How can I display ToDo notes?

Mac Mail ToDo's have a notes field, but I can only get them to display in one small field on one line only. Is there a way to display the whole note? Or is there a way to display one ToDo in its own window?

YoshAndStan wrote:
Mac Mail ToDo's have a notes field, but I can only get them to display in one small field on one line only. Is there a way to display the whole note? Or is there a way to display one ToDo in its own window?
not in Mail. you can do it in ical though.

Similar Messages

  • How can I display event notes on the relevant event in week/day view?

    Hi folks,
    I'm looking for a way to display the event notes on the actual event in week or day view.
    This will greatly help plan out my week (especially for repetitive events with custom notes for each occurrence).
    I can understand that Apple ommitted this feature to avoid clutter on short-duration events perhaps?
    Clicking on the event (or using the Inspector) to see the notes is not an option. I need an overview that can be viewed at a glance or even printed.
    Looking forward to your suggestions...
    Trev

    Hi Trev,
    With iCal as it is the only suggestion I have would be to add the full text to the title of the events.
    FYI, this is a user to user forum. By posting here you are not guaranteed someone from Apple will read it. If you'd like Apple to know about this I suggest you send them feedback.
    Best wishes
    John M

  • How can I display iPhone notes in mail 6.3?

    Hi everybody!
    I was used to receiving my iPhone notes on my older MacBook Pro running Mail 4.6 on Snow Leopard.
    But now I use a newer MacBook Air running Mountain Lion, and I don't find a way to display my iPhone notes in Mail 6.3.
    My iPhone Notes are set to display on my mail account, which they still do in the older MacBook Pro.
    Any help appreciated, thanks!

    There is now a separate Notes application. It is not part of Mail.

  • How can I display images that are not included in any collection?

    How can I display images that are not included in any collection (some filter or smart collection)? A smart collection with parameters "Collection - contains - empty field" does not work. Lightroom 5.

    Thank you! Good idea! I ordered letters of the alphabet (space separated), and it works.

  • How can I display XSLT transformer errors on a web page ?

    Hi,
    I have some JSP pages that access DB, create an XML based on DB data and then transform it into HTML through an XSLT stylesheet. Developing the XSL code it's easy to make mistakes and generate errors on trasformation, but what I receive on the web page is only a "Could not compile stylesheet" TransformerConfigurationException, while the real cause of the error is displayed only on tomcat logs. This is the code for transformation:
    static public void applyXSLT(Document docXML, InputStream isXSL, PrintWriter pw) throws TransformerException, Exception {
            // instantiate the TransformerFactory.
            TransformerFactory tFactory = TransformerFactory.newInstance();
            // creates an error listener
            XslErrorListener xel = new XslErrorListener();
            // sets the error listener for the factory
            tFactory.setErrorListener(xel);
            // generate the transformer
            Transformer transformer = tFactory.newTransformer(new SAXSource(new InputSource(isXSL)));
            // transforms the XML Source and sends the output to the HTTP response
            transformer.transform(new DOMSource(docXML), new StreamResult(pw));
    }If an exception is thrown during the execution of this code, its error message is displayed on the web page.
    This is the listener class:
    public class XslErrorListener implements ErrorListener {
        public XslErrorListener() {
        public void warning(TransformerException ex) {
            // logs on error log
            System.err.println("\n\nWarning on XEL: " + ex.getMessage());
        public void error(TransformerException ex) throws TransformerException {
            // logs on error log
            System.err.println("\n\nError on XEL: " + ex.getMessage());
            // and throws it
            throw ex;
        public void fatalError(TransformerException ex) throws TransformerException {
            // logs on error log
            System.err.println("\n\nFatal Error on XEL: " + ex.getMessage());
            // and throws it
            throw ex;
    }When I have an error in the XSL stylesheet (for examples a missing closing tag), I can find on tomcat logs the real cause of the error:
    [Fatal Error] :59:10: The element type "table" must be terminated by the matching end-tag "</table>".
    Error on XEL: The element type "table" must be terminated by the matching end-tag "</table>".but on my web page is reported just the TransformerConfigurationException message that is:
    "Could not compile stylesheet".
    How can I display the real cause of the error directly on the web page?
    Thanks,
    Andrea

    This code is part of a bigger project that let developers edit XSL stylesheets through a file upload on the system and we can't impose the use of any tool for checking the xsl. So, I need to display the transformer error on the web page.I see. This code is part of an editorial/developmental tool for developers to create and edit XSL stylesheets.
    As part of the editorial process, XSL errors during editing can be considered a normal condition. In other words, it is normal to expect that the developers will generate XSL errors as they are developing stylesheets.
    In this light, handling the XSL transformation errors is a business requirement that you need to handle. Using the Java Exceptions mechanisms, e.g. try / catch are inappropriate to handle business requirements, in my opinion.
    I suggest that you look at how you handle the occurence of XSL errors differently than what you currently have. You need to:
    (1) capture the Transformation exception on the server;
    (2) extract the message from the exception and put it into a message that can be easily understood by the user;
    The current error message that you have going to the web browser is not useful.
    And you should not have the Transformation exception sent to the web browser either.
    What you are attempting to do with the exception is not appropriate.
    Handle the Transformation exception on the Business tier and use it to create a useful message that is then sent to the Presentation tier. In other words, do not send Java exceptions to web browser.
    />

  • How can I display True/False in my dropdownlist as "Yes" and "No"?

