How Can I do a System Reset for my Nokia 3120

Does anyone know how to do a system reset on a regular Nokia 3120?
Thanks!

Yes. Take it to a Nokia Care Point.
There is no way for the end-user to perform anything other than a "revert to factory default settings" on a S40 phone like the 3120.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Similar Messages

How can I create the recovery discs for my AIO computer? (For Windows 7 systems)

Q.: How can I create the recovery discs for my MSI laptop/AIO computer? (For Windows 7 systems)
A.:
1. Locate the "MSI BurnRecovery" shortcut on your desktop or start menu. Run this program. (Note: If UAC is enabled, press "Yes" to allow the program to run.
2. MSI BurnRecovery will prepare the files. This process may take a few minutes.
3. Click on "Next" to continue.
4. Click on "Advanced".
5. Click on "Create an ISO file for the recovery disc".
6. Select the destination where you want to create the ISO files. (Default is the D: drive)
7. The program will now create the ISO files. This process may take up to 20 minutes.
8. Click on "Finish". Make sure the box is unchecked.
9. Browse to the location of the ISO files. Double-click the recovery_dvd file. (Note: Depending on your system, you will have 1-3 recovery_dvd files)
10. Insert a blank DVD (If the AutoPlay window pops-up, close it). Click on "Burn". It is also recommended to check the box to verify disc after burning.
11. After burn is complete, click on "Close".
12. Double-click the recovery_dvd2 file.
13. Insert a blank DVD (If the AutoPlay window pops-up, close it). Click on "Burn". It is also recommended to check the box to verify disc after burning.
14. After burn is complete, click on "Close". Recovery disc creation is now complete. (You can also delete the ISO files, but it is recommended to keep them)

Hi,
You can order a replacement set of Recovery Discs using the link below.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00810334&cc=us&lc=en&dlc=en
If you have any problem with this link, order them directly from HP.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

I forgot my admin password for my Macbook Pro OS X version 10.9, how can i recover it and reset my password

I forgot my admin password for my Macbook Pro OS X version 10.9, how can i recover it and reset my password? Thank you!

OS X Lion>: How to Easily Reset the Administrator Password

I just updated my iPhoto and now am asked to download the iPhoto Library Upgrader. I am asked for a password. I do not know it. How can I find it or reset it?

Name: O

I just updated my iPhoto and now am asked to download the iPhoto Library Upgrader. I am asked for a password. I do not know it. How can I find it or reset it?
Are you asked for the password, when you run the installer for iPhoto Library upgrader?
Then the installer is asking you for the password of your administrator account. You need to authorize the installation.

Hi sir,Please how can i ask operation system for my MacBookPro 15 inch from Appel website ?

Hi sir,Please how can i ask operation system for my MacBookPro 15 inch from Appel website ?

Thank you for response , the question is : How can i download operation system from Apple website ?

How can i fully erase and reset my computer to get it ready for sale

how can i fully erase and reset my computer to get it ready for sale?

Please read and carefully follow these articles:
Prepare a Mac For Sale
Preparing your Mac for sale

How can you change your security question for I tunes?

How can you change your security question for I tunes?

If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then the steps half-way down this page give you a reset link on your account : http://support.apple.com/kb/HT5312
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 link above to add a rescue email address for potential future use

How can I activate the transfer rules for the ODS updating a data target.

We are on BW 3.5 and I'm loading data into the 0FIGL_O10 ODS and then uploading the data into the cube 0FIGL_C10. The data loads just fine to the ODS but when I try to 'update the data target' I get a date & time stamp' error on the info-package transfer rules.
I then Replicate the datasource 80FIGL_O01.
I must then 'activate' the transfer rules.
However I cannot get the transfer rules for 80FIGL_O10 in CHANGE MODE to activate them.
How can I activate the transfer rules for the ODS updating a data target.
The error text is as follows:
DataSource 80FIGL_O10 has to be replicated (time stamp, see long text)
Message no. R3016
Diagnosis
DataSource 80FIGL_O10 does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 02/15/2007 10:42:33.
The time stamp in the BW system is 11/07/2006 13:11:54.
System response
The load process has been terminated.
Procedure
Copy the DataSource again and then activate the transfer rules that belong to it. You have to activate the transfer rules in every case, even if they are still active after the DataSource has been copied.
Thanks for your assistance.
Denny

Hi Dennis,
Try, using Business Content to activate your data source
hope this will help you
How activate business content?
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm

I got the iphone 5, got some pics and msgs and contacts on it, and when i connected to my PC to restore my previous info from the old iphone, all the new stuff are gone, how can i get it back, thanks for help.

i got the iphone 5, got some pics and msgs and contacts on it, and when i connected to my PC to restore my previous info from the old iphone, all the new stuff are gone, how can i get it back, thanks for help.

