How can i do to see the master and text values of the Key figure 0UNIT

Hi gurus,
How can i do to see the master and text values of the Key figure 0UNIT, please step by step, i m in the key figure 0UNIT but i want to see if the UNIT for example BX = BOX, something like this is that i want to check, thanks!

If you look at the unit tables, you will see the values and texts. It's in SPRO, not in RSA1. My access is limited on my system here, but the documentation says to go to t-code CUNI. I believe in that tcode you can look at all of the unit equivalencies and what each unit's text is ..... like an ea means each; KG = Kilogram; etc...
I am on an 3.x system, so in SPRO I go to BW CIG=>General Settings=>Check units of measurement.
Brian

Similar Messages

How can i get my iPhone, ipad mini and mac to show the same contacts calendar and notes

how can i get my iPhone, ipad mini and mac to show the same contacts calendar and notes

Plug the phone and iPad into your computer and sync them.

How can i fix my iphone 3g if and only it displays the apple logo when it is connected to its charger but it displays nothing when the charger is removed?

how can i fix my iphone 3g if and only it displays the apple logo when it is connected to its charger but it displays nothing when the charger is removed?

Plug it into a wall outlet and leave it plugged in for approximately 20 minutes.
Then try a reset by pressing and holding the home and power buttons for 15-20 seconds.
Does the device power on at this point? If not, the battery or logic board is gone.
Take it to Apple for evaluation.
It may be worth replacing the battery, but I personally wouldn't spend the $149US for an Out of Warranty replacement on a 3+yr old device.

How can i deauthorize a computer that crashed and is now in the trash world? i purchased a new laptop and need to authorize my computer

how can i deauthorize a computer that crashed and is now in the trash world? i purchased a new laptop and need to authorize my computer

You cannot, nor do you need to, until you reach the limit of 5. Once you reach 5, then you can deauthorize all, and then authorize the active computers.

How can i solve "could not load language and text preference "

how can i solve " could not load language and text preference ".. help everyone...

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

I need to know how to edit a drawing - basically remove the arrows and text but at the same time match the background of the existing pic. then re add new text. how do i erase the arrows and text and arrows but match current background of pic. step by ste

i need to know how to edit a drawing - basically remove the arrows and text but at the same time match the background of the existing pic. then re add new text. how do i erase the arrows and text and arrows but match current background of pic. step by step explanation please beginner

Please post (a relevant section of) it right on this Forum.

How can I take music from an USB and transfer it to the iPod? It tells me use use itunes to sync but the music is on an USB drive. It had worked in the past. Tks

How can I transfer music from an USB drive to the iPod. I can see the music and play it on the computer, but the iPod tells me to use iTunes to sync. The music is not on iTunes. It has worked in the past.....tks

These are just playlists. The songs there are really not duplicates of the songs. They are just a different location for accessing them. Some playlists can be deleted, some cannot. Ones that are created by iTunes cannot be deleted. Ones that you create can be. The Recently Added and the 90's cannot.

How can i put one part in front and one part in the back?

Alright i made this phone and a person and i want to put the bottom in front of his chin and the top behind the ear. How should i do this? Couldnt find anything in my classroom in a book, book.
thanks

The part in front and the part in back have to be two separate objects. Put a rectangle to completely cover the bottom part of the phone and let it mask the whole phone. Copy the clipping group (or duplicate its layer in the layers panel); on the copy, direct-select the end of the mask rectangle that doesn't bisect the phone and drag it the other way, so the rectangle now covers (and crops) the top half of the phone. If you do this on layers you need only make sure the phone-bottom is on the top layer, phone-top is on the bottom layer, and the person layer is between them.

How can i check to see if an object is already in the array list?

while (res.next()) {
                Schedule schedule = new Schedule();
                customerName = res.getString("CUSTOMERNAME");
                schedule.setCustomerName(customerName);
                magName = res.getString("MAGNAME");
                schedule.setMagName(magName);
                System.out.println("NAME: " + customerName);
                System.out.println("MAGNAME: " + magName);
                if(!scheduleListH.contains(schedule)) //this won't work
                    scheduleListH.add(schedule);
            }schedule object has 2 fields, customerName and MagName;
Basically i want to say, IF the scheudleList (which is an array list) contains an object schedule that has the same customerName and MagName as any of the objects in the array list, don't readd the object.
ANy help would be great!

