How can I edit a catalog's html?

I have an "add to cart" button on my catalog page, that I would like to remove.
Additionally, I also would like to know how to make my catalog pages appear on my list of pages.

Hi,
JDeveloper 9.0.3 and 9.0.4 don't have a WYSIWYG HTML editor. JDeveloper 9.0.5 that will be close to 9.0.4 has a WYSIWYG editor for both, HTML and JSP.
Frank

Similar Messages

How can I edit lightroom 5 smart previews on mac book pro (mbp) when the lightroom 5 master image files are on my external hard drive is disconnected from the mbp

How can I edit lightroom 5 smart previews on mac book pro (mbp) when the lightroom 5 master image files are on my external hard drive is disconnected from the mbp? So far when I try to disconnect the external HD from the mbp, I get the following pop up window: The disk "external hard drive A" couldn't be ejected because "Lightroom" is using it. Quit that application and try to eject this disk again. When I do that and restart Lightroom 5, the Adobe Photoshop Lightroom - Select Catalog screen pops up but doesn't list my external hard drive A as a choice.
I've reviewed Adobe's Lightroom Help | Smart Previews Lightroom 5 web page and still haven't been able to figure what I'm doing wrong. Any help would be appreciated.

Your internal HDD. by default, is named 'Macintosh HD'. From what information you supplied, it looks like there is already a Lightroom catalog installed on you local (internal) HDD using the standard naming convention Adobe uses as well as a Lightroom catalog on your external drive which you created. To be sure of which catalog Lightroom is loading when it starts up, To do this, start Lightroom as you normally would. After it starts, select the Lightroom menu item, then select the Catalog Preferences item and finally, navigate to the General tab. The Location information will tell you exactly what catalog Lightroom is opening by default. This will likely be the Photography Mac Book Pro Versions catalog on your external HDD. Once that is confirmed, you are ready to proceed. As an additional test/verification, you can shut down Lightroom and, this time, start Lightroom while holding down the ALT/OPTION key. This will cause Lightroom to pause and display a screen which will allow you to chose a different catalog to open. Navigate to the /Users/[user name]/Pictures/Lightroom folder and select the Lightroom 5 Catalog.lrcat file. When Lightroom comes up, there should be no previews or folders as this catalog should be empty. Now you can be certain which catalog is being used and which catalog has all your data and you are ready to migrate your current catalog. Shut down Lightroom.
To migrate your current catalog, use Finder to locate your Photography Mac Book Pro Versions folder on your external drive. Select the folder and select COPY from the context menu. Next, use Finder to navigate to the /Users/[user name]/Pictures/Lightroom folder on you internal HDD. You can start at the Macintosh HD level and work your way down by opening each level (Macintosh HD/Users/[user name]/Pictures). Select the /Pictures folder and then select PASTE... from the context menu. When the COPY/PASTE is complete, you should see the following files on the Macintosh HD:
Macintosh HD/Users/[user name]/Pictures/Lightroom/ and
Macintosh HD/Users/[user name]/Pictures/Photography Mac Book Pro Versions
The Macintosh HD/Users/[user name]/Pictures/Lightroom folder will contain the empty default catalog the Adobe created when Lightroom was installed and Macintosh HD/Users/[user name]/Pictures/Photography Mac Book Pro Versions will contain a copy of the catalog you created on your external HDD.
You are almost done now. Make sure your external drive is still attached for this step. Restart Lightroom using the ALT/OPTION key again. When the Select Catalog screen appears, select the Choose a Different Catalog button (lower left side). When you do, a Finder window will open to allow you to navigate to a catalog of your choosing. Navigate to Macintosh HD/Users/[user name]/Pictures/Photography Mac Book Pro Versions and select the file Photography Mac Book Pro Version.lrcat. This is the copy you just created. Select the Open button and Lightroom should start. You should see all of your previews and settings just as before. Also, in the left hand panel, all of your folder should show up and none of them should be dimmed and none of your previews should display a small exclamation point badge. Either a dimmed folder name or an exclamation point badge indicates that Lightroom can't find the associated image file. If everything looks good, go to the Lightroom menu, select Preferences and then select the General tab. Under Default Catalog, select an option to either load the LAST catalog opened or select the Users/[user name]/Pictures/Photography Mac Book Pro Versions catalog from the drop down. Shut down Lightroom and then restart it normally. This time, when Lightroom starts, you should be viewing the new copy of your catalog. You can confirm this by looking at the General tab on the Catalog Preferences screen (Lightroom/Catalog Preferences menu items). Shut down Lightroom once again and this time, eject your external drive before restarting. This time, your folders in the left hand panel will be dimmed but you should be able to work with your smart previews. If Lightroom should display a Select Catalog screen with the external drive detached, double check your settings as it indicates Lightroom is still looking at the copy of the catalog on the external drive rather than the new copy you made.
Finally, if you are seeing dimmed folders and/or exclamation point badges with the external drive attached, this indicates a problem. You can select any folder and select Update Folder Location from the context menu. This will allow you to navigate to the copy on the external drive and select it. Lightroom will then update the catalog (select to synchronize the content). This will not only clear the dimmed folder problem but also remove the exclamation point badges for all photos in that missing folder. However, it may indicate that not all went well with the copy of the catalog so make sure to verify all went well. You can use the Get Info option on the two folders. You should see the same number of files/folders for both the copy on the internal drive as well as on the external drive but you can't rely on the byte count because of the possibility of differences between the geometry of the two drives. Hope this all helps!

