How can i edit a clip or share it. I cant change the sencond the clips lasts or insert an image or a text! whats going on???

how can i edit a clip or share it. I cant change the sencond the clips lasts or insert an image or a text! whats going on???

you have watched and understood the tutorials?
http://help.apple.com/imovie/

Similar Messages

How can I edit lightroom 5 smart previews on mac book pro (mbp) when the lightroom 5 master image files are on my external hard drive is disconnected from the mbp

How can I edit lightroom 5 smart previews on mac book pro (mbp) when the lightroom 5 master image files are on my external hard drive is disconnected from the mbp? So far when I try to disconnect the external HD from the mbp, I get the following pop up window: The disk "external hard drive A" couldn't be ejected because "Lightroom" is using it. Quit that application and try to eject this disk again. When I do that and restart Lightroom 5, the Adobe Photoshop Lightroom - Select Catalog screen pops up but doesn't list my external hard drive A as a choice.
I've reviewed Adobe's Lightroom Help | Smart Previews Lightroom 5 web page and still haven't been able to figure what I'm doing wrong. Any help would be appreciated.

Your internal HDD. by default, is named 'Macintosh HD'. From what information you supplied, it looks like there is already a Lightroom catalog installed on you local (internal) HDD using the standard naming convention Adobe uses as well as a Lightroom catalog on your external drive which you created. To be sure of which catalog Lightroom is loading when it starts up, To do this, start Lightroom as you normally would. After it starts, select the Lightroom menu item, then select the Catalog Preferences item and finally, navigate to the General tab. The Location information will tell you exactly what catalog Lightroom is opening by default. This will likely be the Photography Mac Book Pro Versions catalog on your external HDD. Once that is confirmed, you are ready to proceed. As an additional test/verification, you can shut down Lightroom and, this time, start Lightroom while holding down the ALT/OPTION key. This will cause Lightroom to pause and display a screen which will allow you to chose a different catalog to open. Navigate to the /Users/[user name]/Pictures/Lightroom folder and select the Lightroom 5 Catalog.lrcat file. When Lightroom comes up, there should be no previews or folders as this catalog should be empty. Now you can be certain which catalog is being used and which catalog has all your data and you are ready to migrate your current catalog. Shut down Lightroom.
To migrate your current catalog, use Finder to locate your Photography Mac Book Pro Versions folder on your external drive. Select the folder and select COPY from the context menu. Next, use Finder to navigate to the /Users/[user name]/Pictures/Lightroom folder on you internal HDD. You can start at the Macintosh HD level and work your way down by opening each level (Macintosh HD/Users/[user name]/Pictures). Select the /Pictures folder and then select PASTE... from the context menu. When the COPY/PASTE is complete, you should see the following files on the Macintosh HD:
Macintosh HD/Users/[user name]/Pictures/Lightroom/ and
Macintosh HD/Users/[user name]/Pictures/Photography Mac Book Pro Versions
The Macintosh HD/Users/[user name]/Pictures/Lightroom folder will contain the empty default catalog the Adobe created when Lightroom was installed and Macintosh HD/Users/[user name]/Pictures/Photography Mac Book Pro Versions will contain a copy of the catalog you created on your external HDD.
You are almost done now. Make sure your external drive is still attached for this step. Restart Lightroom using the ALT/OPTION key again. When the Select Catalog screen appears, select the Choose a Different Catalog button (lower left side). When you do, a Finder window will open to allow you to navigate to a catalog of your choosing. Navigate to Macintosh HD/Users/[user name]/Pictures/Photography Mac Book Pro Versions and select the file Photography Mac Book Pro Version.lrcat. This is the copy you just created. Select the Open button and Lightroom should start. You should see all of your previews and settings just as before. Also, in the left hand panel, all of your folder should show up and none of them should be dimmed and none of your previews should display a small exclamation point badge. Either a dimmed folder name or an exclamation point badge indicates that Lightroom can't find the associated image file. If everything looks good, go to the Lightroom menu, select Preferences and then select the General tab. Under Default Catalog, select an option to either load the LAST catalog opened or select the Users/[user name]/Pictures/Photography Mac Book Pro Versions catalog from the drop down. Shut down Lightroom and then restart it normally. This time, when Lightroom starts, you should be viewing the new copy of your catalog. You can confirm this by looking at the General tab on the Catalog Preferences screen (Lightroom/Catalog Preferences menu items). Shut down Lightroom once again and this time, eject your external drive before restarting. This time, your folders in the left hand panel will be dimmed but you should be able to work with your smart previews. If Lightroom should display a Select Catalog screen with the external drive detached, double check your settings as it indicates Lightroom is still looking at the copy of the catalog on the external drive rather than the new copy you made.
Finally, if you are seeing dimmed folders and/or exclamation point badges with the external drive attached, this indicates a problem. You can select any folder and select Update Folder Location from the context menu. This will allow you to navigate to the copy on the external drive and select it. Lightroom will then update the catalog (select to synchronize the content). This will not only clear the dimmed folder problem but also remove the exclamation point badges for all photos in that missing folder. However, it may indicate that not all went well with the copy of the catalog so make sure to verify all went well. You can use the Get Info option on the two folders. You should see the same number of files/folders for both the copy on the internal drive as well as on the external drive but you can't rely on the byte count because of the possibility of differences between the geometry of the two drives. Hope this all helps!