    Hi All,
    I want to bind a dropdownlist to a boolean value (so it's either true or false).  I'm particularly interested in using two-way binding to when the user changes from "yes" to "no" the boolean value automatically changes from "true" to "false."  But, I want the user to see "yes" and "no" as the options, rather than "true" and "false".
    How can I display "yes" and "no" and still take advantage of binding?  Or can I not use binding in this circumstance?
      -Josh

    Solution 1:
    In order to display Yes/No for True/False, you may specify labelFunction for the dropdownList.
    In MXML:
    <s:DropDownList labelFunction="myLabelFunction" />
    In actionscript:
    private var arr:ArrayCollection = new ArrayCollection(["true","false"]);
                private function mylabelFunction(item:Object):String
                    if(item.toString() == "true")
                        return "yes";
                    else return "No";
    OR
    Solution2:
    may be u can try making an array collection like
    private var arr:ArrayCollection = new ArrayCollection([{label:"yes",value:"true"},{label:"no",value:"false"}]);
    and specify labelField for the dropdownList like
    <s:DropDownList labelField="label" dataProvider="{arr}" />

  • How can I display  contacts in a relationship

    I have companies in my CRM. I have a customers/contacts in the CRM I have tied as a relationship with each companies. How can I display all the records/contacts associated with a company? I have a already created a secure zone, so the company user would have logged in. Is this possible? If not, any workaround?
    The only workaround I thought of is to use webapp to import the company data and create another web app containing the employees data. Then link both tables/webapp using datasource. But the way the client's data is structured could create a lot of problems going forward.
    Any suggestion, help will be appreciated

    The relationship feature and how companies work currently in BC is really limited. It is an association and not true relationships at the moment. You cant output a company and show all its relationships at the moment.

  • How can I display & split the audio & video from the same digitized clip?

    I digitized a scene into iMovie that I edited on a professional system which I don't have access to anymore. The whole scene is 1 clip. Now I see a few tweaks that I want to make, so I was hoping to do them in iMovie.
    I want to "pull up" the audio in one section - meaning I want to take cut about 20 frames of audio from the end of a shot, and then move all the other audio up to fill the hole. To compensate for the missing 20 frames, I'll cut video off the head of the next shot. Some call this prelapping. Some call it an L-cut. Some call it asymmetrical trimming. Either way, I can't figure out how to do it in iMovie.
    My clip appears in the timeline as one track - a single track that contains the video and 2 audio tracks. How can I display the audio that's tied to the video on its own track? Then I think I could split audio & video wherever I wanted and trim things up - but I can't figure out how to do it.
    Am I asking too much of this software?
    BTW, I never see the option to "Split audio clip at playhead". I'm not displaying clip volume or waveforms. Choosing to display waveforms doesn't show me anything. Maybe iMovie thinks I'd only want to see waveforms of audio that isn't tied to my video-and-audio clips?
    Thanks in advance for any help...

    Jordon,
    "Am I asking too much of this software?"
    No, you're not.
    You first want to select your clip(s) and choose Advanced>Extract Audio.
    This will copy the audio from the video clip and place it on one of the two separate audio tracks while lowering the audio level to zero in the original video track.
    You can now edit and move the audio independently of the video.
    With the audio clip selected, you'll find you now have access to Edit>Split Selected Audio Clip at Playhead.
    Matt

  • How can i display a portlet in the Edit view only ?

    Dear All,
    I'm developing a portal in which the end user can change the content of the portal page (personalize) using Edit smart link and i ask How can i display a portlet in the Edit view only ? not shown in the production view ?

