How Can I do an executable program in Labview?

I have Ver. 6.1 of Labview, Ver. 6.0 of IIMAQ Vision Builder and PCI1409, I have my aplication ready too. But I want ti create av executable aplication.
I wanto to Know If is necesary to have a special version of LabView or to have another software, and Where can I find an examples about it.
I will hope your answer.

To create an executable with LabVIEW 6.1 you need the application builder add-on. This comes with some versions of LabVIEW (e.g. Professional) and not others (e.g. Base or Full). To find out if it's included with yours go to the "Tools" menu on the front panel and look for the "Build Application or Shared Library (DLL)" option. If you don't have it you can probably purchase it seperately.
Also you need to have the LabVIEW 6.1 runtime engine installed on the target computer you intend to run the executable on.
Hope this helps,
Neil

Similar Messages

How can we call a C program in Labview

Hi
a) In one of our application we have to call a C progran in Labview. I am not able to call it. Can somebody help me.
b) When we call a C program ,is Labview makes block diagram for it.
Please reply
Thanking You

hi there
well, then we need more information what you mean with a "C program". are you talking about C source code, a command line executable, a high end executable with a GUI, a dll, ActiveX.... what are the parameters you have to pass? what parameters are returned from the "C program"? please post some code....
as a startup you could search the examples shipped with LV. open the example finder from the runtime menu.
Best regards
chris
CL(A)Dly bending G-Force with LabVIEW
famous last words: "oh my god, it is full of stars!"

How can I link between FORTRAN program and Labview

I try to use lapviwe to link betwwen different codes one of the them is FORTRAN *.for and the other is Neurosolution breadboards *.nsb but I don't know how so if you can help me I'll do appreciate that for you.

ahmedr40,
I would suggest building the FORTRAN code into a DLL as well as the breadboard code. You can then use the Call Library Function node to call the compiled code. This would be the easiest and fastest method. You could also compile these pieces of code and link them to some C/C++ code that you can write and then call this code from LabVIEW.
Randy Hoskin
Applications Engineer
National Instruments
http://www.ni.com/ask

How can you run an executable from AS2 code without using fscommand() or a projector?

Just using some short .asc files made out of Notepad for some back-end server stuff, but without using fscommand() or projectors, how can you call an executable? There's a C++ program that I want to run from more-or-less the same directory as the .asc files, which handles some logging, and I need to be able to pass it arguments when telling it to run.
Please note that I have Googled this with no useful results and that I'm on an assignment that necessitates this question. Also I'm open to the possibility that it can't be done.
Thanks!

The swf is on a different server and using AS3. The little bit of AS2 back-end stuff is on a few different servers that the swf is hooking up to for streaming video and audio. The executable would be on the AS2 servers.

How can i find the printing program?

