How can I easily take clips burned using a Sony VRD MC3 Unit?

When I burn clips using the Sony VRD MC3, the clips will play on my computer but the finder does not show any files on the DVD. I think Sony creates it that way.
I was able to copy by creating a dmg image on the desktop and then burning to a new DVD. However, it would not be recognized by the DVD player on my macbook Pro like the original that came out of the VRD MC3. Any suggestions?
Thanks,
Skip

Is there anyone out there who can help me with this?

Similar Messages

After burning a successful DVD in iDVD out of FCPX, how can I see the settings it used? So I finally burned a DVD out of a Apple Pro Res file into iDVD in PAL format. My question now is how can I find out what the exact burn properties were so that I ca

After burning a successful DVD in iDVD out of FCPX, how can I see the settings it used?
So I finally burned a DVD out of a Apple Pro Res file into iDVD in PAL format. My question now is how can I find out what the exact burn properties were so that I can apply the same burn properties to a project in Compressor 4?
Is it possible to see what iDVD did?

I don't know any way you can interrogate iDVD to reveal settings to the extent that you can in a Compressor project. What you could do is open up the show's VOB in MPEG STreamclip, go to File and Reveal Stream Information; that will at least give you some rudimentary info like average bit rate. Perhaps someone, with more iDVD experience, can chime in here.
The broader question is why use Compressor at all if your current workflow is doing the job to your satisfaction?
The value of Compressor is that it gives you control over the many parameters that affect size quality. and playability. The Compressor presets can give you a starting point for DVD delivery, Web, etc. From those presets, people typically experiment by adjusting the parameters until they get the desired results for their specific show. It's a little bit science and a little bit art. After experimenting, you may be able to get slightly better quality for the project you've successfully burned in iDVD by using Compressor and something likeToast…or maybe not.
Good luck.
Russ

I'm currently using a pc running windows xp which is no longer supported. how can I easily move my iTunes library to a PC running Windows 8.1

I'm currently using a pc running windows xp which is no longer supported. how can I easily move my iTunes library to a PC running Windows 8.1

Yes. For how:
How to move your iTunes library to a new computer - Apple Support

How can I get Firefox to NOT use DDE? If I uncheck it in Windows XP "Folder options" it keeps getting re-checked. When checked, it takes minutes to get Firefox to open on a page linked from Outlook.

How can I get Firefox to NOT use DDE? If I uncheck it in Windows XP "Folder options" it keeps getting re-checked. When checked, it takes minutes to get Firefox to open on a page linked from Outlook.

Open link/bookmark in new tab in same window:
*Middle-click (press the mouse scroll wheel) the link
*Ctrl+left click the link
*right-click the link, choose "Open Link in New Tab"
Open link/bookmark in new window:
* Shift+Enter on the link
* Shift+left click on the link
See: http://www.7is7.com/software/firefox/shortcuts.html

When using Facebook how can I easily insert my Emjoi emoticons into my posts

When using Facebook how can I easily insert my Emjoi application emoticons into my posts? I have a few emoticons in my message area " appears when keyboard & add picture is displayed"...but, I don't see and Cannot insert more emoticons, please tell me how to put them into my POSTS & messages, thank you.

iPhoto -> Preferences -> Accounts
Regards
TD

After burning a successful DVD in iDVD out of FCPX, how can I see the settings it used?

After burning a successful DVD in iDVD out of FCPX, how can I see the settings it used?
So I finally burned a DVD out of a Apple Pro Res file into iDVD in PAL format. My question now is how can I find out what the exact burn properties were so that I can apply the same burn properties to a project in Compressor 4?
Is it possible to see what iDVD did?

Why don't you ask this question on the iDVD forum?

How can I easily create a playlist contain all the songs on my iPhone

How can I easily create a playlist containing all the songs on my phone? I have iOS 7.1.1. on the iPhone. Older versons of iOS had a one button operations to add all songs. iOS 7 does not seem to have this one button operation, which requires me to add songs individually. Considering I have over 1500 songs on my iPhone this takes a long to to do.

It has always been very basic to always maintain a backup copy of your computer for this very occasion. Use your backup copy of your computer to put everything on the new one.
If for some reason you have failed to backup, big mistake, then you can transfer itunes purchases from the iphone to the computer: File>Transfer Purchases
You may be able to buy a 3rd party program to get any other music off of the iphone ( not supported by Apple).
When you sync the iphone, it will erase the current content and replace with content form the new computer.
"Not happy with itunes right now, more then a bit of a joke"
Not itunes fault that you did not do the very basics and maintain a backup copy.

We have a large family, 5 kids and two adults all with iPads, iPhones, Mac Books, Servers.... How can we combine our purchases to use on all our devices. We have two Apple ID's and sometimes buy multiple copies because of how we are limited...

