How can I do the difference of position (X2-X1) and (y2-y1) between two (2) cursor distinct ?

Como posso fazer uma diferença de posição (X2-X1) e (y2-y1) entre dois (2) distintos cursor?
Veja uma imagem com o erro: não entendi.
Muito obrigado.
Juscelino.
Solved!
Go to Solution.

You could do something like the following.
Message Edited by altenbach on 02-06-2010 10:02 AM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
CursorDiff.png ‏4 KB

Similar Messages

How Can we force the Hyper-V Replica to use a dedicated network between two hyper-v hosts?

Dear Team,
How can we force Hyper-V Replica to use a dedicated network between two hyper-v hosts?
For live migration, we can choose the desired network in Hyper-V Manager (Use these IP addresses for Live Migration).
I have two 10G adapters teamed together, the virtual switch is created on top as converged network with several vNICs (MangementOS, LiveMigratrion, Backup, etc...)
Each network is set with a specific VLAN to isolate the traffic.
The two Hyper-V hosts are on the same LAN and domain.
Thank you.
Regards,

I have accomplished this by using a DNS pointer specifying an IP address on that dedicated network. That will force traffic done that network.
John Johnston

My ipad is barely charging - how can i tell the difference between iphone 6 charger and ipad

my ipad is barely charging - how can i tell the difference between iphone 6 charger and ipad

See the following page for info on all of Apple's chargers (you'll need to scroll down a bit on that page):
Charge the battery in your iPad - Apple Support

I have an Apple MacBook Pro with 2 USB ports and a MiniDisplay Port. I also have an HDTV with a HDMI port. How can I use the TV as a display without any tethering wires between my computer and the TV?

I have an Apple MacBook Pro with 2 USB ports and a MiniDisplay Port. I also have an HDTV with a HDMI port. How can I use the TV as a display without any tethering wires between my computer and the TV? I have a MiniDisplay Port to VGA adapter, but there are two issues with it: The new display doesn't have a VGA port, and even if it did, I wouldn't want to have my mac constantly attached to the display by a cable. I was looking for a way to use the TV as a display without any wires. Is there some type of bluetooth setup I could use? Please let me know if you have any suggestions.

As I wrote above, I think you should look into the Apple TV yourself. The best place to find information about what it can and can't do and to ask your own specific questions is probably in the Apple TV forum, here:
https://discussions.apple.com/community/appletv/appletv

How can I get the phone numbers in contacts to appear with dashes between the first 3 numbers, the next 3 numbers, and the last 4 numbers? Until very recently it did so. Contacts on my macbook pro does show up this way. I do have a mobile me account an

How can I get the phone numbers in contacts to appear with dashes between the first 3 numbers, the next 3 numbers, and the last 4 numbers? Until very recently
it did so. Contacts on my macbook pro does show up this way. I do have a mobile me account and in the past syncing was no problem. What setting has changed?

The phone number format as well as the date language and format and the time format are controlled by the Region Format setting. Go to Settings > General >International > Region Format. When you change a region format, you can go back one page (to International) and see an example of the date/time/phone number format that your selected region format will produce.

How can i take the pictures from my old ipod and transfer them onto my computer without deleting anything

How can I take the pics from my old ipod and transfer them onto my computer without deleting anything?

Pictures on an iPod are stored in a special format, optimized for the iPod's small lower resolution screen, to save storage space. iTunes puts them into that format when syncing. There is setting in iTunes, on the iPod's Photos screen (where you set up syncing of photos) for Include full resolution photos. If that checkbox was checked when you synced the photos to the iPod, THEN you can Enable disk use and find those photo files on the iPod in the Photos folder.
Otherwise, you cannot get your photos back, using iTunes. There may be third-party utilities that can extract individual photos from the iPod, but they will still be lower-resolution versions of the original photo.

How can I disable the location service of my camera and photos in my iphone 5s?

How can I disable the location service of my camera and photos of my iphone 5s?

Settings>Privacy>Location Services>Camera>OFF.

Got a new iPhone that I've been using for about a month now, so the question is how can I get the pictures from my old iPhone and keep the pictures I have on the new iPhone?

Got a new iPhone that I've been using for about a month now, so the question is how can I get the pictures from my old iPhone and keep the pictures I have on the new iPhone?

Connect old iPhone to computer and save the pictures on computer.
Connect new iPhone and sync the pictures to your new iPhone.

Other than the retina display how may I tell the difference bewteen an iPad 2 and a iPad 3?

Other than the retina display how may I tell the difference bewteen an iPad 2 and a iPad 3?