hi
i have sap script how can i find the printing program ?
ami

ami bardogo wrote:
hi
what is the different between the commands 'break' and 'break-point'
thanks,
ami
h2 Breakpoints h2
Apart from being able to execute an ABAP program in the Debugger, you can also start the Debugger call by the choosing a breakpoint. This is achieved by setting one or more of these breakpoints in the program. A breakpoint is a signal at a particular point in the program that tells the ABAP runtime processor to interrupt processing and start the Debugger. The Debugger is activated when the program reaches this point.
There is also a special kind of breakpoint called a watchpoint. When you use watchpoints, the Debugger is not activated until the contents of a particular field change. For more information, refer to the chapter Watchpoints.
Breakpoint Variants
The Debugger contains different breakpoint variants:
Static
A user-specific breakpoint is inserted in the source code as an ABAP statement using the keyword BREAK-POINT. A non user-specific breakpoint is set in the ABAP Editor using the BREAK user name statement.
Directly set
dynamic breakpoints
Can be set in the ABAP Editor or the Debugger by double-clicking a line, for example. Dynamic breakpoints are always user-specific, and are deleted when you log off from the R/3 System.
Breakpoints
at statements
The Debugger stops the program immediately before the specified statement is executed.
Breakpoints
at subroutines
The Debugger stops the program immediately before the specified subroutine is called.
Breakpoints at function modules
The Debugger stops the program immediately before the specified function module is called.
Breakpoints at methods
The Debugger stops the program immediately before the specified method is called.
Breakpoints at exceptions and system exceptions
The Debugger stops the program immediately after a system exception, that is, after a runtime error has been intercepted.
Static Breakpoints
Static breakpoints are always user-independent if there is no specification of a user name. Once a user has inserted the statement BREAK-POINT or BREAK name in an ABAP program, the system always interrupts the program at that point for that user or only for the user name. This procedure is only useful in the development phase of an application when program execution is always to be interrupted at the same place. For more information, refer to the chapter Static Breakpoints.
In HTTP sessions, a static breakpoint is skipped if you did not set additional dynamic HTTP breakpoints in the editor of a BSP page. Instead, a corresponding system log entry is written, which can be checked using transaction SM21.
Dynamic Breakpoints
Dynamic breakpoints are user-specific. Therefore, you should use them if you only want the program to be interrupted when you run it yourself, not when it is being executed by other users. All dynamic breakpoints are deleted when you log off from the R/3 System.
Dynamic breakpoints are more flexible than static breakpoints because you can deactivate or delete them at runtime. They have the following advantages:
·        You do not have to change the program code.
·        You can set them even when the program is locked by another programmer.
·        You can define a counter that only activates the breakpoint after it has been reached.
Special dynamic breakpoints are useful when you want to interrupt a program directly before a particular ABAP statement, a subroutine, or an event, but do not know exactly where to find it in the source code. Event here is used to refer to the occurrence of a particular statement, for example, or calling up a method. Special dynamic breakpoints are user-specific. You can only set them in the Debugger. For more information, refer to the chapter Dynamic Breakpoints.
In HTTP sessions, the system stops both at static and dynamic breakpoints if a dynamic breakpoint was set in the editor of a BSP page before program execution.
Lifetime and Transfer of Breakpoints
A static breakpoint remains intact as long as the BREAK-POINT or BREAK-POINT name statement is not removed from the source code. Without saving, dynamic breakpoints only remain intact in the relevant internal session. However, they remain in effect during the entire user session if they are saved by choosing the menu path Breakpoints ® Save in the ABAP Debugger. For more details on the subject of user sessions and modes, refer to Modularization Techniques in the ABAP keyword documentation.
If you call an HTTP session during a user session, only the HTTP breakpoints are loaded when the HTTP session is started. You activate HTTP debugging in the ABAP Editor by choosing Utilities ® Settings ® HTTP Debugging. Depending on the setting, the system then displays either the HTTP or standard breakpoints in the Editor.
If you call an update session during a user session, breakpoints that were defined beforehand in the calling processing unit are copied to the new update session, where they can be displayed under Breakpoints. If, in the ABAP Debugger, you check Update Debugging under Settings and then, for example, call the update module func using CALL FUNCTION func IN UPDATE TASK, a new window is opened in which you can debug this function module in the update session. All the breakpoints that were set in the calling processing unit can also be processed here.
For further information on special breakpoints, refer to:
Breakpoints at Statements
Breakpoints at Subroutines
Breakpoints at Function Module Calls
Breakpoints at Methods
Breakpoints at System Exceptions
h2 page break h2
WINDOW TYPES
When defining a layout set window, you must select a window type for the window. You can choose between three types:
Constant windows (CONST)
Variable windows (VAR)
Main windows (MAIN)
CONSTANT WINDOW
A window of type CONST has the same contents and size on all layout set pages, on which a corresponding page window is defined. This allows the processing of the window contents to be optimized internally.
Page windows whose allocated window is of type CONST must have the same size throughout the layout set. If a window of type CONST is full, all remaining text the application program wants to output in this window, is lost. Constant windows do not trigger a page break. In other words: all text exceeding the window size is simply truncated.
VARIABLE WINDOW
The contents of variable windows is processed again for each page, on which the window appears. The system outputs only as much text as fits into the window. Text exceeding the window size is truncated; the system does not trigger a page break. Unlike constant windows, the page windows declared as variable windows may have different sizes on different layout set pages.
As far as the processing of the window contents is concerned, the system currently treats constant and variable windows alike. The only difference is that constant windows have the same size throughout the layout set.
MAIN WINDOW
Each layout set must have one window of type MAIN. Such a window is called the main window of the layout set. For SAPscript layout sets, the main window has a central meaning:
It controls the page break.
It contains the text body that may cover several pages.
It allows to fix text elements at the upper and lower margins of the allocated page window (for example, for column headings).
