How can i do a proper calculation of working hours?

I have tried doing a calculation of my working hours using the ABS formula but it still gives me the wrong answer.
5:00 PM
1:00 AM
16h
the formula is =ABS(A1-A2)
the resulte shoulb be 8h but it shows 16h....

giltober wrote:
Jerry,
I start working at 5pm and finish in 1am which means i worked for 8 hours.
the only way to get the correct answer is to enter the dates also?
is there a formula that i can enter that will take in consideration that every time i work i start at the afternoon and finish after midnight?
i have a cell that i enter the date..
im still new to numbers and i dont know i to put that into consideration...
thank you for your help
Gil.
That's right, my mistake on the detail. I must have been distracted. I stand by the rest of my post.
Here's my approach to solving the problem:
This will take care of the situation where you sometimes input both times on the same day even though they represent different days.
Jerry

Similar Messages

How can I install the proper App Store app to complete my upgrade?

I have Snow Leopard (10.6.8) installed on my iMac 27 (late 2010) but the app store app is not supported on this version. How can I get the proper app store app for SLP? My goal is to get back to Maverick.
I was running Maverick just fine but ran out of disk space. I had Best Buy install a Seagate 3TB drive. I reinstalled OS X 10.6.4 from my Install Disk. Then I upgraded the "software upgrades" to get 10.6.8. Somehow I upgraded the App Store app to a version that is not supported on my current version of 10.6.8.
I appear to be stuck. Unable to go to App Store to down load Maverick.
Also, with the new Seagate 3TB drive, the fan runs continuously. Any ideas how I can move forward?
Message was edited by: sunbuck7

sunbuck7 wrote:
I have an iMAC 27 Mid-2010
Regarding your fan issue I believe I am correct in assuming BBY did not install the correct HD. My suggestion is to first do several SMC resets which are designed to help with running fans, carefully read http://support.apple.com/kb/ht3964. for information on what a SMC reset addresses. You can find instructions for doing the SMC resets in https://discussions.apple.com/docs/DOC-3603. A SMC reset will ONLY help if the correct HD was installed though.
If the reset does not fix the issue then return the machine to BBY, inquire if the drive they use has heat sensors integrated into the HD they installed and if not then get them to install the correct HD to address the issue.

I have a friend who is not very savvy with computers. He works on a PC. (There may be versions for pc OS versions) I use a Mac-your website will not show the PC pages to me. How can I find the proper URL to embed in a button?

I have a friend who is not very savvy with computers. He works on a PC. (There may be versions for pc OS versions) I use a Mac-your website will not show the PC pages to me. How can I find the proper URL to embed in a button?

Try going to the following
Tools->Web Developer-> Page Source.
You can also access this by way of keyboard shortcut Ctrl + U
The View Page Source option is also available via the right-click menu by just right-clicking inside the page window & it will be the penultimate menu item.

HT4059 I've purchased a book, but there is no content inside the book. How can I get a proper version?

I've purchased a book, but there is no content inside the book. How can I get a proper version?

You should be able to delete the book via the Edit button at the top right of the bookshelf and then re-download via the Store button at the top left and then the Purchased tab. If it re-downloads in the state then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that book and use the 'Report a Problem' link.

My macbook pro no longer connects to my TV with the mini dvi to hdmi adapter. A while ago the computer fell down and hit the cable. How can I tell if the computer is working ok. Doesn't show mirroring any more.

My macbook pro no longer connects to my TV with the mini dvi to hdmi adapter. A while ago the computer fell down and hit the cable. How can I tell if the computer is working ok. Doesn't show mirroring any more. Was working while watching a movie but when I pulled it out from the computer and put it back in the system would no longer mirrorr the screen on the TV.

The best option is an appointment at an Apple store genius bar. The evaluation will be for FREE!
Ciao.

I have a macbook pro version 10.7.5 and my mailbox will not open at all and comes up with a quit message even though it is not open. how can i get into my account. it works on my iPhone an i have internet and all other functions working on my computer

I have a macbook pro version 10.7.5 and my mailbox will not open at all and comes up with a quit message even though it is not open. how can i get into my account. it works on my iPhone and i have internet and all other functions working on my computer

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents—the text, not a screenshot. I know the report is long. Please post all of it anyway.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

How can I get my web cam to work in Adobe Connect ?

This is actually an end user's question that I am having trouble answering to...
We use Adobe Connect to give online language classes, the end user is one of the students.
I cannot find the right Support answer to give him.
Problem:
My camera does not work when I connect to Adobe's rooms but camera works fine with other software.
Even though I suspected my old camera was working fine, yesterday I went ahead and bought a new camera.
I thought perhaps my webcam software may have been a problem, so I bought a different type camera with different software.
Even after removing all the old software, same result:
I surmised the problem might be caused by my firewall and security software, so once I tried changing the permissions for Adobe, and my Webcam, but that didn’t work.
Another time, I restarted my computer right before class and then turned off my firewall completely so there would be no interference but to no avail. I’m totally perplexed.
Isn’t there anyone else experiencing a similar problem?   Has anyone else found a solution?
I run Windows Vista with McAfee Internet Security Software. I always reboot the computer before class and open no other programs other than Google Chrome.
I now have a brand new Microsoft LifeCam Cinema Camera with LifeCam 3.5 Webcam Software.
I test my camera before going online. It always works fine.   Then I shut down the camera program and login into class.
When I “connect webcam” in the room, the light on my camera comes on (suggesting that it is ON), but only a black image is transmitted to the room.

