How can I downgrade from iTunes 10.5 to 10.4

How can I downgrade from iTunes 10.5 to 10.4?

Thanks for your support, but I changed the TimeZone (both PC and Iphone 3GS on Istanbul GMT+2) and the problem is still there. I updated also Itunes 10.5.1, same problem. I can't syncronize or update the IOS on the phone. I'm afraid I'll have to try the complete reset to factory of the Iphone (I'm afraid sync data on the iphone has been corrupted and Itunes can't sync).
Any advice on how to save all my data, since backup function does not work because it needs the sync feature?
thanks
Alessandro

Similar Messages

  • How can i downgrade from itunes 10.5.3 to 10.5.1

    Since upgrading from iTunes 10.5.2 to v.10.5.3 I have had problems with a stuttering or halting of sound, as if I were streaming music with a slow internet connection. How can I downgrade to the previous version?

    Very difficult.  I don't know about the version change you did but often versions may irreversibly upgrade the library file.  You would have to start from scratch unless you happen to have saved a previous copy of the file.
    Another problem is getting hold of an older version.  Unless you saved a copy of 10.5.2 you will likely find it no longer exists on Apple's web site.
    Did you clone your hard drive and do a complete backup before installing new software as is advisable?

  • How can i downgrade from iTunes 10.5 Beta 2 to iTunes 10.5 Beta 1?

    i have a iPhone on iOS 5.0 Beta 1 and iTunes on 10.5 beta 2 but i cant sync and when i install itunes 10.5 beta 1 it's not possible to start itunes
    what can i do?

    The info below corrects the mistake of upgrading to iTunes 10.5 Beta 2 before installing iOS 5.0 Beta 2 on your iDevice.
    To downgrade from iTunes 10.5 Beta 2 to iTunes 10.5 Beta 1 you need to trash the iTunes Application before running the Beta 1 installer. Otherwise the icon will just bounce once and the app won't run.
    Then once you are back on Beta 1 should should restore your iDevice to iOS 5 beta 2 (you can only use restore, upgrade doesn't work and throws error 3002) you then need to install iTunes beta 2 and then restore from your backup.

  • How can I downgrade from 11.0 and re-install 10.7

    How can I downgrade from 11.0 and re-install 10.7

    First, reconsider your decision. 11.x isn't quite as user-friendly as 10.x, but it has pretty much the same functions are before (albeit in different places). Give it a few more days, and you might grow to like it. Future releases will only get better.
    If you've made your decision, tap on this link:
    http://www.emacconsulting.com/apple/itunes/downgrade-itunes-11-to-itunes-10-7/

  • How do I "downgrade" from iTunes 10 to iTunes 9?

    How do I "downgrade" from iTunes 10 to iTunes 9 without having to uninstall and reload all of my music. The new iTunes 10 interface is hideous and bland. I can't stand looking at it anymore. iTunes 9 was much nicer. I have about 200 GB of music so i would really like to avoid having to add everything into a fresh/new library.

    you could try this: http://appletoolbox.com/2010/09/how-to-downgrade-itunes-10-to-itunes-9-2-1/.
    JGG

  • HT5731 How can i transfer from itunes store USA to australian store

    HOw can i transfer from itunes store USA to AustraliN store

    Change App Store
    1. Tap "Settings"
    2. Tap "iTunes & App Stores"
    3.Tap "View Apple ID"
    4. Enter your user name and password.
    5. Tap "Country/Region."
    6. Tap "Change Country/Region"
    7. Select the region where you are located.
    8. Tap "Done".

  • HT5622 I am living in New Caledonia, a French Territory. How can I purchase from iTunes (ex: USA, Australia) using my card, French Issued?

    I am living in New Caledonia, a French Territory. How can I purchase from iTunes (ex: USA, Australia) using my card, French Issued?

    You can only download content(other than podcast episodes) from a country's iTunes Store if you're in that country. For paid content, you also need to supply a payment method valid in that country.
    (85658)

  • How can i Downgrade from iOS 6 beta Firmware to iOS 5.1.1 iPhone 4 A4 . After I've upgraded my machine batteries run out very quickly, so I want to Downgrade, I don't have shsh blobs

    How can i Downgrade from iOS 6 beta Firmware to iOS 5.1.1 iPhone 4 A4 . After I've upgraded my machine batteries run out very quickly, so I want to Downgrade, I don't have shsh blobs

    There is no reason to be running beta software, I doubt it will even still run as iOS 6 has been officially released.  Or were you simply trying to be funny? 
    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • How do you downgrade from itunes 10 to itunes 9?