As soon as a window of type MAIN is full, SAPscript automatically triggers a page break and continues to output the remaining text in the main window of the subsequent page. Page windows of type MAIN have the same width throughout the layout set. The SAPscript composer thus avoids reformatting of the text after each page break.
If a page does not have a main window, the system implicitly processes all other windows of the page and continues with the subsequent page. This page must not call itself as subsequent page (recursive call), since this would produce an endless loop. In such a case, SAPscript terminates the output after three subsequent pages.
HOW THE COMPOSER WORKS
The composer or layout set processor is the central formatting module for the print output. It prepares the texts for the different output devices by using the allocated styles or layout sets.
Processing a layout set happens in a certain order. You must know some facts concerning the different window types, the setting of subsequent pages, or the dynamic control from within the print program.
Page control in layout sets
Define subsequent page statically
Define subsequent page dynamically
Format a layout set page
PAGE CONTROL IN LAYOUT SETS
SAPscript automatically triggers a page break as soon as the main window of one page is full. To be able to execute the page break, the system must know on which subsequent page to continue outputting the text. You can specify the subsequent page either statically when defining the layout set, or you can set the subsequent page dynamically during layout set output.
If the subsequent page is not specified, SAPscript automatically terminates printing, thereby ignoring any other output statements of the application program.
DEFINE SUBSEQUENT PAGE STATICALLY
You define the subsequent page statically with the layout set maintenance transaction. First, specify the start page in the layout set header. The system automatically calls this page whenever the layout set is started. With this page, or, more correctly, with the page window of this page, the text output starts. For each page, specify the subsequent page in the page definition. After a page break, the system continues text output on the subsequent page defined for the last page. By specifying start page and subsequent pages, you can define a page sequence.
DEFINE SUBSEQUENT PAGE DYNAMICALLY
The page sequence set in the layout set definition can be changed by the application program dynamically at runtime. If you want the layout set to start with a page other than the one defined in the layout set header, specify the desired start page using the parameter STARTPAGE when you call the function module START_FORM. However, this new start page is valid only for the current call of the function module.
If you want to break to a subsequent page other than the one specified in the page definition, use the control statement NEW-PAGE to set the name of the new page.
NEW-PAGE .
NEW-PAGE ends the output on the current page. The new subsequent page is only valid for the current call of the control statement. You can either include the control statement explicitly into the text of a text element or pass it to the layout set output using the function module CONTROL_FORM.
FORMAT LAYOUT SET PAGE
The process of formatting the output is controlled by the text contents in the BODY area of the main window. If the main window is completely filled, or if the control statement NEW-PAGE appears in the main window, the system executes a page break. Only at this point in time the system formats the contents of the windows of the other types and replaces the variables with the current values.
For each other window, the system first outputs the default text element, if it exists. Then it processes and formats the list of the active text elements of this window, which you set using the function module WRITE_FORM with the parameter FUNCTION (SET, APPEND, DELETE). Any text that does not fit into the page window is truncated.
As a consequence to this processing order of the composer, the reservation of space for the TOP and BOTTOM areas must be made beforehand. If the BODY area of the main window already contains text, a new text output to the TOP area does not appear on the current page but on the subsequent page in the TOP area. The same applies for the BOTTOM area. If the BODY area is filled to such an extend that the new BOTTOM text no longer fits into the current main window, this text appears on the subsequent page in the BOTTOM area.
A frequent error in application programs is that for the subsequent page (for example, NEXT) of a layout set no main window is defined. If the formatted text of the previous page did not fit into the corresponding main window , the composer searches the subsequent pages for a main window to output the text remainder. However, if the subsequent page of NEXT is NEXT again, the composer encounters an endless loop.
To be able to create correct page breaks in longer text, you should define a main window on each layout set page.
LAYOUT SET CONTROL
To output SAPscript layout sets, in the print program you must always start the output with OPEN_FORM and end it with CLOSE_FORM. The function module OPEN_FORM initializes the SAPscript composer and opens the specified layout set for subsequent output. The system combines all output for this layout set up to the CLOSE_FORM to one print request. If CLOSE_FORM is missing, nothing will be printed.
To output data in a layout set, you must use the SAPscript function modules WRITE_FORM, WRITE_FORM_LINES, and CONTROL_FORM. You can use these function modules any number of times in any order between opening and closing a layout set.
You cannot use the ABAP/4 statement WRITE to write output to a SAPscript layout set.
Several print requests
Start a layout set again
Switch layout sets
Find layout sets
SEVERAL PRINT REQUESTS
Within one transaction, you can open and close several layout sets using OPEN_FORM and CLOSE_FORM, however not simultaneously. You can use parameters in the OPEN_FORM to control whether the output is stored in the same print request. But also the SAP spool decides, depending on several plausibility checks, whether new output is appended to an existing print request or whether to create a new print request anyway.
CALL FUNCTION 'OPEN_FORM'
CALL FUNCTION 'CLOSE_FORM'
CALL FUNCTION 'OPEN_FORM'
CALL FUNCTION 'CLOSE_FORM'
You cannot combine ABAP/4 list output and SAPscript output in one print request.
START A LAYOUT SET AGAIN
Usually a print program does not print only one urging letter or one account statement, but several layout sets for different customers. To have the output for each customer begin with the start page of the layout set, you must start the current layout set again and again.
To start a layout set again, you must first end the current layout set and then open the layout set again. Within one print request, first call the function module END_FORM. It executes the final processing for the current layout set. Then start the layout set again using START_FORM. Output then begins again on the start page of the desired layout set.
CALL FUNCTION 'OPEN_FORM'
CALL FUNCTION 'START_FORM'
CALL FUNCTION 'END_FORM'
CALL FUNCTION 'START_FORM'
CALL FUNCTION 'END_FORM'
CALL FUNCTION CLOSE_FORM
If you use START_FORM and END_FORM, you must not specify a layout set for OPEN_FORM. However, in this case you can use the SAPscript output functions only after opening a layout set with START_FORM.

