How can I easily delete unwanted system language files?

There are a bunch of files - some unneeded language files - that take up space on the drive. Is there some easy way to delete those that I will never use?

Why do you want to do that? That is not a good idea. They do not take up much space. If you are running out of HDD space look for something else to get rid of.

Similar Messages

How can I easily delete duplicate photos- it appears several events have duplicate photos

how can I easily delete duplicate photos from events- it appears several events are dupicated

I am responding to your reply to davidfrommonterey (Jul9,2011). To quote: "If these are seen in iPhoto it would be good to figure out how they got there since it is typical that iPhoto will not import duplicates.
LarryHN wrote:
If these are seen in iPhoto it would be good to figure out how they got there since it is typical that iPhoto will not import duplicates
Duplicate annihilator is a good tool for finding duplicates - http://www.brattoo.com/propaganda/
If you are seeing them in the finder then don't - you should never go into the iPhoto library using the finder
LN
I have a similar problem. My point is my photos are not importing as duplicates, they are duplicating and moving from one album to another, sometimes bumping the contents of said folder to another location. I cannot find a logical explanation. I tried the trial version of Duplicate Annihilator, but that was a bust since it could locate only five (5) dups. Any suggestions? BRENDA Sfrom Charleston

I have imported over 7000 photos from my Dell desktop. How can I easily delete duplicates without trying to find them?

I have imported over 7000 photos from Dell desktop. Many were duplicated in the transfer. How can I easily find and elete thes photos without trying to find them one at a time?

Yes. Use Duplicate Annihilator or iPhoto Applescript to Remove Duplicates.
OT

How can I easily delete duplicate files in old Time Machine archives?

I have multiple older Time Machine archives from different Macs that I have been going through manually and picking files out and copying them to another drive file by file. I'm running into massive quantities of duplicate files and the biggest problem is muliple iphoto pictures including the same picture in different sizes.
I wanted to give up and just throw the whole Time Machine archive onto another disk so I could format the one it was on and use it for something else. But I got a message reading, "The backup can’t be copied because the backup volume doesn’t have ownership enabled." So I went to manually copy each "Macintosh HD" folder for each date into it's their own respective folders. It worked but required my password for each folder and each of the 19 folders were all ~75GB. Which is impossible because all of that data was on a 500GB drive.
What should I do? This has become a two month long nightmare.

I really don't know exactly, but since no one else has a answer I'll give it a shot.
I don't know much about TimeMachine at all, however I did assist someone that their TM was corrupted and they needed to salvage what they could off the drive, so I'll start with that.
There is software called Data Rescue and it's designed to read the 1's and 0's of any data on the drive, deleted or not, regardless of the file structure, and output the results to another drive.
TimeMachine tries to save space, so it uses what appears to be duplicate files, but contain no data as they are placemarks for files in later states that went unchanged from the previous states.
If Data Rescue has the option of recovering files independently of the file/folder structure this would result in all your files from the recoved TM drive being on all one level on the second drive.
From that second drive one could run software called DeCloner, which would flag the actual duplicate files of content, not just by name.
The next stage perhaps would be to eliminate files with no data, the placeholders, using the Finder "size" as a sorting option.
Saving all this remaining content to another drive to work on further, perhaps all the remaining image files can be seperated, sorted according to largest size, the largest ones (usually the ones you want to keep as they contain more quality) and opened into iPhoto or Aperture for further refinement as you add a small batches of smaller image sizes in to compare with the larger versions for duplicates/unwanted sizes.

How can you EASILY delete duplicate entries

For some reason, I have duplicate entries of most everyone on my iPhone 5S - is there an easy way to delete these instead of going into each duplication and scrolling to the bottom to delete????

I am responding to your reply to davidfrommonterey (Jul9,2011). To quote: "If these are seen in iPhoto it would be good to figure out how they got there since it is typical that iPhoto will not import duplicates.
LarryHN wrote:
If these are seen in iPhoto it would be good to figure out how they got there since it is typical that iPhoto will not import duplicates
Duplicate annihilator is a good tool for finding duplicates - http://www.brattoo.com/propaganda/
If you are seeing them in the finder then don't - you should never go into the iPhoto library using the finder
LN
I have a similar problem. My point is my photos are not importing as duplicates, they are duplicating and moving from one album to another, sometimes bumping the contents of said folder to another location. I cannot find a logical explanation. I tried the trial version of Duplicate Annihilator, but that was a bust since it could locate only five (5) dups. Any suggestions? BRENDA Sfrom Charleston

How can I easily sync and share pdf files between my laptop and iPad?

I frequently download pdf documents on my laptop, from websites, emails, etc, and would like to drop them into a folder which then syncs with my iPad so that I can read them later. Is there a way to do this, an app, etc, so that the iPad could access the documents. I expect this to either be an on-the-air automatic synch or a Cloud based solution where both laptop and iPad synch to the cloud folder.

