How can I distinguish between iMessages and SMS messages in the iOS 7's "Messages" app?

I often chat with the same contact using both services, but I just have a duplicate contact thread in the "Messages" app, which I cannot distinguish unless I go into the thread itself and check to see whether the conversation is blue or green. Is there a way to distinguish between the two services? If so, how?
If not... Apple, get on it.

Excuse me great powerful one. I will certainly deal with it and I'll try to survive. Sorry if I have troubled you, great Sir. I am not worthy of your answers.
BTW: If you would have read the Q thoroughly you would not have posted an exact same answer.
"...unless I go into the thread itself and check to see whether the conversation is blue or green. Is there a way to distinguish between the two services?"
And I got your reply saying:
"Yes, by going into the thread itself and check to see whether the conversation is blue or green."
Wow, that was heplful.

Similar Messages

  • How can I distinguish between the first and the rest in Smartforms??

    I have made an Invoice in Smartform. I have to take three copies of that. In the first copy it will be printed "ORGINAL INVOICE" and in the next copies it will print "Duplicate copy".  How can I distinguish between the first and the rest in Smartforms??
    Regards,
    Subhasish

    >
    Subhasish Ganguly wrote:
    > I have made an Invoice in Smartform. I have to take three copies of that. In the first copy it will be printed "ORGINAL INVOICE" and in the next copies it will print "Duplicate copy".  How can I distinguish between the first and the rest in Smartforms??
    Hello Vamshi,
    As per the OP's requirement he has to print 3 copies of the invoice. Which according to my understanding should be printed at the same time ? May be i am wrong in interpreting this.
    You must be knowing you can control the print params of the SmartForms in CONTROL_PARAMETERS where you set the NO_DIALOG & in the OUTPUT_OPTIONS pass the number of copies.
    I think the solution you have proposed the "Original Copy" will be printed only once. (Correct me if i am wrong)
    Every time the user prints the invoice again he will be getting a "Duplicate Copy". If this is what the OP wants the logic is perfect
    Cheers,
    SUhas

  • How can I distinguish between a regular iPod and a iPod 4 s?

    How can I distinguish between a regular iPod and a iPod 4 s?

    Hi ARPantoja!
    I have an article here that can help you distinguish different iPod models:
    Identifying iPod models
    http://support.apple.com/kb/HT1353
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • How can i distinguish between set or tuples from incoming filters in a calculation

    How can i distinguish between set or tuples from incoming filters in a calculation. i am using descendants function with the leaves option to calculate some project revenue cause there is different calcuation method on sub projects the sum on the main project
    should reflect the sum of the sub project with all different methods.
    this works fine until i try to select 2 sub projects at the same time. i am getting the standard currentset dosnt work cause its a set.
    is there i way i can check if its a multiple select or not and handle it a different way

    Hi,
    Check the following link about Multi Select Calculations written by Mosha.
    http://sqlblog.com/blogs/mosha/archive/2007/01/13/multiselect-friendly-mdx-for-calculations-looking-at-current-coordinate.aspx
    Best regards...
    Chandima Lakmal Fonseka

  • I understand the difference between imessage and SMS but when I text a friend who always got iMessages in the past, everything I send her is SMS (green) even if we both have wifi. She has an iphone.

    I understand the difference between imessage and SMS but when I text a friend who used to receive imessages (blue), my phone shows I'm sending her SMS (green) messages. No longer are they blue. She has an iphone and this happens when we are both connected to wifi. We have both recently updated to ios7. Thanks!

    Turn off iMessage
    Reset Network Settings
    Turn iMessage back on

  • I have siemens plc s7-300 and labview how can i communiction between plc and s7-300

    Hi all good  morning
     iam new user for labview
    now iam working one new projects with labview and s7-300 automation plc  so how can i communication between plc and s7-300 using profibus or ethernet cables can any one help me with example
    thanks
    best regards
    vijaynagar.

