How can I edit a still image so that I can float it over the video?

I would like to edit a still image so that I can float it over the video - How would I save the image in Photoshop so that just the image and not the background can be imported into Final Cut and the footage behind it still shows up?
Thanks

You need to either create an Alpha channel or cut out the area of interest and paste it into a transparent Photoshop document. You can save the former as PSD, TIFF or PNG. Save the latter as TIFF with transparency enabled (shows up in TIFF Options at step 2 of the save dialog).

Similar Messages

How can I edit lightroom 5 smart previews on mac book pro (mbp) when the lightroom 5 master image files are on my external hard drive is disconnected from the mbp

How can I edit lightroom 5 smart previews on mac book pro (mbp) when the lightroom 5 master image files are on my external hard drive is disconnected from the mbp? So far when I try to disconnect the external HD from the mbp, I get the following pop up window: The disk "external hard drive A" couldn't be ejected because "Lightroom" is using it. Quit that application and try to eject this disk again. When I do that and restart Lightroom 5, the Adobe Photoshop Lightroom - Select Catalog screen pops up but doesn't list my external hard drive A as a choice.
I've reviewed Adobe's Lightroom Help | Smart Previews Lightroom 5 web page and still haven't been able to figure what I'm doing wrong. Any help would be appreciated.

Your internal HDD. by default, is named 'Macintosh HD'. From what information you supplied, it looks like there is already a Lightroom catalog installed on you local (internal) HDD using the standard naming convention Adobe uses as well as a Lightroom catalog on your external drive which you created. To be sure of which catalog Lightroom is loading when it starts up, To do this, start Lightroom as you normally would. After it starts, select the Lightroom menu item, then select the Catalog Preferences item and finally, navigate to the General tab. The Location information will tell you exactly what catalog Lightroom is opening by default. This will likely be the Photography Mac Book Pro Versions catalog on your external HDD. Once that is confirmed, you are ready to proceed. As an additional test/verification, you can shut down Lightroom and, this time, start Lightroom while holding down the ALT/OPTION key. This will cause Lightroom to pause and display a screen which will allow you to chose a different catalog to open. Navigate to the /Users/[user name]/Pictures/Lightroom folder and select the Lightroom 5 Catalog.lrcat file. When Lightroom comes up, there should be no previews or folders as this catalog should be empty. Now you can be certain which catalog is being used and which catalog has all your data and you are ready to migrate your current catalog. Shut down Lightroom.
To migrate your current catalog, use Finder to locate your Photography Mac Book Pro Versions folder on your external drive. Select the folder and select COPY from the context menu. Next, use Finder to navigate to the /Users/[user name]/Pictures/Lightroom folder on you internal HDD. You can start at the Macintosh HD level and work your way down by opening each level (Macintosh HD/Users/[user name]/Pictures). Select the /Pictures folder and then select PASTE... from the context menu. When the COPY/PASTE is complete, you should see the following files on the Macintosh HD:
Macintosh HD/Users/[user name]/Pictures/Lightroom/ and
Macintosh HD/Users/[user name]/Pictures/Photography Mac Book Pro Versions
The Macintosh HD/Users/[user name]/Pictures/Lightroom folder will contain the empty default catalog the Adobe created when Lightroom was installed and Macintosh HD/Users/[user name]/Pictures/Photography Mac Book Pro Versions will contain a copy of the catalog you created on your external HDD.
You are almost done now. Make sure your external drive is still attached for this step. Restart Lightroom using the ALT/OPTION key again. When the Select Catalog screen appears, select the Choose a Different Catalog button (lower left side). When you do, a Finder window will open to allow you to navigate to a catalog of your choosing. Navigate to Macintosh HD/Users/[user name]/Pictures/Photography Mac Book Pro Versions and select the file Photography Mac Book Pro Version.lrcat. This is the copy you just created. Select the Open button and Lightroom should start. You should see all of your previews and settings just as before. Also, in the left hand panel, all of your folder should show up and none of them should be dimmed and none of your previews should display a small exclamation point badge. Either a dimmed folder name or an exclamation point badge indicates that Lightroom can't find the associated image file. If everything looks good, go to the Lightroom menu, select Preferences and then select the General tab. Under Default Catalog, select an option to either load the LAST catalog opened or select the Users/[user name]/Pictures/Photography Mac Book Pro Versions catalog from the drop down. Shut down Lightroom and then restart it normally. This time, when Lightroom starts, you should be viewing the new copy of your catalog. You can confirm this by looking at the General tab on the Catalog Preferences screen (Lightroom/Catalog Preferences menu items). Shut down Lightroom once again and this time, eject your external drive before restarting. This time, your folders in the left hand panel will be dimmed but you should be able to work with your smart previews. If Lightroom should display a Select Catalog screen with the external drive detached, double check your settings as it indicates Lightroom is still looking at the copy of the catalog on the external drive rather than the new copy you made.
Finally, if you are seeing dimmed folders and/or exclamation point badges with the external drive attached, this indicates a problem. You can select any folder and select Update Folder Location from the context menu. This will allow you to navigate to the copy on the external drive and select it. Lightroom will then update the catalog (select to synchronize the content). This will not only clear the dimmed folder problem but also remove the exclamation point badges for all photos in that missing folder. However, it may indicate that not all went well with the copy of the catalog so make sure to verify all went well. You can use the Get Info option on the two folders. You should see the same number of files/folders for both the copy on the internal drive as well as on the external drive but you can't rely on the byte count because of the possibility of differences between the geometry of the two drives. Hope this all helps!

