How can i duplicate a row in numbers

How do you duplicate a row in numbers?

Hi Rusty,
I worry that this may be a trick question, but here goes:
Click on the Row tab to select the entire row.
Command-C to Copy the Row to the Clipboard
Insert > Copied Rows
Or, did you have something else in mind?
Jerry

Similar Messages

How can I label my rows on numbers so I can keep a running count? Dave

How can I label my rows on numbers so I can keep a running count?
i would like to number from 1 to 150 by highlighting and use a function command
Dave
               Name               Address          Email
Ex      1
          2
          3
          4
          150

Add a column to the left of column A (it will become column A).
Assuming you want to start with the first "name" in Row 2 (and NOT number the header row):
Two methods:
1.
In cell A2, enter =ROW()-1
Grab the Fill Handle (small circle, bottom right of the selected cell) and drag down to fil the formula into the rest of the cells in the column.
If the formula is placed in ALL non-header row cells in the column, it will automatically fill into any rows added to the table.
If rows are inserted or removed, numbers below the inserted/removed row will be automatically adjusted.
2.
In cell A2, enter a 1
In cell A3, enter a 2
Select both cells.
Grab the Fill Handle and drag down to the rest of the cells in the column.
These are fixed numbers. They will not be automatically filled into new rows added to the table, nor will they automatically update when rows are inserted into the table or removed from the table.
To add more numbers, select the last two cells currently containing numbers, drag the Fill Handle down.
Regards,
Barry

How can I duplicate my current iCloud Numbers Spreadsheet while keeping the current one?

Hello, I spent quite sometime transforming one of the standard spreadsheets to meet my personal needs and I wouldn't like it to much if I have to do it again. So my point is, it there a way I can duplicate it without recreating it while saving my current one?

In Numbers:
File>Duplicate.
Then save the duplicate wherever you want to.

How do I add multiple rows in Numbers for iPad?

how do I add multiple rows in Numbers for iPad?

Hi James,
On the iPod I can only insert what is on the clipboard but I can insert however many rows I have there. Is it working differently for you? Benjoon seemed to think that he could not do this in Numbers. He was ruling Numbers out because of it. He doesn't need to do that because of this issue.
If I was needing to insert multiple blank rows often I might keep a table of blank rows or just some blank rows at the end of the working table that I could copy/paste. This is no different than Numbers on the Mac.
quinn

How do I automatically number rows in Numbers for iPad?

How do I automatically number rows in Numbers for iPad?

Hi James,
On the iPod I can only insert what is on the clipboard but I can insert however many rows I have there. Is it working differently for you? Benjoon seemed to think that he could not do this in Numbers. He was ruling Numbers out because of it. He doesn't need to do that because of this issue.
If I was needing to insert multiple blank rows often I might keep a table of blank rows or just some blank rows at the end of the working table that I could copy/paste. This is no different than Numbers on the Mac.
quinn

How can I print address labels from numbers spread sheet

How can I print address labels from numbers spread sheet

CAB,
The 5163 template has the following dimensional specs:
Dimensions & Info
Length: 4.00000"          Height: 2.00000"
Top Margin: 0.50000"          Bottom Margin: 0.50000"
Left Margin: 0.18000"          Right Margin: 0.18000"
Hor. Spacing (gutter): 0.14000"          Vert. Spacing (gutter): 0.00000"
Intended Use: Mailing Labels, Shipping Labels, Address Labels
There's a great vendor site with this data readily available, better than the Avery site in my opinion. But, you can get the same info in the Contacts Print dialog pane.
You can grab a template matching these dimensions from that vendor site, Copy the table after opening the Word Template in Pages and drop the into a blank Numbers Sheet.
I found that Sheet side margins of 0.15" worked better than 0.18. For some reason the table wanted to flow to the next page to the right with 0.18". Turning off the Headers and Footers and setting Top and Bottom Margins to 0.5" worked well. These adjustments are made in the Sheets Inspector.
So, that will put the template you specified into a Numbers document and you can print labels properly aligned from there. Since your problem statement is a bit lacking in detail, that's all I can offer you at this point.
Jerry

How can I print sheet titles from Numbers?

how can I print sheet titles from Numbers?

Hi Rick,
"Believe it or not, Numbers just doesn't work as well for me as Excel."
I don't find that difficult to believe. If you need the functions supported by Excel and not by Numbers, then Excel is the tool to use. OTOH, your finding of 'more flexible' translates, at least in part to 'more familiar.' All applications, Excel included, force you into certain paths.
Regards,
Barry

How can I use multiple row insert or update into DB in JSP?