    Dear vijaynagar,
    it would be posible to communicate with our Comsoft PROFIBUS products like DF PROFI II, FNL or cRIO PB.
    Please have a look at:
     - DF PROFII:  PCI, PCIe, C-PCI or PC104+ card with LabVIEW drivers: Link
     - FNL: Ethernet/PROFIBUS Gateway: Link
     - cRIO PB, C-Series module for National Instruments FPGA chassis: Link
    The DF PROFI II can be bought directly from Comsoft, the cRIO PB can be bought from National Instruments.
    Regards,
    Sven
    P.S. If you have any questions feel free to contact: [email protected]

  • How can I do to acquire and save date in the same time and in the same file when I run continual my VI without interrupti​on.

    I've attached a VI that I am using to acquire amplitude from Spectrum analyzerse. I tried to connect amplitude ouput to the VI Write Characters To File.vi and Write to Spreadsheet File.vi. Unfortunately when I run continual this VI without interruption, labview ask me many time to enter a new file name to save a new value.
    So, How can I do to aquire and save date in the same time and in the same file when I run continual my VI for example during 10 min.
    Thank you in advance.
    Regards,
    Attachments:
    HP8563E_Query_Amplitude.vi ‏37 KB

    Hi,
    Your VI does work perfectly. Unfortunately this not what I want to do. I've made error in my last comment. I am so sorry for this.
    So I explain to you again what I want to do exactly. I want to acquire amplitude along road by my vehicle. I want to use wheel signal coming from vehicle to measure distance along road. Then I acquire 1 amplitude each 60 inches from spectrum analyzer.
    I acquire from PC parallel port a coded wheel signal coming from vehicle (each period of the signal corresponds to 12 Inches). Figure attached shows the numeric signal coming from vehicle, and the corresponding values “120” and “88” that I can read from In Port vi.
    So I want to acquire 1 time amplitude from spectrum analyser each 5
    period of the signal that I am acquiring from parallel port.
    So fist I have to find how can I count the number of period from reading the values “120” and “88” that I am acquiring from In Port (I don’t know the way to count a number of period from reading values “120” and “88”).
    Here is a new algorithm.
    1) i=0 (counter: number of period)
    2) I read value from In Port
    3) If I acquire a period
    i= i+1 (another period)
    4) If i is multiple of 5 (If I read 5 period)
    acquire 1 time amplitude and write to the same
    file this amplitude and the corresponding distance
    Distance = 12*i). Remember each period of signal
    Corresponds to 12 Inches).i has to take these
    values: 5,10,15,20,25,35,40,45,50,55,60............
    5) Back to 2 if not stop.
    Thank you very much for helping me.
    Regards,
    Attachments:
    Acquire_Amplitude_00.vi ‏59 KB
    Figure_Algorithm.doc ‏26 KB

  • My iPad was stolen, how can I have it blocket and/or send to the iPad a message to get it back

    My iPad was stolen, how can I have it blocket and/or send to the iPad a message to get it back

    If you enabled Find My iPad on it before it was stolen, and if it is still turned on and connected to the internet with Find My iPad enabled, you can do this by going to icloud.com as explained here: http://help.apple.com/icloud/#/mmfc0f0165.

  • How can i use both Windows and Mac os at the same time on my iMac

    How can i use both Windows and Mac os at the same time on my iMac

    You can use Parallels desktop or VM Fusion to run both operating systems at the same time. Both programs work well, but I personally perfer VM Fusion.

  • I had an App on MacBook Air which would cause my computer to be locked. I delted it and reinstalled the App again from the AppStore. Now I am being charged again for the same App. How can I correct this issue and get refund for the double billing?

    I had an App on MacBook Air which would cause my computer to be locked. I delted it and reinstalled the App again from the AppStore. Now I am being charged again for the same App. How can I correct this issue and get refund for the double billing?

    You can't gift it, gifting can only be done from within the store, not from within your library.
    Puchases are considered final but you can try the 'report a problem' link to contact iTunes Support and see if they will refund or credit you : http://reportaproblem.apple.com
    If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • I know that I can back up my iMessages and SMS to iTunes and iCloud but I was wondering if it's possible to access them?  Can I view my messages on my computer for example?