Thanks!
Oops I forogt I could use the .contains, i also tried that but still no luck.
There is no compiler error but here is an example of the output:
Populating scheudle list for HOLIDAY selection data structure:
NAME: Cory
MAGNAME: Merlin
NAME: Brandon
MAGNAME: Gondorf
NAME: Chris
MAGNAME: Houdini
NAME: Lokie
MAGNAME: Blaine
Sample SCHEDUEL H [Cory          Merlin, Brandon          Gondorf, Chris          Houdini, Lokie          Blaine]As you can see, There are 4 objects in the array list:
Cory Merlin
Brandon Gondorf
Chris Houdini
Lokie BLaine
Now this function is called everytime the user choses a new item in a combo box.
So if they go back to the previous selection, Holiday's, it shouldn't read add all the orginal things.
But if I go up and select the same item in the combo box it changes whats in the array list to the following:
Populating scheudle list for HOLIDAY selection data structure:
NAME: Cory
MAGNAME: Merlin
NAME: Brandon
MAGNAME: Gondorf
NAME: Chris
MAGNAME: Houdini
NAME: Lokie
MAGNAME: Blaine
Sample SCHEDUEL H [Cory          Merlin, Brandon          Gondorf, Chris          Houdini, Lokie          Blaine, Cory          Merlin, Brandon          Gondorf, Chris          Houdini, Lokie          Blaine]Here's my whole function if your interested and where I call it:
    void populateSchedule(String holiday) {
        Statement sta = null;
        Connection connection6 = null;
        try {
            connection6 = DriverManager.getConnection(URL, USERNAME, PASSWORD);
            sta = connection6.createStatement();
            //getting the list of magicians from the selected holiday to see if any are free
            ResultSet res = sta.executeQuery(
                    "SELECT CUSTOMERNAME, MAGNAME FROM SCHEDULE WHERE HOLIDAYNAME = '" + holiday + "'");
            String customerName = " ";
            String magName = " ";
            System.out.println("Populating scheudle list for HOLIDAY selection data structure: ");
            //this is where I add the waiting list objects to the array that will later be used
            //to print out and shown to the user when they select the waiting list status
            while (res.next()) {
                Schedule schedule = new Schedule();
                customerName = res.getString("CUSTOMERNAME");
                schedule.setCustomerName(customerName);
                magName = res.getString("MAGNAME");
                schedule.setMagName(magName);
                System.out.println("NAME: " + customerName);
                System.out.println("MAGNAME: " + magName);
               if(!scheduleListH.contains(schedule))
                   scheduleListH.add(schedule);
            System.out.println("Sample SCHEDUEL H " +   scheduleListH);
        } catch (SQLException ex) {
            System.out.println(ex);
            ex.printStackTrace();
        } finally {
            try {
                sta.close();
                connection6.close();
            } catch (SQLException ex) {
                Logger.getLogger(Database.class.getName()).log(Level.SEVERE, null, ex);
//this is where i call in the GUI
    private void specStatusComboBoxActionPerformed(java.awt.event.ActionEvent evt) {
        // TODO add your handling code here:
        String selectedItem = (String)specStatusComboBox.getSelectedItem();
        String groupSelectedItem = (String) groupStatusComboBox.getSelectedItem();
        if(groupSelectedItem.equals("Holidays"))
            //get customer name and magician name from the Scheduel table
            //use selectedItem (it will be a holiday name)
            //magicDB.clearScheduleHList();
            magicDB.populateSchedule(selectedItem);
            ArrayList<Schedule> tempScheduleList = magicDB.getScheduleHListCopy();
            outputTextArea.setText(" ");
            outputTextArea.setText("CUSTOMER NAME" +"\t\t" + "MAGICIAN NAME" + "\n");
            for(int i = 0; i < tempScheduleList.size(); i++)
                outputTextArea.append(tempScheduleList.get(i).toString() + "\n");
    }   I'll reward the duke stars anyways because you have been a great help either way!

HT1178 My Time Capsule is only blinking amber. My computer tried to backup but I don't know how to tell if it did in fact back up the data. How can I tell if it backed up and why doesn't the light show green?

Just purchased a Time Capsule. Had to call Comcast to disable the WIFI and have internet connection. The time capsule though blinks amber and the Airport Utility shows blinking amber light and has a red circle with the number 1 in it. After connecting, my computer tried doing a backup for the first time and it appeared that it was backing up and finished although I don't know how to check to make sure that it did backup. How do I check and shouldn't the light on the time capsule be blinking green and the airport utility show green?

TM will show it has done a backup.. Look at the info.. when was the backup completed??
If you want more details install the widget.
A1 here.
http://pondini.org/TM/Troubleshooting.html
The time capsule though blinks amber and the Airport Utility shows blinking amber light and has a red circle with the number 1 in it.
There is an error.. probably trivial.. firmware update, default password..
Open the airport utility and find out what the error is.
Simply click the TC and see status in the summary page.. it will list all the errors and what you should do.. fix or ignore them. ie this TC has an error.. default password.. I chose to ignore.. when I "fix" the problem the LED goes green.
Here is additional TC.. it is blinking amber with faults.
Click the fault. eg default password.
You can ignore or edit .. if you click edit it will take you to the full setup where you can change the settings.
I ignored my errors and now it is green..