How can I edit a scanned PDF document

How can I edit scanned pdf document

Hi vejaietwaroo,
Could you please let us know the Adobe application that you are using?

How can I edit multiple clips with different frame rates on the same timeline

how can I edit multiple clips with different frame rates on the same timeline

You do not want to edit material from different frame rates on one timeline. You CAN do this, but it is a very bad idea - and this is why.
Once you establish the sequence frame rate - lets say it is PAL material at 25fps, any material that you drop into the sequence other than 25 fps will have to be changed to play at 25 fps. If the material you add is NTSC (29.97), FCP will DROP 5 frames per sec to bring the frame rate down to 25 fps. Which 5 get thrown away? Every 6th one. This yields a funky cadence that becomes even more complex as as there are also interlaced fields (DV/NTSC is an interlaced format). Oh, and by the way, the image sizes are different as well. DV/PAL has 576 lines of resolution and DV/NTSC has 480. FCP has to scale up the NTSC to fit the PAL frame.
You do not want FCP adjusting these things on the fly. You want to do a thoughtful (and time consuming) conversion so that you end up with all your material in one format with the best possible image from the conversion process. Compressor can do an adequate job with Frame Controls turned on. The Natress Standards Conversion FCP plugin is another way to go. A third option is to find a post house that can do the conversion for you using a hardware based process.
The good news is, once everything is in the same format, editing it will be painless and the output process very quick.
Whatever frame rate/ image size you select, I'd suggest using ProRes for the codec. It is 4:2:2 color and will withstand color correction and composting with much more grace than any variant of DV based codecs.
Have fun.
x

How can I edit part of a clip

How can I edit part of a clip in iMovie.

First, select the portion of the clip that you would like to edit. Do this by dragging your mouse. A yellow border should be around this portion of the clip.
Next, right-click inside the yellow border and select SPLIT CLIP. Now you have a separate clip that you can apply your edit to.

I have multiple email accounts. One is a google email and another aol. I have the aol going into my google. I Now Go Lead Generate! Am using outlook on my pc. How can I get my outlook to share with my ipad?

I have multiple email accounts. One is a google email and another aol. I have the aol going into my google. I Now Go Lead Generate! Am using outlook on my pc. How can I get my outlook to share with my ipad?