Here's the various iPad model numbers and order numbers. The model numbers are on the back of the iPad
Apple iPad Wi-Fi (Original) 16, 32, 64 GB
The wi-fi only iPad configurations are assigned model number A1219.
MB292LL/A is the order number for the 16 GB configuration. The 32 GB configuration is assigned MB293LL/A and the 64 GB configuration is assigned MB294LL/A.
Apple iPad Wi-Fi/3G/GPS (Original) 16, 32, 64 GB
The Wi-Fi/3G/A-GPS iPad configurations are assigned model number A1337.
MC349LL/A is the order number for the 16 GB configuration. The 32 GB configuration is assigned MC496LL/A and the 64 GB configuration is assigned MC497LL/A.
Apple iPad 2 (Wi-Fi Only) 16, 32, 64 GB
The wi-fi only iPad 2 configurations are assigned model number A1395.
MC769LL/A is the original order number for the 16 GB configuration in black. The 32 GB configuration in black is assigned MC770LL/A and the 64 GB configuration in black is assigned MC916LL/A. The original 16 GB, 32 GB and 64 GB configurations in white are assigned MC979LL/A, MC980LL/A, and MC981LL/A, respectively. On March 7, 2012, Apple discontinued the 32 GB and 64 GB configurations and assigned new order numbers of MC954LL/A and MC989LL/A for the black and white 16 GB configurations, respectively.
Apple iPad 2 (Wi-Fi/GSM/GPS AT&T) 16, 32, 64 GB
The Wi-Fi/GSM/GPS iPad 2 configurations are assigned model number A1396.
MC773LL/A is the original order number for the 16 GB configuration in black. The 32 GB configuration in black is assigned MC774LL/A and the 64 GB configuration in black is assigned MC775LL/A. The original 16 GB, 32 GB and 64 GB configurations in white are assigned MC982LL/A, MC983LL/A, and MC984LL/A, respectively. On March 7, 2012, Apple discontinued the 32 GB and 64 GB configurations and assigned new order numbers of MC957LL/A and MC992LL/A for the black and white 16 GB configurations, respectively.
Apple iPad 2 (Wi-Fi/CDMA/GPS Verizon) 16, 32, 64 GB
The Wi-Fi/CDMA/GPS iPad 2 configurations are assigned model number A1397.
MC755LL/A is the original order number for the 16 GB configuration in black. The 32 GB configuration in black is assigned MC763LL/A and the 64 GB configuration in black is assigned MC764LL/A. The original 16 GB, 32 GB and 64 GB configurations in white are assigned MC985LL/A, MC986LL/A, and MC987LL/A, respectively. On March 7, 2012, Apple discontinued the 32 GB and 64 GB configurations and assigned new order numbers of MC755LL/A and MC985LL/A for the black and white 16 GB configurations, respectively.
Apple iPad 3rd Gen (Wi-Fi Only) 16, 32, 64 GB
The Wi-Fi Only iPad 3 configurations are assigned model number A1416
MC705LL/A refers to the 16 GB configuration in black. The 32 GB and 64 GB configurations in black are MC706LL/A and MC707LL/A, respectively. The 16 GB, 32 GB and 64 GB configurations in white are MD328LL/A, MD329LL/A, and MD330LL/A, respectively.
Apple iPad 3rd Gen (Wi-Fi/4G LTE AT&T/GPS) 16, 32, 64 GB
The Wi-Fi/4G LTE AT&T/GPS iPad 3 configurations are assigned model number A1430
MD366LL/A refers to the 16 GB configuration in black. The 32 GB and 64 GB configurations in black are MD367LL/A and MD368LL/A, respectively. The 16 GB, 32 GB and 64 GB configurations in white are MD369LL/A, MD370LL/A and MD371LL/A, respectively
Apple iPad 3rd Gen (Wi-Fi/4G LTE Verizon/GPS) 16, 32, 64 GB
The Wi-Fi/4G LTE Verizon/GPS iPad 3 configurations are assigned model number A1403
MC733LL/A refers to the 16 GB configuration in black. The 32 GB and 64 GB configurations in black are MC744LL/A and MC756LL/A, respectively. The 16 GB, 32 GB and 64 GB configurations in white are MD363LL/A, MD364LL/A, and MD365LL/A, respectively.
 Cheers, Tom

How can I cancel the storage plan I just bought and get a bigger plan?

How can I cancel the storage plan I just bought and get a bigger plan?

I quote:
'If you purchase a higher-tier storage plan for your iCloud account to replace your existing storage plan (for example, a 20 GB plan to replace a 10 GB plan), the existing plan will be canceled and you will receive a prorated refund for the time remaining. The new storage plan is applied to your iCloud account and the annual payment date is updated to reflect the purchase date for the new plan.'
So just purchase the new storage level and it will sort itself out automatically.

In ical, how can you tell the difference between a meeting invite and email?

When you send a meeting invite in ical, does the recipient receive a different icon in their inbox to differentiate from an email?

For service stock you can't tell the difference between a new iPad and a refurbished one. Both will come in a plain brown box with the same pattern in model numbers. If you mean between a refurbished one and one new at retail, then other than the obvious difference in packaging, I've read that the model number on refurbished units starts with the letter "F", though I've not confirmed that.
Regards.

