from loading every time?

See these articles for some suggestions:
* https://support.mozilla.com/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
* https://support.mozilla.com/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols
* http://kb.mozillazine.org/Preferences_not_saved

How can i display the Number instead of E

Hello Everyone ;
I am getting confused. How can i display the Number but the Exponential value is coming as E.
SQL> select sum(amount_sold) from sales;
SUM(AMOUNT_SOLD)
1.1287E+11
Table details ..
SQL> desc sales
Name                                          Null?        Type
AMOUNT_SOLD NUMBER
i want to change 1.1287E+11 to "numeric"
DB : 10.2.0.4
os : rhel 5.1

Just a minor correction on an obvious math/responding too fast error: 1.1287E+11 is a 12 digit number. You move the decimal 11 positions to the right which would add 7 zeroes to the value.
MPOWEL01> l
1 select length(to_char(1.1287E+11)), to_char(1.1287E+11,'999,999,999,999'), 1.1287E+11 "TEST"
2* from sys.dual
MPOWEL01> col TEST format 999999999999
MPOWEL01> /
LENGTH(TO_CHAR(1.1287E+11)) TO_CHAR(1.1287E+          TEST
                         12 112,870,000,000 112870000000the problem was that the OP failed to alias the sum result to the formatted column rather than the lenght of the data.
HTH -- Mark D Powell --

How can i display the days of the month in my report, please help

dear all
my table name is day_close_table
it contains these columns:
product_code number,
the_date date,
sale_qty number,
buy_qty number
price number
i need to make report like the fiollowing
product : 10144 from: 1-jan-2006 to :10-jan-2006
days | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |
Sale | 50| 10| 20| 15|10|5 | 6 | 11|12|6 |
buy |10 | 20 | 10| 0 | 0 | 0 | 10| 1 | 1| 1|
i created two query and i decieded to join them
the first one is to display days in horizon direction
my query is:
SELECT TO_CHAR(THE_DATE,'DD-MONTH')D,
FROM HS_DAY_CLOSE;
my question is how can i display the records in horizone direction
please help

i solved this problem using this query
SELECT STOCK_CODE, COUNTRY_ID,
SUM(DECODE(to_char(the_date,'dd') ,'01', buy_qty)) "1",
SUM(DECODE(to_char(the_date,'dd') , '02', buy_qty)) "2",
SUM(DECODE(to_char(the_date,'dd') , '03', buy_qty)) "3",
SUM(DECODE(to_char(the_date,'dd') , '04', buy_qty)) "4",
SUM(DECODE(to_char(the_date,'dd') , '05', buy_qty)) "5",
SUM(DECODE(to_char(the_date,'dd') , '06', buy_qty)) "6",
SUM(DECODE(to_char(the_date,'dd') , '07', buy_qty)) "7",
SUM(DECODE(to_char(the_date,'dd') , '08', buy_qty)) "8",
SUM(DECODE(to_char(the_date,'dd') , '09', buy_qty)) "9",
SUM(DECODE(to_char(the_date,'dd') , '10', buy_qty)) "10",
SUM(DECODE(to_char(the_date,'dd') , '11', buy_qty)) "11",
SUM(DECODE(to_char(the_date,'dd') , '12', buy_qty)) "12",
SUM(DECODE(to_char(the_date,'dd') , '13', buy_qty)) "13",
SUM(DECODE(to_char(the_date,'dd') , '14', buy_qty)) "14",
SUM(DECODE(to_char(the_date,'dd') , '15', buy_qty)) "15",
SUM(DECODE(to_char(the_date,'dd') , '16', buy_qty)) "16",
SUM(DECODE(to_char(the_date,'dd') , '17', buy_qty)) "17",
SUM(DECODE(to_char(the_date,'dd') , '18', buy_qty)) "18",
SUM(DECODE(to_char(the_date,'dd') , '19', buy_qty)) "19",
SUM(DECODE(to_char(the_date,'dd') , '20', buy_qty)) "20",
SUM(DECODE(to_char(the_date,'dd') , '21', buy_qty)) "21",
SUM(DECODE(to_char(the_date,'dd') , '22', buy_qty)) "22",
SUM(DECODE(to_char(the_date,'dd') , '23', buy_qty)) "23",
SUM(DECODE(to_char(the_date,'dd') , '24', buy_qty)) "24",
SUM(DECODE(to_char(the_date,'dd') , '25', buy_qty)) "25",
SUM(DECODE(to_char(the_date,'dd') , '26', buy_qty)) "26",
SUM(DECODE(to_char(the_date,'dd') , '27', buy_qty)) "27",
SUM(DECODE(to_char(the_date,'dd') , '28', buy_qty)) "28",
SUM(DECODE(to_char(the_date,'dd') , '29', buy_qty)) "29",
SUM(DECODE(to_char(the_date,'dd') , '30', buy_qty)) "30",
SUM(DECODE(to_char(the_date,'dd') , '31', buy_qty)) "31"
FROM HS_DAY_CLOSE
GROUP BY STOCK_CODE,COUNTRY_ID

How can I display the front panel of the dinamically loaded VI on the cliente computer, the VI dinamically loaded contains files, I want to see the files that the server machine has, in the client machine

I can successfully view and control a VI remotly. However, the remote VI dinamically loads another VI, this VI loaded dinamically is a VI that allows open others VIs, I want to see the files that contains the server machine, in the client machine, but the front panel of the dinamic VI appears only on the server and not on the client, How can I display the fron panel with the files of the server machine of the dinamically loaded VI on the client computer?
Attachments:
micliente.llb ‏183 KB
miservidor.llb ‏186 KB
rdsubvis.llb ‏214 KB

I down loaded your files but could use some instructions on what needs run.
It seems that you are so close yet so far. You need to get the data on the server machine over to the client. I generally do this by doing a call by reference (on the client machine) of a VI that is served by the server. THe VI that executes on the server should pass the data you want to diplay via one of its output terminals. You can simply wire from this terminal (back on the client again) to an indicator of your choosing.
Now theorectically, I do not think that there is anything that prevents use from getting the control refnum of the actual indicator (on the server) of the indicator that has the data, and read its "Value" using a property node. I have never tried this idea but it seems t
hat all of the parts are there. You will need to know the name of the VI that holds the data as well as the indicator's name. You will also have to serve all VI's. This is not a good idea.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

How can i remove the phone number from the text messages that i receive in the notification center

how can i remove the phone number from the text messages that i receive in the notification center?

You choose whether to see text messages in Notification Center or not. If you elect to see them, they will display the phone number (unless they are from a contact in your contacts list).
You can choose not to see them at Settings > Notification Center > Messages.

How can I drop the key board from my calendar. The normal lower right key stopped working

How can I drop the key board from my calendar? The normal lower right key stopped working.

You can install this extension to make it easier to edit userChrome.css:
* ChromEdit Plus: http://webdesigns.ms11.net/chromeditp.html
The file needs to have this code:
<pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
#personal-bookmarks #bookmarks-menu-button { display:none !important; }</nowiki></pre>
You can reach the profile folder this way:
*Help > Troubleshooting Information > Profile Directory: Open Containing Folder
The file userChrome.css needs to be in the chrome folder in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so if the chrome folder is missing then you need to create a folder with the name chrome.

How can I change the shipping time from 1-2 weeks to 2 days

How can I change the shipping time from 1-2 weeks to 2 days. Thank you in advance.

Right you are, R_Kelly. Thanks, that did the trick. Ukgaurav also pointed out some choices in the Displays and Cursors Preferences with which I fine-tuned the tool cursor appearance.

How can I display the descriptor column from a view in my BR message

Similar Messages

Maybe you are looking for