Check to see if you have Google Voice installed. If so, remove it and see
if your problem vanishes. If not Google Voice, check to see if you have
any other communications software which interacts with your cam and
disable it. This was the problem I had with a similar problem on a Mac.
MosesJOI <[email protected]>
10/13/11 12:08 PM
Please respond to
[email protected]
To
jsb152 <[email protected]>
cc
Subject
How can I get my web cam to work in Adobe Connect ?
Re: How can I get my web cam to work in Adobe Connect ?
created by MosesJOI in General Discussion - View the full discussion
Thanks a lot Heyward for the swift reply !
I sent the advice out to the end user, but unfortunately this wasn't the
solution.
His reply is below :-
The default resolution of my new camera is already set at 640x360, but I
went ahead and tried several lower resolutions (e.g. 424x240; 320x240; and
160x120) but none worked in the room - camera still showed up as black
blank screen. Also, as far as I can tell, I don’t have the option of
adjusting the frame rate.
I started playing around with my Internet Security Settings to see if they
might be playing a role. So far, all to no avail.
Hmm...quite a tricky one - webcams always are - maybe if he can find a way
to adjust the frame rate (?).
He's going to fiddle about with the settings a bit more and see if
something does the trick.
If anyone has had a similar problem and found an ingenious solution,
please jot on a note on this thread.
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either
reply to this email or visit the message page: [
http://forums.adobe.com/message/3969561#3969561]
To unsubscribe from this thread, please visit the message page at [
http://forums.adobe.com/message/3969561#3969561]. In the Actions box on
the right, click the Stop Email Notifications link.
Start a new discussion in General Discussion by email or at Adobe Forums
For more information about maintaining your forum email notifications
please go to http://forums.adobe.com/message/2936746#2936746.

How can I get iCloud to accept my working Apple ID and password

My Apple ID and password works for iTunes and App Store. I'm trying to set up iCloud on my iPhone and iPad but i keep getting an error message that reads unsupported ID. Apple ID must be in the form of email address (@me.com). I don't have a MobileMe account. How can I get iCloud to accept my working Apple ID and password?

I've also reset my password to my Apple ID. I still get the Unsupported ID and password.

All of my purchased apps (games) and apps such as Weight Watchers, Facebook, WeatherBug, Sports and Pinterest, Notes, Nook, etc. are all locked up. They simply flash, then nothing! How can I fix this to make them work again.

First Issue: All of my purchased apps (games) and apps such as Weight Watchers, Facebook, WeatherBug, Sports and Pinterest, Notes, Nook, etc. are all locked up. They simply flash, then nothing! How can I fix this to make them work again? If I have to delete the purchased apps, will they still be in iTunes, or will I have to re-purchase them?
Second Issue: When I synced to my desktop (Windows XP) All my photos loaded onto my iPad2. I don't really want all 3000 + pics on my ipad!! How do I get them off? Next time I synced, they loaded again! Now I have so many duplicates! How do I get rid of the photos and prevent this from happening again?

If none of your third-party apps are working, but the Apple built-in ones are ok, then try downloading any free app from the store (as that appears to reset something) and then re-try them - the free app can then be deleted. In terms of re-downloading apps then you can do so as long as they are still available in the store, and you use the same iTunes account as you originally used to buy them, then you should be able to re-download them for free : http://support.apple.com/kb/HT2519
For synced photos, then with the iPad connected to and selected on the left-hand side of your computer's iTunes, then on the Photos tab on the right-hand side you can control which photos are synced to the iPad : http://support.apple.com/kb/HT4236 . If you don't want any photos to be synced then try selecting just an empty folder.

How can I get my excel spreadsheet to work in numbers

How can I get this budget sheet to work in numbers when it's from excel.

I couldn't get the picture of the whole thing it wouldn't load but you see where it say like 700.00 then below that it say 175.00 well that part works telling me what I need to know but when it get to where it says the 850 it stops working? it won't sum it out or something I'm not great with excel and this was sent to me by a first and it's our budget plan and I really need to be able to use it

How can I get my iPhone 5s to work in my 2015 outback

How can I get my iPhone 5s to work in my 2015 outback?

I Tried that and I can get calls out and in but no messaging.
AWindow opens and says this feature is not supported on this device
my iPhone 4 worked fine is it my iOS?

How can you get the apple tv to work in a hotel where to get on the wifi you have to still go to a website first and put in your room

How can you get the apple tv to work in a hotel where to get on the wifi you have to still go to a website first and put in your room?

Welcome to the Apple Community.
Unfortunately the Apple TV doesn't have a web browser so you can't do that.

How can I get an external microphone to work on an iphone?

How can I get an external microphone to work on an iphone?

Japib is correct.
WHAT happens? Exactly.
Also helpful would be to tell what event preceded this behavior - added App, update iOS, etc.
Quoted from  Apple's "How to write a good question"
To help other members answer your question, give as many details as you can.
Include your product name and specs such as processor speed, memory, and storage capacity. Please do not include your Serial Number, IMEI, MEID, or other personal information.
Provide the version numbers of your operating system and relevant applications, for example "iOS 6.0.3" or "iPhoto 9.1.2".
Describe the problem, and include any details about what seems to cause it.
List any troubleshooting steps you've already tried, or temporary fixes you've discovered.
ÇÇÇ

I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio

I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio 2013?

For MS Visio (any version) only the appropriate version of Acrobat *PRO* provides PDFMaker for Visio.
For Visio 2013 specifically you must have Acrobat XI Pro (updated to at least 11.0.1).
See:
http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
Be well...

How can I copy and paste the art work from album covers?

How can I copy and paste the art work from album covers?

I don't think the list style transfers. Copy and paste the text in to Mail, select it and then choose "Insert Numbered List" as a work around.

How can i do a proper calculation of working hours?

Similar Messages

Maybe you are looking for