How can i edit APN settings on 4s

how can i edit APN settings on 4s

The above post won't help you.
The iPhone already contains the correct APN settings for all supported carriers, & any updates to those settings are done automatically. Fact is, most carriers don't want users messing with these settings. As far as a carrier adding itself to this database, if not supported, doesn't work that way.
If you have an officially unlocked iPhone, & you're trying to use it with a non-supported carrier, you're gonna have to manually edit these settings. Directions here:
http://support.apple.com/kb/ht2283
And here:
http://support.apple.com/kb/ht4839
Or, you can go here:
http://www.unlockit.co.nz/unlockit/
That web site contains a collection of APN settings for non-supported carriers.

Similar Messages

How can I edit the privacy settings for my daughters Apple ID.

My daughter has forgotten her privacy settings. She has $80 in credit and would like to use them. How can she edit her privacy settings?

What do you mean by 'privacy settings' ?
If you mean the Settings > General > Restrictions passcode on her iPad then was it on the iPad when she last backed up ? If not then she can restore to that backup and it should be removed. If it was on the iPad when she last backed up then the only way to remove it is to reset the iPad back to factory defaults and she can then re-sync your content back to her iPad - she won't be able to restore to the backup as that will keep the code in place.
If you mean the answers to her security questions, then if she has a rescue email address (which is not the same thing as an alternate email address) on her account then the steps on this page will give you a reset link on her account : http://support.apple.com/kb/HT6170
If she doesn't have a rescue email address (she won't be able to add one until she can answer her questions) then sher will need to contact Support in her country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if she doesn't already have a rescue email address) sher can then use the steps on this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5620
If you mean something else ... ?

How can we handle browser settings while dealing with the security ?

Hi ,
how can we handle browser settings while dealing with the security ?When we configured security in web.xml , during the first request the container is asking for the authentication credentials once they are provided it go's on. but when the user gives a fresh request from the second window within the same browser that time it is not asking for authentication. How can we overcome this.Is there anything to do with server configurations?
How can we make the container no to keep the things or act like session?

Ya... I am taking a small example need not happen always but a kind of possibility i am thinking off.
once the user sign out and just left without closing the browser and a friend (suppose not a good friend ... just kidding...) of that user may open the same jsp or file .This time the security is breached. If that feature or property exists....
I know what you might say ... the user will log-out before leaving where a programer might invalidate the session at the time of log out.
Consider the case of a bad Programing or just a programer might forget to invalidate,At that time as a application administrator how can he solve that issue.
Thanks.......
Edited by: user8483670 on Jun 6, 2011 1:08 AM
Edited by: user8483670 on Jun 6, 2011 1:09 AM

How can I edit photos in iPhoto in Photoshop Elements? I select PE in iPhoto preferences but they stay in iPhoto for editing.

How can I edit photos in iPhoto in Photoshop Elements? I select PE in iPhoto preferences but they stay in iPhoto for editing.

Here's something you can try with a copy of your current library.
1 - go to iPhoto's Events preference pane and set the auto split option to 1 day per even.
2 - go the the Events mode, select all Events.
3 - go to the Events menu and and select Autosplit Selected Events.
which will give you an event for each day.
4 - again select all events (although it might be better do to fewer at a time) and export them to your desired destination via the File ➙ Export ➙ File Export menu option with the following settings:
The workflow above will produce a folder for each days photos with the date as the folder's title.

How can I edit lightroom 5 smart previews on mac book pro (mbp) when the lightroom 5 master image files are on my external hard drive is disconnected from the mbp

How can I edit lightroom 5 smart previews on mac book pro (mbp) when the lightroom 5 master image files are on my external hard drive is disconnected from the mbp? So far when I try to disconnect the external HD from the mbp, I get the following pop up window: The disk "external hard drive A" couldn't be ejected because "Lightroom" is using it. Quit that application and try to eject this disk again. When I do that and restart Lightroom 5, the Adobe Photoshop Lightroom - Select Catalog screen pops up but doesn't list my external hard drive A as a choice.
I've reviewed Adobe's Lightroom Help | Smart Previews Lightroom 5 web page and still haven't been able to figure what I'm doing wrong. Any help would be appreciated.