We have a large family, 5 kids and two adults all with iPads, iPhones, Mac Books, Servers.... How can we combine our purchases to use on all our devices. We have two Apple ID's and sometimes buy multiple copies because of how we are limited...

Hello Halfback71,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Frequently asked questions about Apple ID
http://support.apple.com/kb/ht5622
I have multiple Apple IDs. Is there a way for me to merge them into a single Apple ID?
Apple IDs cannot be merged. You should use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs.
If you are wondering how using multiple Apple IDs relate to iCloud, see Apple IDs and iCloud.
Best of luck,
Mario

How can I edit multiple clips with different frame rates on the same timeline

how can I edit multiple clips with different frame rates on the same timeline

You do not want to edit material from different frame rates on one timeline. You CAN do this, but it is a very bad idea - and this is why.
Once you establish the sequence frame rate - lets say it is PAL material at 25fps, any material that you drop into the sequence other than 25 fps will have to be changed to play at 25 fps. If the material you add is NTSC (29.97), FCP will DROP 5 frames per sec to bring the frame rate down to 25 fps. Which 5 get thrown away? Every 6th one. This yields a funky cadence that becomes even more complex as as there are also interlaced fields (DV/NTSC is an interlaced format). Oh, and by the way, the image sizes are different as well. DV/PAL has 576 lines of resolution and DV/NTSC has 480. FCP has to scale up the NTSC to fit the PAL frame.
You do not want FCP adjusting these things on the fly. You want to do a thoughtful (and time consuming) conversion so that you end up with all your material in one format with the best possible image from the conversion process. Compressor can do an adequate job with Frame Controls turned on. The Natress Standards Conversion FCP plugin is another way to go. A third option is to find a post house that can do the conversion for you using a hardware based process.
The good news is, once everything is in the same format, editing it will be painless and the output process very quick.
Whatever frame rate/ image size you select, I'd suggest using ProRes for the codec. It is 4:2:2 color and will withstand color correction and composting with much more grace than any variant of DV based codecs.
Have fun.
x

How can I move a clip from one movie to another

How can I move a clip from one movie to another?

If it's just a clip, you can simply go to the other project and Add Media/From Files and Folders.
But if it's a part of your movie -- say a sequence of clips or a clip that's had effects added to it -- you technically can't cut and paste betweeen projects in Premiere Elements. However, some people have been able to do it using the third party program ClipMate, available online.