Why can't I see still images in the playback monitor when editing a video?

Why can't I see still images in the playback monitor when editing a video? I have rendered the images in the project. I checked my system to make sure it meets all the requirements for the software, no problem there. When I "share" the project and save it as an MPEG, the images show up in WMP just fine. But I need to be able to see what I'm doing to the stills while I am editing. Help!

Gordon
Many thanks for the reply with the details.
But, the key is missing...what version of Premiere Elements are you using? Are you using Premiere Elements 10?
I hope not in this case, but if you are, we will tell you what needs to be done. The following is a copy/paste of the Announcement
at the top of this forum about the Premiere Elements 10/NVIDIA GeForce issue.
Premiere Elements 10 NVIDIA Video Card Driver Roll Back
If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing
Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling
back the video card driver version instead of assuring that it is up to date.
Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow
glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies
to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of
the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working Premiere
Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
http://forums.adobe.com/thread/1317675
Older NVIDIA GeForce drivers can be found
http://www.nvidia.com/Download/Find.aspx?lang=en-us
A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back
can be found
http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
Looking forward to your reply.
Thank you.
ATR

How can I take a still image from a video?

How can I take a still image from a video?

I'll assume you want to create a still to use outside FCPX, not a still frame within FCPX. It's kinda hidden in the "share." Go File/Share/Add Destination. You want "Save Current Frame." After you've created that destination, it'll be there for you in the future under Share.

How do i make a still image (photo) fit the length of the music? I record music and want to put the tracks to a video file with a still image of my business logo in the background. Any help?

How do I make a still image (photo) fit the length of the music? I record music and want to convert the tracks to a video file with a still image of my business logo in the background. On windows movie maker you could just select "fit to music" but this program isnt as easy to figure out! Any help?

Double-click on the still image in the project timeline to open the Inspector. In the Inspector, adjust the duration by typing in a new duration to match the length of your music. I think the limit for a still image is 10 minutes. If you need more than this, simply drag the image into the timeline again then adjust its duration. The two images will play seamlessly (no gap will be visible).
See this iMovie Help topic:
http://help.apple.com/imovie/#mov3a883915
You can achieve more precision when entering durations by changing a preference in the menu item iMovie Preferences. Check (tick) the preference for Show Time As HH:MM:SS:frames. This will enable you to enter the duration of stills down to the frame level, rather than full seconds (NTSC is 30 frames per second; PAL is 25 fps). When entering times, type a colon between each time segment, such as 2:50:15, which represents 2 minutes 50 seconds and 15 frames. For 5 seconds 20 frames you would enter 5:20 and so forth.
Note that the music will only run to the length of the video in the timeline (in your case, the still images). So, after increasing the stills duration you will need to drag the end of the music track as far as required. The stills can be dragged inwards to reduce the duration if necessary.
John
Message was edited by: John Cogdell - added Note

How to scan a hard copy to pdf that I can convert to word for editing?

I've got a HP deskjet 3050A and my operating system is Windows 7, how to scan a hard copy to pdf that I can convert to word for editing?
This question was solved.
View Solution.

Hi,
The software provided for your device does not include OCR functionality
You may use any 3rd part OCR solution to scan as editable text.
If you have Microsoft Office suite there is a good chance the office suite provide this kind of capabilities:
Office 2007 or 2010:
http://www.howtogeek.com/howto/14595/ocr-anything-with-onenote-2007-and-2010/
Office 2003:
http://agsci.psu.edu/it/how-to/perform-ocr-with-microsoft-office-2003-document-imaging
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Can I capture a still image from a quicktime movie?

Can I capture a still image from a quicktime movie?

Yes. But how you do it depends on your version of quicktime.
If you have the pro version, you can easily use the "Export" option to output the video as a series of images.
For the basic version of quicktime, or if you want to quickly take make a still image of a single frame, you could just use the "Grab" application in OSX to take a screen shot.
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh364.html

I changed my Apple ID, now I can't login to iCloud because it still has my old Apple ID and the password no longer works to log me in. How can I get back into iCloud so that I can switch off Find my iPhone so I can make these changes? Thank you.