Your internal HDD. by default, is named 'Macintosh HD'. From what information you supplied, it looks like there is already a Lightroom catalog installed on you local (internal) HDD using the standard naming convention Adobe uses as well as a Lightroom catalog on your external drive which you created. To be sure of which catalog Lightroom is loading when it starts up, To do this, start Lightroom as you normally would. After it starts, select the Lightroom menu item, then select the Catalog Preferences item and finally, navigate to the General tab. The Location information will tell you exactly what catalog Lightroom is opening by default. This will likely be the Photography Mac Book Pro Versions catalog on your external HDD. Once that is confirmed, you are ready to proceed. As an additional test/verification, you can shut down Lightroom and, this time, start Lightroom while holding down the ALT/OPTION key. This will cause Lightroom to pause and display a screen which will allow you to chose a different catalog to open. Navigate to the /Users/[user name]/Pictures/Lightroom folder and select the Lightroom 5 Catalog.lrcat file. When Lightroom comes up, there should be no previews or folders as this catalog should be empty. Now you can be certain which catalog is being used and which catalog has all your data and you are ready to migrate your current catalog. Shut down Lightroom.
To migrate your current catalog, use Finder to locate your Photography Mac Book Pro Versions folder on your external drive. Select the folder and select COPY from the context menu. Next, use Finder to navigate to the /Users/[user name]/Pictures/Lightroom folder on you internal HDD. You can start at the Macintosh HD level and work your way down by opening each level (Macintosh HD/Users/[user name]/Pictures). Select the /Pictures folder and then select PASTE... from the context menu. When the COPY/PASTE is complete, you should see the following files on the Macintosh HD:
Macintosh HD/Users/[user name]/Pictures/Lightroom/ and
Macintosh HD/Users/[user name]/Pictures/Photography Mac Book Pro Versions
The Macintosh HD/Users/[user name]/Pictures/Lightroom folder will contain the empty default catalog the Adobe created when Lightroom was installed and Macintosh HD/Users/[user name]/Pictures/Photography Mac Book Pro Versions will contain a copy of the catalog you created on your external HDD.
You are almost done now. Make sure your external drive is still attached for this step. Restart Lightroom using the ALT/OPTION key again. When the Select Catalog screen appears, select the Choose a Different Catalog button (lower left side). When you do, a Finder window will open to allow you to navigate to a catalog of your choosing. Navigate to Macintosh HD/Users/[user name]/Pictures/Photography Mac Book Pro Versions and select the file Photography Mac Book Pro Version.lrcat. This is the copy you just created. Select the Open button and Lightroom should start. You should see all of your previews and settings just as before. Also, in the left hand panel, all of your folder should show up and none of them should be dimmed and none of your previews should display a small exclamation point badge. Either a dimmed folder name or an exclamation point badge indicates that Lightroom can't find the associated image file. If everything looks good, go to the Lightroom menu, select Preferences and then select the General tab. Under Default Catalog, select an option to either load the LAST catalog opened or select the Users/[user name]/Pictures/Photography Mac Book Pro Versions catalog from the drop down. Shut down Lightroom and then restart it normally. This time, when Lightroom starts, you should be viewing the new copy of your catalog. You can confirm this by looking at the General tab on the Catalog Preferences screen (Lightroom/Catalog Preferences menu items). Shut down Lightroom once again and this time, eject your external drive before restarting. This time, your folders in the left hand panel will be dimmed but you should be able to work with your smart previews. If Lightroom should display a Select Catalog screen with the external drive detached, double check your settings as it indicates Lightroom is still looking at the copy of the catalog on the external drive rather than the new copy you made.
Finally, if you are seeing dimmed folders and/or exclamation point badges with the external drive attached, this indicates a problem. You can select any folder and select Update Folder Location from the context menu. This will allow you to navigate to the copy on the external drive and select it. Lightroom will then update the catalog (select to synchronize the content). This will not only clear the dimmed folder problem but also remove the exclamation point badges for all photos in that missing folder. However, it may indicate that not all went well with the copy of the catalog so make sure to verify all went well. You can use the Get Info option on the two folders. You should see the same number of files/folders for both the copy on the internal drive as well as on the external drive but you can't rely on the byte count because of the possibility of differences between the geometry of the two drives. Hope this all helps!

