How can I edit a clip on my iTunes?

I have a voice clip that I have uploaded from my iPhone to my iTunes on my Macbook Air. I need to send it off for an audition, and couldn't edit it precisely from the iPhone. How do I do that on my Macbook Air? Can I use iTunes, or would I have to use another programme? Many thanks! x

Import the file into iTunes, in Garage band, open a project, delete the existing track (track drop down) create new basic track, drag the file into te track, do your edits, save as, and use share to send it back to iTunes

Similar Messages

How can I edit multiple clips with different frame rates on the same timeline

how can I edit multiple clips with different frame rates on the same timeline

You do not want to edit material from different frame rates on one timeline. You CAN do this, but it is a very bad idea - and this is why.
Once you establish the sequence frame rate - lets say it is PAL material at 25fps, any material that you drop into the sequence other than 25 fps will have to be changed to play at 25 fps. If the material you add is NTSC (29.97), FCP will DROP 5 frames per sec to bring the frame rate down to 25 fps. Which 5 get thrown away? Every 6th one. This yields a funky cadence that becomes even more complex as as there are also interlaced fields (DV/NTSC is an interlaced format). Oh, and by the way, the image sizes are different as well. DV/PAL has 576 lines of resolution and DV/NTSC has 480. FCP has to scale up the NTSC to fit the PAL frame.
You do not want FCP adjusting these things on the fly. You want to do a thoughtful (and time consuming) conversion so that you end up with all your material in one format with the best possible image from the conversion process. Compressor can do an adequate job with Frame Controls turned on. The Natress Standards Conversion FCP plugin is another way to go. A third option is to find a post house that can do the conversion for you using a hardware based process.
The good news is, once everything is in the same format, editing it will be painless and the output process very quick.
Whatever frame rate/ image size you select, I'd suggest using ProRes for the codec. It is 4:2:2 color and will withstand color correction and composting with much more grace than any variant of DV based codecs.
Have fun.
x

How can i edit a clip or share it. I cant change the sencond the clips lasts or insert an image or a text! whats going on???

how can i edit a clip or share it. I cant change the sencond the clips lasts or insert an image or a text! whats going on???

you have watched and understood the tutorials?
http://help.apple.com/imovie/

How can I edit or delete music from itunes match?

How can I edit or delete music from itunes match?

Hi,
If you activate match on your new laptop, you will have access to all music that you matched or uploaded. You have the option to retain the music by downloading to your computer. If you delete music, it will delete from cloud.
Jim

How can I edit mp3 info w/o iTunes for free?

I just switched from a PC to a Macbook Pro. On my PC, I simply right-clicked on an mp3 file, clicked properties, & I edited all of the info contained within that mp3 file. Then, once cleaned up, I imported the mp3 files into iTunes. So now I want to edit some mp3 info on a bunch of mp3 files on my Macbook Pro before I import them into iTunes. I tried editing in the "Get Info" window, but it's not editable. So how can I do this? And how do I do this for free? I'd prefer not to have to download a program to do what seems like such a simple task, but If I have to use another program, I want something that is clean, simple, & free. Thanks.

Hi Ingo,
Not sure that you read my entire entry. I want to edit the mp3 files BEFORE importing them into iTunes. I have dozens of albums & songs that are missing tons of info like title, artist, track #, etc, or the mp3 files have info in them that I don't want. I'd prefer to edit them & clean them all up first before importing them all into iTunes because they will just have blank boxes & they will all be grouped together at the bottom of my iTunes window, & I won't know which file is which. Right now they're in seperate folders, so I know which artist & album they are. maybe there's a way to do this in iTunes, but from my experience, I've always had trouble knowing which file is with which artist / album when I import several albums missing key info. That's why I like to add it before importing. I guess I could just import 1 album at a time, but that seems very time consuming. Let me know what you think.

How can I edit part of a clip

How can I edit part of a clip in iMovie.

First, select the portion of the clip that you would like to edit. Do this by dragging your mouse. A yellow border should be around this portion of the clip.
Next, right-click inside the yellow border and select SPLIT CLIP. Now you have a separate clip that you can apply your edit to.

How can I lock a clip to storyline, timeline or song in Final Cut Pro?

My friends and I made our own version of Pharrell Williams happy video and I'm trying to edit it. The thing is that there are places where we sing and we want the song to match our lips so how can I lock the clip in place? I'm very new to editing and FCP so please write detailed directions.
Thanks =)
Here is an example of the video:
https://www.youtube.com/watch?v=kxu3w5U6fSI

Melodrama731 wrote:
... Pharrell Williams happy video and I'm trying to edit it. The thing is that there are places where we sing and we want the song to match our lips so how can I lock the clip in place?..
when it comes to 're-edit' things.. such as:
2014 FIFA World Cup on ESPN Commercial: I Believe
which 'inspired' me to do that:
http://youtu.be/du4xWTtYKVY
(the kids are my son's team)
I drag the original into the storyline
I set Markers (keyboard: m) to the original edit-points
I have the pre-selections of my material in the Events browser, set edit-mode to 'video only'/shift-2
set playhead to marker (magnetic is a good help), hit q
'fine tune' the edit (edit/colors/effects/...)
select clip and cmd-shift-arrow-down to apply final edit to the storyline
jump to next marker (ctrl-' )
That is a very fast way to 'dub' professional edits; and: I'm learning a lot, e.g. it is not only the edit-points, but the 'content' which makes a good edit 'flow' (which lacks my version) ...

