How can I edit in the middle of the video for FLV component

I have a video which my client wants me to cut in pieces. I see that I can set up starting and ending points in Media Encoder, i.e. cut out the part from beginning and end. Is there an option to cut out parts in the middle?
I am familiar with After Effects but my client doesn't want to invest in this program. Are there any smaller/cheaper programs which allow more video editing that AME if AME indeed can not do it?
Is there any other way to go about it?

Remember that an flv file is an already compressed video file, so you do not want to re-render (run the compression process) again unless you really know what you are doing..... the quality will only degrade.
Here is a FREE little utility that I use if I have to join several flvs together or slice one up into section. It does this all without re-rendering!
http://download.cnet.com/Moyea-FLV-Editor-Lite/3000-2168_4-10912717.html
But because it's free, you are not getting a full fledged digital video editing program, but it works GREAT for the limited job of joining multiple flvs or slicing up a single into multiple section... then saving each section as a separate file.
Best wishes,
Adninjastrator

Similar Messages

How can I edit my apple ID in the app store the enable update some applications because it not my own that is showing

How can I edit my apple ID in the app store the enable update some applications because it not my own that is showing

It sounds like some apps were purchased using another Apple ID.
ALL purchases are permanently associated with whatever Apple ID was used to originally obtain them. Apps can not be updated without knowledge of that ID and, more importantly, its password. Apple IDs can not be merged and purchases can not be transferred from one ID to another.

How can i edit payment method if i signed up for non payment

How can i edit payment method if i signed up for non payment?

Contact iTunes Customer Service and request assistance with your issue.
Apple Support iTunes Store Contact Us

How can I edit in a picture overlaying the video?

Like, say, I was playing a video, but I wanted to add a picture of an apple on the forehead of the screen. How can I go about this? Do I need another program?

If you have access to a ASP.net Web Server, then the submission could be FLATTENED with FDFToolkit.net and emailed without client-side email software by only using Adobe Reader.
For more information check out the following websites:
http://www.pdfemail.net/examples/
http://www.fdftoolkit.net/examples/

How can I turn an audio podcast into a video for Youtube using iMovie?

Hey there, guys.
I'm trying to turn a podcast I created in Garageband into a movie using iMovie so I can upload it to YouTube. Now, for the duration of this podcast, I simply want one picture to show on the screen. So, in other words, the cast goes for about 55 minutes, so for the entirity of these 55 minutes, I just want one picture to show. That's all. Just one picture for the duration of the cast. How can I achieve this seemingly simple task using iMovie? Your aid with this is very much appreciated.
Cheers.

You create selections based on color range.
Mylenium

How can I edit image duplicates without changing the original?

I have an imac 2.8ghz intel core duo, running iphoto '11.
Id like to edit a large number of images whilst keeping a seperate album of originals.
I've tried duplicating an album of images and then editing but the program edits all copies of the image in both albums.
Ive tried relabeling the images before editing but that doesnt work either,
any ideas?

1 - iPhoto NEVER modifies the original and at any time you can revert to it or see it in edit mode
2 - albums do not duplicat photos but are simply pointers to photos so they take no space so a change to the photo from any location changes it is all
3 - if you want two copies then duplicate the photo - generally it is uncessary
LN

How can I edit my iweb published site when the domain file is empty?

How can I edit my iweb site when the domain file opens up empty? I have the site backed up in mobile me, on my computer, and on an external hard drive.
How can I transfer these files into iweb?

Hi there,
To edit your site from one of your backed up versions, place the Domain file in User>Library>Application Support>iWeb & then launch iWeb. Update & publish.
Ben

Can I edit out the middle of a video clip in iMovie?

I know how to crop the beginning or end of a video, but I would like to crop out a section in the middle. I don't want to lose the part following the cropped frames. What must I do? Thanks for any advice you can offer. Miriam

Can I edit out the middle of a video clip in iMovie?
Yes.
What must I do?
Basically you have three options:
1) If the clip is in the "Event" window, simply select (i.e., set and adjust if necessary "in" and 'out" points) the segment you want and transfer it to your "Project" window and place it where you want it.
2) If the clip is already in the "Project" window, simply select (i.e., set and adjust if necessary "in" and 'out" points) the segment you want to keep...
a) and press the "Split" option in the edit menu (or the "Split Clip" option in the context menu) to divide the clip into three segments. Then select each of the segments you don't want and press the "Delete" key to remove them from the "Project" window.
b) or, even easier, simply press the "Trim to Selection" option in the "Edit" menu.
All of these work flows do not physically remove anything from the "Event" but merely perform a non-destructive edit of the project for the purpose of later output.

How can you edit a song in iTunes so that you can separate the part I want?