    I was hoping to find an application that will back my iMessages and SMS directly to my e-mail so that I could view them on there.  Does anyone know if an app like this exists?  So far all I've been able to figure out is how to back everything up to iTunes and iCloud; however, I don't know how to actually see my messages on iTunes/iCloud.  Is that possible? 
    Thank you!

    You may want to investigate the following app (don't think it moves them to your email, but you can view them on your computer): http://www.wideanglesoftware.com/touchcopy/index.php

  • How can i disable 3G network and active 2G network in ios 8 same like ios 7.1.1

    how can i disable 3G network and active 2g network in i0s 8 as same like 7.1.1. cz there as a so much consumption in battary

    Same question since the only way to make calls where I am located is to disable 3G (the signal strength is much stronger without 3G)

  • HT1975 how can i find my lost iphone if i have the fi d my phone app but my location service is off

    how can i find my lost iphone if i have the finf my phone app but my location service is turned off

    - Go to icloud.com, sign in and go to FIndMyiPhone and send the iPhone a message of where you can be reached.
    Otherwise, the old fashioned way, like if you lost a wallet or purse
    - Change the passwords for all accounts used on the iPad and report to police
    - There is no way to prevent someone from restoring the iPad (it erases it) using it.
    - Apple will do nothing
    Reporting a lost or stolen Apple product                               
    - iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

  • How can we distinguish between post, parked and rejected invoice in SAP

    Hi Guys,
    Is there any way by which we can distinguish post, parked and rejected invoice. I mean to say any field gets updated after doing any of these activity...
    Help from you all will be highly appreciated...
    Thanks in advance,
    Vikash

    Hi,
    If BKPF-Bstat is space then its a normal document and if it is A then its clearing..
    A     Clearing Document
    B     Reset clearing document
    D     Recurring entry document
    M     Sample document
    S     Noted items
    V     Parked document
    W     Parked document with change of document ID
    Z     Parked document which was deleted
    I hope this helps.
    Regards
    Ravinagh Boni

  • How can I only send imessages and not texts on my iphone 4S

    I have turned OFF Send as SMS on the settings of my iphone. However the phone still allows me to send text messages using the message facility. I am aware that green equals text and blue equals imessage.
    I would however like to disable or at least have a reminder before sending a text in order that I do not get billed for sending photos attached to text instead of as imessages
    I thought that turning OFF Send as SMS in the settings field would prevent me sending texts and only allow imessages to go out, but this does not seem to be the case
    Regards
    Dave

    You can turn off sending pictures messages except as iMessages by going to Settings>Messages>MMS Messaging and setting it to "Off".

Maybe you are looking for

  • How to change the label of a link based on a condition in a report.

    Hi all, I have a report, in which i created a link. i want the the label of the link to change based on a column value. for eg. i created report based on emp table which has a link on empno . if the deptno of the employee is 10 i want the link to be

  • Need Help Fast! Big Problem with iRecruitment after Clone.

    I recently cloned my iRecruitment node (And all other nodes) to new windows server. All the other nodes work fine, no problems. However iRec does not work. Any help would be great!!!! These are the problem I am having. I can get to the iRecruitment "

  • Scroll Direction: Natural Problem

    On my macbook pro 13-inch mid 2010 I install Lion and from the beginning doesn't work the natural scroll with two fingers.I check system preferences in the box scroll direction natural. All others gestures works perfectly, only scroll direction doesn

  • Problem to see my purchase in differents authorized computers.

    I have 2 computer (A and B). Both have iTunes. When I buy a song in a computer A, I can't see that song in the computer B and vice versa. I can share the music, only if both computer are switch on and iTunes open. I would like see all my shopping lis

  • Connecting adobe AIR with Outlook

    Anyone knows if I'm able to connect (talk) with outlook from AIR??? Must I do a mini aplication or something inside outlook? My first idea was to develop a mini addon inside outlook to speak throught some kind of bridge, port, etc... Any suggestion?