I have made with iweb a website on my macbook, now i want to change it, through my imac, how can I get in the program , which is on the mac book. On both computer I have Lion

i have made with iweb a website on my macbook, now i want to change it, through my imac, how can I get in the program , which is on the mac book. On both computer I have Lion

You need to transfer your domain.sites file from your MacBook to your iMac. This is the file where iWeb stores all info and can be found under User/Library/Application Support/iWeb/domain.sites.
Transfer this file from your MacBook to the same place on your iMac and double click the domain.sites file and iWeb will open it on your iMac and you can update your site from there too.

When I upgraded from v4 to v5 my bookmarks was lost. I do have the one that is in the firefox toolbar. Apparently I had a bookmarks add-on. V5 changed my browser how can I determine what the program was and if the bookmarks are still there?

When I upgraded from v4 to v5 my bookmarks was lost. I do have the one that is in the firefox toolbar. Apparently I had a bookmarks add-on. V5 changed my browser how can I determine what the program was and if the bookmarks are still there?

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Websites remembering you and automatically log you in is stored in a cookie.
*Create an allow Cookie Exception to keep such a cookie, especially for secure websites and if cookies expire when Firefox is closed.
*Tools > Options > Privacy > Cookies: Exceptions
In case you are using "Clear history when Firefox closes":
*do not clear Cookies
*do not clear Site Preferences
*Tools > Options > Privacy > Firefox will: "Use custom settings for history": [X] "Clear history when Firefox closes" > Settings
*https://support.mozilla.org/kb/Clear+Recent+History
Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.
Clearing cookies will remove all specified (selected) cookies including cookies that have an allow exception and cookies from plugins.