    Hi guys. I was wondering if there is a way to downgrade from itunes 10 to itunes 9. When I downloaded itunes 9 and tried to install it, it said that it couldn't install because there is a newer version of itunes already on my machine. Any help would be nice.

    You might want to look into this thread .How to safely downgrade from iTunes 10 to iTunes 9? (Mac OS 10.6.4)

  • I am using Iphone 5 ,How can i downgrade from IOS 7.0 to IOS 6 ?

    I am using Iphone 5 ,How can i downgrade from iOS 7.0 to iOS 6 ?

    Go to the Apple store and buy a new phone, the iPhone 5 (not the 5S) and you will probably get a phone with the IOS 6 interface.
    But be aware that many apps will no longer be offering updates for the older IOS. You either have to move forward and stay in the past.
    IOS 7 is just a change in the look, the functionality is still there. OSes have to move on, change. Otherwise the vendor gets accused of staying in the past. I find no problem in the update except for the changes in the Calendar. I spent $5.00 and got another calendar that does more and works better. I also got a better Notes program for a few bucks. For less than the cost of a dinner meal I was able to improve my phone experience. Rather than complain, I adapted. Problem solved.

  • How Can I Downgrade From 2.0?

    Well, the Phone 2.0 upgrade to my 1st gen iPhone has killed my WiFi and it's pretty glitchy with email and a few other things.
    How can I downgrade back to the previous version? Was it 1.4?
    I can't seem to find the right file and I would want to make sure it is the actual Apple file and not some sort of altered version.
    Thanks for the help, I'm leaving town for the weekend and don't want to be stranded with this 2.0.

    From what I've found it involves basically hacking the phone to some how trick iTunes into using 1.1.4, also requires an older version of itunes. I've heard the best chance is to tell apple your unhappy with 2.0 and they will give you another phone that still has 1.1.4 on it. Thats just what I've found on the internet, not official.

  • I live in Palestin, How can I purchase from iTunes ?

    Hello ,
    I live in Palestine and tried to buy from Itunes store, but I could not because my name is not in the list of states that Palestine with her ​​own key international.
    How can I purchase from the store using a credit card?
    What is the name the state that must be chosen?
    Goodbye.

    The state will most likely be Israel. Different countries accept different credit cards, and I cannot tell you what is acceptable in Israel.

  • How can i downgrade from os x 10.9 to 10.7 without time machine

    can i downgrade from os x 10.9 dirrectly to 10.7?