Hi all,
pls help for my question.
"How can I use multiple rows insert or update into DB in JSP?"
I mean I will insert or update the multiple records like grid component. All the data I enter will go into the DB.
With thanks,

That isn't true. Different SQL databases have
different capabilities and use different syntax, That's true - every database has its own quirks and extensions. No disagreement there. But they all follow ANSI SQL for CRUD operations. Since the OP said they wanted to do INSERTs and UPDATEs in batches, I assumed that ANSI SQL was sufficient.
I'd argue that it's best to use ANSI SQL as much as possible, especially if you want your JDBC code to be portable between databases.
and there are also a lot of different ways of talking to
SQL databases that are possible in JSP, from using
plain old java.sql.* in scriptlets to using the
jstlsql taglib. I've done maintenance on both, and
they are as different as night and day.Right, because you don't maintain JSP and Java classes the same way. No news there. Both java.sql and JSTL sql taglib are both based on SQL and JDBC. Same difference, except that one uses tags and the other doesn't. Both are Java JDBC code in the end.
Well, sure. As long as you only want to update rows
with the same value in column 2. I had the impression
he wanted to update a whole table. If he only meant
update all rows with the same value in a given column
with the same value, that's trivial. All updates do
that. But as far as I know there's know way to update
more than one row where the values are different.I used this as an example to demonstrate that it's possible to UPDATE more than one row at a time. If I have 1,000 rows, and each one is a separate UPDATE statement that's unique from all the others, I guess I'd have to write 1,000 UPDATE statements. It's possible to have them all either succeed or fail as a single unit of work. I'm pointing out transaction, because they weren't coming up in the discussion.
Unless you're using MySQL, for instance. I only have
experience with MySQL and M$ SQL Server, so I don't
know what PostgreSQL, Oracle, Sybase, DB2 and all the
rest are capable of, but I know for sure that MySQL
can insert multiple rows while SQL Server can't (or at
least I've never seen the syntax for doing it if it
does).Right, but this syntax seems to be specific to MySQL The moment you use it, you're locked into MySQL. There are other ways to accomplish the same thing with ANSI SQL.
Don't assume that all SQL databases are the same.
They're not, and it can really screw you up badly if
you assume you can deploy a project you've developed
with one database in an environment where you have to
use a different one. Even different versions of the
same database can have huge differences. I recommend
you get a copy of the O'Reilly book, SQL in a
Nutshell. It covers the most common DBMSes and does a
good job of pointing out the differences.Yes, I understand that.
It's funny that you're telling me not to assume that all SQL databases are the same. You're the one who's proposing that the OP use a MySQL-specific extension.
I haven't looked at the MySQL docs to find out how the syntax you're suggesting works. What if one value set INSERT succeeds and the next one fails? Does MySQL roll back the successful INSERT? Is the unit of work under the JDBC driver's control with autoCommit?
The OP is free to follow your suggestion. I'm pointing out that there are transactions for units of work and ANSI SQL ways to accomplish the same thing.

How can I have 2 versions of Numbers but only 1 app? Read

This is the weirdest thing I ever saw. It's driving me crazy and making me look like fool.
In an earlier post I mentioned that something happened to my numbers. The window looked very different from this afternoon when I created 2 new spread-sheets. I must have sounded crazy to qinn below in my answer.
Now I clicked the Numbers icon in the dock and it opened to my original Numbers 09 (2.3). So I tried to open a sheet I created a few hours ago and it says I can't open that file, I need a later version of Numbers. OMG
Just a though so I opened the finder, went to the applications folder and I only have ONE Numbers.app. So I clicked on that and low-and-behold the new 3.2.2 opened!!!!!!!
How can I have 2 versions of numbers but only one app???? I thought I was going crazy. Now I know something isn't right.
HELP PLEASE!!!
Allen

Hi Allen,
Look in your Applications folder for an other folder "iWork '09".
Breathe.
Know that you are not alone. Wayne made a user tip and it is not just for you.
Need newer version of Numbers to open file
quinn

