How can i dynamically varie the location and number of major grids in XY graph.

Hi All,
    I'm supposed to plot some statistics in X-Y graph with x-axis scaled on time stamps. The plot generated has only one  major grid. Can I have a control over the location and number of major grids dynamically?
Thanks,
Saravanan.T 

Hi Saravanan,
use a property node "X scale.Range.Increment" to set the spacing of the major grid...
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Similar Messages

  • How can I get iTunes to locate and play all my music files?

    How can I get iTunes to locate and play all my music files?

    I have this problem too. I am researching now. Here is what I know so far. If you right click a song then get ifo the it will say Protected AAC or purchased AAC. Protected wont play on sonos, purchased will play on sonos. It seems that all my protected were purchased 2005 to 2009 or so. I am trying to find out if apply will convert these for a small dfee or if I use the itunes cloud these tunes will convert for me. downloading and reloading is not an option for me. Pretty much a money grab by apple either way. I am sure Steve is smiling.

  • How can I print with the black and white cartridge only?

    I am trying to print using the black and white cartridge only because magenta is out of ink but I'm getting the following error message in HP Photosmart C7200 series print dialog:
    The printer is out of ink.
    The following ink cartridges are empty: Magenta. Replace these ink cartridges to resume printing.
    How can I print with the black and white cartridge only?
    Mac OSX 10.7.3
    HP Photosmart C7280 (7200 series)
    This question was solved.
    View Solution.

    I am absolutely disgusted by this; clearly a scam from HP to make more money by selling extra ink cartridges!!  I will make sure to never buy any products from the shoddy rip off merchants at HP ever again!!
    You should be ashamed!!

  • How can i find out the resolution and accuracy of PXI-6602 module?

    I have a 32 bit  8 channel PXI-6602 counter module.  PXI card is interfaced to PC with MXI-4 link. How can i find out the resolution and accuracy of this system.What is the maximum accuracy and resolution i will get from this system. Because optical signal to cmos conversion signal is given as a input to the counter.

    Hi chandhu,
    Were you referring to the accuracy of the count register or the timing clock? 
    PXI-6602 specifications can be found in the NI 660x Specifications.  The resolution of the count register is, as you’ve noted, 32 bits.  This corresponds to a maximum count value of 4,294,967,295.  As long as all of the edges are in accordance with TTL specifications, the accuracy of the count register is 100%.
    On the other hand, the PXI-6602 baseclock accuracy takes on the baseclock accuracy of the PXI CLK 10 signal.  Again, this is all found in the specifications.
    You may also want to check out the NI 660x User Manual – it contains a lot of details on the operation of these counter/timer devices.
    I hope this helps.  Please post back if you have further questions.
    Ed W.
    Applications Engineer
    National Instruments

  • HT1349 How can i find out the size and length of my playlist?

    How can i find out the size and length of my playlist? Anybody?

    It shows up in iTunes on your computer as seen here:

  • HT4972 i have iphone 3gs v 4,2.1 i want to upgrade to ios 5 i will erase all data, how can i install again the software, and now my device can not detect to my computer? what can i do? please help me..

    have iphone 3gs v 4,2.1 i want to upgrade to ios 5 i will erase all data, how can i install again the software, and now my device can not  be detect to my computer? what can i do? please help me..

    You can not install iOS 5. It is no longer signed by Apple. You can only install the current version of iOS. For a 3GS, that's 6.1.3.
    However... if you have 4.2.1 on your phone, odds are it is not a 3GS, it is a 3G. If that's the case, you've reached the end of the road for that. It can not run anything higher than 4.2.1.

  • How can I distinguish between the first and the rest in Smartforms??