How can you edit a previously burned DVD from an older iMovie app?

I converted VHS home movies to DVD years ago on the origonal iMovie app. How can I edit those DVD's now? Do I need a third party app to convert the DVD files for use in the new iMovie?

Yes, you need to 'reverse engineer' the highly compressed mpeg2 format of the DVDs.
You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
which is free, but you must also have the Apple mpeg2 plugin :
http://www.apple.com/quicktime/mpeg2/
(unless you are running Lion in which case see below))
which is a mere $20.
Another possibility is to use DVDxDV:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
which costs $25.
For the benefit of others who may read this thread:
Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
If you are running Lion:
From the MPEG Streamclip homepage
The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion, however MPEG Streamclip still needs it.
To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. You don't have to install QuickTime 7.

How can I edit the file name of the home page?

How can I edit the file name of the home page?
Gr Ammani

I have a similar issue with regards to the filename...
When I navigate to my website, it doesnt work unless I actually type the filename at the end of it. Example: type in "www.whitelion.com" (this is my real domain name) and it doesnt work. When I type in "www.whitelion.com/index.html" then it works.
This is obviously inconvenient because my clients will never know to add the filename to the end of the site.
Is there any setting or way to get the page to appear by just typing the original domain name without adding the extension?
Thanks,
Emelia

How can I edit material from 1 or more dvds that I created from my own filmed material in iMovie but which I no longer have in iMovie

How can I edit material from 1 or more dvds that I created from my own filmed material in iMovie but which I no longer have in iMovie

You need to 'reverse engineer' them :
You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
which is free, but you must also have the Apple mpeg2 plugin :
http://www.apple.com/quicktime/mpeg2/
(unless you are running Lion in which case see below))
which is a mere $20.
Another possibility is to use DVDxDV:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
which costs $25.
For the benefit of others who may read this thread:
Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
And from the TOU of these forums:
Keep within the Law
No material may be submitted that is intended to promote or commit an illegal act.
Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store.
If you are running Lion:
From the MPEG Streamclip homepage
The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion, however MPEG Streamclip still needs it.
To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. You don't have to install QuickTime 7.

How can i edit / customize the font in the navigation bar in iweb?r

how can I edit / customize font size and color in the navigation bar on an iweb created page?

This tutorial may help: #24 - How to Change the Basic, Rollover and Visited Color of an iWeb Navbar. It only applies to the various colors.
Wyodor has posted code to be put in an HTML snippet that will increase the font size.
<script language="JavaScript" type="text/javascript">

</script>
Increase the size by increments of .1 until you get the size you want. You'll need to publish the site before you'll see the change.
If you only have a couple of pages in your site you can create your own text based navbar. That will give you complete control over font, size, color, spacing, etc. However, be sure to use only Web Safe Fonts or the navbar will not look like you want it on those computers that do not have the font you used installed. This demo page is an example: Text Based Navbar. With more than a couplke of pages updating such a navbar can become a real pain. However, it is much more search engine friendly.
OT

How can I edit my PDF file on cloud?

