How can i do to reappear the hd icon on the disk utility
In this day my computer erase all the program,files, and the operating sistem. i need to format my computer but when i go to install the operatting system again the hd icon dont appear. What can i do?
im running whith the cd install 1 and then go to the menu bar and in disk utility.
Then in the disk utility it doesn't appear anything no appear the H D and no appear the driver of cd or dvd . How can it be possible that all the computer is in blank. I make the test of the hardware (by pressing the D of the keypad when is starting) and the result was the hardware don't have any problem.
Similar Messages
-
How Can I Minimize a VI to an Icon on the Windows System Tray?
How Can I Minimize a VI to an Icon on the Windows System Tray?
There are some examples available online, using both ActiveX and .NET. Try searching for "tray icon".
It's been a while since I looked at it, but if memory serves, the structures needed to load an icon through the Win32 API are actually quite complicated and not as simple as that article makes them out to be.
Try to take over the world! -
How can Time Machine restore older Mac Pro's - But not Disk Utility?
Hey,
So I had posted a discussion earlier last week asking about older MacPro's (2006 - 2008) versions that do not seem to run snow leopard if you just try to install with the MAC OS X 10.6.2 disc - I was trying to use my new Snow Leopard image that i have created for the new school year, and I tried to image a 2006 MacPro model and a 2008 MacPro model, etc... This would not work, it would let me start the imaging process and then it would give me an error that looked like this "ev/disk02o does not have enough space" And i just figured that was the computer code way of telling me that the image i had created was not readable by the computer or the disk utility, but this must be something that was written into the programing of Disk Utility or Snow Leopard because i found a loop hole - I was able to "restore" the backup of the new image that i made using Time Machine on the 2008 MacPro and even the 2006 MacPro - which both have earlier versions of the Intel chip. The restored image works fine, all programs work the same as a 2009 MacPro that i imaged the same image onto using disk utility and i have found no problems yet using any part of the system. MY QUESTION: I'm wondering how i was able to do this and if anyone has had a similar experience trying to get images accross a bunch of different models of MacPro's - Is Time Machine a "better" way to restore the disk image? Did Apple do this on purpose, so that you cant image newer images onto older machines? Very confused as to why it makes you use Time Machine...
Thanks again,
Kyle R.You are reading things into that error message that are simply not there.
Take the error message at face value.
When it calculates all the "stuff" it has to get onto your disk to do the installation, it does not fit. (including the .dmg, the Virtual Disk created to mount the dmg, and all the temporay files that are added before the new version takes over and discards the old stuff) all that stuff in total does not fit.)
Sure the final image fits, and sure you can restore that final image using other methods: Time machine works, and I'll bet Carbon Copy Cloner and Super Duper work as well.
Using the method you were using, the sum of all the temp files and all the program files do not fit. It is NOT a conspiracy. -
When I open a page in Safari, there is a bar to the left side that obscures some of the text on the page. It contains icons for different ways of sharing a page, such as Facebook, tweet etc. I would like to make them go away. But they seem stuck there.
I couldn't agree with you more! I just reposted the question, hoping someone will know how to say "adios" to them!
Larry -
By mistake I disconnected my iPod (5th generation) when it said Do not disconnect. Now it doesn't appear in iTunes, but it does appear on my desktop. How can I get to reappear in iTunes? I have tried resetting and rebooting. And my iTunes is up to date on my macbook pro, mountain lion, OS X 10.8.
Thank you!The iPod's filesystem may be corrupted. This may seem like overkill, but it has been known to help many others in the same boat. Try doing a low level reformat of the iPod's hard disk using the instructions in this article.
http://www.methodshop.com/gadgets/ipodsupport/erase/
B-rock -
How can I Publish to a Folder just one of the several websites I have created using iWeb?
How can I Publish to a Folder just one of the several websites I have created using iWeb?
it drives me nuts having to emove all the other websites when I want to upload one.
SparrowFor iWeb, I like to do only one site per domain file. I move domain files out of the Application Support folder and place them inside project or client folders, or in DropBox. Once you duplicate a domain file and begin customizing it, it will load and behave as a separate project/site.
I publish each iWeb domain/project direct to a server via FTP. Sometime I publish to a folder, then upload via FTP manually.
iWeb is a remarkable tool, especially when you work from scratch with blank tamplates
Here are a few of my iWeb sites:
http://www.newcovenant.org
http://www.visionmultimedia.org
http://www.visioncomsolutions.com -
How can I get all tracks from an album into the album in my library?
When importing the albums from a folder, the tracks for some of the albums were split up. How can I get them in one?
Hello JudyD276
The article below will give the steps to get the songs grouped together for you.
Why aren't songs with the same album art grouped together?
http://support.apple.com/kb/TS1468
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
How can i remove iTunes 10.1.0.54 saying the feature you are trying to use is on a network resource...enter an alternate path to a folder contaning the installation package 'iTunes.msi'?
< Edited by Host >Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. (The results from mydigitallife and Major Geeks are worth checking.)
After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove".
Quit out of CleanUp. Restart the PC, and try another iTunes install. Does it go through properly this time? -
How can I print double sided from my MacBook? The option is not highlighted,
shazmina2This function is related to the printer driver and the printer you use. If you do not give details, nobody can suggest a solution. Usually, the correct driver solves the issue.