Hi lenpan,
I use Dropbox and it works great. Its a cloud solution so while your iPad doesn't automatically "sync" it can always read from the cloud and you can set files to be available offline.
First sign up for a free Dropbox account from your computer.
Then, download the free Dropbox app on your iPad.
You can then set up a folder on your computer to drag your documents to. This folder syncs with the Dropbox server. The Dropbox app on your iPad can read from your account on Dropbox so you have access to everything that you dragged from your computer to Dropbox. You can also set files on your iPad to be available offline.
Hope this answers your question!
~Joe

I am trying to sync music from my iTunes library on my iMac to my iPhone. I only want selected music but I'm getting unwanted songs. How can I delete those songs on my iPhone or how can I prevent these unwanted songs that have not been selected from appea

I am trying to sync music from my iTunes library on my iMac to my iPhone. I only want selected music but I'm getting unwanted songs. How can I delete those songs on my iPhone or how can I prevent these unwanted songs that have not been selected from appearing on my iPhone? Help!

http://support.apple.com/kb/HT1296

How can i solve "could not load language and text preference "

how can i solve " could not load language and text preference ".. help everyone...

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

How can I change my auto-correction language from english to french?

My system language is english, so all the default language is also in english
but how can I change the auto-correction language from english to french and without changing the menu language?
Message was edited by: Marixomia

It's just, I want to change my spelling checker from english to french, that when I type some words in wrong order or miss some, I can know that.
For now, when I type in french, almost every words are underlined by the red lines...

In Aperture 3, how can I easily move entire projects out of my main Ap Library into other libraries? My Ap library is running super slow because it's overloaded l so I have created two new libraries, but can't seem to move the projects into them

In Aperture 3, how can I easily move entire projects out of my main Ap Library into other libraries? My Ap library is running super slow because it's overloaded, so I have created two new libraries, but can't seem to move the projects into them?

Hello Annabel,
To move entire projects export them as Aperture Libraries, and then import those Libraries into the other Aperture Library:
Select the Project in the Inspector, then
File -> Export -> Project as Library
In the other Library do:
File -> Import -> Library/ Project
But I am not quite convinced, that the size of your current Aperture Library is responsible for the slowness of Aperture - Aperture is designed to cope with huge libraries.
You may want to post your hardware setup and details of your library, and some of the hardware experts here may help you to find the reason for the slowness.
A huge library should only be a problem, if the projects are too big, and if you have many, many smart albums at the root level of your library.
So keep the projects small, and try to move some of your smart albums to lower levels in your folder structure (then Aperture does not need to scan all of your images to build the smart album).
Other reasons for Aperture's slowness may be, e.g.
An overfull system drive and/or external drive (keep at least 20% of your drives empty)
lack of RAM
a corrupted Aperture Library, that needs repairing
Have you checked those options, before you split your library? It would be a pity to split it, for you would loose the ability to browse all parts at the same time, to use all your images in the Media Browser, etc.
Regards
Léonie

How can I easily remove a group of photos from my iPad

how can I easily remove a group of photos from my iPad?

Iif the photos were synced to the iPad they can only be removed by connecting to iTunes on your computer, unselecting the photos folder that you synced to the iPad and then follow that with a sync.
IF the photos are in the camera roll, open the camera roll album, tap the as select button in the upper right corner, tap on each photo that you want to delete in order to select them and then tap the trash can icon.

How can I filter or block foreign language emails or email addresses

How can I filter or block foreign language emails or email addresses??
TIA
C

Most email clients have a provision to create a 'rule'. The rule examines the email as it is received. In generally you can search for specifically senders, recipients,subjects, or specific content words in the body. Based upon the findings of the rule, you can do something with the email (such as end it directly to the Trash).
For example if you know where all of valid you emails come from, you can create a rule that checks the from field for an acceptable sender and sends those email's that to the inbox, while sending all emails from other senders to the trash or spam folder
Keeping out foreign language emails is often difficult because because often it is difficult to come up with a rule that will catch them on the basis of language they are written in.
There are also commercial products that can scan incoming email and 'score' the email based upon content, and you decide at what 'score' you want the mail sent straight to the trash or spam folder. Verizon's spam filter does this based upon Verizon's scoring system, and actually does catch a lot of spam. It also occaisonally catches things that are not spam however....
Hope that is helpful

I had Iphoto 08 and now is gone, I have under applications and is not there. Also most of the pictures are gone. Can you easily delete the application?

I had Iphoto 08 and now is gone, I have looked under applications and is not there. Also most of the pictures are gone. Can you easily delete the application?

Obviously you can.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List.

How do I permanently delete unwanted purchased books from my ibooks and applied?

How do I permanently delete unwanted purchases from my ibooks/ Apple ID?

You can't permanetly delete any item from your purchase history, all you can do is hide them via your computer's iTunes so that they don't show in the Purchased links for redownloading : http://support.apple.com/kb/HT4919
You can delete downloaded ibooks from the bookshelf in the iBooks app on your device via the Edit button at the top of the bookshelf

How Can I Restore Deleted Query?

Hi, gurus.
Can anybody tell me How Can I Restore Deleted Query?
Help me plz.

If it has only been deleted from the role and not the object completely then it could still be found within infoareas in Bex, if the object has been deleted completely you could re-transport the query from the development system assuming it was created her in the first instance.
I'm not sure if you can retrieve the query any other way, i do know there are procedures for workbook retrieval but for querys im not certain.

How can I easily delete unwanted system language files?

Similar Messages

Maybe you are looking for