In Mail Preferences/Accounts/each GMail account, set up the SMTP Outgoing Server for each account separately, going into SMTP name/edit/Advanced and specify the Username of each account. The Outgoing servers must be two different servers, authenticated by the Username and Password of each.
Otherwise, the GMail SMTP server will change the from address to that of the account where the SMTP server was setup.
Ernie

How can i edit contacts in bulk

Bought an iPhone 5 and transfered contacts from my old phone and my phone contacts first and last name were reversed. How can I edit my address book contacts in bulk instead of one at a time? And then have these updates in my iPhone 5?

to any1 that wants to use the scripts and have them work just type "save" on the next like after end tell and itll do it........

How can I edit photos in iPhoto in Photoshop Elements? I select PE in iPhoto preferences but they stay in iPhoto for editing.

How can I edit photos in iPhoto in Photoshop Elements? I select PE in iPhoto preferences but they stay in iPhoto for editing.

Here's something you can try with a copy of your current library.
1 - go to iPhoto's Events preference pane and set the auto split option to 1 day per even.
2 - go the the Events mode, select all Events.
3 - go to the Events menu and and select Autosplit Selected Events.
which will give you an event for each day.
4 - again select all events (although it might be better do to fewer at a time) and export them to your desired destination via the File ➙ Export ➙ File Export menu option with the following settings:
The workflow above will produce a folder for each days photos with the date as the folder's title.

How can I determine which computer a share is connected to in /Volumes from terminal or a script?

I run a set of virtual machines via Fusion on an iMac that we run automated tests on for our website. There is a folder on each VM called /Automation that is shared.
I have a python script that runs on the host, that will find an open VM, start it up and then mount the VM's /Automation folder. So if there is only 1 VM powered on, the folder shows up in /Volumes as /Volumes/Automation. The problem is when there are 2 or more VM's powered on, because then the shares start being named /Volumes/Automation-1 and Automation-2 etc. So my question is, how can I determine which computer each share belongs to from terminal or a script?
In other words, I'm looking for something like:
/Volumes/Automation = "FirstVirtualMachineName.local"
/Volumes/Automation-1 = "SecondVirtualMachineName.local"
Is there any way to determine which computer a mounted share is connected to? In the past, I've just unmounted all /Automation folders, and then mounted them in a particular order, but that's unreliable and messy in my opinion. If anyone knows a better way, please let me know. Any help is appreciated.
Thanks,

Well I think I have a workable solution. It's not perfect, but I think it will do the trick. I can put a spotlight comment on the folder similar to 'HostName=OSX-Automation-1.local' and can then retrieve that value from our server with the following python snippet:
import subprocess
out,err = subprocess.Popen(['osascript','-e','tell application \"Finder\" to get comment of \"Macintosh HD:Volumes:Automation-1\"'],stdout=subprocess.PIPE, stderr=subprocess.PIPE).communciate()
So I could just loop through each 'Automation*' folder in /Volumes and grab the name from the spotlight attributes on the directories. I don't think I really need to worry about the comments being overwritten, but I may have one of our launch daemons that run on the VM check that spotlight comment once a minute or something to ensure that the correct value is there.
If it ends up not working well in practice, I'm going to give your suggestion about a config script a shot. It would require a little more up front work, but seems as if it would be pretty solid after that.
Thanks again for helping me think it through

How can I edit my website from another computer? and how can I create a new website next to the one, I have already? Can anyone help, please?

How can I edit my website from another computer? and how can I create a new website next to the one, I already have? Can anyone help, please?

Move the domain.sites file from one computer to the other.
The file is located under User/Library/Application Support/iWeb/domain.sites. Move this file to the same location on the other computer and double click and iWeb will open it. Remember, it is your User Library that you want and not your System Library, as you will not find iWeb there.
Just create a new site on the same domain file and it will appear below the other site. If you want them side by side then duplicate your domain file and have one site per a domain file and they can then be side by side.