    Last time I heard with Oracle they said the only way is to look at the current URL. If it contais _mode=16 then we are in edit mode.
    This is a function I use:
    FUNCTION inEditMode return boolean is
    bEdit boolean := false;
    begin
    if PORTAL.wwpro_api_parameters.get_value('_mode', 'qaz') = '16' then
    bEdit := true;
    end if;
    return bEdit;
    end inEditMode;
    Kind regards
    Tomas Albinsson
    Stockholm, Sweden

  • How can I display the front panel of the dinamically loaded VI on the cliente computer, the VI dinamically loaded contains files, I want to see the files that the server machine has, in the client machine

    I can successfully view and control a VI remotly. However, the remote VI dinamically loads another VI, this VI loaded dinamically is a VI that allows open others VIs, I want to see the files that contains the server machine, in the client machine, but the front panel of the dinamic VI appears only on the server and not on the client, How can I display the fron panel with the files of the server machine of the dinamically loaded VI on the client computer?
    Attachments:
    micliente.llb ‏183 KB
    miservidor.llb ‏186 KB
    rdsubvis.llb ‏214 KB

    I down loaded your files but could use some instructions on what needs run.
    It seems that you are so close yet so far. You need to get the data on the server machine over to the client. I generally do this by doing a call by reference (on the client machine) of a VI that is served by the server. THe VI that executes on the server should pass the data you want to diplay via one of its output terminals. You can simply wire from this terminal (back on the client again) to an indicator of your choosing.
    Now theorectically, I do not think that there is anything that prevents use from getting the control refnum of the actual indicator (on the server) of the indicator that has the data, and read its "Value" using a property node. I have never tried this idea but it seems t
    hat all of the parts are there. You will need to know the name of the VI that holds the data as well as the indicator's name. You will also have to serve all VI's. This is not a good idea.
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • How can I display a changing variable in a subvi on the front panel of the main vi as the subvi is excuting

    In the document attached the vi on the right is sub to the vi on the left. On the subvi on the right the variable "Field Reading" is continuously updated on the front panel of the subvi as the "for" loop is executed, but only the last value of the variable is updated on the main vi front panel which is what is expected. My question is how can I display the changing value of "Field Reading" on the main vi front panel as the "for" loop in the subvi is running?
    Thank you.
    Solved!
    Go to Solution.
    Attachments:
    Doc2.docx ‏554 KB

    Hopefully I can explain it well enough. It really is simple.
    1) Create an empty global variable and call it something like User Interface References.vi
    2) For each and every control and indicator on your front panel, right-click and select Create/Reference
    3) Place these references wherever you like (I use a series of Event cases to perform my initialisation and these all live in one of these event cases). They can be placed anywhere in the main vi.
    4) For each of the references, right-click and select Create/Indicator
    5) Moving to the front panel, Cut all the indicators and Paste them in the global variable (eg. User Interface References.vi)
    6) Moving back to the block diagram, wire the global variable to each of the references and select the same named global variable.
    All the hard work is now done (until you add another user interface terminal). You should now have something that look as shown below, [except the reference labels would be to the left (not sure why the snippet put them above)]. In my latest program I have 82 references!
    Done. You can now access all your front panel controls and indicators anywhere in your program as shown below.
    You can just select Value in most cases, but in this particular case I wanted to fire off an Event to do some things (log the alarm) as well as just update the value. So, this is another bonus with the method.
    Hopefully this all makes sense. If not, let me know.

  • How can I display all content (graphics)

    On Skynet (United airlines employee website), when I try to look at the "seat selection" window, it displayes only numbers, it does not display a graphic of the cabin (seats). How can I display all content?

    You can see that it is a font issue by the appearance of the little boxes with the hex code of the characters that Firefox displays when there is no font that covers this Unicode range. You might see a different character in case you would have a font that maps this font.

  • How can I display all the columns on the screen without scrolling from side to side?

    My clinic software has many columns. How can I display all the columns without having to scroll from left to right all the time?

    If the software you are using doesn't offer the ability to increase or decrease document size, as many do, then the only way is to increase your screen resolution. If that's not possible, maybe you can decrease your font size?  If you can't do any of these, I think you're out of luck!

  • HT1338 how can i display my screen on my macbook pro to my 55" lg 3d smart tv? I tried Plex and it won't play it on my tv cause it is a tv show bought through iTunes.

    how can i display my screen on my macbook pro to my lg 55" 3d smart tv. I tried using plex as suggested by lg but because i purchased the tv show through itunes it will not pick up on plex. It says it can not r

    Either buy the $99 Apple TV or
    Connect the MBpro to the TV with a HDMI cable.

  • How can i display digits in Chinese Format

    Hi,
    How can i display the digits in Chinese Format?
    Suppose i have a number 15 as a value.
    Now in Locale Chinese(Taiwan) it should display the digit as a combination of Chinese character for 10 + 5.
    So could anyone please tell me what should i do for it?
    Thanks,
    Pinakin Ariwala

    I think my question is not much clear so let me give you some more detail
    There is a special characters available for a digits like 10,20 ,30 ,100 etc so when we want to represent the number 15 it should be displayed as a combination of chinese character for 10 and chinese character for 5.
    similarly if we want to display 115 then it should 100+10+5 ..
    so please anyone suggest me the way ito go?
    Pinakin Ariwala

Maybe you are looking for