How can i edit contacts in bulk

Bought an iPhone 5 and transfered contacts from my old phone and my phone contacts first and last name were reversed. How can I edit my address book contacts in bulk instead of one at a time? And then have these updates in my iPhone 5?

to any1 that wants to use the scripts and have them work just type "save" on the next like after end tell and itll do it........

How can I move a clip from one movie to another

How can I move a clip from one movie to another?

If it's just a clip, you can simply go to the other project and Add Media/From Files and Folders.
But if it's a part of your movie -- say a sequence of clips or a clip that's had effects added to it -- you technically can't cut and paste betweeen projects in Premiere Elements. However, some people have been able to do it using the third party program ClipMate, available online.

How can I edit photos in iPhoto in Photoshop Elements? I select PE in iPhoto preferences but they stay in iPhoto for editing.

How can I edit photos in iPhoto in Photoshop Elements? I select PE in iPhoto preferences but they stay in iPhoto for editing.

Here's something you can try with a copy of your current library.
1 - go to iPhoto's Events preference pane and set the auto split option to 1 day per even.
2 - go the the Events mode, select all Events.
3 - go to the Events menu and and select Autosplit Selected Events.
which will give you an event for each day.
4 - again select all events (although it might be better do to fewer at a time) and export them to your desired destination via the File ➙ Export ➙ File Export menu option with the following settings:
The workflow above will produce a folder for each days photos with the date as the folder's title.

How can I edit lightroom 5 smart previews on mac book pro (mbp) when the lightroom 5 master image files are on my external hard drive is disconnected from the mbp

How can I edit lightroom 5 smart previews on mac book pro (mbp) when the lightroom 5 master image files are on my external hard drive is disconnected from the mbp? So far when I try to disconnect the external HD from the mbp, I get the following pop up window: The disk "external hard drive A" couldn't be ejected because "Lightroom" is using it. Quit that application and try to eject this disk again. When I do that and restart Lightroom 5, the Adobe Photoshop Lightroom - Select Catalog screen pops up but doesn't list my external hard drive A as a choice.
I've reviewed Adobe's Lightroom Help | Smart Previews Lightroom 5 web page and still haven't been able to figure what I'm doing wrong. Any help would be appreciated.