Set up apple Id with invalid email so can't validate new account. How can I edit account info when I can't sign in for anything? Thx

Set up apple Id with invalid email so can't validate new account. How can I edit account info when I can't sign in for anything? Thx

Hi Franklin777,
If you are having issues with your Apple ID, this article will get you started.
Frequently asked questions about Apple ID
The first step is to find and edit the Apple ID you created:
Apple ID: Finding your Apple ID
If you need to reset your security questions this article will help ...
The rescue email address is a different address than the one you use for your Apple ID.
Rescue email address and how to reset Apple ID security questions
You can edit or delete your rescue email address at My Apple ID. To edit your rescue email address:
Navigate to My Apple ID using your web browser.
Click "Manage your account"
When prompted, sign in using your Apple ID and password.
Click Password & Security
You'll be asked to answer 2 of your 3 security questions before you can make any modifications. If you are unable to remember your answers, you can choose to send an email to your rescue email to reset your security questions.
Hope you get back on track soon!
- Judy

How can I edit text tabs in Photoshop...?

how can I edit text tabs in Photoshop like in Illustrator that I can choose to view the tab rulers and edit the alignment on the tabs?
is it possible? otherwise I can't understand why I can use the tabs at all...
thanks!

No, tab-formatted text is not editable in the manner you desire. As for your question - tab is just a character like any other. You are simply taking a given kind of implementation for granted, nothing more, but that must not necessarily be the case for all programs. An evil programmer just could assign the tab key to forward delete or any other fancy function just as he could make your space key draw funky symbols from a different Unicode range, if you get my meaning... so simply take it the way it is. If editable formatting is high on your wishlist:
http://www.adobe.com/go/wish
Mylenium

Hello, How can I edit or delete a custom label in the contacts list on iOS 7.0.3 on iPhone 4S ?

Hello, How can I edit or delete a custom label in the contacts list on iOS 7.0.3 on iPhone 4S ?
i need it so muchhh!

Sort of depend on what you are trying to do precisely. In Edit mode, if you tap on any label, you will be given a list of options, plus an Add Custom Label option near the bottom of the list

How can I edit or delete a custom label in the contacts list on iOS 7 on iPhone 4S ?

How can I edit or delete a custom label in the contacts list on iOS 7 on iPhone 4S ?

Alfre311 wrote:
I've been trying to find a way to do this since I updated to IOS 7, and I've just found the solution/explanation, even tho is a bit heavy to carry out.
IOS 6 creates custom labels and save them giving you the option to delete them.
IOS 7 creates custom labels but don't save them, so there is no need to have the option to delete them.
But here comes the problem, if you have some custom labes saved in you Iphone / Ipad with IOS 6 and you update it to IOS 7, the device will keep those labels saved, but you wont be able to delete them.
I realized this by going to contacts on Icloud. There those labels that I had on my devices weren't there. So simply restoring your device and configuring it as a new one to later sync your Icloud Contacts, will solve the problem.
I know this post is old, but I might just try this with iOS 8. I have outdated custom labels that annoy me, because I still seem them in the list as options. If I get desperate enough, I may try your solution.

How can I Edit My Podcast? And why doesn't my new uploads show in iTunes?

My Rss feed is through soundcloud and I uploaded new files and they haven't appeared on my link in iTunes. Also, how can I edit my podcast page?

In fact your files do force a download - paste the URL into Safari's address bar and hit return - they will download rather than play inside the browser as they should. However they do play in the Store, so perhaps they've now instituted a workaround for that.
Your feed is at http://feeds.soundcloud.com/users/soundcloud:users:127918759/sounds.rss
There are four episodes, the latest being 25 February; all four appear in the Store and when subscribing.
If you want to amend the contents of the 'Description' column and the text you see when you click the 'i' next to it you need to amend the 'itunes:subtitle' and 'itunes:summary' tags respectively. The overall 'Description' which appears in the Store page above the episodes is carried in the 'itunes:summary' tag in the top section of the feed. If you want to amend these you will need to do so wherever you constructed the feed, presumably in Soundcloud. You cannot do so in iTunes itself, it simply reads what's in the feed.

How can i edit a clip or share it. I cant change the sencond the clips lasts or insert an image or a text! whats going on???

Similar Messages

Maybe you are looking for