    I have made an Invoice in Smartform. I have to take three copies of that. In the first copy it will be printed "ORGINAL INVOICE" and in the next copies it will print "Duplicate copy".  How can I distinguish between the first and the rest in Smartforms??
    Regards,
    Subhasish

    >
    Subhasish Ganguly wrote:
    > I have made an Invoice in Smartform. I have to take three copies of that. In the first copy it will be printed "ORGINAL INVOICE" and in the next copies it will print "Duplicate copy".  How can I distinguish between the first and the rest in Smartforms??
    Hello Vamshi,
    As per the OP's requirement he has to print 3 copies of the invoice. Which according to my understanding should be printed at the same time ? May be i am wrong in interpreting this.
    You must be knowing you can control the print params of the SmartForms in CONTROL_PARAMETERS where you set the NO_DIALOG & in the OUTPUT_OPTIONS pass the number of copies.
    I think the solution you have proposed the "Original Copy" will be printed only once. (Correct me if i am wrong)
    Every time the user prints the invoice again he will be getting a "Duplicate Copy". If this is what the OP wants the logic is perfect
    Cheers,
    SUhas

  • I have a hand me down iphone 3, how can i erase all the data and pictures from it?

    i have an iphone 3gs from my son, how can i erase all his data and photos from the phone so I can start transfering my own and use it

    Restore as New  >  http://support.apple.com/kb/HT1414

  • When sending e-mails, how can I show only the name and not include the e-mail address?

    When sending e-mails, how can I show only the name of the recipient and not include their full e-mail address?

    Hi beverlyfromnull,
    Have you added the recipients to your address book?

  • How can I re-run the SMC and EFI driver updaters ?

    When I bought my iMac Intel 20" in mid-2006, I immediately had a problem with the video driver when the computer woke up from sleep : the screen was badly flickering.
    After lengthy talks with Apple, I was sent two updaters (one for the SMC and one for EFI) which solved the problem. Just to make sure, I deactivated completely the energy saver.
    No problem for two years and a half.
    Last night, for a reason unknown to me, the computer went into sleep mode and when it woke up, the whole screen was flickering and had vertical lines in it, despite having up-to-date SMC and EFI drivers.
    Assuming that they had been corrupted, I wanted to re-run the updaters. But the computer refuses, saying that it is not needed.
    So, my question is "HOW CAN I FORCE A RE-RUN" OF THE SMC AND EFI UPDATERS ?"
    I have tried everything else, resetting the PRAM, resetting the SMC, tinkering with the monitor settings. But nothing works.
    I believe that running again the updaters is the only possibility left, but they are up-to-date
    Here is a summary of the iMac system info :
    iMac (20-inch, Early 2006) IM41.0055.B08 (EFI 1.1) 1.1f5 (SMC 1.0).
    Many thanks in advance for any suggestions
    Patrice
    PS : I have tried to contact the "experts" at Apple Support but, because my machine is two years old, they want me to buy time to ask this question from them, despite the fact that the problem stems clearly from a faulty design at the beginning of the iMac life, and that the knowledge base says that there is no unresolved issue presently with this model !
    Well, the problem is still there after two years and I only avoided it by deactivating the energy saver.
    But Apple never mentioned how to force running an updater if the machine does not want to ...

    You can restore a backup only by using the iOS Setup Assistant.
    iOS: Back up and restore your iOS device with iCloud or iTunes

  • How can I permanently change the location tab on the side bar? Every time I change, the next time I log on, it reverts to the "old" location.

    On the left hand side of the screen is a location tab. For some unknown reason this is set to a location I have never lived at. It is set for Brighton, UK.
    I would like to change it to where I live and I can do this but when I log off, it does not remember the new location and reverts to Brighton UK the next time I log on.
    Not a major inconvienience I agree but it would be nice to get information which relates to where I live and not some other UK location.