I cannot figure out how can I edit my PDF file on Acrobat Pro cloud version.

Hi abulr60330783,
I've checked your account, and couldn't see what version of Acrobat that you have. You may be referring to the Acrobat DC which Adobe announced this week, but that isn't available just yet.
So, for the time being, you'll need to use Acrobat Pro XI or earlier to edit PDF files. You can download a 30-day trial from http://www.adobe.com/products/acrobat.html.
Best,
Sara

How can I edit a PDF? Someone told me about the "typewriter" feature, but can't locate that.

How can I edit a PDF? Someone told me about the "typewriter" feature, but can't locate that.

Hi karenw22462415,
You'll need to Acrobat to edit a PDF file. If you don't have Acrobat, you're welcome to download a 30-day trial from http://www.adobe.com/products/acrobat.html.
This Help document will get you started: https://helpx.adobe.com/acrobat/using/edit-text-pdfs.html.
Best,
Sara

How can I tell which catalog a missing image belongs to?

How can I tell which catalog a missing image belongs to?
Beating a dead horse.....Everytime I need "missing images" in LR4.2, I cannot access them, even though I am looking right at the location they presntly occupy because thye image is ALREADY IN ANOTHER CATALOG.
HOW frustrating is this...going on 8 months now. But I need the images and I suppose I could just go back and reprocess 10,000 images that are missing in my collections but I have tried many solutions offered over the months that are just impractical.
So Now I want to approach this thing from the other direction...
If let's say one image is already associated with another catalog that houses that collection, ( and the collection is important because it has the edits), i want to go to that catalog instead.
How do I do this?
Any Ideas?

So Now I want to approach this thing from the other direction...
If let's say one image is already associated with another catalog that houses that collection, ( and the collection is important because it has the edits), i want to go to that catalog instead.
How do I do this?
It sounds as if you have been using separate catalogs for sets of images which are in separate folders. Perhaps you have had good reason to do that. But I would now make three linked observations:
It seems that you are now more able to both find, and distinguish, things via a folder structure - rather than via whatever classification of different catalogs you may have thought were going to be helpful to you
accordingly, having these mutiple catalogs is now getting in your way
using folders works just the same inside one big catalog, as it does inside each of two smaller catalogs.
The solution to the first two, IMO, is to merge your separate catalogs into one catalog. Then the third will kick in. You can still keep the current separate catalogs for archive or reference purposes, but the "Import from Another Catalog" function will MERGE copies of all their contents into a combined, larger catalog that you can use going forward. (The images and folders themselves, do not change in any way when you do this.)
If you wish to track which catalog each image is currently inside, you could apply some kind of keyword across all images in that catalog, before carrying out the merge. However, it sounds to me as if your folder arrangement currently mirrors the different catalogs in some way anyway - and will continue to convey the same information once combined.
Lightroom is designed to be able to work with large numbers of images more or less the same as with small numbers; and this has been anecdotally confirmed in many cases. AFAICT the main performance issue is not the size of the database, but the size and nature of the image data involved and the complexity of things you do with that, per image, also the ability of your computer system to carry these operations out, per image. (Another overall productivity issue is: do you need to keep navigating to and opening different catalogs; or... not!)
Even if you merge catalogs and then change your mind about all or some of that, you can either: retain and go back to the previous un-merged catalogs - or: to preserve further work done since merging, you can use Export as Catalog to copy out a certain highlighted set of images. Then you can Remove what you wish from the main catalog - using the exact same means of identifying which images require this - for example, the image set you have only just exported to a new catalog will still be highlighted inside the source catalog.
RP

How can i backup my catalog in PS elements 10

Backup in photoshop elements 10 continues to baffle me. I go thru the steps as instructed but when my catalog backs up to my external hard drive the files are on in XML format. Where are my pictures? when i attempt to open the file using Photoshop i get "Cant open because it's the wrong type of file. Does anyone know what I am doing wrong

Duplicate. Please keep replies in this thread:
how can i edit in photoshop elements 10 ?