The voicemail system used for the iPhone is different from the voicemail system used on the rest of the Verizon Wireless network. When you activate the iPhone, you lose your saved voicemails from the other system. When you activate a non-iphone, you lose any saved voicemails from the iPhone voicemail system too.

My Mac has a OS X operating system. (10.6.8) How can I upgrade its system to Mountain Lion so I can then add the ICloud?

My Mac has a OS X operating system. (10.6.8) How can I upgrade its system to Mountain Lion so I can then add the ICloud? Also, does the ICloud include virus protection for files already on my Mac?

You can purchase and download Mountain Lion in the App Store (in your 'Applications' folder), then just run the installer: however you should first check that Mountain Lion can indeed run on your Mac. Please see this page:
http://www.apple.com/osx/specs/
You might also want to look at this page to see whether any vital applications will be adversely affected:
http://roaringapps.com/apps:table
In particular note that PPC applications such as AppleWorks will not run on Mountain Lion since Rosetta is not included and can't be added.

HT4528 I have the 4s and i downloaded ios 8 but nowmy battery will drop from 100 to 0 in 30 mins without me using it. it has also happened to my sisters phone and our upgrade isnt until december. how can i get rid of ios8 for anyting else?

I have the 4s and i downloaded ios 8 but nowmy battery will drop from 100 to 0 in 30 mins without me using it. it has also happened to my sisters phone and our upgrade isnt until december. how can i get rid of ios8 for anyting else?

Downgrading the iOS is not supported. Basic troubleshooting steps are restart, reset, restore from backup, restore as new device

How can I activate drill down report for planned line items please urgent?

Hi Everyone,
Please suggest me how can i activate drill down report for planned line items in internal orders. S_ALR_87012993. Please suggest me, I'll award full points. I am unable to do it in client system, which has already line items. I tried in my sys with new config it is working.
Kind regards
Arvey.

Hi
It is based on the reports attached in the Report Group - TCODE: GR53
In the Report Group screen
Press CONFIGURE This is to attach any Drill Down reports.
Press the Insert Line icon
As is the screen may be used to insert a Report Writer report group. To add an ABAP, press other report type
Double click on ABAP Reports
Enter the name of the ABAP and ENTER
RCOPCA08 Profit Center: Plan Line Items
VVR

In Acrobat, I wrote a script to turn fields gray if a checkbox was checked. How can I get it to reset to white (or clear) when the reset form button is clicked?

In Acrobat, I wrote a script to turn fields gray if a checkbox was checked. How can I get it to reset to white (or clear) when the reset form button is clicked?

Thank you so much for your reply . . . but . . . I should have shared my original script with you -- it was a little more complicated than I led you to believer. I was triggering a group of text fields to become disabled as well as gray. Below is the original script so that when the checkbox is checked, it causes several "Co" fields to be disabled and gray.
// Mouse Up script for check box
// If checked, certain fields should be disabled
var f_prefix = "Co";
// Get a reference to all of the "Co" fields
var f = getField(f_prefix);
// Reset the Co fields
resetForm([f_prefix]);
if (event.target.value === "Off") {
    // Enable the Co fields
    f.readonly = false;
    f.fillColor = color.transparent;
} else {
    // Disable the Co fields
    f.readonly = true;
    f.fillColor = color.gray;
To recap -- my goal is to get those gray fields to revert to transparent if the form is reset. I'm willing to create my own custom "Reset Form" button but I'm not sure I understand how that would look. Wouldn't it be quite lengthy? I think I'm having a brain freeze -- can't figure it out!