    There are two ways to use iTunes with an external drive, one is to relocate the media folder to a folder on the external, leaving the library files on your internal drive, the other (not advertised in support docs) is to move the entire iTunes folder to the external drive and connect iTunes to the new location. You chose the first method, which works fine until you forget to turn on the drive before you start iTunes.
    If your external media folder is called \iTunes\iTunes Media then process is relatively easy. Copy the contents of the iTunes folder on your internal disk into \iTunes on the external, then hold down shift as you start iTunes and choose the iTunes library on your external drive.
    If you external media folder has a different path or name then a few more steps are involved.
    Consolidate your library before you start just in case the are any files outside of the designated iTunes Media folder.
    Copy the contents of the iTunes folder into the parent folder of the media folder.
    Connect iTunes to the library on the external with the shift-start-iTunes method.
    Close iTunes and rename the media folder as iTunes Media, then start iTunes, check a track or two, then close it again. (Skip this stage if the folder already has the correct name)
    Rename/move the parent folder as \iTunes (or create a new folder at \iTunes and move the iTunes library files, Album Artwork & iTunes Media folders into it) then reconnect iTunes to the library with the shift-start-iTunes method.
    If you should now start iTunes without the external drive connected, iTunes will warn you that it cannot find the library and prompt you to choose or create one. Simply cancel, connect the drive, and restart.
    tt2

  • How can I turn on the Location service of my iPad 2 32 GB?

    I just bought an iPad 2 and iPhone 4 yestersday.
    I want to turn on the location services on my iPad 2 32 GB. When I go to settings > Location Services, I saw it was off then i tried to turn it on, but however, the on and off slide is grey.... that means I cannot slide the location services from off to on.
    What can I do then?
    I check already , the internet connection is fine.
    I try with my iPhone 4 with the same network same place.....but it works properly.
    Anyone experiencing the same problem with me?
    Any solutions?

    Are you sure your iPad has an active wifi connection when you're trying to use location services?  If it is connected, then go to Settings>General>Reset>Reset network settings. If that fails then try rebooting the device by pressing and holding the on/off and home buttons simultaneously until the screen goes blank and you see the apple logo. It should take about 10-15 seconds to reboot.

  • How can I save ONLY the bookmarks and extensions

    I am about to do a clean reinstall of Firefox. I want to save ONLY the Bookmarks and Extensions and NOTHING ELSE from the Firefox Profile. How can I do this please?
    Thank you,

    Both answers combined to help solve the problem. It would be good if more than one answer can be selected as "Chosen Solutions", because this situation occurs often in forums.
    Thank you to both of you!
    Kind regards.

  • [F8] Tree Component: How can I hide/remove the scrollbar and border?

    I'm using the Tree Component in my Flash 8 Pro - Project. I'm
    trying to customize the look of the Tree component in two ways:
    1. Is there any way to remove the scrollbar from the Tree
    Component?
    2. Can I also remove the Border from the Tree Component?
    I checked the Component Inspector and couldn't find any
    options for the scrollbar nor the border.
    Does anyone know how to do this or could you point me in the
    right direction?
    Thanks

    You can use the Status-4-Evar extension to replace some functionality that was lost withthe removal of the Status bar in Firefox 4.
    Open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout" after you have installed the Status-4-Evar extension and drag the items (Status Text, Progress Meter, Download Status) upon the Add-ons Bar (View > Toolbars > [X] Add-on Bar)
    * Status-4-Evar: https://addons.mozilla.org/firefox/addon/235283/

  • How can I make auto the continue and come from?

    Hi:
    Please sorry my grammar. I try to explain better as I can.
    Let's see. I have included some internal links such as "continued on page XX" and "comes from page XX" for some items. The problem is that as I add artwork or text, the number of pages varies, and so I have to edit the "continue" and "comes from" manually. Is there any way that InDesign assign the number of pages automatically? I mean, for example, when I indicate to a text box where you should continue (usually another text box), just that I do but whith the page number of the expressions "continue" and "comes from".
    I hope that I explain it well.
    Regards from Lima, Perú

    In English, these are called Jump Lines. If you already have a text frame that reads: continued on page XX, delete the XX, place the cursor after continued on page and go to Type>Insert Special Character>Markers>Next Page Number. Do the same with the continued from page XX, but use Type>Insert Special Character>Markers>Previous Page Number.
    If you have a story that spans two or more text frames, placing a jump line frame so that it touches one of the  frames of a threadded story, it will display either the page number of the previous or next frame in the thread.

Maybe you are looking for