How can i change the settings of play/pause in Elements 13?

Hello!
How can i change the settings of play/pause in Elements 13? I definitely need cursor back to the "start play" point each time i hit stop (spacebar), like it works in Sony Vegas or in most of audio editing software. Can somebody help?
Thanks!

invasion 21
The following is a copy of the reply that I posted to your question earlier today in the Adobe Premiere Pro Forum
invasion21
You are in the Adobe Premiere Pro Forum. What is your program? Is that Premiere Elements 13? If so, you are in the wrong forum where
Premiere Pro answers may not be appropriate for your Premiere Elements (any version) question.
You are not going to find what you are looking for in Premiere Elements preference settings.
You write
I WANT it playhead jump back to start play position, when i hit spacebar for pause.
You can maneuver yourself into that through Edit Menu/Keyboard Customization/Applications/ and its Help category which by
default shows
Go to Timeline/Clip Start, using Home
and
Play/Pause Toggle, using Space
But, you may find it is best to leave well enough alone. Explore and experiment with changing the keyboard shortcuts for the commands and decide what works for you.
ATR

How can i edit my contacts?and i dont really used my phone and its automatically add a contacts and email adds.. I dont know why that happen..i just turn my phone off and this is happen..

How can i edit my contacts?and i dont really used my phone and its automatically add a contacts and email adds.. I dont know why that happen..i just turn my phone off and this is happen..

Contacts are synced with a compatible programme in the computer; in the iCloud or with Yahoo and Google Mail. You can directly "edit" a contact on the phone and/or within the programme that you are syncing your contacts with.
Have you configured/setup mails on your iPhone? If yes, check the contents of the mail account(s) individually. (including iCloud) from SETTINGS - MAILS, CONTACTS, CALENDARS
"Contacts" if chosen from the mail account (s) would add email addresses to your contacts.
http://support.apple.com/kb/HT1296

How can I edit and save parts of songs (like a chorus).

How can I edit and save parts of songs (like a chorus).

The iTunes-only way is: figure out where you want your excerpt to begin and end. Right-click the track, Get Info, Options tab, set the Start/Stop times accordingly, and OK out. Right-click again, and choose Create XXX version (where XXX is the format indicated in your Import settings). Right-click one more time, and unset the Start/Stop times.
This procedure will leave the full track in place, and will create a new file and library entry with just your excerpt.

How can I programaticly change settings on a FP-PG-522

How can I programaticly change settings on a FP-PG-522 using Measurement
Studio
for Visual Basic and an FP-1000 module?
Is there a Measurement Studio for VisualBasic DAQ control to do this?

I am either in the wrong location or have a different layout than you.
Apple button > system preferences > keyboard and mouse > mouse tab > then all I have are the options to change the tracking speed, scrolling speed, double-click speed, and which button is required to zoom with the scroll wheel. The only drop-down menu I have on this screen is to select which button + scroll wheel allows me to zoom.
I am using version 10.5.6. Am I in the incorrect section of this forum?
Message was edited by: Coop772

Hi sir im using fcp 7 for video editing in i mac, how can i edit mts files in fcp 7 without log n transfer, is their solution for fcp 7?

Hi sir im using fcp 7 for video editing in i mac, how can i edit mts files in fcp 7 without log n transfer, is their solution for fcp 7?