How can i plot a histogram with using the results of Line Length

PLS HELP.How can i prepare a histogram with using the results of line length code(It is somewhere in the middle).
This is a final exam take-home question. I would appreciate if you can help?
import java.awt.*;
import java.awt.event.*;
import java.io.*;
import javax.swing.*;
import java.text.*;
import java.io.File;
public class WordAnalyser extends JFrame implements ActionListener
private JMenuItem jmiAc, jmiSil, jmiCikis, jmiAnaliz, jmiHakkinda, jmiKullanim;
private JTextArea jta1, jta2;
private JFileChooser jFileChooser = new JFileChooser();
File hafizada;
File aktarilan = new File("Sonuc.txt");
// Main method
public static void main(String[] args)
WordAnalyser frame = new WordAnalyser(); /* Ana ekran olusturulur */
frame.setSize(400, 300); /* Degerleri belirlenir */
frame.setVisible(true); /* Gorunebilirligi ayarlanir */
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
public WordAnalyser()
setTitle("Serkan Ozgen Dosya Inceleme Programina Hos Geldiniz");
JMenuBar mb = new JMenuBar();
setJMenuBar(mb);
JMenu fileMenu = new JMenu("Dosya");
fileMenu.setMnemonic('F');
mb.add(fileMenu);
JMenu helpMenu = new JMenu("Degerlendirme");
helpMenu.setMnemonic('H');
mb.add(helpMenu);
JMenu kullanimMenu = new JMenu("Kullanim Kilavuzu");
mb.add(kullanimMenu);
fileMenu.add(jmiAc = new JMenuItem("Ac", 'A'));
fileMenu.add(jmiSil = new JMenuItem("Sil", 'S'));
fileMenu.add(jmiCikis = new JMenuItem("Cikis", 'C'));
helpMenu.add(jmiAnaliz = new JMenuItem("Analiz", 'D'));
helpMenu.add(jmiHakkinda = new JMenuItem("Hakkinda", 'H'));
kullanimMenu.add(jmiKullanim = new JMenuItem("Kullanim"));
getContentPane().add(new JScrollPane(jta1 = new JTextArea()), BorderLayout.CENTER);
getContentPane().add(jta2 = new JTextArea(), BorderLayout.SOUTH);
jmiAc.addActionListener(this);
jmiSil.addActionListener(this);
jmiCikis.addActionListener(this);
jmiAnaliz.addActionListener(this);
jmiHakkinda.addActionListener(this);
jmiKullanim.addActionListener(this);
public void actionPerformed(ActionEvent e)
String actionCommand = e.getActionCommand();
if (e.getSource() instanceof JMenuItem)
if ("Ac".equals(actionCommand))
Ac();
else if ("Sil".equals(actionCommand))
Sil();
else if ("Cikis".equals(actionCommand))
System.exit(0);
else if ("Analiz".equals(actionCommand))
sayim();
else if ("Hakkinda".equals(actionCommand))
JOptionPane.showMessageDialog(this,
"!!!! Bu program text analizi gerceklestirir. Her hakki saklidir SERKAN OZGEN!!!!",
"Bu program hakkinda",
JOptionPane.INFORMATION_MESSAGE);
else if ("Kullanim".equals(actionCommand))
     JOptionPane.showMessageDialog(this,
     " Ilk once dosya menusunden Ac i tiklayarak analiz etmek istediginiz Dosyayi seciniz (Lutfen uzantisi *.txt \nveya *.log olsun). Daha sonra Degerlendirme menusunden analizi tiklarsaniz dosyanizda kac adet rakam, harf, \ncumle ve kelime oldugunu gorebilirsiniz. Simdiden kolay gelsin",
     "Programin kullanim detaylari",
     JOptionPane.INFORMATION_MESSAGE);
private void Ac()
if (jFileChooser.showOpenDialog(this) == JFileChooser.APPROVE_OPTION)
hafizada = jFileChooser.getSelectedFile();
Ac(hafizada);
// Acilan Dosyayi ana ekranda gostermeye yariyan bir method
private void Ac(File file)
try
// Acilan dosyayi okuma ve ana ekranda gosterme
BufferedInputStream in = new BufferedInputStream(new FileInputStream(file));
byte[] b = new byte[in.available()];
in.read(b, 0, b.length);
jta1.append(new String(b, 0, b.length));
in.close();
catch (IOException ex)
// Temizle tusunun hangi ekranlara etki edecegini secme
private void Sil()
jta1.setText("");
jta2.setText("");
private void sayim()
int buff;
int sayac = 0;
int Cumleler = 0;
int Kelimeler = 0;
int Karakterler = 0;
int Satirlar = 0;
int Rakamlar = 0;
boolean start = true;
int linenum = 0;
try
FileInputStream instream = new FileInputStream(hafizada);
FileOutputStream outstream = new FileOutputStream(aktarilan);
     BufferedReader infile = new BufferedReader(new InputStreamReader(new FileInputStream(hafizada)));
PrintStream out = new PrintStream(outstream);
     out.println("---Kelime Avcisinin Sonuclari---");
     String line = infile.readLine();
     while (line != null){
     int len = line.length();
     linenum++;
     line = infile.readLine();
     out.println("Line Length :"     + linenum + "\t" +len);
while ((buff=instream.read()) != -1)
switch((char)buff)
case '?': case '.': case '!': /* Eger "?", "." veya "!" gorurse program cumleleri ve kelimeleri arttirir*/
if (start == false)
Cumleler++;
Kelimeler++;
start = true;
break;
case ' ': case '\t': case ',': case ';': case ':': case'\"': case'\'': /* Eger /t,;:\ ve \" bu isarteleri goruruse program kelimeleri arttirir */
if (start == false)
Kelimeler++;
start = true;
break;
          case 'n': case '\n': /* Eger \n gorurse satirlari arttirir */
          if (start == false)
               Satirlar++;
               Kelimeler++;
               start = true;
          break;
default:
if (((char)buff >= 'a' && (char)buff<='z')|| /*a-z, A-Z veya - degerlerini gorurse karakterler arttirilir */
((char)buff >= 'A' && (char)buff<='Z')||
((char)buff == '-'))
Karakterler++;
if ((Kelimeler % 50) == 49)
if (start == true)
               out.println();
out.print((Kelimeler+1) + " ");
out.print((char)buff);
start = false;
          if ((char)buff >='0' && (char)buff <='9') { /* 0-9 gorurse rakamlari arttiri */
               Rakamlar++; }
}// switch
     }//while
instream.close();
out.println();
out.println();
out.println("Karakter sayisi: " + Karakterler);
     out.println("Kelime sayisi: " + Kelimeler);
out.println("Cumle sayisi: " + Cumleler);
     out.println("Satir sayisi: "+ Satirlar);
     out.println("Rakam sayisi: "+ Rakamlar);
outstream.close();
try
BufferedInputStream in = new BufferedInputStream(new FileInputStream(aktarilan));
byte[] b = new byte[in.available()];
in.read(b, 0, b.length);
jta2.append(new String(b, 0, b.length));
in.close();
catch (IOException ex)
catch (Exception e)
System.out.println(e);
}