    You should start a new topic thread, so as to get more exposure
    to your question; this is suggested due to the status of where you
    posted your item (now answered) will see fewer people with any
    answer; mostly those seeking answers like their own question.
    If your MacBook Pro shipped with a system later than the
    DVD version OS X 10.6 you have, the disc would not work.
    However, if the DVD you have is the Original OS X version
    the MacBook Pro came with, you could use it in much the
    same way as it worked before installing Mavericks 10.9.x
    By 'reverting' to Snow Leopard 10.6.8 you will essentially lose all
    of the content on the hard disk drive. I am not certain if you could
    even import anything from a 'time machine' device that had been
    created under the newer Mavericks 10.9 system. Since you have
    to boot the computer with the install DVD for 10.6, and erase the
    hard disk drive, reformat it to GUID and HFS+ (whatever default
    for Snow Leopard) and that would remove the Recovery partition
    on the computer's hard disk drive, and any other partitions.
    Insert the Snow Leopard DVD into the optical drive, and restart
    while holding the C key down, until the Installer disc is running
    the computer; this would be rather slow, as it reads from the DVD
    in order to build the Installer desktop, and access files to attempt
    an installation. It may also be testing the hard disk drive, etc.
    Once the computer is booted from the SL 10.6 install DVD, you
    can look into the Utilities menu (in top of screen, like in Finder
    desktop) to choose Disk Utility from the drop-down menu, and
    once you launch Disk Utility, note there are sections within it
    to choose from. You can choose Secure Erase (single pass) if
    you want to have the utility overwrite zeros on the entire HDD.
    This a bit longer then a basic erase & install. It wipes everything.
    If not, choose to erase all Partitions and be sure it does this.
    Afterward you would need to be sure it reformats the hard drive
    with a correct partition map & file type. GUID & HFS+ journaled.
    The tools are in the Disk Utilty that you run prior to the Installer
    itself, as there are options in the menu just like Finder desktop.
    Once the hard drive is erased, partition mapped, & reformatted,
    it should be easy to put an all-new system 10.6 on the hard drive.
    (That is, if the OS X DVD you have is a retail version, and if your
    computer shipped with a system older than the one on that DVD.)
    Should you choose to, an idea some suggest prior to upgrade
    and also prior to downgrade, is to make a full clone of the system
    that is running the computer on an externally enclosed hard disk
    drive (see carbon copy cloner, or superduper, clone utilities) so
    as to have a complete running system that can boot the Mac...
    If you had one of these prior to upgrading to Mavericks, it would
    be able to run your computer without re-installing. You could just
    use the clone utility, again, to clone it back to the wiped Mac HD.
    Or run Snow Leopard from the external, at a slightly slower rate
    given the USB 2.0/3.0 to an external is slower than bus speed.
    Not sure if this helps. However you may benefit from more
    exposure to your question in a new topic thread, and that
    could be in Snow Leopard, Mavericks, or this ASC section.
    There are advantages to posting in an OS X named topic
    since people with all kinds of supported Mac would see it.
    Hopefully you can revert, and also have some kind of a way
    to make a backup of any works you may need a copy of.
    The applications in Snow Leopard, older than Mavericks,
    may not like to handle files made with newer software.
    Though there is a cost to set up the ability to make and use
    full bootable system clones, the external drive, time, learning
    and testing the idea to see if you can master it before erasure,
    the results are worth the effort; since you then have a backup.
    A full backup, and it is a manual effort to make this kind, unlike
    the 'time machine' bits and pieces, this can bring back the Mac;
    if used with a time machine backup, too, could be opportune.
    Good luck & happy computing!

  • How can I stream from iTunes (Win) to Apple TV (3. generation)?

    Home Sharing is turned on, but I can't see my iTunes library on my Apple TV, also I've no idea, how to stream from my MacBook or PC to the Apple TV. Firewall is offline during testing. Streaming photos and from iOS-devices works.

    What happens you you try?  Are you looking under Music or Computers > Music.  Have you entered in the home sharing ID you created in to ATV?

  • How Can I Unsubscribe from Itunes Plus?

    I purchased on song under the new Itunes Plus category. It has now turned the whole store over to this option only. I don't want to spend $1.29 for each song. How can I undo this choice and go back to my $.99 songs?

    1) Open iTunes and sign in to the iTunes Store, if necessary.
    2) From the Store menu at the top, choose View My Account, enter your password, and click View Account.
    3) On the Apple Account Information page, click the Manage iTunes Plus button. To disable iTunes Plus, deselect "Always show me iTunes Plus music and music videos when available."
    4) Save your changes.

Maybe you are looking for

  • I broke my ipod and got a new one now how do i transfer everything i had before on my ipod onto my new one?

    this guy at school chucked my ipod on the ground and the lcd broke so he gave me his so i have been trying for the last hour to transfer my stuff onto the new one concitering i have all my personal stuff on the other one that i would like to have on

  • Hidden files sent through Apple Mail

    Whenever I send attachments through Apple Mail, I get these 1KB files showing up in the attachment. For example, if I attached and sent a 1MB file called "photo1.jpg" through Apple Mail, my friends receive two files; 1 MB file called photo1.jpg and a

  • Burnt LED line in my LCD screen

    I have a burnt led line in my LCD screen on my Mid 2011 MacBook Pro, I found a place that sells the part (I understand Apple does not sell such at the Apple Stores in the US). My question to the community is, if I purchase the replacement LCD screen,

  • Url called from form question

    HELP! I created a form that allows the user to enter a number (SEATPLAN). The code below is executed on a custom PL/SQL button. It does not seem to work. The url generated runs fine typed directly into the url of a browser. But the called url from th

  • Can't save modified dpi in Preview.

    I am attempting to change the dpi of several images for my publisher, from 72 to 300 dpi. The Inspector box shows that I've made the change, until I go to save the change, and it reverts back to the 72 dpi. What am I doing wrong?