>No, you are not right.
Going to question the biggest contributor to this forum? (Yes, my ego is talking). OK then...
>Install the QT-Plugin, restart your Mac and you will be able to import and use .mts files in FCP 7.
Sure...yes, that makes it POSSIBLE to read the files natively in FCP...if they come from a Panasonic camera. BUT...just try working with those files. Right away the system won't be nearly as responsive as it would if they were ProRes. First...there are no sequence settings for that format...so you'll have to use ProRes and have a green render bar. BUT, that's no big deal. The big deal is trying to work with the AVCHD format, which is VERY processor intensive...inside an application that doesn't like to work with much outside of the FCP editing codecs.
Is it possible? Sure? Will it work well...will you be as zippy and error free as if you converted to ProRes? Not by a long shot. OH, but don't just take my word for it. Go ahead...try it and see. No skin off my nose...no waste of my time. See how well this works.
I'm just here to relate real world working solutions to issues. And yes, I did try that plugin, and boy, was editing a pain.

How can i edit contacts in bulk

Bought an iPhone 5 and transfered contacts from my old phone and my phone contacts first and last name were reversed. How can I edit my address book contacts in bulk instead of one at a time? And then have these updates in my iPhone 5?

to any1 that wants to use the scripts and have them work just type "save" on the next like after end tell and itll do it........

How can I change the settings so when I delete an email from my iPhone it will also delete from my iPad.....very sick of deleting the same emails two times

How can I change the settings wit mail so that when I delete my Verizon email from my iPhone it will also delete from my iPad too.... Seems like I shouldn't have to delete my email in three places...iPhone ..iPad ...and desktop

Don't know which email host you are using, but if this is a POP account, you can't do it. If IMAP, then deleting one email should delete it on all other devices.

How can I edit multiple clips with different frame rates on the same timeline

how can I edit multiple clips with different frame rates on the same timeline

You do not want to edit material from different frame rates on one timeline. You CAN do this, but it is a very bad idea - and this is why.
Once you establish the sequence frame rate - lets say it is PAL material at 25fps, any material that you drop into the sequence other than 25 fps will have to be changed to play at 25 fps. If the material you add is NTSC (29.97), FCP will DROP 5 frames per sec to bring the frame rate down to 25 fps. Which 5 get thrown away? Every 6th one. This yields a funky cadence that becomes even more complex as as there are also interlaced fields (DV/NTSC is an interlaced format). Oh, and by the way, the image sizes are different as well. DV/PAL has 576 lines of resolution and DV/NTSC has 480. FCP has to scale up the NTSC to fit the PAL frame.
You do not want FCP adjusting these things on the fly. You want to do a thoughtful (and time consuming) conversion so that you end up with all your material in one format with the best possible image from the conversion process. Compressor can do an adequate job with Frame Controls turned on. The Natress Standards Conversion FCP plugin is another way to go. A third option is to find a post house that can do the conversion for you using a hardware based process.
The good news is, once everything is in the same format, editing it will be painless and the output process very quick.
Whatever frame rate/ image size you select, I'd suggest using ProRes for the codec. It is 4:2:2 color and will withstand color correction and composting with much more grace than any variant of DV based codecs.
Have fun.
x

My mother used to be the bill payer on my iTunes account so now every time I send an email from my iCloud account it sent with her name, how can I change the settings so emails are sent from myself?

My mother used to be the bill payer on my iTunes account so now every time I send an email from my iCloud account it sent with her name, how can I change the settings so emails are sent from myself?
I've changed the bill payer to myself but it stills says on emails that I sent that its from my mother.

In order for the "From" field to show you options on the "from" addresses available, you must set them up in the Preferences > Accounts first.
I can't show you a screen shot of the from field because I currently only have one account, so the from address used is the default. However, when I had more than one, then options will show up in your compose/reply window.
You'd need to add an account here:

How can I edit my website from another computer? and how can I create a new website next to the one, I have already? Can anyone help, please?

How can I edit my website from another computer? and how can I create a new website next to the one, I already have? Can anyone help, please?

Move the domain.sites file from one computer to the other.
The file is located under User/Library/Application Support/iWeb/domain.sites. Move this file to the same location on the other computer and double click and iWeb will open it. Remember, it is your User Library that you want and not your System Library, as you will not find iWeb there.
Just create a new site on the same domain file and it will appear below the other site. If you want them side by side then duplicate your domain file and have one site per a domain file and they can then be side by side.

How can i edit APN settings on 4s

Similar Messages

Maybe you are looking for