How can I get Firefox to "grab onto" and then "hold onto" the data signal until I tell Firefox to release it at the end of my session of internet browsing?

ok, I hope that my description of this problem does not come out in such a disorganized fashion that it makes the description difficult to follow. here goes: every 30 seconds to 1 minute (or thereabouts, I'm estimating) my mobile phone's browser (whether Firefox or any other) loses the data signal, so that tje next time that. I click on something, I get an error message that the "data connection timed out, retry" or "network unavailable" or "check that you are connected to that internet", etc. etc. etc. I have downloaded many apps that are supposed to boost data connectivity and/or improve internet speed, blah, blah, blah, till I discovered that was a problem with the server being able to keep up with staying locked onto my browser. in one of these apps diagnostic screens, I found a notation that therr was something wrong with my cell's relative position. well, how could that be, I wondered, since I had "GPS tracking" "GPS reporting" and "location sharing" all enabled? but, then I noticed, on the image of my cell's location as represented by this particular app, that every half minute, or so, the blue dot which represented my cell's location would slip to the left about one quarter of an inch, or so, and in the longitude and latitude part of this app's diagnostic screen I saw that the numerical designations of my cell's longitude and latitude were zero and zero. it suddenly occurred to me that the server had lost sight of my cell because my cell had moved too far out of the range of that server's sight due to the rotation of the earth. well, blow me down, what am I supposed to do to fix that? how can I tell my cell phone's OS to send out some kind of identifying info on a constant basis, so that the server could keep track of it (and I would not lose the signal)? or, conversely, how could I get my cell phone's browser to grab onto the signal and not let go of it until I was done with that internet session, at which time I would then manually release the signal myself? I hope that my explanation of the problem made enough sense that you could follow it and that you can come up with a workable solution for me. oh yeah, my phone is an LG OPTIMUS ELITE 696. thanx, from the enragedkangaroo.

Hello,
I'm afraid I don't think there is going to be much we can do to help you here. The description sounds like an issue with the phone rather than with Firefox specifically.
I don't think the problem can be caused by you moving out of range of the cell, due to the rotation of the earth. The cell towers (that provide phone signal) are sitting on the earth, just like you, and so move at the same speed as you. This might be a concern with satellite phones using Low Earth Obit satellites but this isn't the case here.
I think the best thing to do would be to get in touch with your Phone Operator or Device Manufacturer for support. If you are out of the support period or can't get support from them for some other reason then a standard 'cure-all' for mobile phones is to do a Factory Reset. This will return your phone to its default factory settings and wipe all of your data / modifications off the phone. This tends to solve most problems and is probably what the official support team would tell you to do. I can't guarantee that it will help but it has a good chance.
There are instructions on resetting your phone here:
http://www.hard-reset.com/lg-optimus-elite-hard-reset.html
I hope that helps.

How can I share my photos with family with text to ID the photo

I have our families' photos on CD/DVD/my Mac's but I would like to share them with the rest of the families by way of CD/DVD. I'm also probably the only one in my family who could id the subjects in the photo's......how can I use text ON the photo so that they are ID'd for those photos I share with them. Judy

Adding text to a photo is not a feature of iPhoto.
You can do it with
Preview - already on your machine
BorderFX - a free plug-in. (http://www.iborderfx.com/iborderfx/)
or an external editor.
In order of price here are some suggestions:
Seashore (free)
The Gimp (free)
Graphic Coverter ($45 approx)
Acorn ($50 approx)
Pixelmator ($50 approx)
Photoshop Elements ($75 approx)
There are many, many other options. Search on MacUpdate. You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.

HT1689 How can i track my stolen ipod 5 and without wifi because the person who stole it has turned it off

Please help me i bought it a month ago and its very expensive now someone stole it please answer the question

- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
- You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

How can I send iMessages to one contact but text messages to the rest?

Thanks,
Jonathan

My girlfriend lives in the US and I live in Canada. I have unlimited international texting but very little data. She has iMessage but she gets charged for incoming international texts.
So, I want to use iMessage only for her (so she won't get charged) and text for everyone else since I have little data and I already have unlimited texting.
Just as clarification.
Thanks

Not able to see max, pref and timeout value in the debug output

Hi,
I have enable connection pooling for the ldapcontext. and have set init, pref and max pool size as 1,3,5 respectively.
However when i am running this program i am getting following output...
Also it is returning me busy connections some times?
I am using auth type as 'none simple' and protocol as 'plain'. [i am using jdk 1.5.0_2].
What can be the problem?
=======
***** start *****
idle timeout: 0
maximum pool size: 0
preferred pool size: 0
initial pool size: 1
protocol types: plain
authentication types: none simple
anonymous pools:===== Pool start ======================
maximum pool size: 0
preferred pool size: 0
initial pool size: 1
current pool size: 0
====== Pool end =====================
simple auth pools:
===== Pool start ======================
maximum pool size: 0
preferred pool size: 0
initial pool size: 1
current pool size: 0
====== Pool end =====================
***** end *****
LdapPoolManager: using authmech: none
com.sun.jndi.ldap.pool.Pool@14693c7 {}.get(): ldap.openldap.org:389:plain:
=======

Hello Prakash,
Thanks for the reply
I am able to see the mail in SOST but when I click on the Display Document to see the content of the mail then I am getting this error of 'you are not connected to the internet'
My Program is to put the logo in my email body
I am sending you the attached image

How can i do to see the master and text values of the Key figure 0UNIT

Similar Messages

Maybe you are looking for