How can you tell the difference between ipad 2 and ipad 3 ?

I need to know how can you tell the defferance between the Ipad 2 and Ipad 3 by just looking at it ?

Well it hard to tell if you don't have the two side by side and compair it to...

HT4060 How can i tell the difference between chargers

How can i tell the differance between chargers

Believe it or not, they are identified right on the chargers themselves. Unfortunately, the font is real small and the print is gray on a white background. It's nearly impossible to read. You need a bright light and a magnifying glass!
After determining which is which, you might wish to put your own paper labels on them.

How can I obtain the first 10 charcter from field and the last 4 characters

Hi
   I need to obtaind the first 10 characters from field AWKEY from BSEG table, and the last 4 characters, how can I obtain certains position from field??
    Example:
AWKEY field from BSEG can be for example :
51000573112002
   This mean that you can obtain separately:
5100057311 - BELNR (field)
2002- GJAHR (field)
    As you can see, the first 10 positions are BELNR and the last 4 positions are GJAHR.
     But sometimes you find in old rows:
5100057312US502001
     This mean that you can get from this field:
10 positions for BELNR : 5100057312
4 positions for BUKRS or WERKS : US50 - in this case, I don´t know if its is BURKS or WERKS...for this reason only I want to take only the first 10 positions and the last 4 position to compare.
4 posiition for GJAHR: 2001
   I rewards all the answers.
   Thank you.
Alicia

Hi, thank you for yours answers
Let me try to explain more what I need to do:
I have a Internal Table that I create with EKBE table:
SELECT MANDT EBELN EBELP GJAHR BELNR BEWTP BUDAT
          MENGE WRBTR WAERS WERKS SHKZG DMBTR
          ZEKKN VGABE BUZEI
    INTO CORRESPONDING FIELDS OF TABLE LIST_EKBE
    FROM EKBE
      WHERE EBELN IN R_EBELN
        AND BEWTP IN ('E','Q','R').
The result is all the rows that have this conditions..then with this internal table I need to looking for each BELNR in BKPF table, but sometimes you can find the row compare EKBE-BELNR with BKPF-BELNR...but in many cases, you don´t find the row in this way, you need to add EKBE-BELNR and EKBE-GJAHR and looking for in BKPF with field AWKEY..
For this reason I CONCATENATE in this way:
LOOP AT LIST_EKBE.
    V_BELNR = LIST_EKBE-BELNR.
    V_GJAHR = LIST_EKBE-GJAHR.
    CONCATENATE V_BELNR V_GJAHR INTO V_AWKEY.
    SELECT SINGLE MANDT BUKRS BELNR GJAHR AWKEY
    INTO (BKPF-MANDT, BKPF-BUKRS, BKPF-BELNR,
         BKPF-GJAHR, BKPF-AWKEY)
    FROM BKPF
    WHERE AWKEY = V_AWKEY.
ENDLOOP.
But I saw that sometimes you don´t find the record in BKPF because the AWKEY is formed with BELNRBUKRSGJAHR....or may be with BELNRWERKSGJAHR ...I don´t know if is BUKRS or WERKS the second field...for this reason I try only read in the select..if its posible the first 10 postions and the last 4 positions...but Im not sure if its possible..
The reason for that I looking for the BELNR field in BKPF field for AWKEY its because sometimes de BELNR in BKPF its different..example:
In EKBE you have:
BELNR: 5105618260
GJAHR: 2006
If you looking for in BKPF you don´t find sometimes exactly the field BELNR : 5105618260.. then you need try looking for the AWKEY field then you need to add BELNR+GJAHR..example:
BKPF:
BELNR: 5105611111
GJAHR: 2006
AWKEY: 51056182602006
But in other cases... I found that in AWKEY exist for example:
BELNR: 5105611111
GJAHR: 2006
AWKEY: 5105618260US502006
In the last case I supouse that I can divide in:
AWKEY: 5105618260-US50-2006 ... but I don´t know what its the field that have the information US50..may be is BUKRS or may be its WERKS
May be some people know what its exactly this field and can help me..
With the solution that some of yours give me..I don´t know the how I can make the select? and if its posible make in this way
Thank you a lot

My Safari Icon ( Button) is missing in my iMac after I downloaded a update. How can I get the icon back on my desktop and connecting again to the Internet ?...

My Safari Icon ( Button) is missing on my iMac after I downloaded a update. How can I get the icon (Button Safari) back on my desktop and connecting again to the Internet ?...
Thanks for the help

Often when people think they've deleted an application, what's really happened is that they deleted its icon from the Dock. In the Finder, select
Go ▹ Applications
from the menu bar, or press the key combination shift-command-A to open the Applications folder. If the application is in that folder, drag it to the Dock (not to the Desktop or anywhere else.) The other Dock icons will move out of the way to make a place for it.

How can I do the difference of position (X2-X1) and (y2-y1) between two (2) cursor distinct ?

Similar Messages

Maybe you are looking for