Some songs have LONG intros I'd like to edit out. For example, Elton John's Funeral for a friend/Love Lies Bleeding is only available as one track.
How can I edit out the FFAF part? (at least for the version I sync to my ipod.

Hey there,
One option is to change the songs starting time in iTunes. To change when a song starts and ends locate and highlight the song in iTunes. From there, right->click the song and choose "Get Info" from the Menu. When the window pops up, head over to the Options tab and in the middle of the window there are options to adjust the starting and ending times for that song or songs. When you are satisfied, go ahead and hit OK to apply the changes.
From there, sync the updates to your iPod.
Hope this helped.
B-rock

How can I edit multiple clips with different frame rates on the same timeline

how can I edit multiple clips with different frame rates on the same timeline

You do not want to edit material from different frame rates on one timeline. You CAN do this, but it is a very bad idea - and this is why.
Once you establish the sequence frame rate - lets say it is PAL material at 25fps, any material that you drop into the sequence other than 25 fps will have to be changed to play at 25 fps. If the material you add is NTSC (29.97), FCP will DROP 5 frames per sec to bring the frame rate down to 25 fps. Which 5 get thrown away? Every 6th one. This yields a funky cadence that becomes even more complex as as there are also interlaced fields (DV/NTSC is an interlaced format). Oh, and by the way, the image sizes are different as well. DV/PAL has 576 lines of resolution and DV/NTSC has 480. FCP has to scale up the NTSC to fit the PAL frame.
You do not want FCP adjusting these things on the fly. You want to do a thoughtful (and time consuming) conversion so that you end up with all your material in one format with the best possible image from the conversion process. Compressor can do an adequate job with Frame Controls turned on. The Natress Standards Conversion FCP plugin is another way to go. A third option is to find a post house that can do the conversion for you using a hardware based process.
The good news is, once everything is in the same format, editing it will be painless and the output process very quick.
Whatever frame rate/ image size you select, I'd suggest using ProRes for the codec. It is 4:2:2 color and will withstand color correction and composting with much more grace than any variant of DV based codecs.
Have fun.
x

How can I edit lightroom 5 smart previews on mac book pro (mbp) when the lightroom 5 master image files are on my external hard drive is disconnected from the mbp

How can I edit lightroom 5 smart previews on mac book pro (mbp) when the lightroom 5 master image files are on my external hard drive is disconnected from the mbp? So far when I try to disconnect the external HD from the mbp, I get the following pop up window: The disk "external hard drive A" couldn't be ejected because "Lightroom" is using it. Quit that application and try to eject this disk again. When I do that and restart Lightroom 5, the Adobe Photoshop Lightroom - Select Catalog screen pops up but doesn't list my external hard drive A as a choice.
I've reviewed Adobe's Lightroom Help | Smart Previews Lightroom 5 web page and still haven't been able to figure what I'm doing wrong. Any help would be appreciated.