I changed my Apple ID, now I can't login to iCloud because it still has my old Apple ID and the password no longer works to log me in. How can I get back into iCloud so that I can switch off Find my iPhone so I can make these changes? Thank you. (iPhone 4s)

Well, you're gonna have to recover the password for that Apple ID:
http://support.apple.com/kb/ht5787

How do I save a still image from video in imovie '11?

How do I save a still image from video in imovie '11?

See this User Tip by AppleMan1958 -
https://discussions.apple.com/docs/DOC-3231
John

In iMovie - can I add a still image over footage?

In iMovie - can I add a still image over footage?

Yes. Use the Cutaway feature.
http://www.kenstone.net/fcp_homepage/imovie_09_stone.html#cutaway%20pip

After editing a RAW image in PE13 I can't get it back into my iPhoto library. If edited in iPhoto first and sent to PE13 for adjustments, it can be sent back to iPhoto library. Ideas?

After editing a RAW image in PE13 I can't get it back into my iPhoto library. If edited first in iPhoto, and sent to PE13 for adjustments,
I can get it back into my iPhoto library. Ideas?

Thanks for answering my question. I always have had RAW checked to an external editor which is PE13 on my Preferences panel in iPhoto.
I probably didn't make myself clear. When I send an ORIGINAL RAW untouched, unedited image to PE13 and do the editing and the
adjustments- (it looks great) and then try and SAVE it and forward it to my iPhoto library, it will not be sent. On the other hand if any editing
at all is first performed in iPhoto and then sent to PE13 for adjustments, and I SAVE it, it asks if I want to Replace this new edited image with
what already exists in my iPhoto library, I click REPLACE, the little wheel spins, I go to iPhoto and the new image is there. PE13 does
accept an original RAW image for editing because it will save it in PE13 in the RECENTLY EDITED column. Ideas? I need to keep my iPhoto
library intact. Ideas? Thanks.

Edit one still image in PS and entire timeline needs re-rendering in FCP6

I've been using FCE 3.5 and FCP5 for quite some time. My projects usually have a large number of still image pct files in them. Before changingg to FCP6 (because I'm working on a 1080p project) when i would need to edit a still image that was already in my time;line, I would open it in Photoshop, make the changes, save it, and when I returned to FCP 5 or FCE3.5, only that portion of the timeline where the item appears would need to be re-rendered. But with FCP6, even if the edited image is only in aa small part of the timeline, the entire timeline is red and needs to be re-rendered. Any idea what is causing this major problem? I never change the dimensions of the file or the type. I might just adjust brightnesss ro do some in-painting, etc.

Cick anywhere in your timeline. Type Command + 0 {zero} to see your sequence settings. Either report those settings or post a screen shot here.
MtD

How do you create a still image from a video using IMovies 11?

How do you create a still image from a video using IMovies 11 on a Pro Mac?

The simplest way is to do a simple screen capture.

How do I set up my system so that I can program in C

How do I set up my system so that I can program in C,C ? Without using Xcode. Just want to write simple "hello, world" stuff. So far, my Mac seem oblivious to my efforts even though it seems that all the files are there.
At first, it could not find gcc. Then I added /Developer/usr/bin to the path and it seemed to find gcc.
Then it didn't find stdio.h. I added /Developer/SDKs/MacOSX10.6.sdk/usr/include/ to the path but it still doesn't find stdio.h
There must be a standard C setup that my Mac is not conformaing to. How can I get set up like a regular Unix system and do C programming like I used to?
Thanks,
JfromG

None of the responses/experiences seems to apply to me. Let me ask the question this way, because it's partly for my education and also I'd like to program in C. Let's say I have a Unix box and I want to program in C. What files need to be where in what directories? And why wouldn't that work on a Mac? My impression is that the Mac OS X 10.8 contains all I need, but it doesn't work. At least I don't think it does. I may be out in left field here. But surely, being a Unix box, I can get this machine to compile C code in something like the usual fashion. I don't need editors or development environments beyond the basic stuff - unless your telling me maybe I do! Anyway, just wondering what files need to go where in order to compile C programs. Thanks for you forbearance. I appreciate it.
JohnfromG

How can i unlock my granddaughter's iphone that one of her friends changed the password on and locked it? the phone is saying connect to itunes.

how can i unlock my granddaughter's iphone that one of her friends changed the password on and locked it? the phone is saying connect to itunes.

If disabled because of a passcode, and you have not synced AFTER setting the passcode, you will have to force the phone into recovery mode & restore it as a new device. All data on your phone will be erased:
Turn your phone off. Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new. In your case, setup as "new" will be your ONLY option.

How can I edit a still image so that I can float it over the video?

Similar Messages

Maybe you are looking for