How can we disable the 'Improvement Program' from all the apps in TCS5?

How can we disable the 'Improvement Program' from all the apps in TCS5, so that the end users are not able to see the option in the help menu?
We have tried changing the value of bUsageMeasurement (HKLM\SOFTWARE\Policies\Adobe\(product name)\(version)\FeatureLockdown) to zero, but it did not help.

You’re probably going to have to contact Support on that one.

How can i run a executable right after a rman job has run?

How can i run a executable right after a rman job has run?
I have a rman job that execute every night. The backup is local.
I want to have a duplicate of the backup on another machine.
I want the executable to sync the directory to execute right after the rman backup.
How can i do this using the job scheduler?
Normaly, i would configure rman to run the backup on both location. But im having trouble with rman regarding this:ORA-600 [2103] on RMAN Backup to NFS mounted file system

Hi,
If the rman job is in fact a Scheduler jobs (appears in the dba_scheduler_jobs view) then you can create a second event-based job that runs after the rman job (and set the raise_events attribute for the rman job).
Instructions are here
Create Event based job
Hope this helps,
Ravi.

How can I see if my program is for more than one user? We think we have bought in design for more users, but can not find out how to get in for more than one?

How can I see if my program is for more than one user? We think we have bought in design for more users, but can not find out how to get in for more than one?

If you bought a CC for team, you can log in at http://adobe.com and insert the e-mail that you gave at the moment at the purchase and than you can manage and see you product/plan/team.
If I was not clear you can use the following link to help you solving your issue:
Creative Cloud Help | Manage your Creative Cloud for teams membership
If your not clear about this situation, contact with an agent of Adobe, by chat or phone. Use the following link to see the type of support you have on this matter:
http://adobe.com/getsupport
I think this will help you.
Regards

How Can I Submit A Concurrent Program Using Form Personalizaton?

How can I submit a concurrent program? Please help!
Thanks in advance
PhuTri

I think the problem in your case coould be that the Concurrent Program you are trying to run has not been registered in the responsibility from which you are runnig it.
For eg. You are trying to run a program from Inventory Super User responsibility and the request group attached to the responsibility is say 'RG Inventory', but the concurrent program which you are trying to run from your inventory super user responsibility is registered under some other request group say 'RG Order Mangement' which is not attached to the nventory responsibility.
So register the program under correct request group and see if this helps you.
Other possibility is that check if you have permission to submit request from that responsibility. You can check this by going to the Menu ->View If the Request menu is disabled then you cannot submit the request.

How can i apply this java program for a jsp page?