Your internal HDD. by default, is named 'Macintosh HD'. From what information you supplied, it looks like there is already a Lightroom catalog installed on you local (internal) HDD using the standard naming convention Adobe uses as well as a Lightroom catalog on your external drive which you created. To be sure of which catalog Lightroom is loading when it starts up, To do this, start Lightroom as you normally would. After it starts, select the Lightroom menu item, then select the Catalog Preferences item and finally, navigate to the General tab. The Location information will tell you exactly what catalog Lightroom is opening by default. This will likely be the Photography Mac Book Pro Versions catalog on your external HDD. Once that is confirmed, you are ready to proceed. As an additional test/verification, you can shut down Lightroom and, this time, start Lightroom while holding down the ALT/OPTION key. This will cause Lightroom to pause and display a screen which will allow you to chose a different catalog to open. Navigate to the /Users/[user name]/Pictures/Lightroom folder and select the Lightroom 5 Catalog.lrcat file. When Lightroom comes up, there should be no previews or folders as this catalog should be empty. Now you can be certain which catalog is being used and which catalog has all your data and you are ready to migrate your current catalog. Shut down Lightroom.
To migrate your current catalog, use Finder to locate your Photography Mac Book Pro Versions folder on your external drive. Select the folder and select COPY from the context menu. Next, use Finder to navigate to the /Users/[user name]/Pictures/Lightroom folder on you internal HDD. You can start at the Macintosh HD level and work your way down by opening each level (Macintosh HD/Users/[user name]/Pictures). Select the /Pictures folder and then select PASTE... from the context menu. When the COPY/PASTE is complete, you should see the following files on the Macintosh HD:
Macintosh HD/Users/[user name]/Pictures/Lightroom/ and
Macintosh HD/Users/[user name]/Pictures/Photography Mac Book Pro Versions
The Macintosh HD/Users/[user name]/Pictures/Lightroom folder will contain the empty default catalog the Adobe created when Lightroom was installed and Macintosh HD/Users/[user name]/Pictures/Photography Mac Book Pro Versions will contain a copy of the catalog you created on your external HDD.
You are almost done now. Make sure your external drive is still attached for this step. Restart Lightroom using the ALT/OPTION key again. When the Select Catalog screen appears, select the Choose a Different Catalog button (lower left side). When you do, a Finder window will open to allow you to navigate to a catalog of your choosing. Navigate to Macintosh HD/Users/[user name]/Pictures/Photography Mac Book Pro Versions and select the file Photography Mac Book Pro Version.lrcat. This is the copy you just created. Select the Open button and Lightroom should start. You should see all of your previews and settings just as before. Also, in the left hand panel, all of your folder should show up and none of them should be dimmed and none of your previews should display a small exclamation point badge. Either a dimmed folder name or an exclamation point badge indicates that Lightroom can't find the associated image file. If everything looks good, go to the Lightroom menu, select Preferences and then select the General tab. Under Default Catalog, select an option to either load the LAST catalog opened or select the Users/[user name]/Pictures/Photography Mac Book Pro Versions catalog from the drop down. Shut down Lightroom and then restart it normally. This time, when Lightroom starts, you should be viewing the new copy of your catalog. You can confirm this by looking at the General tab on the Catalog Preferences screen (Lightroom/Catalog Preferences menu items). Shut down Lightroom once again and this time, eject your external drive before restarting. This time, your folders in the left hand panel will be dimmed but you should be able to work with your smart previews. If Lightroom should display a Select Catalog screen with the external drive detached, double check your settings as it indicates Lightroom is still looking at the copy of the catalog on the external drive rather than the new copy you made.
Finally, if you are seeing dimmed folders and/or exclamation point badges with the external drive attached, this indicates a problem. You can select any folder and select Update Folder Location from the context menu. This will allow you to navigate to the copy on the external drive and select it. Lightroom will then update the catalog (select to synchronize the content). This will not only clear the dimmed folder problem but also remove the exclamation point badges for all photos in that missing folder. However, it may indicate that not all went well with the copy of the catalog so make sure to verify all went well. You can use the Get Info option on the two folders. You should see the same number of files/folders for both the copy on the internal drive as well as on the external drive but you can't rely on the byte count because of the possibility of differences between the geometry of the two drives. Hope this all helps!

How can I set a passcode that is only required at certain times of the day. Ie: my child needs access for school use, but don't want her playing iPad in the middle of the night. I cannot identify a way to have the iPad turn off or require a password

I cannot find a way to enable my child's iPad to require a passcode only at certain times of the day.
Yes I have used the clock/timer/ countdown - great to restrict how many minutes of iPad usage they get a day.
But as my child requires the iPad in school for class lessons the usage at school varies maybe 30 mins 1 day and a few hrs on other days
I want the ability to say set the iPad to not work between say 7pm and 7am, ( unless a passcode is entered) so my child isn't playing games on it in the middle of the night...
Apple I cannot see anything in the settings that performs this function
Help

You can Remote Lock his iPad with Find My iPad using a computer at whatever time you like.
http://support.apple.com/kb/PH2700
Note: The iPad may be disabled if he tries the passcode too many times.

How can I edit my website from another computer? and how can I create a new website next to the one, I have already? Can anyone help, please?

How can I edit my website from another computer? and how can I create a new website next to the one, I already have? Can anyone help, please?

Move the domain.sites file from one computer to the other.
The file is located under User/Library/Application Support/iWeb/domain.sites. Move this file to the same location on the other computer and double click and iWeb will open it. Remember, it is your User Library that you want and not your System Library, as you will not find iWeb there.
Just create a new site on the same domain file and it will appear below the other site. If you want them side by side then duplicate your domain file and have one site per a domain file and they can then be side by side.

Can anyone tell me how to fix my iPod. I was updating it and I turned it off in the middle of the update. I tried to put it through a recovery on the iTunes but it keeps giving me 3194.When I turn it on it will go to a light blue screen.

Can anyone tell me how to fix my iPod.I was updating it and I turned it off in the middle of the update. I tried to put it through a recovery on the iTunes but it keeps giving me 3194.When I turn it on it will go to a light blue screen.

See the action for that error included here:
iTunes: Specific update-and-restore error messages and advanced troubleshooting

Hello, How can I edit or delete a custom label in the contacts list on iOS 7.0.3 on iPhone 4S ?

Hello, How can I edit or delete a custom label in the contacts list on iOS 7.0.3 on iPhone 4S ?
i need it so muchhh!

Sort of depend on what you are trying to do precisely. In Edit mode, if you tap on any label, you will be given a list of options, plus an Add Custom Label option near the bottom of the list

How can I edit in the middle of the video for FLV component

Similar Messages

Maybe you are looking for