How can I add a row into a JTable with JButton

Hi all. I have the following code:
package gui;
import db.*;
import javax.swing.table.AbstractTableModel;
import java.util.ArrayList;
public class FoundersTable extends AbstractTableModel{
    private static final int COLUMNS = 8;
    private String columnNames[] = {"�� ", "��", "��", "��", "��", "��",
            "�� ", "�� , ��"};
    private ArrayList data;
    public FoundersTable(){
        data = new ArrayList();
    public int getRowCount() {
        return data.size();
    public int getColumnCount() {
        return columnNames.length;
    public String getColumnName(int colIndex) {
        return columnNames[colIndex];
    public Object getValueAt(int rowIndex, int columnIndex) {
        return ((ArrayList)data.get(rowIndex)).get(columnIndex);
    public void setValueAt(Object value, int rowIndex, int columnIndex) {
        ((ArrayList)data.get(rowIndex)).set(columnIndex, value);
        fireTableCellUpdated(rowIndex, columnIndex);
    public void addRow(ArrayList neueZeile) {
        data.add(neueZeile);
        int index = data.size() - 1;
        fireTableRowsInserted(index, index);
    public void removeRow(int index) {
        data.remove(index);
        fireTableRowsDeleted(index, index);
    public void removeAllRows() {
        data.clear();
        fireTableRowsDeleted(0, 0);
    public boolean isCellEditable(int rowIndex, int columnIndex) {
        return true;
}Now in my MainJFrame class I have one button for additing and one button for removing a selected row. How can I add/remove rows with this two buttons.
Thanks

No my question is how can I add and remove rows WITH buttons My point was the code is the same. You use the addRow(...) method. Why did you write an addRow(...) method if you aren't going to use it?
I don't understand your problem. Do you not know how to write an ActionListener?

How can I duplicate a control in a subVI using the reference?

Here's what I want to do. I have a tree control in my main application. I add and delete items dynamically based on user input. If I pass my tree reference to a subVI, I can add, subtract and reorder the items in the tree and the changes are shown on the main tree. How can I duplicate the tree in the subVI? Would I simply pass the tree control in (which I'd rather not do) or is there some other way to accomplish this?
Thanks in advance for any help.
Gary

Here's my attempt. This VI uses a control reference of the old tree and generates a data structure that can be used by the "Edit Tree Items.Add Multiple Items to End" method to add contents to the new tree that should be identical to the contents of the original tree. Note that this VI only works with LabVIEW 8.0 and later, since the afore-mentioned method is not available in previous versions.
I hope this helps...also note that I saw some re-draw issues with LabVIEW 8.0, i.e. after the VI ran, I didn't see the tree displayed properly until I minimized/restored the window, or dragged another window over it. I did not see the redraw issues in LabVIEW 8.2.
-D
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman
Attachments:
Duplicate Tree.vi ‏21 KB

How can I move address book to numbers/excel?

How can I move address book to numbers/excel? I tried to follow the instructions from a not-too-recent forum, but am not getting the same results. Help!

Alas, the process doesn't transfer every datas.
(1) Custom fields aren't passed
(2) Due to localization oddities, even some standard fields aren't passed.
Yvan KOENIG (VALLAURIS, France) mercredi 22 février 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.3
My Box account is : http://www.box.com/s/00qnssoyeq2xvc22ra4k

Can anybody help me how can I get a 1000 contact numbers in an excel spreadsheet into Blackberry

Can anybody help me I have just purchased a Blackberry curve 8900 and I want to know how can I get a 1000 contact numbers in an excel spreadsheet or note pad file into my phone, is there anyway of transferring the numbers across rather than me having to do it manually one by one, thanks
Solved!
Go to Solution.

Hi and welcome to the forums!
Origami?
You can transfer the excel spreadsheet in to a .csv file and import to Outlook.
Or use desktop manager (see link below)
Do you have these numbers on another device?
What version of Windows, Outlook, desktop manager etc. are you using?
Thanks,
Bifocals
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB11194&sliceId=2&docTy...
Message Edited by Bifocals on 06-02-2009 06:19 AM
Message Edited by Bifocals on 06-02-2009 06:59 AM
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

How can i hightlight in excel 3 numbers in a column then skip one, and highlight the next?

how can i hightlight in excel 3 numbers in a column then skip one, and highlight the next?
Example: Column A
highlight      3
highlight      4
highlight      5
skip            6
highlight      7

hold down the cmd (⌘) key while selecting them.

How can we view the error message numbers in the web ui?

Dear all,
How can we view the error message numbers in the web ui? It gives the error but no number. It is possible to debug in web UI so how can we accomplish this?
Thanks,
FK

Hi Fakhan,
You can absolutely do that.
Check the class: CL_BSP_MESSAGES
Also if you want to find out the exact Message Class and Message Number, go to table T100, type text in field TEXT, you will get Message Class and Message number in fields ARBGB and MSGNR respectively.
I hope this helps.
THanks
Vishal

How can i duplicate a row in numbers

Similar Messages

Maybe you are looking for