How can i apply this java program for a jsp page?

import java.io.*;
import java.util.*;
public class FileProcessing
//create a vector container for the input variables
 Vector variables = new Vector();
//create a vector container for the constants
 Vector constants = new Vector();
/*create a string expression container for the equation
 as read from the file */
 String expression = " ";
//create double result container for the final result
 double result = 0;
 public boolean processFile(String filename,String delim)
 //index for values vector
 int num_values = 0;
 //index for constants vector
 int num_constants = 0;
 //current line being read from the external file.
 String curline = " ";
 //start reading from the external file
 try
 FileReader fr = new FileReader(filename);
 BufferedReader br = new BufferedReader(fr);
 while(true)
 curline = br.readLine();
 if(curline == null)
 break;
 //determine the type of current interaction
 boolean variable = curline.startsWith("input");
 boolean constant = curline.startsWith("constant");
 boolean equation = curline.startsWith("equation");
 boolean output = curline.startsWith("result");
 //on input variables
 if(variable)
 StringTokenizer st = new StringTokenizer(curline,delim);
 int num = st.countTokens();
 int count=0;
 while(st.hasMoreTokens())
 String temp = st.nextToken();
 if(count==1)
 byte b[]= new byte[100];
 System.out.println(temp);
 System.in.read(b);
 String inputval = (new String(b)).trim();
 variables.add(num_values,inputval);
 num_values++;
 count++;
 // on constant values
 if(constant)
 StringTokenizer st = new StringTokenizer(curline,delim);
 int num = st.countTokens();
 int count = 0;
 while(st.hasMoreTokens())
 String temp = st.nextToken();
 if(count==1)
 byte b[]= new byte[100];
 System.out.println(temp);
 System.in.read(b);
 String cons = (new String(b)).trim();
 constants.add(num_constants,cons);
 num_constants++;
 count++;
 // on equation
 if(equation)
 StringTokenizer st = new StringTokenizer(curline,delim);
 int num = st.countTokens();
 int count = 0;
 while(st.hasMoreTokens())
 String temp = st.nextToken();
 if(count==2)
 this.expression = temp;
 count++;
 // now we are ready to evaluate the expression
 if(output)
 org.nfunk.jep.JEP myparser= new org.nfunk.jep.JEP();
 myparser.setAllowAssignment(true);
 for(int i=1;i<variables.size()+1;i++)
 String name = "arg"+Integer.toString(i);
 myparser.addVariable(name,new Double(variables.get(i-1)
 .toString()).doubleValue());
 for(int i=1;i<constants.size()+1;i++)
 String name = "arg" +Integer.
 toString(i+variables.size());
 myparser.addConstant(name,new Double(constants.get(i-1).toString()));
 //output is obtained as follows
 myparser.parseExpression(expression);
 result = myparser.getValue();
 System.out.println("Assay value: "+result);
 catch(Exception e)
 System.out.println(e.toString());
 return true;
 public static void main(String[] args)
 FileProcessing fp = new FileProcessing();
 fp.processFile("input.eqn",":");
}//my text file name is: "input.eqn" (given below)
input:Enter Value1:arg1
input:Enter Value2:arg2
input:Enter Value3:arg3
constant:arg4
constant:arg5
Equation:arg1+arg2+arg3
result:

how can i apply this java program for a jsp pagewhy do you want to do this ?
Your program reads from a file on the disk and formats based on a patterm.
Jsp is not intended for such stuff.
ram.

How can I get a boot-disk for a Compaq P2500 laptop Windows XP Home Edition?

I'm already in another forum with a eerily similar question, but that's for the HP Media Center Pavilion m8000e desktop system (Windows Vista Home Premium) I was just given; I've ordered a new hard drive for that. I assume the directions to create a boot disk with the *.iso file (using Imgburn) is going to work; I have the 25-digit code for that.
This question here now is for my wife's older Compaq P2500 2596US laptop running Windows XP Home Edition. This too needs a new hard drive, but I also am missing the boot disc for this; I do have the 25-digit product code.
How can I get a boot disk for this laptop? I tried the Ubuntu method outlined in a few posts; geez, what a headache ... never could get it managed. Does HP not make any boot disks available? Microsoft told me to check with HP.
I can furnish the product code; model #; serial# ... gee, maybe the oroginal receipt is even laying around somewhere ...
I need a boot disk to get the new hard drive up on board (if I end up ordering that).
Thanks for any help!
Michael

Hi
Please find the link given below might be helpful for your.
http://www.computersurgeons.com/productdetails.aspx?ID=4219
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

How Can I do a System Reset for my Nokia 3120

Similar Messages

Maybe you are looking for