Your internal HDD. by default, is named 'Macintosh HD'. From what information you supplied, it looks like there is already a Lightroom catalog installed on you local (internal) HDD using the standard naming convention Adobe uses as well as a Lightroom catalog on your external drive which you created. To be sure of which catalog Lightroom is loading when it starts up, To do this, start Lightroom as you normally would. After it starts, select the Lightroom menu item, then select the Catalog Preferences item and finally, navigate to the General tab. The Location information will tell you exactly what catalog Lightroom is opening by default. This will likely be the Photography Mac Book Pro Versions catalog on your external HDD. Once that is confirmed, you are ready to proceed. As an additional test/verification, you can shut down Lightroom and, this time, start Lightroom while holding down the ALT/OPTION key. This will cause Lightroom to pause and display a screen which will allow you to chose a different catalog to open. Navigate to the /Users/[user name]/Pictures/Lightroom folder and select the Lightroom 5 Catalog.lrcat file. When Lightroom comes up, there should be no previews or folders as this catalog should be empty. Now you can be certain which catalog is being used and which catalog has all your data and you are ready to migrate your current catalog. Shut down Lightroom.
To migrate your current catalog, use Finder to locate your Photography Mac Book Pro Versions folder on your external drive. Select the folder and select COPY from the context menu. Next, use Finder to navigate to the /Users/[user name]/Pictures/Lightroom folder on you internal HDD. You can start at the Macintosh HD level and work your way down by opening each level (Macintosh HD/Users/[user name]/Pictures). Select the /Pictures folder and then select PASTE... from the context menu. When the COPY/PASTE is complete, you should see the following files on the Macintosh HD:
Macintosh HD/Users/[user name]/Pictures/Lightroom/ and
Macintosh HD/Users/[user name]/Pictures/Photography Mac Book Pro Versions
The Macintosh HD/Users/[user name]/Pictures/Lightroom folder will contain the empty default catalog the Adobe created when Lightroom was installed and Macintosh HD/Users/[user name]/Pictures/Photography Mac Book Pro Versions will contain a copy of the catalog you created on your external HDD.
You are almost done now. Make sure your external drive is still attached for this step. Restart Lightroom using the ALT/OPTION key again. When the Select Catalog screen appears, select the Choose a Different Catalog button (lower left side). When you do, a Finder window will open to allow you to navigate to a catalog of your choosing. Navigate to Macintosh HD/Users/[user name]/Pictures/Photography Mac Book Pro Versions and select the file Photography Mac Book Pro Version.lrcat. This is the copy you just created. Select the Open button and Lightroom should start. You should see all of your previews and settings just as before. Also, in the left hand panel, all of your folder should show up and none of them should be dimmed and none of your previews should display a small exclamation point badge. Either a dimmed folder name or an exclamation point badge indicates that Lightroom can't find the associated image file. If everything looks good, go to the Lightroom menu, select Preferences and then select the General tab. Under Default Catalog, select an option to either load the LAST catalog opened or select the Users/[user name]/Pictures/Photography Mac Book Pro Versions catalog from the drop down. Shut down Lightroom and then restart it normally. This time, when Lightroom starts, you should be viewing the new copy of your catalog. You can confirm this by looking at the General tab on the Catalog Preferences screen (Lightroom/Catalog Preferences menu items). Shut down Lightroom once again and this time, eject your external drive before restarting. This time, your folders in the left hand panel will be dimmed but you should be able to work with your smart previews. If Lightroom should display a Select Catalog screen with the external drive detached, double check your settings as it indicates Lightroom is still looking at the copy of the catalog on the external drive rather than the new copy you made.
Finally, if you are seeing dimmed folders and/or exclamation point badges with the external drive attached, this indicates a problem. You can select any folder and select Update Folder Location from the context menu. This will allow you to navigate to the copy on the external drive and select it. Lightroom will then update the catalog (select to synchronize the content). This will not only clear the dimmed folder problem but also remove the exclamation point badges for all photos in that missing folder. However, it may indicate that not all went well with the copy of the catalog so make sure to verify all went well. You can use the Get Info option on the two folders. You should see the same number of files/folders for both the copy on the internal drive as well as on the external drive but you can't rely on the byte count because of the possibility of differences between the geometry of the two drives. Hope this all helps!

How can I edit my website from another computer? and how can I create a new website next to the one, I have already? Can anyone help, please?

How can I edit my website from another computer? and how can I create a new website next to the one, I already have? Can anyone help, please?

Move the domain.sites file from one computer to the other.
The file is located under User/Library/Application Support/iWeb/domain.sites. Move this file to the same location on the other computer and double click and iWeb will open it. Remember, it is your User Library that you want and not your System Library, as you will not find iWeb there.
Just create a new site on the same domain file and it will appear below the other site. If you want them side by side then duplicate your domain file and have one site per a domain file and they can then be side by side.

Set up apple Id with invalid email so can't validate new account. How can I edit account info when I can't sign in for anything? Thx

Set up apple Id with invalid email so can't validate new account. How can I edit account info when I can't sign in for anything? Thx

Hi Franklin777,
If you are having issues with your Apple ID, this article will get you started.
Frequently asked questions about Apple ID
The first step is to find and edit the Apple ID you created:
Apple ID: Finding your Apple ID
If you need to reset your security questions this article will help ...
The rescue email address is a different address than the one you use for your Apple ID.
Rescue email address and how to reset Apple ID security questions
You can edit or delete your rescue email address at My Apple ID. To edit your rescue email address:
Navigate to My Apple ID using your web browser.
Click "Manage your account"
When prompted, sign in using your Apple ID and password.
Click Password & Security
You'll be asked to answer 2 of your 3 security questions before you can make any modifications. If you are unable to remember your answers, you can choose to send an email to your rescue email to reset your security questions.
Hope you get back on track soon!
- Judy

How can i fix a clip when the video and audio are not matching up?

How can i fix a clip when the video and audio are not matching up? I imported the video from a junkdrive in a .VOB format and concerted to a .mov the videos were filmed on a miniDVD recorder.

I would try detaching the audio and the dragging the audio to the left or right until it lines up.

How can I edit text tabs in Photoshop...?

how can I edit text tabs in Photoshop like in Illustrator that I can choose to view the tab rulers and edit the alignment on the tabs?
is it possible? otherwise I can't understand why I can use the tabs at all...
thanks!

No, tab-formatted text is not editable in the manner you desire. As for your question - tab is just a character like any other. You are simply taking a given kind of implementation for granted, nothing more, but that must not necessarily be the case for all programs. An evil programmer just could assign the tab key to forward delete or any other fancy function just as he could make your space key draw funky symbols from a different Unicode range, if you get my meaning... so simply take it the way it is. If editable formatting is high on your wishlist:
http://www.adobe.com/go/wish
Mylenium

How can I edit a clip on my iTunes?

Similar Messages

Maybe you are looking for