-
This initially started out as me trying to get my battery to work. my battery was dying after a few minutes so I was trying to kill the battery and recharge it to see if I couldn't get it back to a full charge. This didn't work but after a day or so I noticed the computer running slow and when I went to start it a couple days later the apple icon page would pop up and the little grey wheel would just whir away below it like it was thinking. The screen was kinda hard to see. Since then I have tried several different things to get the computer to fire back up as it should. I have taken out the battery and left it hoping the internal battery would die and it would reset itself to a default mode. Didn't work so I then tried taking the battery out and just using the power cord. This didn't work. I tried putting the battery out and in while running on the power cord. this didn't work. I have tried holding the "alt/option" key and that didn't work. Although it did give me a different window. I have tried holding down the "f" keys. That didn't work. I have tried installing a disc to try and reinstall the operating system. That didn't work. I had to shut it down and restart it holding down the eject key to get the disc back. I am running out of things I can think of to try so if anyone has any ideas I am open to all of them.
Thank you,
SeldovianMac OS X: What is Safe Boot, Safe Mode?
Mac OS X: Starting up in Safe Mode
I have tried installing a disc to try and reinstall the operating system.
Disconnect all peripherals from your computer. Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
Restart your computer when done.
Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751 and restart your computer.
If you did manage to reach the desktop after doing any of the above
my battery was dying after a few minutes so I was trying to kill the battery and recharge it to see if I couldn't get it back to a full charge.
Apple/About This Mac/More Info/Hardware/Power/Battery Information - copy and paste the information here. Do not include any serial numbers.
I noticed the computer running slow
How large is your hard drive and how much hard drive space do you have left?
Mac OS X (10.4.3)
Update to 10.4.11 using the combo update or Software Update along with all the other updates that goes along with it. -
How can I create multiple versions of a video within the same project?
OK...this is a probably a very basic question but I'm not sure how to word it clearly.
How can I create multiple versions of a video within the same project? What I mean is that I have a bout 50 minutes of video and I want to make two DVDs using different clips from this original 50 minutes of footage. It would be a real pain to have to re-import the video AGAIN for the second DVD. I suppose I could drop anything I don't want to burn to DVD back into the clips pane but that would wipe out all my transitions wouldn't it? I want to save each project in their “raw” form so I can burn additional DVDs later otherwise I would just do them one at a time and not care about one of them being destroyed.
Wow...that was a mess. Does anyone understand what the heck I’m asking? I hope so.How can I create multiple versions of a video within the same project?
You can't. You make separate projects using the same or different clips, segments, transitions, titles, etc. You can even duplicate the first project and then modify/make the desired changes in the duplicated project. Each project can then be burned as a different DVD or as different titles on the same DVD if there is enough room. -
Hi. I have shared an Apple ID with my children for some time. As they are getting older they do not wnat me seeing all their messages, photos etc so want their own accounts. How can they access their purchased music and apps on the new account please?
Yes.
On their iOS devices, under Settings>iTunes & App Store, they should use your Apple ID. When they log into iCloud, iMessage and Facetime, they should use their personal Apple IDs. -
How can I pass multiple condition in where clause with the join table?
Hi:
I need to collect several inputs at run time, and query the record according to the input.
How can I pass multiple conditions in where clause with the join table?
Thanks in advance for any help.
Regards,
TDIf you are using SQL-Plus or Reports you can use lexical parameters like:
SELECT * FROM emp &condition;
When you run the query it will ask for value of condition and you can enter what every you want. Here is a really fun query:
SELECT &columns FROM &tables &condition;
But if you are using Forms. Then you have to change the condition by SET_BLOCK_PROPERTY.
Best of luck! -
I have a large number of photos imported into iPhoto with the dates wrong. How can I adjust multiple photos (with varying dates) to the same, correct, date?
If I understand you correctly, when you enter a date in the Adjust Date and Time window, the picture does not update with the date you enter. If that is the case then something is wrong with iPhoto or your perhaps your library.
How large a date change are you putting in? iPhoto currently has an issue with date changes beyond about 60 years at a time. If the difference between the current date on the image and the date you are entering is beyond that range that may explain why this is not working.
If that is not the case:
Remove the following to the trash and restart the computer and try again:
Home > Library > Caches > com.apple.iphoto
Home > Library > Preferences > com.apple.iPhoto (There may be more than one. Remove them all.)
---NOTE: to get to the "home > library" hold down option on the keyboard and click on "Go" > "Library" while in the Finder.
Let me know the results. -
how can I unlock my iphone??? on the screen I only have the apple logo and a thing that looks like if the phone is working but no advance
Hi,
Try a Reset of the Phone... You will Not Lose Any Data...
Turn the Phone Off...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
The Apple logo will Appear and then Disappear...
Usually takes about 10 - 15 Seconds...
Turn the Phone On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
Maybe you are looking for
-
Can you change your iphone to a new account, without wiping the phone?
Hi I have a macbook pro and an iphone and my mum has an iphone. But the problem is that my mums iphone is hooked up with my itunes account and i want to create her, her own. We use separate laptops, but im sick of not being able to use imessages or i
-
We had two flip phones thru Verizon. Used it for phone calls only, any text separate charge. In nov I purchased I phone 5s. Continued the same phone service with verizon. I used my wifi thru my land line phone service. I was getting my land line
-
How can i unlock my iphone 4 Help me
-
10.1.3.3 setup Java problem when upgrading from 10.1.3.2
Hi guys! I have a problem with upgrade from 10.1.3.2 to 10.1.3.3 on Windows The documentation is old what you can download! So I cannot find anything. The Infrastructure Installation and Configuration Guide is for 10.1.3.2.1 and from april 2007 The I
-
Kernel upgrade : cannot find AMD64
Hi, I cannot find a kernel upgrade for Windows 2003 64Bit in the software downloads. Status Host Data Machine Machine Type: 4X AMD64 L OS : Windows NT Componenet version SAP ECC 6.0 Please help.