Why is it that you're not interested in IOExceptions?
catch (IOException ex)
} Empty catch blocks is a hallmark of foolish Java code. At least print out the stack trace.
%

I'm retiring my old computer (windows xp) to a new computer (windows 7). How can i easily move my itunes music from the old computer to the new computer? i have my playlists organized in my old computer, i would like it to stay that way in my new computer

i'm retiring my old computer (with windows xp) and bought a new computer (with windows 7). How can i easily move my itunes music from the old computer to the new computer? i have my playlists organized in my old computer, i would like it to stay that way in my new computer. I also have my ipods, iphone sync'd in the old computer so i want to make sure that things won't get messed up (my apps, playlists, etc) when i move over everything to the new computer and sync all my devices with the new computer.
Thanks in advance for the tips.

Make sure the XP box is upgraded to the latest version of itunes. Also make sure it's using the itunes media folder layout as explained here, because that's what the W7 is going to be using.
http://support.apple.com/kb/HT3847
Install itunes on the new W7 PC.
Get these folders from the XP machine
C:\Documents and Settings\username\My Documents\My Music\iTunes
C:\Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
And put them here on the W7 machine
C:\users\username\My Music\iTunes
C:\Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\

In Aperture 3, how can I easily move entire projects out of my main Ap Library into other libraries? My Ap library is running super slow because it's overloaded l so I have created two new libraries, but can't seem to move the projects into them

In Aperture 3, how can I easily move entire projects out of my main Ap Library into other libraries? My Ap library is running super slow because it's overloaded, so I have created two new libraries, but can't seem to move the projects into them?

Hello Annabel,
To move entire projects export them as Aperture Libraries, and then import those Libraries into the other Aperture Library:
Select the Project in the Inspector, then
File -> Export -> Project as Library
In the other Library do:
File -> Import -> Library/ Project
But I am not quite convinced, that the size of your current Aperture Library is responsible for the slowness of Aperture - Aperture is designed to cope with huge libraries.
You may want to post your hardware setup and details of your library, and some of the hardware experts here may help you to find the reason for the slowness.
A huge library should only be a problem, if the projects are too big, and if you have many, many smart albums at the root level of your library.
So keep the projects small, and try to move some of your smart albums to lower levels in your folder structure (then Aperture does not need to scan all of your images to build the smart album).
Other reasons for Aperture's slowness may be, e.g.
An overfull system drive and/or external drive (keep at least 20% of your drives empty)
lack of RAM
a corrupted Aperture Library, that needs repairing
Have you checked those options, before you split your library? It would be a pity to split it, for you would loose the ability to browse all parts at the same time, to use all your images in the Media Browser, etc.
Regards
Léonie

How can I easily transfer all my photos on a laptop?

How can I easily transfer all my photos on a laptop?

The quickest way is to connect the iPhone to your laptop using the USB cable and then launch one of the photo apps, either Photos for Mac, iPhoto, Aperture, or Image Capture. All of them will show an Import panel, when you launch them and allow you to download the photos to your Mac.

I'm suddenly unable to join my Airport network with my PowerBook G4. I am able to access my network with all of my other devices. How can I once again establish access using my PowerBook G4.

I'm suddenly unable to join my Airport network with my PowerBook G4. I am able to access my network with all of my other devices. How can I once again establish access using my PowerBook G4?

Bruce777 solved this for me, thank you Bruce! My printer now works perfectly on my new wifi network!
Bruce's instructions, for anyone else having the same issue:
- delete any previously set up printers
- scrub old hp software and update software to get the hp 2.8 drivers
- remove the usb cable from the printer if you have one connected
- reset the printer network to hpsetup (hold down the power button and press network button 2x and then cancel 3x, release power button.)
- print out the wireless network test report (hold down the network button and press the update button 2x). verify the network name / ssid is hsetup
- got to sys prefs > network and change the mac wireless network to hpsetup
- go to the sys pref > print scan
- add the HP 8000 printer
- click on the options and supplies button and click on the Show Printer Webpage
- click on the networking tab > wireless in the left pane > start network wizard and change the network from hpsetup to your network
- finish (this page may freeze up. close the browser)
- go back to the sys prefs and change the wireless network back to your networt
- go to the printer and print out the wireless network test report (press network button and update button 2x). Check that the SSID is your network
- go to sys prefs > print scan > select your printer > options & supplies > show printer webpage > network info (check ssid and compare to wireless network test report)
- try printing something to your printer. It might take a little time the first print.

How can I easily take clips burned using a Sony VRD MC3 Unit?

Similar Messages

Maybe you are looking for