import java.io.*;
import java.util.*;
public class FileProcessing
//create a vector container for the input variables
     Vector variables = new Vector();
//create a vector container for the constants
     Vector constants = new Vector();
/*create a string expression container for the equation
     as read from the file */
     String expression = " ";
//create double result container for the final result
     double result = 0;
     public boolean processFile(String filename,String delim)
      //index for values vector
          int num_values = 0;
      //index for constants vector
          int num_constants = 0;
      //current line being read from the external file.
          String curline = " ";
      //start reading from the external file
          try
               FileReader fr = new FileReader(filename);
               BufferedReader br = new BufferedReader(fr);
               while(true)
                    curline = br.readLine();
                    if(curline == null)
                         break;
                //determine the type of current interaction
                    boolean variable = curline.startsWith("input");
                    boolean constant = curline.startsWith("constant");
                    boolean equation = curline.startsWith("equation");
                    boolean output = curline.startsWith("result");
               //on input variables
                    if(variable)
                      StringTokenizer st = new StringTokenizer(curline,delim);
                      int num = st.countTokens();
                      int count=0;
                      while(st.hasMoreTokens())
                           String temp = st.nextToken();
                           if(count==1)
                                byte b[]= new byte[100];
                                System.out.println(temp);
                                System.in.read(b);
                                String inputval = (new String(b)).trim();
                                variables.add(num_values,inputval);
                                num_values++;
                           count++;
                    // on constant values
                    if(constant)
                         StringTokenizer st = new StringTokenizer(curline,delim);
                         int num = st.countTokens();
                         int count = 0;
                         while(st.hasMoreTokens())
                              String temp = st.nextToken();
                              if(count==1)
                                   byte b[]= new byte[100];
                                   System.out.println(temp);
                                   System.in.read(b);
                                   String cons = (new String(b)).trim();
                                   constants.add(num_constants,cons);
                                   num_constants++;
                              count++;
                    // on equation
                    if(equation)
                         StringTokenizer st = new StringTokenizer(curline,delim);
                         int num = st.countTokens();
                         int count = 0;
                         while(st.hasMoreTokens())
                              String temp = st.nextToken();
                              if(count==2)
                                   this.expression = temp;
                              count++;
          // now we are ready to evaluate the expression
                   if(output)
                      org.nfunk.jep.JEP myparser= new org.nfunk.jep.JEP();
                      myparser.setAllowAssignment(true);
                      for(int i=1;i<variables.size()+1;i++)
                         String name = "arg"+Integer.toString(i);
                         myparser.addVariable(name,new Double(variables.get(i-1)
                                            .toString()).doubleValue());
                      for(int i=1;i<constants.size()+1;i++)
                           String name = "arg" +Integer.
                                     toString(i+variables.size());
                           myparser.addConstant(name,new Double(constants.get(i-1).toString()));
               //output is obtained as follows
                      myparser.parseExpression(expression);
                      result = myparser.getValue();
                      System.out.println("Assay value: "+result);
          catch(Exception e)
               System.out.println(e.toString());
          return true;
     public static void main(String[] args)
          FileProcessing fp = new FileProcessing();
          fp.processFile("input.eqn",":");
}//my text file name is: "input.eqn" (given below)
input:Enter Value1:arg1
input:Enter Value2:arg2
input:Enter Value3:arg3
constant:arg4
constant:arg5
Equation:arg1+arg2+arg3
result:

how can i apply this java program for a jsp pagewhy do you want to do this ?
Your program reads from a file on the disk and formats based on a patterm.
Jsp is not intended for such stuff.
ram.

How can I recover my adobe programs without my backup discs

My desktop crashed. I can't find my backup discs for my adobe cs5 illustrator and photoshop. I purchased a new laptop. How can I load my adobe programs on my new laptop. Is there a download? I can't find my security codes but I did register my programs when I first started them. Will adobe allow me to download my programs on my new computer?
thanks for any help I can get.

yes, you can download (use below links) and recover your serial number from your account (https://www.adobe.com/account.html)
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.5 (win), 5.5 (mac) | 5.4 (win), 5.4 (mac) | 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

How can I run external console program, printing output to JTextPane?

How can I run external console program, printing output to JTextPane?
I have a console app. written in C++ and I would like to run in it from java swing app. and I would like to see its output in a JTextPane.

I have used this article
http://www.javaworld.com/javaworld/jw-12-2000/jw-1229-traps.html
to successfully pipe output from jboss batch files to a JTextPane.

How to restrict rights of executed program

Greetings,
I need to execute JAVA programs (student homework), where there is not guaranteed that one of the submission is some kind of trojan horse, which could potentially e.g. delete some important files on a machine, which executes the code.
Is there any simple way how to restrict rights of executed program?
Or how does e.g. tomcat hosting provider guarantee the security?
Thanks in advance.
Edited by: radone on Jun 29, 2008 10:59 PM

Nice example describing using a policy management is here:
[Managing Policy Files|http://exampledepot.com/egs/java.security/UsePolicy.html]
Edited by: radone on Jun 30, 2008 1:50 AM

How Can I do an executable program in Labview?

Similar Messages

Maybe you are looking for