How can I edit in Elements 10 or Premier Elements 10, slide shows created in Elements 8?

How can I edit in Elements 10 or Premier Elements 10, slide shows created in Elements 8?
Fortunen

When you installed version 10 did you convert your previous catalog?
If so, your projects should appear in the PSE10 Organizer. To search for them type PSESS into the search box.
You should then be able to open the project by double clicking on its thumbnail.
Then choose Output >> Edit in Premier Elements

My podcast is said to be "By Unknown" how can I edit that?

My podcast is said to be "By Unknown" how can I edit that?

You need to change that in your RSS feed.
What is your RSS feed?
Where are you hosting / managing your RSS feed?
Here is apples info on the podcast specs.
http://www.apple.com/itunes/store/podcaststechspecs.html
Regards,
Rob W
podCast411

How can I make different catalogs from the same image

How can I make different catalogs from the same image where that image has been changed in some way between the catalogs. For instance if I wanted to have a catalogs for cropped images and have 3 catalogs one for 4x6 , 5x7 and 8x10 cropping. When I tried this , if I changed a file in one catalog that same image in the other would change also.

Do not confuse the creation of the crops and the display in collections per crop ratio.
Of course one virtual copy (VC) per crop ratio is needed. If the same image should be cropped in all 3 mentioned ratios there would be 3 VCs.
The OP asked how to have/see a set of same-crop-ratios.
After having created the virtual copies for whatever crop ratio he wants, the way to display this result in the fashion asked for is via smart collections, provided they can be found. Without a plugin the naming of the VC with the crop ratio applied is a straight way to achieve that.
IF the wish is to get new crops automatically added. (See my answers 2+3)
IF the wish is to creat static collections per crop ratio for a certain set of images, I'd go as follows:
1. Select all images you want to have cropped in that way,.
2. With this selection click on the + to add another collection and fill the dialog box like this:
Then navigate into this newly created selection and perform the 4x6 crop - according to taste individually or by synchronizing the first crop.
Cornelia

How can i edit contacts in bulk

Bought an iPhone 5 and transfered contacts from my old phone and my phone contacts first and last name were reversed. How can I edit my address book contacts in bulk instead of one at a time? And then have these updates in my iPhone 5?

to any1 that wants to use the scripts and have them work just type "save" on the next like after end tell and itll do it........

How can I edit multiple clips with different frame rates on the same timeline

how can I edit multiple clips with different frame rates on the same timeline

You do not want to edit material from different frame rates on one timeline. You CAN do this, but it is a very bad idea - and this is why.
Once you establish the sequence frame rate - lets say it is PAL material at 25fps, any material that you drop into the sequence other than 25 fps will have to be changed to play at 25 fps. If the material you add is NTSC (29.97), FCP will DROP 5 frames per sec to bring the frame rate down to 25 fps. Which 5 get thrown away? Every 6th one. This yields a funky cadence that becomes even more complex as as there are also interlaced fields (DV/NTSC is an interlaced format). Oh, and by the way, the image sizes are different as well. DV/PAL has 576 lines of resolution and DV/NTSC has 480. FCP has to scale up the NTSC to fit the PAL frame.
You do not want FCP adjusting these things on the fly. You want to do a thoughtful (and time consuming) conversion so that you end up with all your material in one format with the best possible image from the conversion process. Compressor can do an adequate job with Frame Controls turned on. The Natress Standards Conversion FCP plugin is another way to go. A third option is to find a post house that can do the conversion for you using a hardware based process.
The good news is, once everything is in the same format, editing it will be painless and the output process very quick.
Whatever frame rate/ image size you select, I'd suggest using ProRes for the codec. It is 4:2:2 color and will withstand color correction and composting with much more grace than any variant of DV based codecs.
Have fun.
x

How can I edit a catalog's html?

Similar Messages

Maybe you are looking for